hikey: Add UEFI sources for reference
UEFI needs to be built outside Android build system.
Please follow the instructions in README.
The sources correspond to:
https://github.com/96boards/edk2/commit/14eae0c12e71fd33c4c0fc51e4475e8db02566cf
https://github.com/96boards/arm-trusted-firmware/commit/e9b4909dcd75fc4ae7041cfb83d28ab9adb7afdf
https://github.com/96boards/l-loader/commit/6b784ad5c4ab00e2b1c6f53cd5f74054e5d00a78
https://git.linaro.org/uefi/uefi-tools.git/commit/abe618f8ab72034fff1ce46c9c006a2c6bd40a7e
Change-Id: Ieeefdb63e673e0c8e64e0a1f02c7bddc63b2c7fb
Signed-off-by: Vishal Bhoj <vishal.bhoj@linaro.org>
diff --git a/uefi/linaro-edk2/MdePkg/Include/Protocol/MpService.h b/uefi/linaro-edk2/MdePkg/Include/Protocol/MpService.h
new file mode 100644
index 0000000..5934727
--- /dev/null
+++ b/uefi/linaro-edk2/MdePkg/Include/Protocol/MpService.h
@@ -0,0 +1,632 @@
+/** @file
+ When installed, the MP Services Protocol produces a collection of services
+ that are needed for MP management.
+
+ The MP Services Protocol provides a generalized way of performing following tasks:
+ - Retrieving information of multi-processor environment and MP-related status of
+ specific processors.
+ - Dispatching user-provided function to APs.
+ - Maintain MP-related processor status.
+
+ The MP Services Protocol must be produced on any system with more than one logical
+ processor.
+
+ The Protocol is available only during boot time.
+
+ MP Services Protocol is hardware-independent. Most of the logic of this protocol
+ is architecturally neutral. It abstracts the multi-processor environment and
+ status of processors, and provides interfaces to retrieve information, maintain,
+ and dispatch.
+
+ MP Services Protocol may be consumed by ACPI module. The ACPI module may use this
+ protocol to retrieve data that are needed for an MP platform and report them to OS.
+ MP Services Protocol may also be used to program and configure processors, such
+ as MTRR synchronization for memory space attributes setting in DXE Services.
+ MP Services Protocol may be used by non-CPU DXE drivers to speed up platform boot
+ by taking advantage of the processing capabilities of the APs, for example, using
+ APs to help test system memory in parallel with other device initialization.
+ Diagnostics applications may also use this protocol for multi-processor.
+
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials are licensed and made available under
+the terms and conditions of the BSD License that accompanies this distribution.
+The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php.
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ This Protocol is defined in the UEFI Platform Initialization Specification 1.2,
+ Volume 2:Driver Execution Environment Core Interface.
+
+**/
+
+#ifndef _MP_SERVICE_PROTOCOL_H_
+#define _MP_SERVICE_PROTOCOL_H_
+
+///
+/// Global ID for the EFI_MP_SERVICES_PROTOCOL.
+///
+#define EFI_MP_SERVICES_PROTOCOL_GUID \
+ { \
+ 0x3fdda605, 0xa76e, 0x4f46, {0xad, 0x29, 0x12, 0xf4, 0x53, 0x1b, 0x3d, 0x08} \
+ }
+
+///
+/// Forward declaration for the EFI_MP_SERVICES_PROTOCOL.
+///
+typedef struct _EFI_MP_SERVICES_PROTOCOL EFI_MP_SERVICES_PROTOCOL;
+
+///
+/// Terminator for a list of failed CPUs returned by StartAllAPs().
+///
+#define END_OF_CPU_LIST 0xffffffff
+
+///
+/// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and
+/// indicates whether the processor is playing the role of BSP. If the bit is 1,
+/// then the processor is BSP. Otherwise, it is AP.
+///
+#define PROCESSOR_AS_BSP_BIT 0x00000001
+
+///
+/// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and
+/// indicates whether the processor is enabled. If the bit is 1, then the
+/// processor is enabled. Otherwise, it is disabled.
+///
+#define PROCESSOR_ENABLED_BIT 0x00000002
+
+///
+/// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and
+/// indicates whether the processor is healthy. If the bit is 1, then the
+/// processor is healthy. Otherwise, some fault has been detected for the processor.
+///
+#define PROCESSOR_HEALTH_STATUS_BIT 0x00000004
+
+///
+/// Structure that describes the pyhiscal location of a logical CPU.
+///
+typedef struct {
+ ///
+ /// Zero-based physical package number that identifies the cartridge of the processor.
+ ///
+ UINT32 Package;
+ ///
+ /// Zero-based physical core number within package of the processor.
+ ///
+ UINT32 Core;
+ ///
+ /// Zero-based logical thread number within core of the processor.
+ ///
+ UINT32 Thread;
+} EFI_CPU_PHYSICAL_LOCATION;
+
+///
+/// Structure that describes information about a logical CPU.
+///
+typedef struct {
+ ///
+ /// The unique processor ID determined by system hardware. For IA32 and X64,
+ /// the processor ID is the same as the Local APIC ID. Only the lower 8 bits
+ /// are used, and higher bits are reserved. For IPF, the lower 16 bits contains
+ /// id/eid, and higher bits are reserved.
+ ///
+ UINT64 ProcessorId;
+ ///
+ /// Flags indicating if the processor is BSP or AP, if the processor is enabled
+ /// or disabled, and if the processor is healthy. Bits 3..31 are reserved and
+ /// must be 0.
+ ///
+ /// <pre>
+ /// BSP ENABLED HEALTH Description
+ /// === ======= ====== ===================================================
+ /// 0 0 0 Unhealthy Disabled AP.
+ /// 0 0 1 Healthy Disabled AP.
+ /// 0 1 0 Unhealthy Enabled AP.
+ /// 0 1 1 Healthy Enabled AP.
+ /// 1 0 0 Invalid. The BSP can never be in the disabled state.
+ /// 1 0 1 Invalid. The BSP can never be in the disabled state.
+ /// 1 1 0 Unhealthy Enabled BSP.
+ /// 1 1 1 Healthy Enabled BSP.
+ /// </pre>
+ ///
+ UINT32 StatusFlag;
+ ///
+ /// The physical location of the processor, including the physical package number
+ /// that identifies the cartridge, the physical core number within package, and
+ /// logical thread number within core.
+ ///
+ EFI_CPU_PHYSICAL_LOCATION Location;
+} EFI_PROCESSOR_INFORMATION;
+
+/**
+ This service retrieves the number of logical processor in the platform
+ and the number of those logical processors that are enabled on this boot.
+ This service may only be called from the BSP.
+
+ This function is used to retrieve the following information:
+ - The number of logical processors that are present in the system.
+ - The number of enabled logical processors in the system at the instant
+ this call is made.
+
+ Because MP Service Protocol provides services to enable and disable processors
+ dynamically, the number of enabled logical processors may vary during the
+ course of a boot session.
+
+ If this service is called from an AP, then EFI_DEVICE_ERROR is returned.
+ If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then
+ EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors
+ is returned in NumberOfProcessors, the number of currently enabled processor
+ is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[out] NumberOfProcessors Pointer to the total number of logical
+ processors in the system, including the BSP
+ and disabled APs.
+ @param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical
+ processors that exist in system, including
+ the BSP.
+
+ @retval EFI_SUCCESS The number of logical processors and enabled
+ logical processors was retrieved.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.
+ @retval EFI_INVALID_PARAMETER NumberOfEnabledProcessors is NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS)(
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ OUT UINTN *NumberOfProcessors,
+ OUT UINTN *NumberOfEnabledProcessors
+ );
+
+/**
+ Gets detailed MP-related information on the requested processor at the
+ instant this call is made. This service may only be called from the BSP.
+
+ This service retrieves detailed MP-related information about any processor
+ on the platform. Note the following:
+ - The processor information may change during the course of a boot session.
+ - The information presented here is entirely MP related.
+
+ Information regarding the number of caches and their sizes, frequency of operation,
+ slot numbers is all considered platform-related information and is not provided
+ by this service.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] ProcessorNumber The handle number of processor.
+ @param[out] ProcessorInfoBuffer A pointer to the buffer where information for
+ the requested processor is deposited.
+
+ @retval EFI_SUCCESS Processor information was returned.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist in the platform.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_MP_SERVICES_GET_PROCESSOR_INFO)(
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer
+ );
+
+/**
+ This service executes a caller provided function on all enabled APs. APs can
+ run either simultaneously or one at a time in sequence. This service supports
+ both blocking and non-blocking requests. The non-blocking requests use EFI
+ events so the BSP can detect when the APs have finished. This service may only
+ be called from the BSP.
+
+ This function is used to dispatch all the enabled APs to the function specified
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned
+ immediately and Procedure is not started on any AP.
+
+ If SingleThread is TRUE, all the enabled APs execute the function specified by
+ Procedure one by one, in ascending order of processor handle number. Otherwise,
+ all the enabled APs execute the function specified by Procedure simultaneously.
+
+ If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all
+ APs finish or TimeoutInMicroSecs expires. Otherwise, execution is in non-blocking
+ mode, and the BSP returns from this service without waiting for APs. If a
+ non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled, then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. All enabled APs
+ are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its
+ content points to the list of processor handle numbers in which Procedure was
+ terminated.
+
+ Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ to make sure that the nature of the code that is executed on the BSP and the
+ dispatched APs is well controlled. The MP Services Protocol does not guarantee
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in
+ parallel are limited to certain independent tasks and well-controlled exclusive
+ code. EFI services and protocols may not be called by APs unless otherwise
+ specified.
+
+ In blocking execution mode, BSP waits until all APs finish or
+ TimeoutInMicroSeconds expires.
+
+ In non-blocking execution mode, BSP is freed to return to the caller and then
+ proceed to the next task without having to wait for APs. The following
+ sequence needs to occur in a non-blocking execution mode:
+
+ -# The caller that intends to use this MP Services Protocol in non-blocking
+ mode creates WaitEvent by calling the EFI CreateEvent() service. The caller
+ invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent
+ is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests
+ the function specified by Procedure to be started on all the enabled APs,
+ and releases the BSP to continue with other tasks.
+ -# The caller can use the CheckEvent() and WaitForEvent() services to check
+ the state of the WaitEvent created in step 1.
+ -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP
+ Service signals WaitEvent by calling the EFI SignalEvent() function. If
+ FailedCpuList is not NULL, its content is available when WaitEvent is
+ signaled. If all APs returned from Procedure prior to the timeout, then
+ FailedCpuList is set to NULL. If not all APs return from Procedure before
+ the timeout, then FailedCpuList is filled in with the list of the failed
+ APs. The buffer is allocated by MP Service Protocol using AllocatePool().
+ It is the caller's responsibility to free the buffer with FreePool() service.
+ -# This invocation of SignalEvent() function informs the caller that invoked
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed
+ the specified task or a timeout occurred. The contents of FailedCpuList
+ can be examined to determine which APs did not complete the specified task
+ prior to the timeout.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroSeconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure, or TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,
+ if all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+ The buffer is allocated by MP Service Protocol,
+ and it's the caller's responsibility to
+ free the buffer with FreePool() service.
+ In blocking mode, it is ready for consumption
+ when the call returns. In non-blocking mode,
+ it is ready when WaitEvent is signaled. The
+ list of failed CPU is terminated by
+ END_OF_CPU_LIST.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_MP_SERVICES_STARTUP_ALL_APS)(
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroSeconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ );
+
+/**
+ This service lets the caller get one enabled AP to execute a caller-provided
+ function. The caller can request the BSP to either wait for the completion
+ of the AP or just proceed with the next task by using the EFI event mechanism.
+ See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking
+ execution support. This service may only be called from the BSP.
+
+ This function is used to dispatch one enabled AP to the function specified by
+ Procedure passing in the argument specified by ProcedureArgument. If WaitEvent
+ is NULL, execution is in blocking mode. The BSP waits until the AP finishes or
+ TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode.
+ BSP proceeds to the next task without waiting for the AP. If a non-blocking mode
+ is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled,
+ then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before the AP returns
+ from Procedure, then execution of Procedure by the AP is terminated. The AP is
+ available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() and
+ EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] ProcessorNumber The handle number of the AP. The range is
+ from 0 to the total number of logical
+ processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroSeconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure or TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] Finished If NULL, this parameter is ignored. In
+ blocking mode, this parameter is ignored.
+ In non-blocking mode, if AP returns from
+ Procedure before the timeout expires, its
+ content is set to TRUE. Otherwise, the
+ value is set to FALSE. The caller can
+ determine if the AP returned from Procedure
+ by evaluating this value.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before
+ the timeout expires.
+ @retval EFI_SUCCESS In non-blocking mode, the function has been
+ dispatched to specified AP.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ the specified AP has finished.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_MP_SERVICES_STARTUP_THIS_AP)(
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT BOOLEAN *Finished OPTIONAL
+ );
+
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be performed
+ by the current BSP.
+
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. The new BSP can take over the
+ execution of the old BSP and continue seamlessly from where the old one left
+ off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled.
+
+ If the BSP cannot be switched prior to the return from this service, then
+ EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
+ enabled AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to
+ this service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_SUCCESS The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
+ a disabled AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_MP_SERVICES_SWITCH_BSP)(
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ );
+
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ This service allows the caller enable or disable an AP from this point onward.
+ The caller can optionally specify the health status of the AP by Health. If
+ an AP is being disabled, then the state of the disabled AP is implementation
+ dependent. If an AP is enabled, then the implementation must guarantee that a
+ complete initialization sequence is performed on the AP, so the AP is in a state
+ that is compatible with an MP operating system. This service may not be supported
+ after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled.
+
+ If the enable or disable AP operation cannot be completed prior to the return
+ from this service, then EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP. This flag
+ corresponds to StatusFlag defined in
+ EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All other
+ bits are ignored. If it is NULL, this parameter
+ is ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed
+ prior to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_MP_SERVICES_ENABLEDISABLEAP)(
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ );
+
+/**
+ This return the handle number for the calling processor. This service may be
+ called from the BSP and APs.
+
+ This service returns the processor handle number for the calling processor.
+ The returned value is in the range from 0 to the total number of logical
+ processors minus 1. The total number of logical processors can be retrieved
+ with EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be
+ called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER
+ is returned. Otherwise, the current processors handle number is returned in
+ ProcessorNumber, and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+
+ @retval EFI_SUCCESS The current processor handle number was returned
+ in ProcessorNumber.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_MP_SERVICES_WHOAMI)(
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ OUT UINTN *ProcessorNumber
+ );
+
+///
+/// When installed, the MP Services Protocol produces a collection of services
+/// that are needed for MP management.
+///
+/// Before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, the module
+/// that produces this protocol is required to place all APs into an idle state
+/// whenever the APs are disabled or the APs are not executing code as requested
+/// through the StartupAllAPs() or StartupThisAP() services. The idle state of
+/// an AP before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled is
+/// implementation dependent.
+///
+/// After the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, all the APs
+/// must be placed in the OS compatible CPU state as defined by the UEFI
+/// Specification. Implementations of this protocol may use the UEFI event
+/// EFI_EVENT_GROUP_READY_TO_BOOT to force APs into the OS compatible state as
+/// defined by the UEFI Specification. Modules that use this protocol must
+/// guarantee that all non-blocking mode requests on all APs have been completed
+/// before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled. Since the
+/// order that event notification functions in the same event group are executed
+/// is not deterministic, an event of type EFI_EVENT_GROUP_READY_TO_BOOT cannot
+/// be used to guarantee that APs have completed their non-blocking mode requests.
+///
+/// When the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, the StartAllAPs()
+/// and StartupThisAp() services must no longer support non-blocking mode requests.
+/// The support for SwitchBSP() and EnableDisableAP() may no longer be supported
+/// after this event is signaled. Since UEFI Applications and UEFI OS Loaders
+/// execute after the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, these
+/// UEFI images must be aware that the functionality of this protocol may be reduced.
+///
+struct _EFI_MP_SERVICES_PROTOCOL {
+ EFI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS GetNumberOfProcessors;
+ EFI_MP_SERVICES_GET_PROCESSOR_INFO GetProcessorInfo;
+ EFI_MP_SERVICES_STARTUP_ALL_APS StartupAllAPs;
+ EFI_MP_SERVICES_STARTUP_THIS_AP StartupThisAP;
+ EFI_MP_SERVICES_SWITCH_BSP SwitchBSP;
+ EFI_MP_SERVICES_ENABLEDISABLEAP EnableDisableAP;
+ EFI_MP_SERVICES_WHOAMI WhoAmI;
+};
+
+extern EFI_GUID gEfiMpServiceProtocolGuid;
+
+#endif