hikey: Add UEFI sources for reference
UEFI needs to be built outside Android build system.
Please follow the instructions in README.
The sources correspond to:
https://github.com/96boards/edk2/commit/14eae0c12e71fd33c4c0fc51e4475e8db02566cf
https://github.com/96boards/arm-trusted-firmware/commit/e9b4909dcd75fc4ae7041cfb83d28ab9adb7afdf
https://github.com/96boards/l-loader/commit/6b784ad5c4ab00e2b1c6f53cd5f74054e5d00a78
https://git.linaro.org/uefi/uefi-tools.git/commit/abe618f8ab72034fff1ce46c9c006a2c6bd40a7e
Change-Id: Ieeefdb63e673e0c8e64e0a1f02c7bddc63b2c7fb
Signed-off-by: Vishal Bhoj <vishal.bhoj@linaro.org>
diff --git a/uefi/linaro-edk2/PcAtChipsetPkg/HpetTimerDxe/HpetTimer.c b/uefi/linaro-edk2/PcAtChipsetPkg/HpetTimerDxe/HpetTimer.c
new file mode 100644
index 0000000..e23a2c8
--- /dev/null
+++ b/uefi/linaro-edk2/PcAtChipsetPkg/HpetTimerDxe/HpetTimer.c
@@ -0,0 +1,988 @@
+/** @file
+ Timer Architectural Protocol module using High Precesion Event Timer (HPET)
+
+ Copyright (c) 2011 - 2014, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <PiDxe.h>
+
+#include <Protocol/Cpu.h>
+#include <Protocol/Timer.h>
+
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/LocalApicLib.h>
+#include <Library/IoApicLib.h>
+
+#include <Register/LocalApic.h>
+#include <Register/IoApic.h>
+#include <Register/Hpet.h>
+
+///
+/// Define value for an invalid HPET Timer index.
+///
+#define HPET_INVALID_TIMER_INDEX 0xff
+
+///
+/// Timer Architectural Protocol function prototypes.
+///
+
+/**
+ This function registers the handler NotifyFunction so it is called every time
+ the timer interrupt fires. It also passes the amount of time since the last
+ handler call to the NotifyFunction. If NotifyFunction is NULL, then the
+ handler is unregistered. If the handler is registered, then EFI_SUCCESS is
+ returned. If the CPU does not support registering a timer interrupt handler,
+ then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
+ when a handler is already registered, then EFI_ALREADY_STARTED is returned.
+ If an attempt is made to unregister a handler when a handler is not registered,
+ then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
+ register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
+ is returned.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param NotifyFunction The function to call when a timer interrupt fires.
+ This function executes at TPL_HIGH_LEVEL. The DXE
+ Core will register a handler for the timer interrupt,
+ so it can know how much time has passed. This
+ information is used to signal timer based events.
+ NULL will unregister the handler.
+
+ @retval EFI_SUCCESS The timer handler was registered.
+ @retval EFI_UNSUPPORTED The platform does not support timer interrupts.
+ @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
+ registered.
+ @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
+ previously registered.
+ @retval EFI_DEVICE_ERROR The timer handler could not be registered.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverRegisterHandler (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN EFI_TIMER_NOTIFY NotifyFunction
+ );
+
+/**
+ This function adjusts the period of timer interrupts to the value specified
+ by TimerPeriod. If the timer period is updated, then the selected timer
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
+ If an error occurs while attempting to update the timer period, then the
+ timer hardware will be put back in its state prior to this call, and
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
+ is disabled. This is not the same as disabling the CPU's interrupts.
+ Instead, it must either turn off the timer hardware, or it must adjust the
+ interrupt controller so that a CPU interrupt is not generated when the timer
+ interrupt fires.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod The rate to program the timer interrupt in 100 nS units.
+ If the timer hardware is not programmable, then
+ EFI_UNSUPPORTED is returned. If the timer is programmable,
+ then the timer period will be rounded up to the nearest
+ timer period that is supported by the timer hardware.
+ If TimerPeriod is set to 0, then the timer interrupts
+ will be disabled.
+
+ @retval EFI_SUCCESS The timer period was changed.
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverSetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN UINT64 TimerPeriod
+ );
+
+/**
+ This function retrieves the period of timer interrupts in 100 ns units,
+ returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
+ is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
+ returned, then the timer is currently disabled.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units.
+ If 0 is returned, then the timer is currently disabled.
+
+ @retval EFI_SUCCESS The timer period was returned in TimerPeriod.
+ @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ OUT UINT64 *TimerPeriod
+ );
+
+/**
+ This function generates a soft timer interrupt. If the platform does not support soft
+ timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
+ If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
+ service, then a soft timer interrupt will be generated. If the timer interrupt is
+ enabled when this service is called, then the registered handler will be invoked. The
+ registered handler should not be able to distinguish a hardware-generated timer
+ interrupt from a software-generated timer interrupt.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The soft timer interrupt was generated.
+ @retval EFI_UNSUPPORTEDT The platform does not support the generation of soft
+ timer interrupts.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGenerateSoftInterrupt (
+ IN EFI_TIMER_ARCH_PROTOCOL *This
+ );
+
+///
+/// The handle onto which the Timer Architectural Protocol will be installed.
+///
+EFI_HANDLE mTimerHandle = NULL;
+
+///
+/// The Timer Architectural Protocol that this driver produces.
+///
+EFI_TIMER_ARCH_PROTOCOL mTimer = {
+ TimerDriverRegisterHandler,
+ TimerDriverSetTimerPeriod,
+ TimerDriverGetTimerPeriod,
+ TimerDriverGenerateSoftInterrupt
+};
+
+///
+/// Pointer to the CPU Architectural Protocol instance.
+///
+EFI_CPU_ARCH_PROTOCOL *mCpu = NULL;
+
+///
+/// The notification function to call on every timer interrupt.
+///
+EFI_TIMER_NOTIFY mTimerNotifyFunction = NULL;
+
+///
+/// The current period of the HPET timer interrupt in 100 ns units.
+///
+UINT64 mTimerPeriod = 0;
+
+///
+/// The number of HPET timer ticks required for the current HPET rate specified by mTimerPeriod.
+///
+UINT64 mTimerCount;
+
+///
+/// Mask used for counter and comparator calculations to adjust for a 32-bit or 64-bit counter.
+///
+UINT64 mCounterMask;
+
+///
+/// The HPET main counter value from the most recent HPET timer interrupt.
+///
+volatile UINT64 mPreviousMainCounter;
+
+volatile UINT64 mPreviousComparator;
+
+///
+/// The index of the HPET timer being managed by this driver.
+///
+UINTN mTimerIndex;
+
+///
+/// The I/O APIC IRQ that the HPET Timer is mapped if I/O APIC mode is used.
+///
+UINT32 mTimerIrq;
+
+///
+/// Cached state of the HPET General Capabilities register managed by this driver.
+/// Caching the state reduces the number of times the configuration register is read.
+///
+HPET_GENERAL_CAPABILITIES_ID_REGISTER mHpetGeneralCapabilities;
+
+///
+/// Cached state of the HPET General Configuration register managed by this driver.
+/// Caching the state reduces the number of times the configuration register is read.
+///
+HPET_GENERAL_CONFIGURATION_REGISTER mHpetGeneralConfiguration;
+
+///
+/// Cached state of the Configuration register for the HPET Timer managed by
+/// this driver. Caching the state reduces the number of times the configuration
+/// register is read.
+///
+HPET_TIMER_CONFIGURATION_REGISTER mTimerConfiguration;
+
+///
+/// Counts the number of HPET Timer interrupts processed by this driver.
+/// Only required for debug.
+///
+volatile UINTN mNumTicks;
+
+/**
+ Read a 64-bit register from the HPET
+
+ @param Offset Specifies the offset of the HPET register to read.
+
+ @return The 64-bit value read from the HPET register specified by Offset.
+**/
+UINT64
+HpetRead (
+ IN UINTN Offset
+ )
+{
+ return MmioRead64 (PcdGet32 (PcdHpetBaseAddress) + Offset);
+}
+
+/**
+ Write a 64-bit HPET register.
+
+ @param Offset Specifies the ofsfert of the HPET register to write.
+ @param Value Specifies the value to write to the HPET register specified by Offset.
+
+ @return The 64-bit value written to HPET register specified by Offset.
+**/
+UINT64
+HpetWrite (
+ IN UINTN Offset,
+ IN UINT64 Value
+ )
+{
+ return MmioWrite64 (PcdGet32 (PcdHpetBaseAddress) + Offset, Value);
+}
+
+/**
+ Enable or disable the main counter in the HPET Timer.
+
+ @param Enable If TRUE, then enable the main counter in the HPET Timer.
+ If FALSE, then disable the main counter in the HPET Timer.
+**/
+VOID
+HpetEnable (
+ IN BOOLEAN Enable
+ )
+{
+ mHpetGeneralConfiguration.Bits.MainCounterEnable = Enable ? 1 : 0;
+ HpetWrite (HPET_GENERAL_CONFIGURATION_OFFSET, mHpetGeneralConfiguration.Uint64);
+}
+
+/**
+ The interrupt handler for the HPET timer. This handler clears the HPET interrupt
+ and computes the amount of time that has passed since the last HPET timer interrupt.
+ If a notification function is registered, then the amount of time since the last
+ HPET interrupt is passed to that notification function in 100 ns units. The HPET
+ time is updated to generate another interrupt in the required time period.
+
+ @param InterruptType The type of interrupt that occured.
+ @param SystemContext A pointer to the system context when the interrupt occured.
+**/
+VOID
+EFIAPI
+TimerInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ UINT64 MainCounter;
+ UINT64 Comparator;
+ UINT64 TimerPeriod;
+ UINT64 Delta;
+
+ //
+ // Count number of ticks
+ //
+ DEBUG_CODE (mNumTicks++;);
+
+ //
+ // Clear HPET timer interrupt status
+ //
+ HpetWrite (HPET_GENERAL_INTERRUPT_STATUS_OFFSET, LShiftU64 (1, mTimerIndex));
+
+ //
+ // Local APIC EOI
+ //
+ SendApicEoi ();
+
+ //
+ // Disable HPET timer when adjusting the COMPARATOR value to prevent a missed interrupt
+ //
+ HpetEnable (FALSE);
+
+ //
+ // Capture main counter value
+ //
+ MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
+
+ //
+ // Get the previous comparator counter
+ //
+ mPreviousComparator = HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
+
+ //
+ // Set HPET COMPARATOR to the value required for the next timer tick
+ //
+ Comparator = (mPreviousComparator + mTimerCount) & mCounterMask;
+
+ if ((mPreviousMainCounter < MainCounter) && (mPreviousComparator > Comparator)) {
+ //
+ // When comparator overflows
+ //
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, Comparator);
+ } else if ((mPreviousMainCounter > MainCounter) && (mPreviousComparator < Comparator)) {
+ //
+ // When main counter overflows
+ //
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (MainCounter + mTimerCount) & mCounterMask);
+ } else {
+ //
+ // When both main counter and comparator do not overflow or both do overflow
+ //
+ if (Comparator > MainCounter) {
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, Comparator);
+ } else {
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (MainCounter + mTimerCount) & mCounterMask);
+ }
+ }
+
+ //
+ // Enable the HPET counter once the new COMPARATOR value has been set.
+ //
+ HpetEnable (TRUE);
+
+ //
+ // Check to see if there is a registered notification function
+ //
+ if (mTimerNotifyFunction != NULL) {
+ //
+ // Compute time since last notification in 100 ns units (10 ^ -7)
+ //
+ if (MainCounter > mPreviousMainCounter) {
+ //
+ // Main counter does not overflow
+ //
+ Delta = MainCounter - mPreviousMainCounter;
+ } else {
+ //
+ // Main counter overflows, first usb, then add
+ //
+ Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
+ }
+ TimerPeriod = DivU64x32 (
+ MultU64x32 (
+ Delta & mCounterMask,
+ mHpetGeneralCapabilities.Bits.CounterClockPeriod
+ ),
+ 100000000
+ );
+
+ //
+ // Call registered notification function passing in the time since the last
+ // interrupt in 100 ns units.
+ //
+ mTimerNotifyFunction (TimerPeriod);
+ }
+
+ //
+ // Save main counter value
+ //
+ mPreviousMainCounter = MainCounter;
+}
+
+/**
+ This function registers the handler NotifyFunction so it is called every time
+ the timer interrupt fires. It also passes the amount of time since the last
+ handler call to the NotifyFunction. If NotifyFunction is NULL, then the
+ handler is unregistered. If the handler is registered, then EFI_SUCCESS is
+ returned. If the CPU does not support registering a timer interrupt handler,
+ then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
+ when a handler is already registered, then EFI_ALREADY_STARTED is returned.
+ If an attempt is made to unregister a handler when a handler is not registered,
+ then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
+ register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
+ is returned.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param NotifyFunction The function to call when a timer interrupt fires.
+ This function executes at TPL_HIGH_LEVEL. The DXE
+ Core will register a handler for the timer interrupt,
+ so it can know how much time has passed. This
+ information is used to signal timer based events.
+ NULL will unregister the handler.
+
+ @retval EFI_SUCCESS The timer handler was registered.
+ @retval EFI_UNSUPPORTED The platform does not support timer interrupts.
+ @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
+ registered.
+ @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
+ previously registered.
+ @retval EFI_DEVICE_ERROR The timer handler could not be registered.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverRegisterHandler (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN EFI_TIMER_NOTIFY NotifyFunction
+ )
+{
+ //
+ // Check for invalid parameters
+ //
+ if (NotifyFunction == NULL && mTimerNotifyFunction == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (NotifyFunction != NULL && mTimerNotifyFunction != NULL) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ //
+ // Cache the registered notification function
+ //
+ mTimerNotifyFunction = NotifyFunction;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function adjusts the period of timer interrupts to the value specified
+ by TimerPeriod. If the timer period is updated, then the selected timer
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
+ If an error occurs while attempting to update the timer period, then the
+ timer hardware will be put back in its state prior to this call, and
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
+ is disabled. This is not the same as disabling the CPU's interrupts.
+ Instead, it must either turn off the timer hardware, or it must adjust the
+ interrupt controller so that a CPU interrupt is not generated when the timer
+ interrupt fires.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod The rate to program the timer interrupt in 100 nS units.
+ If the timer hardware is not programmable, then
+ EFI_UNSUPPORTED is returned. If the timer is programmable,
+ then the timer period will be rounded up to the nearest
+ timer period that is supported by the timer hardware.
+ If TimerPeriod is set to 0, then the timer interrupts
+ will be disabled.
+
+ @retval EFI_SUCCESS The timer period was changed.
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverSetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN UINT64 TimerPeriod
+ )
+{
+ UINT64 MainCounter;
+ UINT64 Delta;
+ UINT64 CurrentComparator;
+ HPET_TIMER_MSI_ROUTE_REGISTER HpetTimerMsiRoute;
+
+ //
+ // Disable HPET timer when adjusting the timer period
+ //
+ HpetEnable (FALSE);
+
+ if (TimerPeriod == 0) {
+ if (mTimerPeriod != 0) {
+ //
+ // Check if there is possibly a pending interrupt
+ //
+ MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
+ if (MainCounter < mPreviousMainCounter) {
+ Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
+ } else {
+ Delta = MainCounter - mPreviousMainCounter;
+ }
+ if ((Delta & mCounterMask) >= mTimerCount) {
+ //
+ // Interrupt still happens after disable HPET, wait to be processed
+ // Wait until interrupt is processed and comparator is increased
+ //
+ CurrentComparator = HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
+ while (CurrentComparator == mPreviousComparator) {
+ CurrentComparator = HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
+ CpuPause();
+ }
+ }
+ }
+
+ //
+ // If TimerPeriod is 0, then mask HPET Timer interrupts
+ //
+
+ if (mTimerConfiguration.Bits.MsiInterruptCapablity != 0 && FeaturePcdGet (PcdHpetMsiEnable)) {
+ //
+ // Disable HPET MSI interrupt generation
+ //
+ mTimerConfiguration.Bits.MsiInterruptEnable = 0;
+ } else {
+ //
+ // Disable I/O APIC Interrupt
+ //
+ IoApicEnableInterrupt (mTimerIrq, FALSE);
+ }
+
+ //
+ // Disable HPET timer interrupt
+ //
+ mTimerConfiguration.Bits.InterruptEnable = 0;
+ HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
+ } else {
+ //
+ // Convert TimerPeriod to femtoseconds and divide by the number if femtoseconds
+ // per tick of the HPET counter to determine the number of HPET counter ticks
+ // in TimerPeriod 100 ns units.
+ //
+ mTimerCount = DivU64x32 (
+ MultU64x32 (TimerPeriod, 100000000),
+ mHpetGeneralCapabilities.Bits.CounterClockPeriod
+ );
+
+ //
+ // Program the HPET Comparator with the number of ticks till the next interrupt
+ //
+ MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
+ if (MainCounter > mPreviousMainCounter) {
+ Delta = MainCounter - mPreviousMainCounter;
+ } else {
+ Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
+ }
+ if ((Delta & mCounterMask) >= mTimerCount) {
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (MainCounter + 1) & mCounterMask);
+ } else {
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (mPreviousMainCounter + mTimerCount) & mCounterMask);
+ }
+
+ //
+ // Enable HPET Timer interrupt generation
+ //
+ if (mTimerConfiguration.Bits.MsiInterruptCapablity != 0 && FeaturePcdGet (PcdHpetMsiEnable)) {
+ //
+ // Program MSI Address and MSI Data values in the selected HPET Timer
+ // Program HPET register with APIC ID of current BSP in case BSP has been switched
+ //
+ HpetTimerMsiRoute.Bits.Address = GetApicMsiAddress ();
+ HpetTimerMsiRoute.Bits.Value = (UINT32)GetApicMsiValue (PcdGet8 (PcdHpetLocalApicVector), LOCAL_APIC_DELIVERY_MODE_LOWEST_PRIORITY, FALSE, FALSE);
+ HpetWrite (HPET_TIMER_MSI_ROUTE_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, HpetTimerMsiRoute.Uint64);
+ //
+ // Enable HPET MSI Interrupt
+ //
+ mTimerConfiguration.Bits.MsiInterruptEnable = 1;
+ } else {
+ //
+ // Enable timer interrupt through I/O APIC
+ // Program IOAPIC register with APIC ID of current BSP in case BSP has been switched
+ //
+ IoApicConfigureInterrupt (mTimerIrq, PcdGet8 (PcdHpetLocalApicVector), IO_APIC_DELIVERY_MODE_LOWEST_PRIORITY, TRUE, FALSE);
+ IoApicEnableInterrupt (mTimerIrq, TRUE);
+ }
+
+ //
+ // Enable HPET Interrupt Generation
+ //
+ mTimerConfiguration.Bits.InterruptEnable = 1;
+ HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
+ }
+
+ //
+ // Save the new timer period
+ //
+ mTimerPeriod = TimerPeriod;
+
+ //
+ // Enable the HPET counter once new timer period has been established
+ // The HPET counter should run even if the HPET Timer interrupts are
+ // disabled. This is used to account for time passed while the interrupt
+ // is disabled.
+ //
+ HpetEnable (TRUE);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function retrieves the period of timer interrupts in 100 ns units,
+ returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
+ is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
+ returned, then the timer is currently disabled.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units.
+ If 0 is returned, then the timer is currently disabled.
+
+ @retval EFI_SUCCESS The timer period was returned in TimerPeriod.
+ @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ OUT UINT64 *TimerPeriod
+ )
+{
+ if (TimerPeriod == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *TimerPeriod = mTimerPeriod;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function generates a soft timer interrupt. If the platform does not support soft
+ timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
+ If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
+ service, then a soft timer interrupt will be generated. If the timer interrupt is
+ enabled when this service is called, then the registered handler will be invoked. The
+ registered handler should not be able to distinguish a hardware-generated timer
+ interrupt from a software-generated timer interrupt.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The soft timer interrupt was generated.
+ @retval EFI_UNSUPPORTEDT The platform does not support the generation of soft
+ timer interrupts.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGenerateSoftInterrupt (
+ IN EFI_TIMER_ARCH_PROTOCOL *This
+ )
+{
+ UINT64 MainCounter;
+ EFI_TPL Tpl;
+ UINT64 TimerPeriod;
+ UINT64 Delta;
+
+ //
+ // Disable interrupts
+ //
+ Tpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
+
+ //
+ // Capture main counter value
+ //
+ MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
+
+ //
+ // Check to see if there is a registered notification function
+ //
+ if (mTimerNotifyFunction != NULL) {
+ //
+ // Compute time since last interrupt in 100 ns units (10 ^ -7)
+ //
+ if (MainCounter > mPreviousMainCounter) {
+ //
+ // Main counter does not overflow
+ //
+ Delta = MainCounter - mPreviousMainCounter;
+ } else {
+ //
+ // Main counter overflows, first usb, then add
+ //
+ Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
+ }
+
+ TimerPeriod = DivU64x32 (
+ MultU64x32 (
+ Delta & mCounterMask,
+ mHpetGeneralCapabilities.Bits.CounterClockPeriod
+ ),
+ 100000000
+ );
+
+ //
+ // Call registered notification function passing in the time since the last
+ // interrupt in 100 ns units.
+ //
+ mTimerNotifyFunction (TimerPeriod);
+ }
+
+ //
+ // Save main counter value
+ //
+ mPreviousMainCounter = MainCounter;
+
+ //
+ // Restore interrupts
+ //
+ gBS->RestoreTPL (Tpl);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize the Timer Architectural Protocol driver
+
+ @param ImageHandle ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Timer Architectural Protocol created
+ @retval EFI_OUT_OF_RESOURCES Not enough resources available to initialize driver.
+ @retval EFI_DEVICE_ERROR A device error occured attempting to initialize the driver.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ UINTN TimerIndex;
+ UINTN MsiTimerIndex;
+ HPET_TIMER_MSI_ROUTE_REGISTER HpetTimerMsiRoute;
+
+ DEBUG ((DEBUG_INFO, "Init HPET Timer Driver\n"));
+
+ //
+ // Make sure the Timer Architectural Protocol is not already installed in the system
+ //
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiTimerArchProtocolGuid);
+
+ //
+ // Find the CPU architectural protocol.
+ //
+ Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **) &mCpu);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Retrieve HPET Capabilities and Configuration Information
+ //
+ mHpetGeneralCapabilities.Uint64 = HpetRead (HPET_GENERAL_CAPABILITIES_ID_OFFSET);
+ mHpetGeneralConfiguration.Uint64 = HpetRead (HPET_GENERAL_CONFIGURATION_OFFSET);
+
+ //
+ // If Revision is not valid, then ASSERT() and unload the driver because the HPET
+ // device is not present.
+ //
+ ASSERT (mHpetGeneralCapabilities.Uint64 != 0);
+ ASSERT (mHpetGeneralCapabilities.Uint64 != 0xFFFFFFFFFFFFFFFFULL);
+ if (mHpetGeneralCapabilities.Uint64 == 0 || mHpetGeneralCapabilities.Uint64 == 0xFFFFFFFFFFFFFFFFULL) {
+ DEBUG ((DEBUG_ERROR, "HPET device is not present. Unload HPET driver.\n"));
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Force the HPET timer to be disabled while setting everything up
+ //
+ HpetEnable (FALSE);
+
+ //
+ // Dump HPET Configuration Information
+ //
+ DEBUG_CODE (
+ DEBUG ((DEBUG_INFO, "HPET Base Address = 0x%08x\n", PcdGet32 (PcdHpetBaseAddress)));
+ DEBUG ((DEBUG_INFO, " HPET_GENERAL_CAPABILITIES_ID = 0x%016lx\n", mHpetGeneralCapabilities));
+ DEBUG ((DEBUG_INFO, " HPET_GENERAL_CONFIGURATION = 0x%016lx\n", mHpetGeneralConfiguration.Uint64));
+ DEBUG ((DEBUG_INFO, " HPET_GENERAL_INTERRUPT_STATUS = 0x%016lx\n", HpetRead (HPET_GENERAL_INTERRUPT_STATUS_OFFSET)));
+ DEBUG ((DEBUG_INFO, " HPET_MAIN_COUNTER = 0x%016lx\n", HpetRead (HPET_MAIN_COUNTER_OFFSET)));
+ DEBUG ((DEBUG_INFO, " HPET Main Counter Period = %d (fs)\n", mHpetGeneralCapabilities.Bits.CounterClockPeriod));
+ for (TimerIndex = 0; TimerIndex <= mHpetGeneralCapabilities.Bits.NumberOfTimers; TimerIndex++) {
+ DEBUG ((DEBUG_INFO, " HPET_TIMER%d_CONFIGURATION = 0x%016lx\n", TimerIndex, HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, " HPET_TIMER%d_COMPARATOR = 0x%016lx\n", TimerIndex, HpetRead (HPET_TIMER_COMPARATOR_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, " HPET_TIMER%d_MSI_ROUTE = 0x%016lx\n", TimerIndex, HpetRead (HPET_TIMER_MSI_ROUTE_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
+ }
+ );
+
+ //
+ // Capture the current HPET main counter value.
+ //
+ mPreviousMainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
+
+ //
+ // Determine the interrupt mode to use for the HPET Timer.
+ // Look for MSI first, then unused PIC mode interrupt, then I/O APIC mode interrupt
+ //
+ MsiTimerIndex = HPET_INVALID_TIMER_INDEX;
+ mTimerIndex = HPET_INVALID_TIMER_INDEX;
+ for (TimerIndex = 0; TimerIndex <= mHpetGeneralCapabilities.Bits.NumberOfTimers; TimerIndex++) {
+ //
+ // Read the HPET Timer Capabilities and Configuration register
+ //
+ mTimerConfiguration.Uint64 = HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + TimerIndex * HPET_TIMER_STRIDE);
+
+ //
+ // Check to see if this HPET Timer supports MSI
+ //
+ if (mTimerConfiguration.Bits.MsiInterruptCapablity != 0) {
+ //
+ // Save the index of the first HPET Timer that supports MSI interrupts
+ //
+ if (MsiTimerIndex == HPET_INVALID_TIMER_INDEX) {
+ MsiTimerIndex = TimerIndex;
+ }
+ }
+
+ //
+ // Check to see if this HPET Timer supports I/O APIC interrupts
+ //
+ if (mTimerConfiguration.Bits.InterruptRouteCapability != 0) {
+ //
+ // Save the index of the first HPET Timer that supports I/O APIC interrupts
+ //
+ if (mTimerIndex == HPET_INVALID_TIMER_INDEX) {
+ mTimerIndex = TimerIndex;
+ mTimerIrq = (UINT32)LowBitSet32 (mTimerConfiguration.Bits.InterruptRouteCapability);
+ }
+ }
+ }
+
+ if (FeaturePcdGet (PcdHpetMsiEnable) && MsiTimerIndex != HPET_INVALID_TIMER_INDEX) {
+ //
+ // Use MSI interrupt if supported
+ //
+ mTimerIndex = MsiTimerIndex;
+
+ //
+ // Program MSI Address and MSI Data values in the selected HPET Timer
+ //
+ HpetTimerMsiRoute.Bits.Address = GetApicMsiAddress ();
+ HpetTimerMsiRoute.Bits.Value = (UINT32)GetApicMsiValue (PcdGet8 (PcdHpetLocalApicVector), LOCAL_APIC_DELIVERY_MODE_LOWEST_PRIORITY, FALSE, FALSE);
+ HpetWrite (HPET_TIMER_MSI_ROUTE_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, HpetTimerMsiRoute.Uint64);
+
+ //
+ // Read the HPET Timer Capabilities and Configuration register and initialize for MSI mode
+ // Clear LevelTriggeredInterrupt to use edge triggered interrupts when in MSI mode
+ //
+ mTimerConfiguration.Uint64 = HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
+ mTimerConfiguration.Bits.LevelTriggeredInterrupt = 0;
+ } else {
+ //
+ // If no HPET timers support MSI or I/O APIC modes, then ASSERT() and unload the driver.
+ //
+ ASSERT (mTimerIndex != HPET_INVALID_TIMER_INDEX);
+ if (mTimerIndex == HPET_INVALID_TIMER_INDEX) {
+ DEBUG ((DEBUG_ERROR, "No HPET timers support MSI or I/O APIC mode. Unload HPET driver.\n"));
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Initialize I/O APIC entry for HPET Timer Interrupt
+ // Fixed Delivery Mode, Level Triggered, Asserted Low
+ //
+ IoApicConfigureInterrupt (mTimerIrq, PcdGet8 (PcdHpetLocalApicVector), IO_APIC_DELIVERY_MODE_LOWEST_PRIORITY, TRUE, FALSE);
+
+ //
+ // Read the HPET Timer Capabilities and Configuration register and initialize for I/O APIC mode
+ // Clear MsiInterruptCapability to force rest of driver to use I/O APIC mode
+ // Set LevelTriggeredInterrupt to use level triggered interrupts when in I/O APIC mode
+ // Set InterruptRoute field based in mTimerIrq
+ //
+ mTimerConfiguration.Uint64 = HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
+ mTimerConfiguration.Bits.LevelTriggeredInterrupt = 1;
+ mTimerConfiguration.Bits.InterruptRoute = mTimerIrq;
+ }
+
+ //
+ // Configure the selected HPET Timer with settings common to both MSI mode and I/O APIC mode
+ // Clear InterruptEnable to keep interrupts disabled until full init is complete
+ // Clear PeriodicInterruptEnable to use one-shot mode
+ // Configure as a 32-bit counter
+ //
+ mTimerConfiguration.Bits.InterruptEnable = 0;
+ mTimerConfiguration.Bits.PeriodicInterruptEnable = 0;
+ mTimerConfiguration.Bits.CounterSizeEnable = 1;
+ HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
+
+ //
+ // Read the HPET Timer Capabilities and Configuration register back again.
+ // CounterSizeEnable will be read back as a 0 if it is a 32-bit only timer
+ //
+ mTimerConfiguration.Uint64 = HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
+ if ((mTimerConfiguration.Bits.CounterSizeEnable == 1) && (sizeof (UINTN) == sizeof (UINT64))) {
+ DEBUG ((DEBUG_INFO, "Choose 64-bit HPET timer.\n"));
+ //
+ // 64-bit BIOS can use 64-bit HPET timer
+ //
+ mCounterMask = 0xffffffffffffffffULL;
+ //
+ // Set timer back to 64-bit
+ //
+ mTimerConfiguration.Bits.CounterSizeEnable = 0;
+ HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
+ } else {
+ DEBUG ((DEBUG_INFO, "Choose 32-bit HPET timer.\n"));
+ mCounterMask = 0x00000000ffffffffULL;
+ }
+
+ //
+ // Install interrupt handler for selected HPET Timer
+ //
+ Status = mCpu->RegisterInterruptHandler (mCpu, PcdGet8 (PcdHpetLocalApicVector), TimerInterruptHandler);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Unable to register HPET interrupt with CPU Arch Protocol. Unload HPET driver.\n"));
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Force the HPET Timer to be enabled at its default period
+ //
+ Status = TimerDriverSetTimerPeriod (&mTimer, PcdGet64 (PcdHpetDefaultTimerPeriod));
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Unable to set HPET default timer rate. Unload HPET driver.\n"));
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Show state of enabled HPET timer
+ //
+ DEBUG_CODE (
+ if (mTimerConfiguration.Bits.MsiInterruptCapablity != 0 && FeaturePcdGet (PcdHpetMsiEnable)) {
+ DEBUG ((DEBUG_INFO, "HPET Interrupt Mode MSI\n"));
+ } else {
+ DEBUG ((DEBUG_INFO, "HPET Interrupt Mode I/O APIC\n"));
+ DEBUG ((DEBUG_INFO, "HPET I/O APIC IRQ = 0x%02x\n", mTimerIrq));
+ }
+ DEBUG ((DEBUG_INFO, "HPET Interrupt Vector = 0x%02x\n", PcdGet8 (PcdHpetLocalApicVector)));
+ DEBUG ((DEBUG_INFO, "HPET Counter Mask = 0x%016lx\n", mCounterMask));
+ DEBUG ((DEBUG_INFO, "HPET Timer Period = %d\n", mTimerPeriod));
+ DEBUG ((DEBUG_INFO, "HPET Timer Count = 0x%016lx\n", mTimerCount));
+ DEBUG ((DEBUG_INFO, "HPET_TIMER%d_CONFIGURATION = 0x%016lx\n", mTimerIndex, HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, "HPET_TIMER%d_COMPARATOR = 0x%016lx\n", mTimerIndex, HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, "HPET_TIMER%d_MSI_ROUTE = 0x%016lx\n", mTimerIndex, HpetRead (HPET_TIMER_MSI_ROUTE_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
+
+ //
+ // Wait for a few timer interrupts to fire before continuing
+ //
+ while (mNumTicks < 10);
+ );
+
+ //
+ // Install the Timer Architectural Protocol onto a new handle
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mTimerHandle,
+ &gEfiTimerArchProtocolGuid, &mTimer,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}