hikey: Add a HIDL HAL for Bluetooth

The hikey HCI tty driver needs FIONREAD to be called before every read.

Add an HciPacketizerHikey class to make sure that FIONREAD is called.

Test: Bluetooth starts/stops, VtsHalBluetoothV1_0TargetTest passes
Change-Id: I9e9260337108c93cae66b89e21c3561916f42f54
diff --git a/bluetooth/hci_packetizer_hikey.cc b/bluetooth/hci_packetizer_hikey.cc
new file mode 100644
index 0000000..9b54b8e
--- /dev/null
+++ b/bluetooth/hci_packetizer_hikey.cc
@@ -0,0 +1,121 @@
+//
+// Copyright 2017 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+#include "hci_packetizer_hikey.h"
+
+#include <sys/ioctl.h>
+#include <utils/Log.h>
+
+#include <android-base/logging.h>
+
+namespace {
+
+const size_t preamble_size_for_type[] = {
+    0, HCI_COMMAND_PREAMBLE_SIZE, HCI_ACL_PREAMBLE_SIZE, HCI_SCO_PREAMBLE_SIZE,
+    HCI_EVENT_PREAMBLE_SIZE};
+const size_t packet_length_offset_for_type[] = {
+    0, HCI_LENGTH_OFFSET_CMD, HCI_LENGTH_OFFSET_ACL, HCI_LENGTH_OFFSET_SCO,
+    HCI_LENGTH_OFFSET_EVT};
+
+size_t HciGetPacketLengthForType(HciPacketType type, const uint8_t* preamble) {
+  size_t offset = packet_length_offset_for_type[type];
+  if (type != HCI_PACKET_TYPE_ACL_DATA) return preamble[offset];
+  return (((preamble[offset + 1]) << 8) | preamble[offset]);
+}
+
+}  // namespace
+
+namespace android {
+namespace hardware {
+namespace bluetooth {
+namespace V1_0 {
+namespace hikey {
+
+void HciPacketizerHikey::OnDataReadyHikey(int fd) {
+  int tty_bytes = 0;
+  if (ioctl(fd, FIONREAD, &tty_bytes) == -1)
+    ALOGE("%s:FIONREAD %s", __func__, strerror(errno));
+  ALOGV("%s:tty_bytes = %d", __func__, tty_bytes);
+  uint8_t* tmp_buffer = new uint8_t[tty_bytes];
+  size_t bytes_read = TEMP_FAILURE_RETRY(read(fd, tmp_buffer, tty_bytes));
+  CHECK(static_cast<int>(bytes_read) == tty_bytes);
+
+  size_t index = 0;
+  while (index < bytes_read - 1) {
+    switch (hci_parser_state_) {
+      case HCI_IDLE: {
+        hci_packet_type_ = static_cast<HciPacketType>(tmp_buffer[index++]);
+        CHECK(hci_packet_type_ >= HCI_PACKET_TYPE_ACL_DATA &&
+              hci_packet_type_ <= HCI_PACKET_TYPE_EVENT)
+            << "hci_packet_type_ = "
+            << static_cast<unsigned int>(hci_packet_type_);
+        hci_parser_state_ = HCI_TYPE_READY;
+        hci_packet_bytes_remaining_ = preamble_size_for_type[hci_packet_type_];
+        hci_packet_bytes_read_ = 0;
+        break;
+      }
+
+      case HCI_TYPE_READY: {
+        size_t bytes_to_copy = (bytes_read - index < hci_packet_bytes_remaining_
+                                    ? bytes_read - index
+                                    : hci_packet_bytes_remaining_);
+        memcpy(hci_packet_preamble_ + hci_packet_bytes_read_,
+               &tmp_buffer[index], bytes_to_copy);
+        hci_packet_bytes_remaining_ -= bytes_to_copy;
+        hci_packet_bytes_read_ += bytes_to_copy;
+        index += bytes_to_copy;
+        ALOGV("%s:TYPE index = %d", __func__, static_cast<int>(index));
+        if (hci_packet_bytes_remaining_ == 0) {
+          size_t packet_length =
+              HciGetPacketLengthForType(hci_packet_type_, hci_packet_preamble_);
+          hci_packet_.resize(preamble_size_for_type[hci_packet_type_] +
+                             packet_length);
+          memcpy(hci_packet_.data(), hci_packet_preamble_,
+                 preamble_size_for_type[hci_packet_type_]);
+          hci_packet_bytes_remaining_ = packet_length;
+          hci_parser_state_ = HCI_PAYLOAD;
+          hci_packet_bytes_read_ = 0;
+        }
+        break;
+      }
+
+      case HCI_PAYLOAD: {
+        size_t bytes_to_copy = (bytes_read - index < hci_packet_bytes_remaining_
+                                    ? bytes_read - index
+                                    : hci_packet_bytes_remaining_);
+        memcpy(hci_packet_.data() + preamble_size_for_type[hci_packet_type_] +
+                   hci_packet_bytes_read_,
+               &tmp_buffer[index], bytes_to_copy);
+        hci_packet_bytes_remaining_ -= bytes_to_copy;
+        hci_packet_bytes_read_ += bytes_to_copy;
+        index += bytes_to_copy;
+        ALOGV("%s:PAYLOAD index = %d", __func__, static_cast<int>(index));
+        if (hci_packet_bytes_remaining_ == 0) {
+          hci_packet_ready_cb_();
+          hci_parser_state_ = HCI_IDLE;
+        }
+        break;
+      }
+    }
+  }
+  delete[] tmp_buffer;
+}
+
+}  // namespace hikey
+}  // namespace V1_0
+}  // namespace bluetooth
+}  // namespace hardware
+}  // namespace android