Add audio policy configuration for the Bluetooth Audio HAL on hikey am: 8b8c39c175 am: 94abe66789
am: b9da19ea4c
Change-Id: Idc659db5b55e9a58123cb7dd109b07a252f6627c
diff --git a/audio/audio_policy_configuration.xml b/audio/audio_policy_configuration.xml
index 7bbcb34..114db1a 100644
--- a/audio/audio_policy_configuration.xml
+++ b/audio/audio_policy_configuration.xml
@@ -83,8 +83,8 @@
</module>
- <!-- A2dp Audio HAL -->
- <xi:include href="a2dp_audio_policy_configuration.xml"/>
+ <!-- A2dp Input Audio HAL -->
+ <xi:include href="a2dp_in_audio_policy_configuration.xml"/>
<!-- Usb Audio HAL -->
<xi:include href="usb_audio_policy_configuration.xml"/>
@@ -92,6 +92,9 @@
<!-- Remote Submix Audio HAL -->
<xi:include href="r_submix_audio_policy_configuration.xml"/>
+ <!-- Bluetooth Audio HAL -->
+ <xi:include href="bluetooth_audio_policy_configuration.xml"/>
+
</modules>
<!-- End of Modules section -->
diff --git a/audio/audio_policy_configuration_bluetooth_legacy_hal.xml b/audio/audio_policy_configuration_bluetooth_legacy_hal.xml
new file mode 100644
index 0000000..7bbcb34
--- /dev/null
+++ b/audio/audio_policy_configuration_bluetooth_legacy_hal.xml
@@ -0,0 +1,105 @@
+<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
+
+ <globalConfiguration speaker_drc_enabled="false"/>
+
+ <modules>
+ <!-- Primary Audio HAL -->
+ <module name="primary" halVersion="2.0">
+ <attachedDevices>
+ <item>Speaker</item>
+ <item>Built-In Mic</item>
+ </attachedDevices>
+ <defaultOutputDevice>Speaker</defaultOutputDevice>
+ <mixPorts>
+ <mixPort name="primary output" role="source" flags="AUDIO_OUTPUT_FLAG_PRIMARY">
+ <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
+ samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
+ </mixPort>
+ <mixPort name="primary input" role="sink">
+ <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
+ samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+ channelMasks="AUDIO_CHANNEL_IN_MONO"/>
+ </mixPort>
+ </mixPorts>
+ <devicePorts>
+ <!-- Output devices declaration, i.e. Sink DEVICE PORT -->
+ <devicePort tagName="Speaker" role="sink" type="AUDIO_DEVICE_OUT_SPEAKER">
+ </devicePort>
+ <devicePort tagName="Wired Headset" type="AUDIO_DEVICE_OUT_WIRED_HEADSET" role="sink">
+ </devicePort>
+ <devicePort tagName="Wired Headphones" type="AUDIO_DEVICE_OUT_WIRED_HEADPHONE" role="sink">
+ </devicePort>
+ <devicePort tagName="BT SCO" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO" role="sink">
+ </devicePort>
+ <devicePort tagName="BT SCO Headset" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET" role="sink">
+ </devicePort>
+ <devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
+ </devicePort>
+ <devicePort tagName="Aux Digital" type="AUDIO_DEVICE_OUT_AUX_DIGITAL" role="sink">
+ </devicePort>
+
+ <devicePort tagName="Built-In Mic" type="AUDIO_DEVICE_IN_BUILTIN_MIC" role="source">
+ </devicePort>
+ <devicePort tagName="Wired Headset Mic" type="AUDIO_DEVICE_IN_WIRED_HEADSET" role="source">
+ </devicePort>
+ <devicePort tagName="BT SCO Headset Mic" type="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET" role="source">
+ </devicePort>
+ </devicePorts>
+ <!-- route declaration, i.e. list all available sources for a given sink -->
+ <routes>
+ <route type="mix" sink="Speaker"
+ sources="primary output"/>
+ <route type="mix" sink="Wired Headset"
+ sources="primary output"/>
+ <route type="mix" sink="Wired Headphones"
+ sources="primary output"/>
+ <route type="mix" sink="Aux Digital"
+ sources="primary output"/>
+ <route type="mix" sink="BT SCO"
+ sources="primary output"/>
+ <route type="mix" sink="BT SCO Headset"
+ sources="primary output"/>
+ <route type="mix" sink="BT SCO Car Kit"
+ sources="primary output"/>
+ <route type="mix" sink="primary input"
+ sources="Built-In Mic,Wired Headset Mic,BT SCO Headset Mic"/>
+ </routes>
+
+ </module>
+
+ <!-- A2dp Audio HAL -->
+ <xi:include href="a2dp_audio_policy_configuration.xml"/>
+
+ <!-- Usb Audio HAL -->
+ <xi:include href="usb_audio_policy_configuration.xml"/>
+
+ <!-- Remote Submix Audio HAL -->
+ <xi:include href="r_submix_audio_policy_configuration.xml"/>
+
+ </modules>
+ <!-- End of Modules section -->
+
+ <!-- Volume section -->
+
+ <xi:include href="audio_policy_volumes.xml"/>
+ <xi:include href="default_volume_tables.xml"/>
+
+ <!-- End of Volume section -->
+
+</audioPolicyConfiguration>
diff --git a/device-common.mk b/device-common.mk
index bd46cb0..3ab61c8 100644
--- a/device-common.mk
+++ b/device-common.mk
@@ -71,6 +71,7 @@
# Build default bluetooth a2dp and usb audio HALs
PRODUCT_PACKAGES += audio.a2dp.default \
+ audio.bluetooth.default \
audio.usb.default \
audio.r_submix.default \
tinyplay
@@ -80,14 +81,14 @@
android.hardware.audio.effect@4.0-impl:32 \
android.hardware.audio@2.0-service \
android.hardware.broadcastradio@1.0-impl \
- android.hardware.soundtrigger@2.0-impl
+ android.hardware.soundtrigger@2.0-impl \
+ android.hardware.bluetooth.audio@2.0-impl
PRODUCT_PACKAGES += vndk_package
PRODUCT_PACKAGES += \
android.hardware.drm@1.0-impl \
- android.hardware.drm@1.0-service \
- android.hardware.bluetooth.audio@2.0-impl
+ android.hardware.drm@1.0-service
PRODUCT_PACKAGES += libGLES_android
@@ -230,7 +231,10 @@
USE_XML_AUDIO_POLICY_CONF := 1
PRODUCT_COPY_FILES += \
device/linaro/hikey/audio/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
+ device/linaro/hikey/audio/audio_policy_configuration_bluetooth_legacy_hal.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration_bluetooth_legacy_hal.xml \
frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/a2dp_in_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_in_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/bluetooth_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_audio_policy_configuration.xml \
frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \
frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \