| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. |
| */ |
| |
| #include "rockchip-u-boot.dtsi" |
| #include <dt-bindings/phy/phy.h> |
| |
| / { |
| dmc { |
| compatible = "rockchip,rk3588-dmc"; |
| bootph-all; |
| status = "okay"; |
| }; |
| |
| usbdrd3_0: usbdrd3_0 { |
| compatible = "rockchip,rk3588-dwc3", "rockchip,rk3399-dwc3"; |
| clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>, |
| <&cru ACLK_USB3OTG0>; |
| clock-names = "ref", "suspend", "bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| |
| usbdrd_dwc3_0: usb@fc000000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0xfc000000 0x0 0x400000>; |
| interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; |
| power-domains = <&power RK3588_PD_USB>; |
| resets = <&cru SRST_A_USB3OTG0>; |
| reset-names = "usb3-otg"; |
| dr_mode = "otg"; |
| phys = <&u2phy0_otg>, <&usbdp_phy0_u3>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| phy_type = "utmi_wide"; |
| snps,dis_enblslpm_quirk; |
| snps,dis-u1-entry-quirk; |
| snps,dis-u2-entry-quirk; |
| snps,dis-u2-freeclk-exists-quirk; |
| snps,dis-del-phy-power-chg-quirk; |
| snps,dis-tx-ipgap-linecheck-quirk; |
| quirk-skip-phy-init; |
| }; |
| }; |
| |
| usb_host0_ehci: usb@fc800000 { |
| compatible = "generic-ehci"; |
| reg = <0x0 0xfc800000 0x0 0x40000>; |
| interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>; |
| clock-names = "usbhost", "arbiter"; |
| power-domains = <&power RK3588_PD_USB>; |
| status = "disabled"; |
| }; |
| |
| usb_host0_ohci: usb@fc840000 { |
| compatible = "generic-ohci"; |
| reg = <0x0 0xfc840000 0x0 0x40000>; |
| interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>; |
| clock-names = "usbhost", "arbiter"; |
| power-domains = <&power RK3588_PD_USB>; |
| status = "disabled"; |
| }; |
| |
| usb_host1_ehci: usb@fc880000 { |
| compatible = "generic-ehci"; |
| reg = <0x0 0xfc880000 0x0 0x40000>; |
| interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>; |
| clock-names = "usbhost", "arbiter"; |
| power-domains = <&power RK3588_PD_USB>; |
| status = "disabled"; |
| }; |
| |
| usb_host1_ohci: usb@fc8c0000 { |
| compatible = "generic-ohci"; |
| reg = <0x0 0xfc8c0000 0x0 0x40000>; |
| interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>; |
| clock-names = "usbhost", "arbiter"; |
| power-domains = <&power RK3588_PD_USB>; |
| status = "disabled"; |
| }; |
| |
| pmu1_grf: syscon@fd58a000 { |
| bootph-all; |
| compatible = "rockchip,rk3588-pmu1-grf", "syscon"; |
| reg = <0x0 0xfd58a000 0x0 0x2000>; |
| }; |
| |
| pipe_phy0_grf: syscon@fd5bc000 { |
| compatible = "rockchip,pipe-phy-grf", "syscon"; |
| reg = <0x0 0xfd5bc000 0x0 0x100>; |
| }; |
| |
| usb2phy0_grf: syscon@fd5d0000 { |
| compatible = "rockchip,rk3588-usb2phy-grf", "syscon", |
| "simple-mfd"; |
| reg = <0x0 0xfd5d0000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| u2phy0: usb2-phy@0 { |
| compatible = "rockchip,rk3588-usb2phy"; |
| reg = <0x0 0x10>; |
| interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>; |
| resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>; |
| reset-names = "phy", "apb"; |
| clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; |
| clock-names = "phyclk"; |
| clock-output-names = "usb480m_phy0"; |
| #clock-cells = <0>; |
| rockchip,usbctrl-grf = <&usb_grf>; |
| status = "disabled"; |
| |
| u2phy0_otg: otg-port { |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| usb2phy2_grf: syscon@fd5d8000 { |
| compatible = "rockchip,rk3588-usb2phy-grf", "syscon", |
| "simple-mfd"; |
| reg = <0x0 0xfd5d8000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| u2phy2: usb2-phy@8000 { |
| compatible = "rockchip,rk3588-usb2phy"; |
| reg = <0x8000 0x10>; |
| interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; |
| clock-names = "phyclk"; |
| #clock-cells = <0>; |
| status = "disabled"; |
| |
| u2phy2_host: host-port { |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| vo0_grf: syscon@fd5a6000 { |
| compatible = "rockchip,rk3588-vo-grf", "syscon"; |
| reg = <0x0 0xfd5a6000 0x0 0x2000>; |
| clocks = <&cru PCLK_VO0GRF>; |
| }; |
| |
| usb_grf: syscon@fd5ac000 { |
| compatible = "rockchip,rk3588-usb-grf", "syscon"; |
| reg = <0x0 0xfd5ac000 0x0 0x4000>; |
| }; |
| |
| usb2phy3_grf: syscon@fd5dc000 { |
| compatible = "rockchip,rk3588-usb2phy-grf", "syscon", |
| "simple-mfd"; |
| reg = <0x0 0xfd5dc000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| u2phy3: usb2-phy@c000 { |
| compatible = "rockchip,rk3588-usb2phy"; |
| reg = <0xc000 0x10>; |
| interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; |
| clock-names = "phyclk"; |
| #clock-cells = <0>; |
| status = "disabled"; |
| |
| u2phy3_host: host-port { |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| usbdpphy0_grf: syscon@fd5c8000 { |
| compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; |
| reg = <0x0 0xfd5c8000 0x0 0x4000>; |
| }; |
| |
| pcie2x1l2: pcie@fe190000 { |
| compatible = "rockchip,rk3588-pcie", "snps,dw-pcie"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| bus-range = <0x40 0x4f>; |
| clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>, |
| <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>, |
| <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>; |
| clock-names = "aclk_mst", "aclk_slv", |
| "aclk_dbi", "pclk", |
| "aux", "pipe"; |
| device_type = "pci"; |
| interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "sys", "pmc", "msg", "legacy", "err"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>, |
| <0 0 0 2 &pcie2x1l2_intc 1>, |
| <0 0 0 3 &pcie2x1l2_intc 2>, |
| <0 0 0 4 &pcie2x1l2_intc 3>; |
| linux,pci-domain = <4>; |
| num-ib-windows = <8>; |
| num-ob-windows = <8>; |
| num-viewport = <4>; |
| max-link-speed = <2>; |
| msi-map = <0x4000 &gic 0x4000 0x1000>; |
| num-lanes = <1>; |
| phys = <&combphy0_ps PHY_TYPE_PCIE>; |
| phy-names = "pcie-phy"; |
| power-domains = <&power RK3588_PD_PCIE>; |
| ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, |
| <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>, |
| <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>; |
| reg = <0xa 0x41000000 0x0 0x00400000>, |
| <0x0 0xfe190000 0x0 0x00010000>, |
| <0x0 0xf4000000 0x0 0x00100000>; |
| reg-names = "dbi", "apb", "config"; |
| resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>; |
| reset-names = "pcie", "periph"; |
| rockchip,pipe-grf = <&php_grf>; |
| status = "disabled"; |
| |
| pcie2x1l2_intc: legacy-interrupt-controller { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>; |
| }; |
| }; |
| |
| sfc: spi@fe2b0000 { |
| compatible = "rockchip,sfc"; |
| reg = <0x0 0xfe2b0000 0x0 0x4000>; |
| interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; |
| clock-names = "clk_sfc", "hclk_sfc"; |
| status = "disabled"; |
| }; |
| |
| rng: rng@fe378000 { |
| compatible = "rockchip,trngv1"; |
| reg = <0x0 0xfe378000 0x0 0x200>; |
| status = "disabled"; |
| }; |
| |
| usbdp_phy0: phy@fed80000 { |
| compatible = "rockchip,rk3588-usbdp-phy"; |
| reg = <0x0 0xfed80000 0x0 0x10000>; |
| rockchip,u2phy-grf = <&usb2phy0_grf>; |
| rockchip,usb-grf = <&usb_grf>; |
| rockchip,usbdpphy-grf = <&usbdpphy0_grf>; |
| rockchip,vo-grf = <&vo0_grf>; |
| clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, |
| <&cru CLK_USBDP_PHY0_IMMORTAL>, |
| <&cru PCLK_USBDPPHY0>, |
| <&u2phy0>; |
| clock-names = "refclk", "immortal", "pclk", "utmi"; |
| resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, |
| <&cru SRST_USBDP_COMBO_PHY0_CMN>, |
| <&cru SRST_USBDP_COMBO_PHY0_LANE>, |
| <&cru SRST_USBDP_COMBO_PHY0_PCS>, |
| <&cru SRST_P_USBDPPHY0>; |
| reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; |
| status = "disabled"; |
| |
| usbdp_phy0_dp: dp-port { |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usbdp_phy0_u3: usb3-port { |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| combphy0_ps: phy@fee00000 { |
| compatible = "rockchip,rk3588-naneng-combphy"; |
| reg = <0x0 0xfee00000 0x0 0x100>; |
| #phy-cells = <1>; |
| clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>, |
| <&cru PCLK_PHP_ROOT>; |
| clock-names = "refclk", "apbclk", "phpclk"; |
| assigned-clocks = <&cru CLK_REF_PIPE_PHY0>; |
| assigned-clock-rates = <100000000>; |
| resets = <&cru SRST_P_PCIE2_PHY0>, <&cru SRST_REF_PIPE_PHY0>; |
| reset-names = "combphy-apb", "combphy"; |
| rockchip,pipe-grf = <&php_grf>; |
| rockchip,pipe-phy-grf = <&pipe_phy0_grf>; |
| status = "disabled"; |
| }; |
| }; |
| |
| &xin24m { |
| bootph-all; |
| status = "okay"; |
| }; |
| |
| &cru { |
| bootph-pre-ram; |
| status = "okay"; |
| }; |
| |
| &sys_grf { |
| bootph-pre-ram; |
| status = "okay"; |
| }; |
| |
| &scmi { |
| bootph-pre-ram; |
| }; |
| |
| &scmi_clk { |
| bootph-pre-ram; |
| }; |
| |
| &sdmmc { |
| bootph-pre-ram; |
| u-boot,spl-fifo-mode; |
| }; |
| |
| &sdhci { |
| bootph-pre-ram; |
| u-boot,spl-fifo-mode; |
| }; |
| |
| &uart2 { |
| clock-frequency = <24000000>; |
| bootph-pre-ram; |
| status = "okay"; |
| }; |
| |
| &ioc { |
| bootph-pre-ram; |
| }; |
| |
| #ifdef CONFIG_ROCKCHIP_SPI_IMAGE |
| &binman { |
| simple-bin-spi { |
| mkimage { |
| args = "-n", CONFIG_SYS_SOC, "-T", "rksd"; |
| offset = <0x8000>; |
| }; |
| }; |
| }; |
| #endif |