Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
drivers/spi/tegra20_sflash.c
include/fdtdec.h
lib/fdtdec.c
diff --git a/MAINTAINERS b/MAINTAINERS
index bb55650..1614b91 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -833,6 +833,10 @@
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
+Matt Porter <mporter@ti.com>
+
+ ti814x_evm ARM ARMV7 (TI814x Soc)
+
Dave Purdy <david.c.purdy@gmail.com>
pogo_e02 ARM926EJS (Kirkwood SoC)
@@ -910,6 +914,10 @@
Bo Shen <voice.shen@atmel.com>
at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
+Rajeshwari Shinde <rajeshwari.s@samsung.com>
+
+ snow ARM ARMV7 (EXYNOS5250 SoC)
+
Michal Simek <monstr@monstr.eu>
zynq ARM ARMV7 (Zynq SoC)
diff --git a/Makefile b/Makefile
index 12763ce..d60a14b 100644
--- a/Makefile
+++ b/Makefile
@@ -331,7 +331,7 @@
LIBS-y += post/libpost.o
LIBS-y += test/libtest.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
diff --git a/README b/README
index 7f2506a..a35ef31 100644
--- a/README
+++ b/README
@@ -485,6 +485,7 @@
Thumb2 this flag will result in Thumb2 code generated by
GCC.
+ CONFIG_ARM_ERRATA_716044
CONFIG_ARM_ERRATA_742230
CONFIG_ARM_ERRATA_743622
CONFIG_ARM_ERRATA_751472
@@ -3878,6 +3879,10 @@
If defined, the x86 reset vector code is included. This is not
needed when U-Boot is running from Coreboot.
+- CONFIG_SYS_MPUCLK
+ Defines the MPU clock speed (in MHz).
+
+ NOTE : currently only supported on AM335x platforms.
Freescale QE/FMAN Firmware Support:
-----------------------------------
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index a0c89b7..e7839be 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -24,7 +24,7 @@
CROSS_COMPILE ?= arm-linux-
ifndef CONFIG_STANDALONE_LOAD_ADDR
-ifeq ($(SOC),omap3)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
CONFIG_STANDALONE_LOAD_ADDR = 0x80300000
else
CONFIG_STANDALONE_LOAD_ADDR = 0xc100000
diff --git a/arch/arm/cpu/arm1176/bcm2835/Makefile b/arch/arm/cpu/arm1176/bcm2835/Makefile
index 95da6a8..135de42 100644
--- a/arch/arm/cpu/arm1176/bcm2835/Makefile
+++ b/arch/arm/cpu/arm1176/bcm2835/Makefile
@@ -17,7 +17,7 @@
LIB = $(obj)lib$(SOC).o
SOBJS := lowlevel_init.o
-COBJS := init.o reset.o timer.o
+COBJS := init.o reset.o timer.o mbox.o
SRCS := $(SOBJS:.o=.c) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/arm/cpu/arm1176/bcm2835/mbox.c b/arch/arm/cpu/arm1176/bcm2835/mbox.c
new file mode 100644
index 0000000..fd65e33
--- /dev/null
+++ b/arch/arm/cpu/arm1176/bcm2835/mbox.c
@@ -0,0 +1,164 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mbox.h>
+
+#define TIMEOUT (100 * 1000) /* 100mS in uS */
+
+int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv)
+{
+ struct bcm2835_mbox_regs *regs =
+ (struct bcm2835_mbox_regs *)BCM2835_MBOX_PHYSADDR;
+ ulong endtime = get_timer(0) + TIMEOUT;
+ u32 val;
+
+ debug("time: %lu timeout: %lu\n", get_timer(0), endtime);
+
+ if (send & BCM2835_CHAN_MASK) {
+ printf("mbox: Illegal mbox data 0x%08x\n", send);
+ return -1;
+ }
+
+ /* Drain any stale responses */
+
+ for (;;) {
+ val = readl(®s->status);
+ if (val & BCM2835_MBOX_STATUS_RD_EMPTY)
+ break;
+ if (get_timer(0) >= endtime) {
+ printf("mbox: Timeout draining stale responses\n");
+ return -1;
+ }
+ val = readl(®s->read);
+ }
+
+ /* Wait for space to send */
+
+ for (;;) {
+ val = readl(®s->status);
+ if (!(val & BCM2835_MBOX_STATUS_WR_FULL))
+ break;
+ if (get_timer(0) >= endtime) {
+ printf("mbox: Timeout waiting for send space\n");
+ return -1;
+ }
+ }
+
+ /* Send the request */
+
+ val = BCM2835_MBOX_PACK(chan, send);
+ debug("mbox: TX raw: 0x%08x\n", val);
+ writel(val, ®s->write);
+
+ /* Wait for the response */
+
+ for (;;) {
+ val = readl(®s->status);
+ if (!(val & BCM2835_MBOX_STATUS_RD_EMPTY))
+ break;
+ if (get_timer(0) >= endtime) {
+ printf("mbox: Timeout waiting for response\n");
+ return -1;
+ }
+ }
+
+ /* Read the response */
+
+ val = readl(®s->read);
+ debug("mbox: RX raw: 0x%08x\n", val);
+
+ /* Validate the response */
+
+ if (BCM2835_MBOX_UNPACK_CHAN(val) != chan) {
+ printf("mbox: Response channel mismatch\n");
+ return -1;
+ }
+
+ *recv = BCM2835_MBOX_UNPACK_DATA(val);
+
+ return 0;
+}
+
+#ifdef DEBUG
+void dump_buf(struct bcm2835_mbox_hdr *buffer)
+{
+ u32 *p;
+ u32 words;
+ int i;
+
+ p = (u32 *)buffer;
+ words = buffer->buf_size / 4;
+ for (i = 0; i < words; i++)
+ printf(" 0x%04x: 0x%08x\n", i * 4, p[i]);
+}
+#endif
+
+int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer)
+{
+ int ret;
+ u32 rbuffer;
+ struct bcm2835_mbox_tag_hdr *tag;
+ int tag_index;
+
+#ifdef DEBUG
+ printf("mbox: TX buffer\n");
+ dump_buf(buffer);
+#endif
+
+ ret = bcm2835_mbox_call_raw(chan, (u32)buffer, &rbuffer);
+ if (ret)
+ return ret;
+ if (rbuffer != (u32)buffer) {
+ printf("mbox: Response buffer mismatch\n");
+ return -1;
+ }
+
+#ifdef DEBUG
+ printf("mbox: RX buffer\n");
+ dump_buf(buffer);
+#endif
+
+ /* Validate overall response status */
+
+ if (buffer->code != BCM2835_MBOX_RESP_CODE_SUCCESS) {
+ printf("mbox: Header response code invalid\n");
+ return -1;
+ }
+
+ /* Validate each tag's response status */
+
+ tag = (void *)(buffer + 1);
+ tag_index = 0;
+ while (tag->tag) {
+ if (!(tag->val_len & BCM2835_MBOX_TAG_VAL_LEN_RESPONSE)) {
+ printf("mbox: Tag %d missing val_len response bit\n",
+ tag_index);
+ return -1;
+ }
+ /*
+ * Clear the reponse bit so clients can just look right at the
+ * length field without extra processing
+ */
+ tag->val_len &= ~BCM2835_MBOX_TAG_VAL_LEN_RESPONSE;
+ tag = (void *)(((u8 *)tag) + sizeof(*tag) + tag->val_buf_size);
+ tag_index++;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 4668b3c..7a8c2d0 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -32,7 +32,7 @@
COBJS += cpu.o
COBJS += syslib.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),)
SOBJS += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile
index 70c443e..c97e30d 100644
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/cpu/armv7/am33xx/Makefile
@@ -16,7 +16,8 @@
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o
+COBJS-$(CONFIG_AM33XX) += clock_am33xx.o
+COBJS-$(CONFIG_TI814X) += clock_ti814x.o
COBJS += sys_info.o
COBJS += mem.o
COBJS += ddr.o
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index e35a3e3..885fb2d 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -141,11 +141,11 @@
{
#ifdef CONFIG_AM335X_USB0
musb_register(&otg0_plat, &otg0_board_data,
- (void *)AM335X_USB0_OTG_BASE);
+ (void *)USB0_OTG_BASE);
#endif
#ifdef CONFIG_AM335X_USB1
musb_register(&otg1_plat, &otg1_board_data,
- (void *)AM335X_USB1_OTG_BASE);
+ (void *)USB1_OTG_BASE);
#endif
return 0;
}
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
similarity index 91%
rename from arch/arm/cpu/armv7/am33xx/clock.c
rename to arch/arm/cpu/armv7/am33xx/clock_am33xx.c
index d7d98d1..afc0d92 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
@@ -1,9 +1,9 @@
/*
- * clock.c
+ * clock_am33xx.c
*
* clocks for AM33XX based boards
*
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -42,6 +42,35 @@
#define CPGMAC0_IDLE 0x30000
#define DPLL_CLKDCOLDO_GATE_CTRL 0x300
+#define OSC (V_OSCK/1000000)
+
+#define MPUPLL_M CONFIG_SYS_MPUCLK
+#define MPUPLL_N (OSC-1)
+#define MPUPLL_M2 1
+
+/* Core PLL Fdll = 1 GHZ, */
+#define COREPLL_M 1000
+#define COREPLL_N (OSC-1)
+
+#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */
+#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */
+#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */
+
+/*
+ * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll
+ * frequency needs to be set to 960 MHZ. Hence,
+ * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below
+ */
+#define PERPLL_M 960
+#define PERPLL_N (OSC-1)
+#define PERPLL_M2 5
+
+/* DDR Freq is 266 MHZ for now */
+/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
+#define DDRPLL_M 266
+#define DDRPLL_N (OSC-1)
+#define DDRPLL_M2 1
+
const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
new file mode 100644
index 0000000..cb4210f
--- /dev/null
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
@@ -0,0 +1,406 @@
+/*
+ * clock_ti814x.c
+ *
+ * Clocks for TI814X based boards
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+/* PRCM */
+#define PRCM_MOD_EN 0x2
+
+/* CLK_SRC */
+#define OSC_SRC0 0
+#define OSC_SRC1 1
+
+#define L3_OSC_SRC OSC_SRC0
+
+#define OSC_0_FREQ 20
+
+#define DCO_HS2_MIN 500
+#define DCO_HS2_MAX 1000
+#define DCO_HS1_MIN 1000
+#define DCO_HS1_MAX 2000
+
+#define SELFREQDCO_HS2 0x00000801
+#define SELFREQDCO_HS1 0x00001001
+
+#define MPU_N 0x1
+#define MPU_M 0x3C
+#define MPU_M2 1
+#define MPU_CLKCTRL 0x1
+
+#define L3_N 19
+#define L3_M 880
+#define L3_M2 4
+#define L3_CLKCTRL 0x801
+
+#define DDR_N 19
+#define DDR_M 666
+#define DDR_M2 2
+#define DDR_CLKCTRL 0x801
+
+/* ADPLLJ register values */
+#define ADPLLJ_CLKCTRL_HS2 0x00000801 /* HS2 mode, TINT2 = 1 */
+#define ADPLLJ_CLKCTRL_HS1 0x00001001 /* HS1 mode, TINT2 = 1 */
+#define ADPLLJ_CLKCTRL_CLKDCOLDOEN (1 << 29)
+#define ADPLLJ_CLKCTRL_IDLE (1 << 23)
+#define ADPLLJ_CLKCTRL_CLKOUTEN (1 << 20)
+#define ADPLLJ_CLKCTRL_CLKOUTLDOEN (1 << 19)
+#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ (1 << 17)
+#define ADPLLJ_CLKCTRL_LPMODE (1 << 12)
+#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN (1 << 11)
+#define ADPLLJ_CLKCTRL_REGM4XEN (1 << 10)
+#define ADPLLJ_CLKCTRL_TINITZ (1 << 0)
+#define ADPLLJ_CLKCTRL_CLKDCO (ADPLLJ_CLKCTRL_CLKDCOLDOEN | \
+ ADPLLJ_CLKCTRL_CLKOUTEN | \
+ ADPLLJ_CLKCTRL_CLKOUTLDOEN | \
+ ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ)
+
+#define ADPLLJ_STATUS_PHASELOCK (1 << 10)
+#define ADPLLJ_STATUS_FREQLOCK (1 << 9)
+#define ADPLLJ_STATUS_PHSFRQLOCK (ADPLLJ_STATUS_PHASELOCK | \
+ ADPLLJ_STATUS_FREQLOCK)
+#define ADPLLJ_STATUS_BYPASSACK (1 << 8)
+#define ADPLLJ_STATUS_BYPASS (1 << 0)
+#define ADPLLJ_STATUS_BYPASSANDACK (ADPLLJ_STATUS_BYPASSACK | \
+ ADPLLJ_STATUS_BYPASS)
+
+#define ADPLLJ_TENABLE_ENB (1 << 0)
+#define ADPLLJ_TENABLEDIV_ENB (1 << 0)
+
+#define ADPLLJ_M2NDIV_M2SHIFT 16
+
+#define MPU_PLL_BASE (PLL_SUBSYS_BASE + 0x048)
+#define L3_PLL_BASE (PLL_SUBSYS_BASE + 0x110)
+#define DDR_PLL_BASE (PLL_SUBSYS_BASE + 0x290)
+
+struct ad_pll {
+ unsigned int pwrctrl;
+ unsigned int clkctrl;
+ unsigned int tenable;
+ unsigned int tenablediv;
+ unsigned int m2ndiv;
+ unsigned int mn2div;
+ unsigned int fracdiv;
+ unsigned int bwctrl;
+ unsigned int fracctrl;
+ unsigned int status;
+ unsigned int m3div;
+ unsigned int rampctrl;
+};
+
+#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0)
+
+/* PRCM */
+#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500)
+
+struct cm_def {
+ unsigned int resv0[2];
+ unsigned int l3fastclkstctrl;
+ unsigned int resv1[1];
+ unsigned int pciclkstctrl;
+ unsigned int resv2[1];
+ unsigned int ducaticlkstctrl;
+ unsigned int resv3[1];
+ unsigned int emif0clkctrl;
+ unsigned int emif1clkctrl;
+ unsigned int dmmclkctrl;
+ unsigned int fwclkctrl;
+ unsigned int resv4[10];
+ unsigned int usbclkctrl;
+ unsigned int resv5[1];
+ unsigned int sataclkctrl;
+ unsigned int resv6[4];
+ unsigned int ducaticlkctrl;
+ unsigned int pciclkctrl;
+};
+
+#define CM_ALWON_BASE (PRCM_BASE + 0x1400)
+
+struct cm_alwon {
+ unsigned int l3slowclkstctrl;
+ unsigned int ethclkstctrl;
+ unsigned int l3medclkstctrl;
+ unsigned int mmu_clkstctrl;
+ unsigned int mmucfg_clkstctrl;
+ unsigned int ocmc0clkstctrl;
+ unsigned int vcpclkstctrl;
+ unsigned int mpuclkstctrl;
+ unsigned int sysclk4clkstctrl;
+ unsigned int sysclk5clkstctrl;
+ unsigned int sysclk6clkstctrl;
+ unsigned int rtcclkstctrl;
+ unsigned int l3fastclkstctrl;
+ unsigned int resv0[67];
+ unsigned int mcasp0clkctrl;
+ unsigned int mcasp1clkctrl;
+ unsigned int mcasp2clkctrl;
+ unsigned int mcbspclkctrl;
+ unsigned int uart0clkctrl;
+ unsigned int uart1clkctrl;
+ unsigned int uart2clkctrl;
+ unsigned int gpio0clkctrl;
+ unsigned int gpio1clkctrl;
+ unsigned int i2c0clkctrl;
+ unsigned int i2c1clkctrl;
+ unsigned int mcasp345clkctrl;
+ unsigned int atlclkctrl;
+ unsigned int mlbclkctrl;
+ unsigned int pataclkctrl;
+ unsigned int resv1[1];
+ unsigned int uart3clkctrl;
+ unsigned int uart4clkctrl;
+ unsigned int uart5clkctrl;
+ unsigned int wdtimerclkctrl;
+ unsigned int spiclkctrl;
+ unsigned int mailboxclkctrl;
+ unsigned int spinboxclkctrl;
+ unsigned int mmudataclkctrl;
+ unsigned int resv2[2];
+ unsigned int mmucfgclkctrl;
+ unsigned int resv3[2];
+ unsigned int ocmc0clkctrl;
+ unsigned int vcpclkctrl;
+ unsigned int resv4[2];
+ unsigned int controlclkctrl;
+ unsigned int resv5[2];
+ unsigned int gpmcclkctrl;
+ unsigned int ethernet0clkctrl;
+ unsigned int resv6[1];
+ unsigned int mpuclkctrl;
+ unsigned int debugssclkctrl;
+ unsigned int l3clkctrl;
+ unsigned int l4hsclkctrl;
+ unsigned int l4lsclkctrl;
+ unsigned int rtcclkctrl;
+ unsigned int tpccclkctrl;
+ unsigned int tptc0clkctrl;
+ unsigned int tptc1clkctrl;
+ unsigned int tptc2clkctrl;
+ unsigned int tptc3clkctrl;
+ unsigned int resv7[4];
+ unsigned int dcan01clkctrl;
+ unsigned int mmchs0clkctrl;
+ unsigned int mmchs1clkctrl;
+ unsigned int mmchs2clkctrl;
+ unsigned int custefuseclkctrl;
+};
+
+
+const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
+const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
+
+/*
+ * Enable the peripheral clock for required peripherals
+ */
+static void enable_per_clocks(void)
+{
+ /* UART0 */
+ writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
+ while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
+ ;
+
+ /* HSMMC1 */
+ writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl);
+ while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN)
+ ;
+}
+
+/*
+ * select the HS1 or HS2 for DCO Freq
+ * return : CLKCTRL
+ */
+static u32 pll_dco_freq_sel(u32 clkout_dco)
+{
+ if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX)
+ return SELFREQDCO_HS2;
+ else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX)
+ return SELFREQDCO_HS1;
+ else
+ return -1;
+}
+
+/*
+ * select the sigma delta config
+ * return: sigma delta val
+ */
+static u32 pll_sigma_delta_val(u32 clkout_dco)
+{
+ u32 sig_val = 0;
+ float frac_div;
+
+ frac_div = (float) clkout_dco / 250;
+ frac_div = frac_div + 0.90;
+ sig_val = (int)frac_div;
+ sig_val = sig_val << 24;
+
+ return sig_val;
+}
+
+/*
+ * configure individual ADPLLJ
+ */
+static void pll_config(u32 base, u32 n, u32 m, u32 m2,
+ u32 clkctrl_val, int adpllj)
+{
+ const struct ad_pll *adpll = (struct ad_pll *)base;
+ u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0;
+ u32 sig_val = 0, hs_mod = 0;
+
+ m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n;
+ mn2val = m;
+
+ /* calculate clkout_dco */
+ clkout_dco = ((OSC_0_FREQ / (n+1)) * m);
+
+ /* sigma delta & Hs mode selection skip for ADPLLS*/
+ if (adpllj) {
+ sig_val = pll_sigma_delta_val(clkout_dco);
+ hs_mod = pll_dco_freq_sel(clkout_dco);
+ }
+
+ /* by-pass pll */
+ read_clkctrl = readl(&adpll->clkctrl);
+ writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl);
+ while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK)
+ != ADPLLJ_STATUS_BYPASSANDACK)
+ ;
+
+ /* clear TINITZ */
+ read_clkctrl = readl(&adpll->clkctrl);
+ writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
+
+ /*
+ * ref_clk = 20/(n + 1);
+ * clkout_dco = ref_clk * m;
+ * clk_out = clkout_dco/m2;
+ */
+ read_clkctrl = readl(&adpll->clkctrl) &
+ ~(ADPLLJ_CLKCTRL_LPMODE |
+ ADPLLJ_CLKCTRL_DRIFTGUARDIAN |
+ ADPLLJ_CLKCTRL_REGM4XEN);
+ writel(m2nval, &adpll->m2ndiv);
+ writel(mn2val, &adpll->mn2div);
+
+ /* Skip for modena(ADPLLS) */
+ if (adpllj) {
+ writel(sig_val, &adpll->fracdiv);
+ writel((read_clkctrl | hs_mod), &adpll->clkctrl);
+ }
+
+ /* Load M2, N2 dividers of ADPLL */
+ writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
+ writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
+
+ /* Load M, N dividers of ADPLL */
+ writel(ADPLLJ_TENABLE_ENB, &adpll->tenable);
+ writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable);
+
+ /* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */
+ read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO;
+ if (adpllj)
+ writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO),
+ &adpll->clkctrl);
+
+ /* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */
+ read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE;
+ writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
+
+ /* Wait for phase and freq lock */
+ while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) !=
+ ADPLLJ_STATUS_PHSFRQLOCK)
+ ;
+}
+
+static void unlock_pll_control_mmr(void)
+{
+ /* TRM 2.10.1.4 and 3.2.7-3.2.11 */
+ writel(0x1EDA4C3D, 0x481C5040);
+ writel(0x2FF1AC2B, 0x48140060);
+ writel(0xF757FDC0, 0x48140064);
+ writel(0xE2BC3A6D, 0x48140068);
+ writel(0x1EBF131D, 0x4814006c);
+ writel(0x6F361E05, 0x48140070);
+}
+
+static void mpu_pll_config(void)
+{
+ pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0);
+}
+
+static void l3_pll_config(void)
+{
+ u32 l3_osc_src, rd_osc_src = 0;
+
+ l3_osc_src = L3_OSC_SRC;
+ rd_osc_src = readl(OSC_SRC_CTRL);
+
+ if (OSC_SRC0 == l3_osc_src)
+ writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL);
+ else
+ writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL);
+
+ pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1);
+}
+
+void ddr_pll_config(unsigned int ddrpll_m)
+{
+ pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1);
+}
+
+void enable_emif_clocks(void) {};
+
+void enable_dmm_clocks(void)
+{
+ writel(PRCM_MOD_EN, &cmdef->fwclkctrl);
+ writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl);
+ writel(PRCM_MOD_EN, &cmdef->emif0clkctrl);
+ while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN)
+ ;
+ writel(PRCM_MOD_EN, &cmdef->emif1clkctrl);
+ while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN)
+ ;
+ while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300)
+ ;
+ writel(PRCM_MOD_EN, &cmdef->dmmclkctrl);
+ while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN)
+ ;
+ writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl);
+ while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100)
+ ;
+}
+
+/*
+ * Configure the PLL/PRCM for necessary peripherals
+ */
+void pll_init()
+{
+ unlock_pll_control_mmr();
+
+ /* Enable the control module */
+ writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
+
+ mpu_pll_config();
+
+ l3_pll_config();
+
+ /* Enable the required peripherals */
+ enable_per_clocks();
+}
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index 448cc40..d1e2fd3 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -24,15 +24,20 @@
/**
* Base address for EMIF instances
*/
-static struct emif_reg_struct *emif_reg = {
- (struct emif_reg_struct *)EMIF4_0_CFG_BASE};
+static struct emif_reg_struct *emif_reg[2] = {
+ (struct emif_reg_struct *)EMIF4_0_CFG_BASE,
+ (struct emif_reg_struct *)EMIF4_1_CFG_BASE};
/**
- * Base address for DDR instance
+ * Base addresses for DDR PHY cmd/data regs
*/
-static struct ddr_regs *ddr_reg[2] = {
- (struct ddr_regs *)DDR_PHY_BASE_ADDR,
- (struct ddr_regs *)DDR_PHY_BASE_ADDR2};
+static struct ddr_cmd_regs *ddr_cmd_reg[2] = {
+ (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR,
+ (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR2};
+
+static struct ddr_data_regs *ddr_data_reg[2] = {
+ (struct ddr_data_regs *)DDR_PHY_DATA_ADDR,
+ (struct ddr_data_regs *)DDR_PHY_DATA_ADDR2};
/**
* Base address for ddr io control instances
@@ -43,7 +48,7 @@
/**
* Configure SDRAM
*/
-void config_sdram(const struct emif_regs *regs)
+void config_sdram(const struct emif_regs *regs, int nr)
{
if (regs->zq_config) {
/*
@@ -51,68 +56,85 @@
* about 570us for a delay, which will be long enough
* to configure things.
*/
- writel(0x2800, &emif_reg->emif_sdram_ref_ctrl);
- writel(regs->zq_config, &emif_reg->emif_zq_config);
+ writel(0x2800, &emif_reg[nr]->emif_sdram_ref_ctrl);
+ writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
+ writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
+ writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+ writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
}
- writel(regs->sdram_config, &emif_reg->emif_sdram_config);
- writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl);
- writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw);
+ writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+ writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
+ writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
}
/**
* Set SDRAM timings
*/
-void set_sdram_timings(const struct emif_regs *regs)
+void set_sdram_timings(const struct emif_regs *regs, int nr)
{
- writel(regs->sdram_tim1, &emif_reg->emif_sdram_tim_1);
- writel(regs->sdram_tim1, &emif_reg->emif_sdram_tim_1_shdw);
- writel(regs->sdram_tim2, &emif_reg->emif_sdram_tim_2);
- writel(regs->sdram_tim2, &emif_reg->emif_sdram_tim_2_shdw);
- writel(regs->sdram_tim3, &emif_reg->emif_sdram_tim_3);
- writel(regs->sdram_tim3, &emif_reg->emif_sdram_tim_3_shdw);
+ writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1);
+ writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1_shdw);
+ writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2);
+ writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2_shdw);
+ writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3);
+ writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw);
}
/**
* Configure DDR PHY
*/
-void config_ddr_phy(const struct emif_regs *regs)
+void config_ddr_phy(const struct emif_regs *regs, int nr)
{
- writel(regs->emif_ddr_phy_ctlr_1, &emif_reg->emif_ddr_phy_ctrl_1);
- writel(regs->emif_ddr_phy_ctlr_1, &emif_reg->emif_ddr_phy_ctrl_1_shdw);
+ writel(regs->emif_ddr_phy_ctlr_1,
+ &emif_reg[nr]->emif_ddr_phy_ctrl_1);
+ writel(regs->emif_ddr_phy_ctlr_1,
+ &emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw);
}
/**
* Configure DDR CMD control registers
*/
-void config_cmd_ctrl(const struct cmd_control *cmd)
+void config_cmd_ctrl(const struct cmd_control *cmd, int nr)
{
- writel(cmd->cmd0csratio, &ddr_reg[0]->cm0csratio);
- writel(cmd->cmd0dldiff, &ddr_reg[0]->cm0dldiff);
- writel(cmd->cmd0iclkout, &ddr_reg[0]->cm0iclkout);
+ writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio);
+ writel(cmd->cmd0dldiff, &ddr_cmd_reg[nr]->cm0dldiff);
+ writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout);
- writel(cmd->cmd1csratio, &ddr_reg[0]->cm1csratio);
- writel(cmd->cmd1dldiff, &ddr_reg[0]->cm1dldiff);
- writel(cmd->cmd1iclkout, &ddr_reg[0]->cm1iclkout);
+ writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio);
+ writel(cmd->cmd1dldiff, &ddr_cmd_reg[nr]->cm1dldiff);
+ writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout);
- writel(cmd->cmd2csratio, &ddr_reg[0]->cm2csratio);
- writel(cmd->cmd2dldiff, &ddr_reg[0]->cm2dldiff);
- writel(cmd->cmd2iclkout, &ddr_reg[0]->cm2iclkout);
+ writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio);
+ writel(cmd->cmd2dldiff, &ddr_cmd_reg[nr]->cm2dldiff);
+ writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout);
}
/**
* Configure DDR DATA registers
*/
-void config_ddr_data(int macrono, const struct ddr_data *data)
+void config_ddr_data(const struct ddr_data *data, int nr)
{
- writel(data->datardsratio0, &ddr_reg[macrono]->dt0rdsratio0);
- writel(data->datawdsratio0, &ddr_reg[macrono]->dt0wdsratio0);
- writel(data->datawiratio0, &ddr_reg[macrono]->dt0wiratio0);
- writel(data->datagiratio0, &ddr_reg[macrono]->dt0giratio0);
- writel(data->datafwsratio0, &ddr_reg[macrono]->dt0fwsratio0);
- writel(data->datawrsratio0, &ddr_reg[macrono]->dt0wrsratio0);
- writel(data->datauserank0delay, &ddr_reg[macrono]->dt0rdelays0);
- writel(data->datadldiff0, &ddr_reg[macrono]->dt0dldiff0);
+ int i;
+
+ for (i = 0; i < DDR_DATA_REGS_NR; i++) {
+ writel(data->datardsratio0,
+ &(ddr_data_reg[nr]+i)->dt0rdsratio0);
+ writel(data->datawdsratio0,
+ &(ddr_data_reg[nr]+i)->dt0wdsratio0);
+ writel(data->datawiratio0,
+ &(ddr_data_reg[nr]+i)->dt0wiratio0);
+ writel(data->datagiratio0,
+ &(ddr_data_reg[nr]+i)->dt0giratio0);
+ writel(data->datafwsratio0,
+ &(ddr_data_reg[nr]+i)->dt0fwsratio0);
+ writel(data->datawrsratio0,
+ &(ddr_data_reg[nr]+i)->dt0wrsratio0);
+ writel(data->datauserank0delay,
+ &(ddr_data_reg[nr]+i)->dt0rdelays0);
+ writel(data->datadldiff0,
+ &(ddr_data_reg[nr]+i)->dt0dldiff0);
+ }
}
void config_io_ctrl(unsigned long val)
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 01e3a52..aa84e96 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -44,44 +44,65 @@
#ifdef CONFIG_SPL_BUILD
-static struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR;
+static struct dmm_lisa_map_regs *hw_lisa_map_regs =
+ (struct dmm_lisa_map_regs *)DMM_BASE;
+static struct vtp_reg *vtpreg[2] = {
+ (struct vtp_reg *)VTP0_CTRL_ADDR,
+ (struct vtp_reg *)VTP1_CTRL_ADDR};
+#ifdef CONFIG_AM33XX
static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
+#endif
-static void config_vtp(void)
+void config_dmm(const struct dmm_lisa_map_regs *regs)
{
- writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE,
- &vtpreg->vtp0ctrlreg);
- writel(readl(&vtpreg->vtp0ctrlreg) & (~VTP_CTRL_START_EN),
- &vtpreg->vtp0ctrlreg);
- writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_START_EN,
- &vtpreg->vtp0ctrlreg);
+ enable_dmm_clocks();
+
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
+
+ writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3);
+ writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2);
+ writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1);
+ writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0);
+}
+
+static void config_vtp(int nr)
+{
+ writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE,
+ &vtpreg[nr]->vtp0ctrlreg);
+ writel(readl(&vtpreg[nr]->vtp0ctrlreg) & (~VTP_CTRL_START_EN),
+ &vtpreg[nr]->vtp0ctrlreg);
+ writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_START_EN,
+ &vtpreg[nr]->vtp0ctrlreg);
/* Poll for READY */
- while ((readl(&vtpreg->vtp0ctrlreg) & VTP_CTRL_READY) !=
+ while ((readl(&vtpreg[nr]->vtp0ctrlreg) & VTP_CTRL_READY) !=
VTP_CTRL_READY)
;
}
void config_ddr(unsigned int pll, unsigned int ioctrl,
const struct ddr_data *data, const struct cmd_control *ctrl,
- const struct emif_regs *regs)
+ const struct emif_regs *regs, int nr)
{
enable_emif_clocks();
ddr_pll_config(pll);
- config_vtp();
- config_cmd_ctrl(ctrl);
+ config_vtp(nr);
+ config_cmd_ctrl(ctrl, nr);
- config_ddr_data(0, data);
- config_ddr_data(1, data);
-
+ config_ddr_data(data, nr);
+#ifdef CONFIG_AM33XX
config_io_ctrl(ioctrl);
/* Set CKE to be controlled by EMIF/DDR PHY */
writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
+#endif
/* Program EMIF instance */
- config_ddr_phy(regs);
- set_sdram_timings(regs);
- config_sdram(regs);
+ config_ddr_phy(regs, nr);
+ set_sdram_timings(regs, nr);
+ config_sdram(regs, nr);
}
#endif
diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c
index b8f54ab..b86b0de 100644
--- a/arch/arm/cpu/armv7/am33xx/mem.c
+++ b/arch/arm/cpu/armv7/am33xx/mem.c
@@ -83,7 +83,7 @@
/* global settings */
writel(0x00000008, &gpmc_cfg->sysconfig);
writel(0x00000100, &gpmc_cfg->irqstatus);
- writel(0x00000200, &gpmc_cfg->irqenable);
+ writel(0x00000100, &gpmc_cfg->irqenable);
writel(0x00000012, &gpmc_cfg->config);
/*
* Disable the GPMC0 config set by ROM code
diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c
index 507b618..5fd8b47 100644
--- a/arch/arm/cpu/armv7/am33xx/sys_info.c
+++ b/arch/arm/cpu/armv7/am33xx/sys_info.c
@@ -98,6 +98,9 @@
case AM335X:
cpu_s = "AM335X";
break;
+ case TI81XX:
+ cpu_s = "TI81XX";
+ break;
default:
cpu_s = "Unknown cpu type";
break;
@@ -120,7 +123,7 @@
sec_s = "?";
}
- printf("AM%s-%s rev %d\n",
+ printf("%s-%s rev %d\n",
cpu_s, sec_s, get_cpu_rev());
/* TODO: Print ARM and DDR frequencies */
diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c
index 5f6d039..8748c14 100644
--- a/arch/arm/cpu/armv7/cache_v7.c
+++ b/arch/arm/cpu/armv7/cache_v7.c
@@ -340,6 +340,9 @@
{
}
+void arm_init_domains(void)
+{
+}
#endif /* #ifndef CONFIG_SYS_DCACHE_OFF */
#ifndef CONFIG_SYS_ICACHE_OFF
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index d4bce6d..6375a81 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -95,3 +95,48 @@
if (cpu_is_exynos5())
exynos5_dp_phy_control(enable);
}
+
+static void exynos5_set_ps_hold_ctrl(void)
+{
+ struct exynos5_power *power =
+ (struct exynos5_power *)samsung_get_base_power();
+
+ /* Set PS-Hold high */
+ setbits_le32(&power->ps_hold_control,
+ EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
+}
+
+void set_ps_hold_ctrl(void)
+{
+ if (cpu_is_exynos5())
+ exynos5_set_ps_hold_ctrl();
+}
+
+
+static void exynos5_set_xclkout(void)
+{
+ struct exynos5_power *power =
+ (struct exynos5_power *)samsung_get_base_power();
+
+ /* use xxti for xclk out */
+ clrsetbits_le32(&power->pmu_debug, PMU_DEBUG_CLKOUT_SEL_MASK,
+ PMU_DEBUG_XXTI);
+}
+
+void set_xclkout(void)
+{
+ if (cpu_is_exynos5())
+ exynos5_set_xclkout();
+}
+
+/* Enables hardware tripping to power off the system when TMU fails */
+void set_hw_thermal_trip(void)
+{
+ if (cpu_is_exynos5()) {
+ struct exynos5_power *power =
+ (struct exynos5_power *)samsung_get_base_power();
+
+ /* PS_HOLD_CONTROL register ENABLE_HW_TRIP bit*/
+ setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP);
+ }
+}
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 0efc80d..55e82ba 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -36,7 +36,7 @@
COBJS += vc.o
endif
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
COBJS += boot-common.o
SOBJS += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 05ff2e8..70d16a8 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -34,6 +34,12 @@
#include <asm/emif.h>
#include <asm/omap_common.h>
#include <linux/compiler.h>
+#include <asm/cache.h>
+#include <asm/system.h>
+
+#define ARMV7_DCACHE_WRITEBACK 0xe
+#define ARMV7_DOMAIN_CLIENT 1
+#define ARMV7_DOMAIN_MASK (0x3 << 0)
DECLARE_GLOBAL_DATA_PTR;
@@ -269,4 +275,33 @@
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
+
+void dram_bank_mmu_setup(int bank)
+{
+ bd_t *bd = gd->bd;
+ int i;
+
+ u32 start = bd->bi_dram[bank].start >> 20;
+ u32 size = bd->bi_dram[bank].size >> 20;
+ u32 end = start + size;
+
+ debug("%s: bank: %d\n", __func__, bank);
+ for (i = start; i < end; i++)
+ set_section_dcache(i, ARMV7_DCACHE_WRITEBACK);
+
+}
+
+void arm_init_domains(void)
+{
+ u32 reg;
+
+ reg = get_dacr();
+ /*
+ * Set DOMAIN to client access so that all permissions
+ * set in pagetables are validated by the mmu.
+ */
+ reg &= ~ARMV7_DOMAIN_MASK;
+ reg |= ARMV7_DOMAIN_CLIENT;
+ set_dacr(reg);
+}
#endif
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 3581077..b933fe8 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -26,6 +26,7 @@
* MA 02111-1307 USA
*/
+#include <config.h>
#include <asm/arch/omap.h>
#include <asm/arch/spl.h>
#include <linux/linkage.h>
diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c
index 36bea5f..507f687 100644
--- a/arch/arm/cpu/armv7/omap-common/timer.c
+++ b/arch/arm/cpu/armv7/omap-common/timer.c
@@ -34,6 +34,7 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/arch/cpu.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index fa5fad1..36a4c3c 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -254,7 +254,6 @@
#if !defined(CONFIG_TEGRA)
/* Set vector address in CP15 VBAR register */
ldr r0, =_start
- add r0, r0, r9
mcr p15, 0, r0, c12, c0, 0 @Set VBAR
#endif /* !Tegra */
@@ -310,6 +309,12 @@
#endif
mcr p15, 0, r0, c1, c0, 0
+#ifdef CONFIG_ARM_ERRATA_716044
+ mrc p15, 0, r0, c1, c0, 0 @ read system control register
+ orr r0, r0, #1 << 11 @ set bit #11
+ mcr p15, 0, r0, c1, c0, 0 @ write system control register
+#endif
+
#ifdef CONFIG_ARM_ERRATA_742230
mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
orr r0, r0, #1 << 4 @ set bit #4
diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
index ed8c8dd..61d35a8 100644
--- a/arch/arm/dts/exynos5250.dtsi
+++ b/arch/arm/dts/exynos5250.dtsi
@@ -151,4 +151,9 @@
};
};
+ tmu@10060000 {
+ compatible = "samsung,exynos-tmu";
+ reg = <0x10060000 0x10000>;
+ };
+
};
diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi
index 701c0f9..f86d18d 100644
--- a/arch/arm/dts/tegra114.dtsi
+++ b/arch/arm/dts/tegra114.dtsi
@@ -9,6 +9,43 @@
#clock-cells = <1>;
};
+ apbdma: dma {
+ compatible = "nvidia,tegra114-apbdma", "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1400>;
+ interrupts = <0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04
+ 0 128 0x04
+ 0 129 0x04
+ 0 130 0x04
+ 0 131 0x04
+ 0 132 0x04
+ 0 133 0x04
+ 0 134 0x04
+ 0 135 0x04
+ 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04>;
+ };
+
gpio: gpio {
compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
@@ -75,4 +112,108 @@
clocks = <&tegra_car 47>;
status = "disabled";
};
+
+ spi@7000d400 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000d400 0x200>;
+ interrupts = <0 59 0x04>;
+ nvidia,dma-request-selector = <&apbdma 15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ /* PERIPH_ID_SBC1, PLLP_OUT0 */
+ clocks = <&tegra_car 41>;
+ };
+
+ spi@7000d600 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000d600 0x200>;
+ interrupts = <0 82 0x04>;
+ nvidia,dma-request-selector = <&apbdma 16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ /* PERIPH_ID_SBC2, PLLP_OUT0 */
+ clocks = <&tegra_car 44>;
+ };
+
+ spi@7000d800 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000d480 0x200>;
+ interrupts = <0 83 0x04>;
+ nvidia,dma-request-selector = <&apbdma 17>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ /* PERIPH_ID_SBC3, PLLP_OUT0 */
+ clocks = <&tegra_car 46>;
+ };
+
+ spi@7000da00 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000da00 0x200>;
+ interrupts = <0 93 0x04>;
+ nvidia,dma-request-selector = <&apbdma 18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ /* PERIPH_ID_SBC4, PLLP_OUT0 */
+ clocks = <&tegra_car 68>;
+ };
+
+ spi@7000dc00 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000dc00 0x200>;
+ interrupts = <0 94 0x04>;
+ nvidia,dma-request-selector = <&apbdma 27>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ /* PERIPH_ID_SBC5, PLLP_OUT0 */
+ clocks = <&tegra_car 104>;
+ };
+
+ spi@7000de00 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000de00 0x200>;
+ interrupts = <0 79 0x04>;
+ nvidia,dma-request-selector = <&apbdma 28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ /* PERIPH_ID_SBC6, PLLP_OUT0 */
+ clocks = <&tegra_car 105>;
+ };
+
+ sdhci@78000000 {
+ compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+ reg = <0x78000000 0x200>;
+ interrupts = <0 14 0x04>;
+ clocks = <&tegra_car 14>;
+ status = "disable";
+ };
+
+ sdhci@78000200 {
+ compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+ reg = <0x78000200 0x200>;
+ interrupts = <0 15 0x04>;
+ clocks = <&tegra_car 9>;
+ status = "disable";
+ };
+
+ sdhci@78000400 {
+ compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+ reg = <0x78000400 0x200>;
+ interrupts = <0 19 0x04>;
+ clocks = <&tegra_car 69>;
+ status = "disable";
+ };
+
+ sdhci@78000600 {
+ compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+ reg = <0x78000600 0x200>;
+ interrupts = <0 31 0x04>;
+ clocks = <&tegra_car 15>;
+ status = "disable";
+ };
};
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h
index 872ff82..ecb5901 100644
--- a/arch/arm/include/asm/arch-am33xx/clock.h
+++ b/arch/arm/include/asm/arch-am33xx/clock.h
@@ -3,7 +3,7 @@
*
* clock header
*
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ * Copyright (C) 2011, Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index d748dd2..89b63d9 100644
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -3,7 +3,7 @@
*
* AM33xx clock define
*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -19,37 +19,13 @@
#ifndef _CLOCKS_AM33XX_H_
#define _CLOCKS_AM33XX_H_
-#define OSC (V_OSCK/1000000)
-
-/* MAIN PLL Fdll = 550 MHZ, */
-#define MPUPLL_M 550
-#define MPUPLL_N (OSC-1)
-#define MPUPLL_M2 1
-
-/* Core PLL Fdll = 1 GHZ, */
-#define COREPLL_M 1000
-#define COREPLL_N (OSC-1)
-
-#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */
-#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */
-#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */
-
-/*
- * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll
- * frequency needs to be set to 960 MHZ. Hence,
- * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below
- */
-#define PERPLL_M 960
-#define PERPLL_N (OSC-1)
-#define PERPLL_M2 5
-
-/* DDR Freq is 266 MHZ for now */
-/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
-#define DDRPLL_M 266
-#define DDRPLL_N (OSC-1)
-#define DDRPLL_M2 1
+/* MAIN PLL Fdll = 550 MHz, by default */
+#ifndef CONFIG_SYS_MPUCLK
+#define CONFIG_SYS_MPUCLK 550
+#endif
extern void pll_init(void);
extern void enable_emif_clocks(void);
+extern void enable_dmm_clocks(void);
#endif /* endif _CLOCKS_AM33XX_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 16e8a80..3d3a7c8 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -42,9 +42,10 @@
#define HS_DEVICE 0x2
#define GP_DEVICE 0x3
-/* cpu-id for AM33XX family */
+/* cpu-id for AM33XX and TI81XX family */
#define AM335X 0xB944
-#define DEVICE_ID 0x44E10600
+#define TI81XX 0xB81E
+#define DEVICE_ID (CTRL_BASE + 0x0600)
/* This gives the status of the boot mode pins on the evm */
#define SYSBOOT_MASK (BIT(0) | BIT(1) | BIT(2)\
@@ -52,9 +53,11 @@
/* Reset control */
#ifdef CONFIG_AM33XX
-#define PRM_RSTCTRL 0x44E00F00
-#define PRM_RSTST 0x44E00F08
+#define PRM_RSTCTRL (PRCM_BASE + 0x0F00)
+#elif defined(CONFIG_TI814X)
+#define PRM_RSTCTRL (PRCM_BASE + 0x00A0)
#endif
+#define PRM_RSTST (PRM_RSTCTRL + 8)
#define PRM_RSTCTRL_RESET 0x01
#define PRM_RSTST_WARM_RESET_MASK 0x232
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index ae43ef8..260cc34 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -28,6 +28,7 @@
#define VTP_CTRL_START_EN (0x1)
#define PHY_DLL_LOCK_DIFF 0x0
#define DDR_CKE_CTRL_NORMAL 0x1
+#define PHY_EN_DYN_PWRDN (0x1 << 20)
/* Micron MT47H128M16RT-25E */
#define MT47H128M16RT25E_EMIF_READ_LATENCY 0x100005
@@ -82,6 +83,23 @@
#define MT41J256M8HX15E_PHY_FIFO_WE 0x100
#define MT41J256M8HX15E_IOCTRL_VALUE 0x18B
+/* Micron MT41K256M16HA-125E */
+#define MT41K256M16HA125E_EMIF_READ_LATENCY 0x100006
+#define MT41K256M16HA125E_EMIF_TIM1 0x0888A39B
+#define MT41K256M16HA125E_EMIF_TIM2 0x26517FDA
+#define MT41K256M16HA125E_EMIF_TIM3 0x501F84EF
+#define MT41K256M16HA125E_EMIF_SDCFG 0x61C04BB2
+#define MT41K256M16HA125E_EMIF_SDREF 0x0000093B
+#define MT41K256M16HA125E_ZQ_CFG 0x50074BE4
+#define MT41K256M16HA125E_DLL_LOCK_DIFF 0x1
+#define MT41K256M16HA125E_RATIO 0x40
+#define MT41K256M16HA125E_INVERT_CLKOUT 0x0
+#define MT41K256M16HA125E_RD_DQS 0x3C
+#define MT41K256M16HA125E_WR_DQS 0x45
+#define MT41K256M16HA125E_PHY_WR_DATA 0x7F
+#define MT41K256M16HA125E_PHY_FIFO_WE 0x9B
+#define MT41K256M16HA125E_IOCTRL_VALUE 0x18B
+
/* Micron MT41J512M8RH-125 on EVM v1.5 */
#define MT41J512M8RH125_EMIF_READ_LATENCY 0x06
#define MT41J512M8RH125_EMIF_TIM1 0x0888A39B
@@ -100,19 +118,64 @@
#define MT41J512M8RH125_IOCTRL_VALUE 0x18B
/**
+ * Configure DMM
+ */
+void config_dmm(const struct dmm_lisa_map_regs *regs);
+
+/**
* Configure SDRAM
*/
-void config_sdram(const struct emif_regs *regs);
+void config_sdram(const struct emif_regs *regs, int nr);
/**
* Set SDRAM timings
*/
-void set_sdram_timings(const struct emif_regs *regs);
+void set_sdram_timings(const struct emif_regs *regs, int nr);
/**
* Configure DDR PHY
*/
-void config_ddr_phy(const struct emif_regs *regs);
+void config_ddr_phy(const struct emif_regs *regs, int nr);
+
+struct ddr_cmd_regs {
+ unsigned int resv0[7];
+ unsigned int cm0csratio; /* offset 0x01C */
+ unsigned int resv1[2];
+ unsigned int cm0dldiff; /* offset 0x028 */
+ unsigned int cm0iclkout; /* offset 0x02C */
+ unsigned int resv2[8];
+ unsigned int cm1csratio; /* offset 0x050 */
+ unsigned int resv3[2];
+ unsigned int cm1dldiff; /* offset 0x05C */
+ unsigned int cm1iclkout; /* offset 0x060 */
+ unsigned int resv4[8];
+ unsigned int cm2csratio; /* offset 0x084 */
+ unsigned int resv5[2];
+ unsigned int cm2dldiff; /* offset 0x090 */
+ unsigned int cm2iclkout; /* offset 0x094 */
+ unsigned int resv6[3];
+};
+
+struct ddr_data_regs {
+ unsigned int dt0rdsratio0; /* offset 0x0C8 */
+ unsigned int resv1[4];
+ unsigned int dt0wdsratio0; /* offset 0x0DC */
+ unsigned int resv2[4];
+ unsigned int dt0wiratio0; /* offset 0x0F0 */
+ unsigned int resv3;
+ unsigned int dt0wimode0; /* offset 0x0F8 */
+ unsigned int dt0giratio0; /* offset 0x0FC */
+ unsigned int resv4;
+ unsigned int dt0gimode0; /* offset 0x104 */
+ unsigned int dt0fwsratio0; /* offset 0x108 */
+ unsigned int resv5[4];
+ unsigned int dt0dqoffset; /* offset 0x11C */
+ unsigned int dt0wrsratio0; /* offset 0x120 */
+ unsigned int resv6[4];
+ unsigned int dt0rdelays0; /* offset 0x134 */
+ unsigned int dt0dldiff0; /* offset 0x138 */
+ unsigned int resv7[12];
+};
/**
* This structure represents the DDR registers on AM33XX devices.
@@ -193,12 +256,12 @@
/**
* Configure DDR CMD control registers
*/
-void config_cmd_ctrl(const struct cmd_control *cmd);
+void config_cmd_ctrl(const struct cmd_control *cmd, int nr);
/**
* Configure DDR DATA registers
*/
-void config_ddr_data(int data_macrono, const struct ddr_data *data);
+void config_ddr_data(const struct ddr_data *data, int nr);
/**
* This structure represents the DDR io control on AM33XX devices.
@@ -226,6 +289,6 @@
void config_ddr(unsigned int pll, unsigned int ioctrl,
const struct ddr_data *data, const struct cmd_control *ctrl,
- const struct emif_regs *regs);
+ const struct emif_regs *regs, int nr);
#endif /* _DDR_DEFS_H */
diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h
index 6dd3296..5a27f9c 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware.h
@@ -3,7 +3,7 @@
*
* hardware specific header
*
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -19,10 +19,17 @@
#ifndef __AM33XX_HARDWARE_H
#define __AM33XX_HARDWARE_H
+#include <config.h>
#include <asm/arch/omap.h>
+#ifdef CONFIG_AM33XX
+#include <asm/arch/hardware_am33xx.h>
+#elif defined(CONFIG_TI814X)
+#include <asm/arch/hardware_ti814x.h>
+#endif
-/* Module base addresses */
-#define UART0_BASE 0x44E09000
+/*
+ * Common hardware definitions
+ */
/* DM Timer base addresses */
#define DM_TIMER0_BASE 0x4802C000
@@ -37,21 +44,10 @@
/* GPIO Base address */
#define GPIO0_BASE 0x48032000
#define GPIO1_BASE 0x4804C000
-#define GPIO2_BASE 0x481AC000
/* BCH Error Location Module */
#define ELM_BASE 0x48080000
-/* Watchdog Timer */
-#define WDT_BASE 0x44E35000
-
-/* Control Module Base Address */
-#define CTRL_BASE 0x44E10000
-#define CTRL_DEVICE_BASE 0x44E10600
-
-/* PRCM Base Address */
-#define PRCM_BASE 0x44E00000
-
/* EMIF Base address */
#define EMIF4_0_CFG_BASE 0x4C000000
#define EMIF4_1_CFG_BASE 0x4D000000
@@ -66,13 +62,13 @@
#define PRM_DEVICE 0x44E00F00
/* VTP Base address */
-#define VTP0_CTRL_ADDR 0x44E10E0C
+#define VTP1_CTRL_ADDR 0x48140E10
/* DDR Base address */
#define DDR_CTRL_ADDR 0x44E10E04
#define DDR_CONTROL_BASE_ADDR 0x44E11404
-#define DDR_PHY_BASE_ADDR 0x44E12000
-#define DDR_PHY_BASE_ADDR2 0x44E120A4
+#define DDR_PHY_CMD_ADDR2 0x47C0C800
+#define DDR_PHY_DATA_ADDR2 0x47C0C8C8
/* UART */
#define DEFAULT_UART_BASE UART0_BASE
@@ -84,14 +80,10 @@
#define GPMC_BASE 0x50000000
/* CPSW Config space */
-#define AM335X_CPSW_BASE 0x4A100000
-#define AM335X_CPSW_MDIO_BASE 0x4A101000
-
-/* RTC base address */
-#define AM335X_RTC_BASE 0x44E3E000
+#define CPSW_BASE 0x4A100000
/* OTG */
-#define AM335X_USB0_OTG_BASE 0x47401000
-#define AM335X_USB1_OTG_BASE 0x47401800
+#define USB0_OTG_BASE 0x47401000
+#define USB1_OTG_BASE 0x47401800
#endif /* __AM33XX_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
new file mode 100644
index 0000000..fa02f19
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
@@ -0,0 +1,54 @@
+/*
+ * hardware_am33xx.h
+ *
+ * AM33xx hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AM33XX_HARDWARE_AM33XX_H
+#define __AM33XX_HARDWARE_AM33XX_H
+
+/* Module base addresses */
+
+/* UART Base Address */
+#define UART0_BASE 0x44E09000
+
+/* GPIO Base address */
+#define GPIO2_BASE 0x481AC000
+
+/* Watchdog Timer */
+#define WDT_BASE 0x44E35000
+
+/* Control Module Base Address */
+#define CTRL_BASE 0x44E10000
+#define CTRL_DEVICE_BASE 0x44E10600
+
+/* PRCM Base Address */
+#define PRCM_BASE 0x44E00000
+
+/* VTP Base address */
+#define VTP0_CTRL_ADDR 0x44E10E0C
+
+/* DDR Base address */
+#define DDR_PHY_CMD_ADDR 0x44E12000
+#define DDR_PHY_DATA_ADDR 0x44E120C8
+#define DDR_DATA_REGS_NR 2
+
+/* CPSW Config space */
+#define CPSW_MDIO_BASE 0x4A101000
+
+/* RTC base address */
+#define RTC_BASE 0x44E3E000
+
+#endif /* __AM33XX_HARDWARE_AM33XX_H */
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
new file mode 100644
index 0000000..a950ac3
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
@@ -0,0 +1,53 @@
+/*
+ * hardware_ti814x.h
+ *
+ * TI814x hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AM33XX_HARDWARE_TI814X_H
+#define __AM33XX_HARDWARE_TI814X_H
+
+/* Module base addresses */
+
+/* UART Base Address */
+#define UART0_BASE 0x48020000
+
+/* Watchdog Timer */
+#define WDT_BASE 0x481C7000
+
+/* Control Module Base Address */
+#define CTRL_BASE 0x48140000
+
+/* PRCM Base Address */
+#define PRCM_BASE 0x48180000
+
+/* PLL Subsystem Base Address */
+#define PLL_SUBSYS_BASE 0x481C5000
+
+/* VTP Base address */
+#define VTP0_CTRL_ADDR 0x48140E0C
+
+/* DDR Base address */
+#define DDR_PHY_CMD_ADDR 0x47C0C400
+#define DDR_PHY_DATA_ADDR 0x47C0C4C8
+#define DDR_DATA_REGS_NR 4
+
+/* CPSW Config space */
+#define CPSW_MDIO_BASE 0x4A100800
+
+/* RTC base address */
+#define RTC_BASE 0x480C0000
+
+#endif /* __AM33XX_HARDWARE_TI814X_H */
diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
index 33c9c83..51ba791 100644
--- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
@@ -24,4 +24,9 @@
#define OMAP_HSMMC1_BASE 0x48060100
#define OMAP_HSMMC2_BASE 0x481D8100
+#if defined(CONFIG_TI814X)
+#undef MMC_CLOCK_REFERENCE
+#define MMC_CLOCK_REFERENCE 192 /* MHz */
+#endif
+
#endif /* MMC_HOST_DEF_H */
diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h
index 460ac1c..1c6b65f 100644
--- a/arch/arm/include/asm/arch-am33xx/mux.h
+++ b/arch/arm/include/asm/arch-am33xx/mux.h
@@ -1,7 +1,7 @@
/*
* mux.h
*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -19,234 +19,15 @@
#include <common.h>
#include <asm/io.h>
-#define MUX_CFG(value, offset) \
- __raw_writel(value, (CTRL_BASE + offset));
-
-/* PAD Control Fields */
-#define SLEWCTRL (0x1 << 6)
-#define RXACTIVE (0x1 << 5)
-#define PULLDOWN_EN (0x0 << 4) /* Pull Down Selection */
-#define PULLUP_EN (0x1 << 4) /* Pull Up Selection */
-#define PULLUDEN (0x0 << 3) /* Pull up enabled */
-#define PULLUDDIS (0x1 << 3) /* Pull up disabled */
-#define MODE(val) val /* used for Readability */
-
-/*
- * PAD CONTROL OFFSETS
- * Field names corresponds to the pad signal name
- */
-struct pad_signals {
- int gpmc_ad0;
- int gpmc_ad1;
- int gpmc_ad2;
- int gpmc_ad3;
- int gpmc_ad4;
- int gpmc_ad5;
- int gpmc_ad6;
- int gpmc_ad7;
- int gpmc_ad8;
- int gpmc_ad9;
- int gpmc_ad10;
- int gpmc_ad11;
- int gpmc_ad12;
- int gpmc_ad13;
- int gpmc_ad14;
- int gpmc_ad15;
- int gpmc_a0;
- int gpmc_a1;
- int gpmc_a2;
- int gpmc_a3;
- int gpmc_a4;
- int gpmc_a5;
- int gpmc_a6;
- int gpmc_a7;
- int gpmc_a8;
- int gpmc_a9;
- int gpmc_a10;
- int gpmc_a11;
- int gpmc_wait0;
- int gpmc_wpn;
- int gpmc_be1n;
- int gpmc_csn0;
- int gpmc_csn1;
- int gpmc_csn2;
- int gpmc_csn3;
- int gpmc_clk;
- int gpmc_advn_ale;
- int gpmc_oen_ren;
- int gpmc_wen;
- int gpmc_be0n_cle;
- int lcd_data0;
- int lcd_data1;
- int lcd_data2;
- int lcd_data3;
- int lcd_data4;
- int lcd_data5;
- int lcd_data6;
- int lcd_data7;
- int lcd_data8;
- int lcd_data9;
- int lcd_data10;
- int lcd_data11;
- int lcd_data12;
- int lcd_data13;
- int lcd_data14;
- int lcd_data15;
- int lcd_vsync;
- int lcd_hsync;
- int lcd_pclk;
- int lcd_ac_bias_en;
- int mmc0_dat3;
- int mmc0_dat2;
- int mmc0_dat1;
- int mmc0_dat0;
- int mmc0_clk;
- int mmc0_cmd;
- int mii1_col;
- int mii1_crs;
- int mii1_rxerr;
- int mii1_txen;
- int mii1_rxdv;
- int mii1_txd3;
- int mii1_txd2;
- int mii1_txd1;
- int mii1_txd0;
- int mii1_txclk;
- int mii1_rxclk;
- int mii1_rxd3;
- int mii1_rxd2;
- int mii1_rxd1;
- int mii1_rxd0;
- int rmii1_refclk;
- int mdio_data;
- int mdio_clk;
- int spi0_sclk;
- int spi0_d0;
- int spi0_d1;
- int spi0_cs0;
- int spi0_cs1;
- int ecap0_in_pwm0_out;
- int uart0_ctsn;
- int uart0_rtsn;
- int uart0_rxd;
- int uart0_txd;
- int uart1_ctsn;
- int uart1_rtsn;
- int uart1_rxd;
- int uart1_txd;
- int i2c0_sda;
- int i2c0_scl;
- int mcasp0_aclkx;
- int mcasp0_fsx;
- int mcasp0_axr0;
- int mcasp0_ahclkr;
- int mcasp0_aclkr;
- int mcasp0_fsr;
- int mcasp0_axr1;
- int mcasp0_ahclkx;
- int xdma_event_intr0;
- int xdma_event_intr1;
- int nresetin_out;
- int porz;
- int nnmi;
- int osc0_in;
- int osc0_out;
- int rsvd1;
- int tms;
- int tdi;
- int tdo;
- int tck;
- int ntrst;
- int emu0;
- int emu1;
- int osc1_in;
- int osc1_out;
- int pmic_power_en;
- int rtc_porz;
- int rsvd2;
- int ext_wakeup;
- int enz_kaldo_1p8v;
- int usb0_dm;
- int usb0_dp;
- int usb0_ce;
- int usb0_id;
- int usb0_vbus;
- int usb0_drvvbus;
- int usb1_dm;
- int usb1_dp;
- int usb1_ce;
- int usb1_id;
- int usb1_vbus;
- int usb1_drvvbus;
- int ddr_resetn;
- int ddr_csn0;
- int ddr_cke;
- int ddr_ck;
- int ddr_nck;
- int ddr_casn;
- int ddr_rasn;
- int ddr_wen;
- int ddr_ba0;
- int ddr_ba1;
- int ddr_ba2;
- int ddr_a0;
- int ddr_a1;
- int ddr_a2;
- int ddr_a3;
- int ddr_a4;
- int ddr_a5;
- int ddr_a6;
- int ddr_a7;
- int ddr_a8;
- int ddr_a9;
- int ddr_a10;
- int ddr_a11;
- int ddr_a12;
- int ddr_a13;
- int ddr_a14;
- int ddr_a15;
- int ddr_odt;
- int ddr_d0;
- int ddr_d1;
- int ddr_d2;
- int ddr_d3;
- int ddr_d4;
- int ddr_d5;
- int ddr_d6;
- int ddr_d7;
- int ddr_d8;
- int ddr_d9;
- int ddr_d10;
- int ddr_d11;
- int ddr_d12;
- int ddr_d13;
- int ddr_d14;
- int ddr_d15;
- int ddr_dqm0;
- int ddr_dqm1;
- int ddr_dqs0;
- int ddr_dqsn0;
- int ddr_dqs1;
- int ddr_dqsn1;
- int ddr_vref;
- int ddr_vtp;
- int ddr_strben0;
- int ddr_strben1;
- int ain7;
- int ain6;
- int ain5;
- int ain4;
- int ain3;
- int ain2;
- int ain1;
- int ain0;
- int vrefp;
- int vrefn;
-};
+#ifdef CONFIG_AM33XX
+#include <asm/arch/mux_am33xx.h>
+#elif defined(CONFIG_TI814X)
+#include <asm/arch/mux_ti814x.h>
+#endif
struct module_pin_mux {
short reg_offset;
- unsigned char val;
+ unsigned int val;
};
/* Pad control register offset */
@@ -259,4 +40,4 @@
*/
void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux);
-#endif
+#endif /* endif _MUX_H */
diff --git a/arch/arm/include/asm/arch-am33xx/mux_am33xx.h b/arch/arm/include/asm/arch-am33xx/mux_am33xx.h
new file mode 100644
index 0000000..d5cab3e
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/mux_am33xx.h
@@ -0,0 +1,247 @@
+/*
+ * mux_am33xx.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_AM33XX_H_
+#define _MUX_AM33XX_H_
+
+#include <common.h>
+#include <asm/io.h>
+
+#define MUX_CFG(value, offset) \
+ __raw_writel(value, (CTRL_BASE + offset));
+
+/* PAD Control Fields */
+#define SLEWCTRL (0x1 << 6)
+#define RXACTIVE (0x1 << 5)
+#define PULLDOWN_EN (0x0 << 4) /* Pull Down Selection */
+#define PULLUP_EN (0x1 << 4) /* Pull Up Selection */
+#define PULLUDEN (0x0 << 3) /* Pull up enabled */
+#define PULLUDDIS (0x1 << 3) /* Pull up disabled */
+#define MODE(val) val /* used for Readability */
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+ int gpmc_ad0;
+ int gpmc_ad1;
+ int gpmc_ad2;
+ int gpmc_ad3;
+ int gpmc_ad4;
+ int gpmc_ad5;
+ int gpmc_ad6;
+ int gpmc_ad7;
+ int gpmc_ad8;
+ int gpmc_ad9;
+ int gpmc_ad10;
+ int gpmc_ad11;
+ int gpmc_ad12;
+ int gpmc_ad13;
+ int gpmc_ad14;
+ int gpmc_ad15;
+ int gpmc_a0;
+ int gpmc_a1;
+ int gpmc_a2;
+ int gpmc_a3;
+ int gpmc_a4;
+ int gpmc_a5;
+ int gpmc_a6;
+ int gpmc_a7;
+ int gpmc_a8;
+ int gpmc_a9;
+ int gpmc_a10;
+ int gpmc_a11;
+ int gpmc_wait0;
+ int gpmc_wpn;
+ int gpmc_be1n;
+ int gpmc_csn0;
+ int gpmc_csn1;
+ int gpmc_csn2;
+ int gpmc_csn3;
+ int gpmc_clk;
+ int gpmc_advn_ale;
+ int gpmc_oen_ren;
+ int gpmc_wen;
+ int gpmc_be0n_cle;
+ int lcd_data0;
+ int lcd_data1;
+ int lcd_data2;
+ int lcd_data3;
+ int lcd_data4;
+ int lcd_data5;
+ int lcd_data6;
+ int lcd_data7;
+ int lcd_data8;
+ int lcd_data9;
+ int lcd_data10;
+ int lcd_data11;
+ int lcd_data12;
+ int lcd_data13;
+ int lcd_data14;
+ int lcd_data15;
+ int lcd_vsync;
+ int lcd_hsync;
+ int lcd_pclk;
+ int lcd_ac_bias_en;
+ int mmc0_dat3;
+ int mmc0_dat2;
+ int mmc0_dat1;
+ int mmc0_dat0;
+ int mmc0_clk;
+ int mmc0_cmd;
+ int mii1_col;
+ int mii1_crs;
+ int mii1_rxerr;
+ int mii1_txen;
+ int mii1_rxdv;
+ int mii1_txd3;
+ int mii1_txd2;
+ int mii1_txd1;
+ int mii1_txd0;
+ int mii1_txclk;
+ int mii1_rxclk;
+ int mii1_rxd3;
+ int mii1_rxd2;
+ int mii1_rxd1;
+ int mii1_rxd0;
+ int rmii1_refclk;
+ int mdio_data;
+ int mdio_clk;
+ int spi0_sclk;
+ int spi0_d0;
+ int spi0_d1;
+ int spi0_cs0;
+ int spi0_cs1;
+ int ecap0_in_pwm0_out;
+ int uart0_ctsn;
+ int uart0_rtsn;
+ int uart0_rxd;
+ int uart0_txd;
+ int uart1_ctsn;
+ int uart1_rtsn;
+ int uart1_rxd;
+ int uart1_txd;
+ int i2c0_sda;
+ int i2c0_scl;
+ int mcasp0_aclkx;
+ int mcasp0_fsx;
+ int mcasp0_axr0;
+ int mcasp0_ahclkr;
+ int mcasp0_aclkr;
+ int mcasp0_fsr;
+ int mcasp0_axr1;
+ int mcasp0_ahclkx;
+ int xdma_event_intr0;
+ int xdma_event_intr1;
+ int nresetin_out;
+ int porz;
+ int nnmi;
+ int osc0_in;
+ int osc0_out;
+ int rsvd1;
+ int tms;
+ int tdi;
+ int tdo;
+ int tck;
+ int ntrst;
+ int emu0;
+ int emu1;
+ int osc1_in;
+ int osc1_out;
+ int pmic_power_en;
+ int rtc_porz;
+ int rsvd2;
+ int ext_wakeup;
+ int enz_kaldo_1p8v;
+ int usb0_dm;
+ int usb0_dp;
+ int usb0_ce;
+ int usb0_id;
+ int usb0_vbus;
+ int usb0_drvvbus;
+ int usb1_dm;
+ int usb1_dp;
+ int usb1_ce;
+ int usb1_id;
+ int usb1_vbus;
+ int usb1_drvvbus;
+ int ddr_resetn;
+ int ddr_csn0;
+ int ddr_cke;
+ int ddr_ck;
+ int ddr_nck;
+ int ddr_casn;
+ int ddr_rasn;
+ int ddr_wen;
+ int ddr_ba0;
+ int ddr_ba1;
+ int ddr_ba2;
+ int ddr_a0;
+ int ddr_a1;
+ int ddr_a2;
+ int ddr_a3;
+ int ddr_a4;
+ int ddr_a5;
+ int ddr_a6;
+ int ddr_a7;
+ int ddr_a8;
+ int ddr_a9;
+ int ddr_a10;
+ int ddr_a11;
+ int ddr_a12;
+ int ddr_a13;
+ int ddr_a14;
+ int ddr_a15;
+ int ddr_odt;
+ int ddr_d0;
+ int ddr_d1;
+ int ddr_d2;
+ int ddr_d3;
+ int ddr_d4;
+ int ddr_d5;
+ int ddr_d6;
+ int ddr_d7;
+ int ddr_d8;
+ int ddr_d9;
+ int ddr_d10;
+ int ddr_d11;
+ int ddr_d12;
+ int ddr_d13;
+ int ddr_d14;
+ int ddr_d15;
+ int ddr_dqm0;
+ int ddr_dqm1;
+ int ddr_dqs0;
+ int ddr_dqsn0;
+ int ddr_dqs1;
+ int ddr_dqsn1;
+ int ddr_vref;
+ int ddr_vtp;
+ int ddr_strben0;
+ int ddr_strben1;
+ int ain7;
+ int ain6;
+ int ain5;
+ int ain4;
+ int ain3;
+ int ain2;
+ int ain1;
+ int ain0;
+ int vrefp;
+ int vrefn;
+};
+
+#endif /* endif _MUX_AM33XX_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/mux_ti814x.h b/arch/arm/include/asm/arch-am33xx/mux_ti814x.h
new file mode 100644
index 0000000..a26e503
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/mux_ti814x.h
@@ -0,0 +1,311 @@
+/*
+ * mux_ti814x.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_TI814X_H_
+#define _MUX_TI814X_H_
+
+/* PAD Control Fields */
+#define PINCNTL_RSV_MSK (0x3 << 18) /* Reserved bitmask */
+#define PULLUP_EN (0x1 << 17) /* Pull UP Selection */
+#define PULLUDEN (0x0 << 16) /* Pull up enabled */
+#define PULLUDDIS (0x1 << 16) /* Pull up disabled */
+#define MODE(val) val /* used for Readability */
+
+#define MUX_CFG(value, offset) \
+{ \
+ int tmp; \
+ tmp = __raw_readl(CTRL_BASE + offset); \
+ tmp &= PINCNTL_RSV_MSK; \
+ __raw_writel(tmp | value, (CTRL_BASE + offset));\
+}
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+ int pincntl1;
+ int pincntl2;
+ int pincntl3;
+ int pincntl4;
+ int pincntl5;
+ int pincntl6;
+ int pincntl7;
+ int pincntl8;
+ int pincntl9;
+ int pincntl10;
+ int pincntl11;
+ int pincntl12;
+ int pincntl13;
+ int pincntl14;
+ int pincntl15;
+ int pincntl16;
+ int pincntl17;
+ int pincntl18;
+ int pincntl19;
+ int pincntl20;
+ int pincntl21;
+ int pincntl22;
+ int pincntl23;
+ int pincntl24;
+ int pincntl25;
+ int pincntl26;
+ int pincntl27;
+ int pincntl28;
+ int pincntl29;
+ int pincntl30;
+ int pincntl31;
+ int pincntl32;
+ int pincntl33;
+ int pincntl34;
+ int pincntl35;
+ int pincntl36;
+ int pincntl37;
+ int pincntl38;
+ int pincntl39;
+ int pincntl40;
+ int pincntl41;
+ int pincntl42;
+ int pincntl43;
+ int pincntl44;
+ int pincntl45;
+ int pincntl46;
+ int pincntl47;
+ int pincntl48;
+ int pincntl49;
+ int pincntl50;
+ int pincntl51;
+ int pincntl52;
+ int pincntl53;
+ int pincntl54;
+ int pincntl55;
+ int pincntl56;
+ int pincntl57;
+ int pincntl58;
+ int pincntl59;
+ int pincntl60;
+ int pincntl61;
+ int pincntl62;
+ int pincntl63;
+ int pincntl64;
+ int pincntl65;
+ int pincntl66;
+ int pincntl67;
+ int pincntl68;
+ int pincntl69;
+ int pincntl70;
+ int pincntl71;
+ int pincntl72;
+ int pincntl73;
+ int pincntl74;
+ int pincntl75;
+ int pincntl76;
+ int pincntl77;
+ int pincntl78;
+ int pincntl79;
+ int pincntl80;
+ int pincntl81;
+ int pincntl82;
+ int pincntl83;
+ int pincntl84;
+ int pincntl85;
+ int pincntl86;
+ int pincntl87;
+ int pincntl88;
+ int pincntl89;
+ int pincntl90;
+ int pincntl91;
+ int pincntl92;
+ int pincntl93;
+ int pincntl94;
+ int pincntl95;
+ int pincntl96;
+ int pincntl97;
+ int pincntl98;
+ int pincntl99;
+ int pincntl100;
+ int pincntl101;
+ int pincntl102;
+ int pincntl103;
+ int pincntl104;
+ int pincntl105;
+ int pincntl106;
+ int pincntl107;
+ int pincntl108;
+ int pincntl109;
+ int pincntl110;
+ int pincntl111;
+ int pincntl112;
+ int pincntl113;
+ int pincntl114;
+ int pincntl115;
+ int pincntl116;
+ int pincntl117;
+ int pincntl118;
+ int pincntl119;
+ int pincntl120;
+ int pincntl121;
+ int pincntl122;
+ int pincntl123;
+ int pincntl124;
+ int pincntl125;
+ int pincntl126;
+ int pincntl127;
+ int pincntl128;
+ int pincntl129;
+ int pincntl130;
+ int pincntl131;
+ int pincntl132;
+ int pincntl133;
+ int pincntl134;
+ int pincntl135;
+ int pincntl136;
+ int pincntl137;
+ int pincntl138;
+ int pincntl139;
+ int pincntl140;
+ int pincntl141;
+ int pincntl142;
+ int pincntl143;
+ int pincntl144;
+ int pincntl145;
+ int pincntl146;
+ int pincntl147;
+ int pincntl148;
+ int pincntl149;
+ int pincntl150;
+ int pincntl151;
+ int pincntl152;
+ int pincntl153;
+ int pincntl154;
+ int pincntl155;
+ int pincntl156;
+ int pincntl157;
+ int pincntl158;
+ int pincntl159;
+ int pincntl160;
+ int pincntl161;
+ int pincntl162;
+ int pincntl163;
+ int pincntl164;
+ int pincntl165;
+ int pincntl166;
+ int pincntl167;
+ int pincntl168;
+ int pincntl169;
+ int pincntl170;
+ int pincntl171;
+ int pincntl172;
+ int pincntl173;
+ int pincntl174;
+ int pincntl175;
+ int pincntl176;
+ int pincntl177;
+ int pincntl178;
+ int pincntl179;
+ int pincntl180;
+ int pincntl181;
+ int pincntl182;
+ int pincntl183;
+ int pincntl184;
+ int pincntl185;
+ int pincntl186;
+ int pincntl187;
+ int pincntl188;
+ int pincntl189;
+ int pincntl190;
+ int pincntl191;
+ int pincntl192;
+ int pincntl193;
+ int pincntl194;
+ int pincntl195;
+ int pincntl196;
+ int pincntl197;
+ int pincntl198;
+ int pincntl199;
+ int pincntl200;
+ int pincntl201;
+ int pincntl202;
+ int pincntl203;
+ int pincntl204;
+ int pincntl205;
+ int pincntl206;
+ int pincntl207;
+ int pincntl208;
+ int pincntl209;
+ int pincntl210;
+ int pincntl211;
+ int pincntl212;
+ int pincntl213;
+ int pincntl214;
+ int pincntl215;
+ int pincntl216;
+ int pincntl217;
+ int pincntl218;
+ int pincntl219;
+ int pincntl220;
+ int pincntl221;
+ int pincntl222;
+ int pincntl223;
+ int pincntl224;
+ int pincntl225;
+ int pincntl226;
+ int pincntl227;
+ int pincntl228;
+ int pincntl229;
+ int pincntl230;
+ int pincntl231;
+ int pincntl232;
+ int pincntl233;
+ int pincntl234;
+ int pincntl235;
+ int pincntl236;
+ int pincntl237;
+ int pincntl238;
+ int pincntl239;
+ int pincntl240;
+ int pincntl241;
+ int pincntl242;
+ int pincntl243;
+ int pincntl244;
+ int pincntl245;
+ int pincntl246;
+ int pincntl247;
+ int pincntl248;
+ int pincntl249;
+ int pincntl250;
+ int pincntl251;
+ int pincntl252;
+ int pincntl253;
+ int pincntl254;
+ int pincntl255;
+ int pincntl256;
+ int pincntl257;
+ int pincntl258;
+ int pincntl259;
+ int pincntl260;
+ int pincntl261;
+ int pincntl262;
+ int pincntl263;
+ int pincntl264;
+ int pincntl265;
+ int pincntl266;
+ int pincntl267;
+ int pincntl268;
+ int pincntl269;
+ int pincntl270;
+};
+
+#endif /* endif _MUX_TI814X_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
index 850f8a5..d28f9a8 100644
--- a/arch/arm/include/asm/arch-am33xx/omap.h
+++ b/arch/arm/include/asm/arch-am33xx/omap.h
@@ -28,8 +28,13 @@
* Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
* at 0x40304000(EMU base) so that our code works for both EMU and GP
*/
+#ifdef CONFIG_AM33XX
#define NON_SECURE_SRAM_START 0x40304000
#define NON_SECURE_SRAM_END 0x4030E000
+#elif defined(CONFIG_TI814X)
+#define NON_SECURE_SRAM_START 0x40300000
+#define NON_SECURE_SRAM_END 0x40320000
+#endif
/* ROM code defines */
/* Boot device */
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index e961ce0..f60b086 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -25,8 +25,13 @@
#define BOOT_DEVICE_XIP 2
#define BOOT_DEVICE_NAND 5
+#ifdef CONFIG_AM33XX
#define BOOT_DEVICE_MMC1 8
#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */
+#elif defined(CONFIG_TI814X)
+#define BOOT_DEVICE_MMC1 9
+#define BOOT_DEVICE_MMC2 8 /* ROM only supports 2nd instance */
+#endif
#define BOOT_DEVICE_SPI 11
#define BOOT_DEVICE_UART 65
#define BOOT_DEVICE_USBETH 68
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 97ab60d..0910a94 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -34,6 +34,8 @@
void ddr_pll_config(unsigned int ddrpll_M);
void sdelay(unsigned long);
+
+struct gpmc_cs;
void gpmc_init(void);
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size);
diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h
new file mode 100644
index 0000000..b07c4a0
--- /dev/null
+++ b/arch/arm/include/asm/arch-bcm2835/mbox.h
@@ -0,0 +1,433 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BCM2835_MBOX_H
+#define _BCM2835_MBOX_H
+
+#include <linux/compiler.h>
+
+/*
+ * The BCM2835 SoC contains (at least) two CPUs; the VideoCore (a/k/a "GPU")
+ * and the ARM CPU. The ARM CPU is often thought of as the main CPU.
+ * However, the VideoCore actually controls the initial SoC boot, and hides
+ * much of the hardware behind a protocol. This protocol is transported
+ * using the SoC's mailbox hardware module.
+ *
+ * The mailbox hardware supports passing 32-bit values back and forth.
+ * Presumably by software convention of the firmware, the bottom 4 bits of the
+ * value are used to indicate a logical channel, and the upper 28 bits are the
+ * actual payload. Various channels exist using these simple raw messages. See
+ * https://github.com/raspberrypi/firmware/wiki/Mailboxes for a list. As an
+ * example, the messages on the power management channel are a bitmask of
+ * devices whose power should be enabled.
+ *
+ * The property mailbox channel passes messages that contain the (16-byte
+ * aligned) ARM physical address of a memory buffer. This buffer is passed to
+ * the VC for processing, is modified in-place by the VC, and the address then
+ * passed back to the ARM CPU as the response mailbox message to indicate
+ * request completion. The buffers have a generic and extensible format; each
+ * buffer contains a standard header, a list of "tags", and a terminating zero
+ * entry. Each tag contains an ID indicating its type, and length fields for
+ * generic parsing. With some limitations, an arbitrary set of tags may be
+ * combined together into a single message buffer. This file defines structs
+ * representing the header and many individual tag layouts and IDs.
+ */
+
+/* Raw mailbox HW */
+
+#define BCM2835_MBOX_PHYSADDR 0x2000b880
+
+struct bcm2835_mbox_regs {
+ u32 read;
+ u32 rsvd0[5];
+ u32 status;
+ u32 config;
+ u32 write;
+};
+
+#define BCM2835_MBOX_STATUS_WR_FULL 0x80000000
+#define BCM2835_MBOX_STATUS_RD_EMPTY 0x40000000
+
+/* Lower 4-bits are channel ID */
+#define BCM2835_CHAN_MASK 0xf
+#define BCM2835_MBOX_PACK(chan, data) (((data) & (~BCM2835_CHAN_MASK)) | \
+ (chan & BCM2835_CHAN_MASK))
+#define BCM2835_MBOX_UNPACK_CHAN(val) ((val) & BCM2835_CHAN_MASK)
+#define BCM2835_MBOX_UNPACK_DATA(val) ((val) & (~BCM2835_CHAN_MASK))
+
+/* Property mailbox buffer structures */
+
+#define BCM2835_MBOX_PROP_CHAN 8
+
+/* All message buffers must start with this header */
+struct bcm2835_mbox_hdr {
+ u32 buf_size;
+ u32 code;
+};
+
+#define BCM2835_MBOX_REQ_CODE 0
+#define BCM2835_MBOX_RESP_CODE_SUCCESS 0x80000000
+
+#define BCM2835_MBOX_INIT_HDR(_m_) { \
+ memset((_m_), 0, sizeof(*(_m_))); \
+ (_m_)->hdr.buf_size = sizeof(*(_m_)); \
+ (_m_)->hdr.code = 0; \
+ (_m_)->end_tag = 0; \
+ }
+
+/*
+ * A message buffer contains a list of tags. Each tag must also start with
+ * a standardized header.
+ */
+struct bcm2835_mbox_tag_hdr {
+ u32 tag;
+ u32 val_buf_size;
+ u32 val_len;
+};
+
+#define BCM2835_MBOX_INIT_TAG(_t_, _id_) { \
+ (_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \
+ (_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \
+ (_t_)->tag_hdr.val_len = sizeof((_t_)->body.req); \
+ }
+
+#define BCM2835_MBOX_INIT_TAG_NO_REQ(_t_, _id_) { \
+ (_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \
+ (_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \
+ (_t_)->tag_hdr.val_len = 0; \
+ }
+
+/* When responding, the VC sets this bit in val_len to indicate a response */
+#define BCM2835_MBOX_TAG_VAL_LEN_RESPONSE 0x80000000
+
+/*
+ * Below we define the ID and struct for many possible tags. This header only
+ * defines individual tag structs, not entire message structs, since in
+ * general an arbitrary set of tags may be combined into a single message.
+ * Clients of the mbox API are expected to define their own overall message
+ * structures by combining the header, a set of tags, and a terminating
+ * entry. For example,
+ *
+ * struct msg {
+ * struct bcm2835_mbox_hdr hdr;
+ * struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
+ * ... perhaps other tags here ...
+ * u32 end_tag;
+ * };
+ */
+
+#define BCM2835_MBOX_TAG_GET_ARM_MEMORY 0x00010005
+
+struct bcm2835_mbox_tag_get_arm_mem {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ } req;
+ struct {
+ u32 mem_base;
+ u32 mem_size;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_GET_CLOCK_RATE 0x00030002
+
+#define BCM2835_MBOX_CLOCK_ID_EMMC 1
+#define BCM2835_MBOX_CLOCK_ID_UART 2
+#define BCM2835_MBOX_CLOCK_ID_ARM 3
+#define BCM2835_MBOX_CLOCK_ID_CORE 4
+#define BCM2835_MBOX_CLOCK_ID_V3D 5
+#define BCM2835_MBOX_CLOCK_ID_H264 6
+#define BCM2835_MBOX_CLOCK_ID_ISP 7
+#define BCM2835_MBOX_CLOCK_ID_SDRAM 8
+#define BCM2835_MBOX_CLOCK_ID_PIXEL 9
+#define BCM2835_MBOX_CLOCK_ID_PWM 10
+
+struct bcm2835_mbox_tag_get_clock_rate {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ u32 clock_id;
+ } req;
+ struct {
+ u32 clock_id;
+ u32 rate_hz;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_ALLOCATE_BUFFER 0x00040001
+
+struct bcm2835_mbox_tag_allocate_buffer {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ u32 alignment;
+ } req;
+ struct {
+ u32 fb_address;
+ u32 fb_size;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_RELEASE_BUFFER 0x00048001
+
+struct bcm2835_mbox_tag_release_buffer {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ } req;
+ struct {
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_BLANK_SCREEN 0x00040002
+
+struct bcm2835_mbox_tag_blank_screen {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ /* bit 0 means on, other bots reserved */
+ u32 state;
+ } req;
+ struct {
+ u32 state;
+ } resp;
+ } body;
+};
+
+/* Physical means output signal */
+#define BCM2835_MBOX_TAG_GET_PHYSICAL_W_H 0x00040003
+#define BCM2835_MBOX_TAG_TEST_PHYSICAL_W_H 0x00044003
+#define BCM2835_MBOX_TAG_SET_PHYSICAL_W_H 0x00048003
+
+struct bcm2835_mbox_tag_physical_w_h {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ /* req not used for get */
+ struct {
+ u32 width;
+ u32 height;
+ } req;
+ struct {
+ u32 width;
+ u32 height;
+ } resp;
+ } body;
+};
+
+/* Virtual means display buffer */
+#define BCM2835_MBOX_TAG_GET_VIRTUAL_W_H 0x00040004
+#define BCM2835_MBOX_TAG_TEST_VIRTUAL_W_H 0x00044004
+#define BCM2835_MBOX_TAG_SET_VIRTUAL_W_H 0x00048004
+
+struct bcm2835_mbox_tag_virtual_w_h {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ /* req not used for get */
+ struct {
+ u32 width;
+ u32 height;
+ } req;
+ struct {
+ u32 width;
+ u32 height;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_GET_DEPTH 0x00040005
+#define BCM2835_MBOX_TAG_TEST_DEPTH 0x00044005
+#define BCM2835_MBOX_TAG_SET_DEPTH 0x00048005
+
+struct bcm2835_mbox_tag_depth {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ /* req not used for get */
+ struct {
+ u32 bpp;
+ } req;
+ struct {
+ u32 bpp;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_GET_PIXEL_ORDER 0x00040006
+#define BCM2835_MBOX_TAG_TEST_PIXEL_ORDER 0x00044005
+#define BCM2835_MBOX_TAG_SET_PIXEL_ORDER 0x00048006
+
+#define BCM2835_MBOX_PIXEL_ORDER_BGR 0
+#define BCM2835_MBOX_PIXEL_ORDER_RGB 1
+
+struct bcm2835_mbox_tag_pixel_order {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ /* req not used for get */
+ struct {
+ u32 order;
+ } req;
+ struct {
+ u32 order;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_GET_ALPHA_MODE 0x00040007
+#define BCM2835_MBOX_TAG_TEST_ALPHA_MODE 0x00044007
+#define BCM2835_MBOX_TAG_SET_ALPHA_MODE 0x00048007
+
+#define BCM2835_MBOX_ALPHA_MODE_0_OPAQUE 0
+#define BCM2835_MBOX_ALPHA_MODE_0_TRANSPARENT 1
+#define BCM2835_MBOX_ALPHA_MODE_IGNORED 2
+
+struct bcm2835_mbox_tag_alpha_mode {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ /* req not used for get */
+ struct {
+ u32 alpha;
+ } req;
+ struct {
+ u32 alpha;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_GET_PITCH 0x00040008
+
+struct bcm2835_mbox_tag_pitch {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ } req;
+ struct {
+ u32 pitch;
+ } resp;
+ } body;
+};
+
+/* Offset of display window within buffer */
+#define BCM2835_MBOX_TAG_GET_VIRTUAL_OFFSET 0x00040009
+#define BCM2835_MBOX_TAG_TEST_VIRTUAL_OFFSET 0x00044009
+#define BCM2835_MBOX_TAG_SET_VIRTUAL_OFFSET 0x00048009
+
+struct bcm2835_mbox_tag_virtual_offset {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ /* req not used for get */
+ struct {
+ u32 x;
+ u32 y;
+ } req;
+ struct {
+ u32 x;
+ u32 y;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_GET_OVERSCAN 0x0004000a
+#define BCM2835_MBOX_TAG_TEST_OVERSCAN 0x0004400a
+#define BCM2835_MBOX_TAG_SET_OVERSCAN 0x0004800a
+
+struct bcm2835_mbox_tag_overscan {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ /* req not used for get */
+ struct {
+ u32 top;
+ u32 bottom;
+ u32 left;
+ u32 right;
+ } req;
+ struct {
+ u32 top;
+ u32 bottom;
+ u32 left;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_GET_PALETTE 0x0004000b
+
+struct bcm2835_mbox_tag_get_palette {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ } req;
+ struct {
+ u32 data[1024];
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_TEST_PALETTE 0x0004400b
+
+struct bcm2835_mbox_tag_test_palette {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ u32 offset;
+ u32 num_entries;
+ u32 data[256];
+ } req;
+ struct {
+ u32 is_invalid;
+ } resp;
+ } body;
+};
+
+#define BCM2835_MBOX_TAG_SET_PALETTE 0x0004800b
+
+struct bcm2835_mbox_tag_set_palette {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ u32 offset;
+ u32 num_entries;
+ u32 data[256];
+ } req;
+ struct {
+ u32 is_invalid;
+ } resp;
+ } body;
+};
+
+/*
+ * Pass a raw u32 message to the VC, and receive a raw u32 back.
+ *
+ * Returns 0 for success, any other value for error.
+ */
+int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv);
+
+/*
+ * Pass a complete property-style buffer to the VC, and wait until it has
+ * been processed.
+ *
+ * This function expects a pointer to the mbox_hdr structure in an attempt
+ * to ensure some degree of type safety. However, some number of tags and
+ * a termination value are expected to immediately follow the header in
+ * memory, as required by the property protocol.
+ *
+ * Returns 0 for success, any other value for error.
+ */
+int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer);
+
+#endif
diff --git a/arch/arm/include/asm/arch-bcm2835/sdhci.h b/arch/arm/include/asm/arch-bcm2835/sdhci.h
new file mode 100644
index 0000000..a4f867b
--- /dev/null
+++ b/arch/arm/include/asm/arch-bcm2835/sdhci.h
@@ -0,0 +1,24 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BCM2835_SDHCI_H_
+#define _BCM2835_SDHCI_H_
+
+#define BCM2835_SDHCI_BASE 0x20300000
+
+int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq);
+
+#endif
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index d2fdb59..3549667 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -857,6 +857,9 @@
void set_usbhost_phy_ctrl(unsigned int enable);
+/* Enables hardware tripping to power off the system when TMU fails */
+void set_hw_thermal_trip(void);
+
#define POWER_USB_HOST_PHY_CTRL_EN (1 << 0)
#define POWER_USB_HOST_PHY_CTRL_DISABLE (0 << 0)
@@ -864,4 +867,25 @@
#define EXYNOS_DP_PHY_ENABLE (1 << 0)
+#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH (1 << 8)
+#define POWER_ENABLE_HW_TRIP (1UL << 31)
+
+/*
+ * Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
+void set_ps_hold_ctrl(void);
+
+/* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI clock source */
+#define PMU_DEBUG_XXTI 0x1000
+/* Mask bit[12:8] for xxti clock selection */
+#define PMU_DEBUG_CLKOUT_SEL_MASK 0x1f00
+
+/*
+ * Pmu debug is used for xclkout, enable xclkout with
+ * source as XXTI
+ */
+void set_xclkout(void);
#endif
diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h
index 306b41d..46b25a6 100644
--- a/arch/arm/include/asm/arch-exynos/spl.h
+++ b/arch/arm/include/asm/arch-exynos/spl.h
@@ -78,11 +78,12 @@
*/
u32 uboot_size;
enum boot_mode boot_source; /* Boot device */
- enum mem_manuf mem_manuf; /* Memory Manufacturer */
unsigned frequency_mhz; /* Frequency of memory in MHz */
unsigned arm_freq_mhz; /* ARM Frequency in MHz */
u32 serial_base; /* Serial base address */
u32 i2c_base; /* i2c base address */
+ u32 board_rev_gpios; /* Board revision GPIOs */
+ enum mem_manuf mem_manuf; /* Memory Manufacturer */
} __attribute__((__packed__));
#endif
diff --git a/arch/arm/include/asm/arch-exynos/tmu.h b/arch/arm/include/asm/arch-exynos/tmu.h
new file mode 100644
index 0000000..7e0158e
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/tmu.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Akshay Saraswat <akshay.s@samsung.com>
+ *
+ * EXYNOS - Thermal Management Unit
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TMU_H
+#define __ASM_ARCH_TMU_H
+
+struct exynos5_tmu_reg {
+ unsigned triminfo;
+ unsigned rsvd1;
+ unsigned rsvd2;
+ unsigned rsvd3;
+ unsigned rsvd4;
+ unsigned triminfo_control;
+ unsigned rsvd5;
+ unsigned rsvd6;
+ unsigned tmu_control;
+ unsigned rsvd7;
+ unsigned tmu_status;
+ unsigned sampling_internal;
+ unsigned counter_value0;
+ unsigned counter_value1;
+ unsigned rsvd8;
+ unsigned rsvd9;
+ unsigned current_temp;
+ unsigned rsvd10;
+ unsigned rsvd11;
+ unsigned rsvd12;
+ unsigned threshold_temp_rise;
+ unsigned threshold_temp_fall;
+ unsigned rsvd13;
+ unsigned rsvd14;
+ unsigned past_temp3_0;
+ unsigned past_temp7_4;
+ unsigned past_temp11_8;
+ unsigned past_temp15_12;
+ unsigned inten;
+ unsigned intstat;
+ unsigned intclear;
+ unsigned rsvd15;
+ unsigned emul_con;
+};
+#endif /* __ASM_ARCH_TMU_H */
diff --git a/arch/arm/include/asm/arch-tegra/board.h b/arch/arm/include/asm/arch-tegra/board.h
index 3db0d93..1a66990 100644
--- a/arch/arm/include/asm/arch-tegra/board.h
+++ b/arch/arm/include/asm/arch-tegra/board.h
@@ -25,8 +25,7 @@
#define _TEGRA_BOARD_H_
/* Set up pinmux to make UART usable */
-void gpio_config_uart(void); /* CONFIG_SPI_UART_SWITCH */
-void gpio_early_init_uart(void); /*!CONFIG_SPI_UART_SWITCH */
+void gpio_early_init_uart(void);
/* Set up early UART output */
void board_init_uart_f(void);
diff --git a/arch/arm/include/asm/arch-tegra/tegra_slink.h b/arch/arm/include/asm/arch-tegra/tegra_slink.h
deleted file mode 100644
index 74804b5..0000000
--- a/arch/arm/include/asm/arch-tegra/tegra_slink.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * NVIDIA Tegra SPI-SLINK controller
- *
- * Copyright 2010-2013 NVIDIA Corporation
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TEGRA_SLINK_H_
-#define _TEGRA_SLINK_H_
-
-#include <asm/types.h>
-
-struct slink_tegra {
- u32 command; /* SLINK_COMMAND_0 register */
- u32 command2; /* SLINK_COMMAND2_0 reg */
- u32 status; /* SLINK_STATUS_0 register */
- u32 reserved; /* Reserved offset 0C */
- u32 mas_data; /* SLINK_MAS_DATA_0 reg */
- u32 slav_data; /* SLINK_SLAVE_DATA_0 reg */
- u32 dma_ctl; /* SLINK_DMA_CTL_0 register */
- u32 status2; /* SLINK_STATUS2_0 reg */
- u32 rsvd[56]; /* 0x20 to 0xFF reserved */
- u32 tx_fifo; /* SLINK_TX_FIFO_0 reg off 100h */
- u32 rsvd2[31]; /* 0x104 to 0x17F reserved */
- u32 rx_fifo; /* SLINK_RX_FIFO_0 reg off 180h */
-};
-
-/* COMMAND */
-#define SLINK_CMD_ENB (1 << 31)
-#define SLINK_CMD_GO (1 << 30)
-#define SLINK_CMD_M_S (1 << 28)
-#define SLINK_CMD_CK_SDA (1 << 21)
-#define SLINK_CMD_CS_POL (1 << 13)
-#define SLINK_CMD_CS_VAL (1 << 12)
-#define SLINK_CMD_CS_SOFT (1 << 11)
-#define SLINK_CMD_BIT_LENGTH (1 << 4)
-#define SLINK_CMD_BIT_LENGTH_MASK 0x0000001F
-/* COMMAND2 */
-#define SLINK_CMD2_TXEN (1 << 30)
-#define SLINK_CMD2_RXEN (1 << 31)
-#define SLINK_CMD2_SS_EN (1 << 18)
-#define SLINK_CMD2_SS_EN_SHIFT 18
-#define SLINK_CMD2_SS_EN_MASK 0x000C0000
-#define SLINK_CMD2_CS_ACTIVE_BETWEEN (1 << 17)
-/* STATUS */
-#define SLINK_STAT_BSY (1 << 31)
-#define SLINK_STAT_RDY (1 << 30)
-#define SLINK_STAT_ERR (1 << 29)
-#define SLINK_STAT_RXF_FLUSH (1 << 27)
-#define SLINK_STAT_TXF_FLUSH (1 << 26)
-#define SLINK_STAT_RXF_OVF (1 << 25)
-#define SLINK_STAT_TXF_UNR (1 << 24)
-#define SLINK_STAT_RXF_EMPTY (1 << 23)
-#define SLINK_STAT_RXF_FULL (1 << 22)
-#define SLINK_STAT_TXF_EMPTY (1 << 21)
-#define SLINK_STAT_TXF_FULL (1 << 20)
-#define SLINK_STAT_TXF_OVF (1 << 19)
-#define SLINK_STAT_RXF_UNR (1 << 18)
-#define SLINK_STAT_CUR_BLKCNT (1 << 15)
-/* STATUS2 */
-#define SLINK_STAT2_RXF_FULL_CNT (1 << 16)
-#define SLINK_STAT2_TXF_FULL_CNT (1 << 0)
-
-#define SPI_TIMEOUT 1000
-#define TEGRA_SPI_MAX_FREQ 52000000
-
-#endif /* _TEGRA_SLINK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/tegra_spi.h b/arch/arm/include/asm/arch-tegra/tegra_spi.h
deleted file mode 100644
index d53a93f..0000000
--- a/arch/arm/include/asm/arch-tegra/tegra_spi.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * NVIDIA Tegra20 SPI-FLASH controller
- *
- * Copyright 2010-2012 NVIDIA Corporation
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TEGRA_SPI_H_
-#define _TEGRA_SPI_H_
-
-#include <asm/types.h>
-
-struct spi_tegra {
- u32 command; /* SPI_COMMAND_0 register */
- u32 status; /* SPI_STATUS_0 register */
- u32 rx_cmp; /* SPI_RX_CMP_0 register */
- u32 dma_ctl; /* SPI_DMA_CTL_0 register */
- u32 tx_fifo; /* SPI_TX_FIFO_0 register */
- u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */
- u32 rx_fifo; /* SPI_RX_FIFO_0 register */
-};
-
-#define SPI_CMD_GO (1 << 30)
-#define SPI_CMD_ACTIVE_SCLK_SHIFT 26
-#define SPI_CMD_ACTIVE_SCLK_MASK (3 << SPI_CMD_ACTIVE_SCLK_SHIFT)
-#define SPI_CMD_CK_SDA (1 << 21)
-#define SPI_CMD_ACTIVE_SDA_SHIFT 18
-#define SPI_CMD_ACTIVE_SDA_MASK (3 << SPI_CMD_ACTIVE_SDA_SHIFT)
-#define SPI_CMD_CS_POL (1 << 16)
-#define SPI_CMD_TXEN (1 << 15)
-#define SPI_CMD_RXEN (1 << 14)
-#define SPI_CMD_CS_VAL (1 << 13)
-#define SPI_CMD_CS_SOFT (1 << 12)
-#define SPI_CMD_CS_DELAY (1 << 9)
-#define SPI_CMD_CS3_EN (1 << 8)
-#define SPI_CMD_CS2_EN (1 << 7)
-#define SPI_CMD_CS1_EN (1 << 6)
-#define SPI_CMD_CS0_EN (1 << 5)
-#define SPI_CMD_BIT_LENGTH (1 << 4)
-#define SPI_CMD_BIT_LENGTH_MASK 0x0000001F
-
-#define SPI_STAT_BSY (1 << 31)
-#define SPI_STAT_RDY (1 << 30)
-#define SPI_STAT_RXF_FLUSH (1 << 29)
-#define SPI_STAT_TXF_FLUSH (1 << 28)
-#define SPI_STAT_RXF_UNR (1 << 27)
-#define SPI_STAT_TXF_OVF (1 << 26)
-#define SPI_STAT_RXF_EMPTY (1 << 25)
-#define SPI_STAT_RXF_FULL (1 << 24)
-#define SPI_STAT_TXF_EMPTY (1 << 23)
-#define SPI_STAT_TXF_FULL (1 << 22)
-#define SPI_STAT_SEL_TXRX_N (1 << 16)
-#define SPI_STAT_CUR_BLKCNT (1 << 15)
-
-#define SPI_TIMEOUT 1000
-#define TEGRA_SPI_MAX_FREQ 52000000
-
-#endif /* _TEGRA_SPI_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
index 1ef1a14..41ce677 100644
--- a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
@@ -74,4 +74,10 @@
u32 aocfg0; /* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */
};
+/* SDMMC1/3 settings from section 27.5 of T114 TRM */
+#define SDIOCFG_DRVUP_SLWF 0
+#define SDIOCFG_DRVDN_SLWR 0
+#define SDIOCFG_DRVUP 0x24
+#define SDIOCFG_DRVDN 0x14
+
#endif /* _TEGRA114_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/tegra114_spi.h b/arch/arm/include/asm/arch-tegra114/tegra114_spi.h
new file mode 100644
index 0000000..48197bc
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/tegra114_spi.h
@@ -0,0 +1,41 @@
+/*
+ * NVIDIA Tegra SPI controller
+ *
+ * Copyright 2010-2013 NVIDIA Corporation
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA114_SPI_H_
+#define _TEGRA114_SPI_H_
+
+#include <asm/types.h>
+
+int tegra114_spi_init(int *node_list, int count);
+int tegra114_spi_cs_is_valid(unsigned int bus, unsigned int cs);
+struct spi_slave *tegra114_spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
+void tegra114_spi_free_slave(struct spi_slave *slave);
+int tegra114_spi_claim_bus(struct spi_slave *slave);
+void tegra114_spi_cs_activate(struct spi_slave *slave);
+void tegra114_spi_cs_deactivate(struct spi_slave *slave);
+int tegra114_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *data_out, void *data_in, unsigned long flags);
+
+#endif /* _TEGRA114_SPI_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/tegra20_sflash.h b/arch/arm/include/asm/arch-tegra20/tegra20_sflash.h
new file mode 100644
index 0000000..e8cc68c
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra20/tegra20_sflash.h
@@ -0,0 +1,41 @@
+/*
+ * NVIDIA Tegra20 SPI-FLASH controller
+ *
+ * Copyright 2010-2012 NVIDIA Corporation
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA20_SPI_H_
+#define _TEGRA20_SPI_H_
+
+#include <asm/types.h>
+
+int tegra20_spi_cs_is_valid(unsigned int bus, unsigned int cs);
+struct spi_slave *tegra20_spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
+void tegra20_spi_free_slave(struct spi_slave *slave);
+int tegra20_spi_init(int *node_list, int count);
+int tegra20_spi_claim_bus(struct spi_slave *slave);
+void tegra20_spi_cs_activate(struct spi_slave *slave);
+void tegra20_spi_cs_deactivate(struct spi_slave *slave);
+int tegra20_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *data_out, void *data_in, unsigned long flags);
+
+#endif /* _TEGRA20_SPI_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/tegra20_slink.h b/arch/arm/include/asm/arch-tegra20/tegra20_slink.h
new file mode 100644
index 0000000..5aa74dd
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra20/tegra20_slink.h
@@ -0,0 +1,41 @@
+/*
+ * NVIDIA Tegra SPI-SLINK controller
+ *
+ * Copyright 2010-2013 NVIDIA Corporation
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA30_SPI_H_
+#define _TEGRA30_SPI_H_
+
+#include <asm/types.h>
+
+int tegra30_spi_init(int *node_list, int count);
+int tegra30_spi_cs_is_valid(unsigned int bus, unsigned int cs);
+struct spi_slave *tegra30_spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
+void tegra30_spi_free_slave(struct spi_slave *slave);
+int tegra30_spi_claim_bus(struct spi_slave *slave);
+void tegra30_spi_cs_activate(struct spi_slave *slave);
+void tegra30_spi_cs_deactivate(struct spi_slave *slave);
+int tegra30_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *data_out, void *data_in, unsigned long flags);
+
+#endif /* _TEGRA30_SPI_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h b/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h
deleted file mode 100644
index 82ac180..0000000
--- a/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _UART_SPI_SWITCH_H
-#define _UART_SPI_SWITCH_H
-
-#if defined(CONFIG_SPI_UART_SWITCH)
-/*
- * Signal that we are about to use the UART. This unfortunate hack is
- * required by Seaboard, which cannot use its console and SPI at the same
- * time! If the board file provides this, the board config will declare it.
- * Let this be a lesson for others.
- */
-void pinmux_select_uart(void);
-
-/*
- * Signal that we are about the use the SPI bus.
- */
-void pinmux_select_spi(void);
-
-#else /* not CONFIG_SPI_UART_SWITCH */
-
-static inline void pinmux_select_uart(void) {}
-static inline void pinmux_select_spi(void) {}
-
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index eef6a5a..8153484 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -41,7 +41,9 @@
void l2_cache_enable(void);
void l2_cache_disable(void);
+void set_section_dcache(int section, enum dcache_option option);
+void dram_bank_mmu_setup(int bank);
/*
* The current upper bound for ARM L1 data cache line sizes is 64 bytes. We
* use that value for aligning DMA buffers unless the board config has specified
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 1918492..760345f 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -81,6 +81,20 @@
isb();
}
+static inline unsigned int get_dacr(void)
+{
+ unsigned int val;
+ asm("mrc p15, 0, %0, c3, c0, 0 @ get DACR" : "=r" (val) : : "cc");
+ return val;
+}
+
+static inline void set_dacr(unsigned int val)
+{
+ asm volatile("mcr p15, 0, %0, c3, c0, 0 @ set DACR"
+ : : "r" (val) : "cc");
+ isb();
+}
+
/* options available for data cache on each page */
enum dcache_option {
DCACHE_OFF = 0x12,
diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c
index b6e5e95..4abe1cf 100644
--- a/arch/arm/lib/cache-cp15.c
+++ b/arch/arm/lib/cache-cp15.c
@@ -23,6 +23,8 @@
#include <common.h>
#include <asm/system.h>
+#include <asm/cache.h>
+#include <linux/compiler.h>
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
@@ -34,6 +36,10 @@
void arm_init_before_mmu(void)
__attribute__((weak, alias("__arm_init_before_mmu")));
+__weak void arm_init_domains(void)
+{
+}
+
static void cp_delay (void)
{
volatile int i;
@@ -77,7 +83,7 @@
mmu_page_table_flush((u32)&page_table[start], (u32)&page_table[end]);
}
-static inline void dram_bank_mmu_setup(int bank)
+__weak void dram_bank_mmu_setup(int bank)
{
bd_t *bd = gd->bd;
int i;
@@ -115,6 +121,9 @@
/* Set the access control to all-supervisor */
asm volatile("mcr p15, 0, %0, c3, c0, 0"
: : "r" (~0));
+
+ arm_init_domains();
+
/* and enable the mmu */
reg = get_cr(); /* get control reg. */
cp_delay();
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
index e0e8235..629ce4a 100644
--- a/board/cm_t35/cm_t35.c
+++ b/board/cm_t35/cm_t35.c
@@ -34,7 +34,9 @@
#include <i2c.h>
#include <usb.h>
#include <mmc.h>
+#include <nand.h>
#include <twl4030.h>
+#include <bmp_layout.h>
#include <linux/compiler.h>
#include <asm/io.h>
@@ -76,6 +78,65 @@
0,
};
+#ifdef CONFIG_LCD
+#ifdef CONFIG_CMD_NAND
+static int splash_load_from_nand(u32 bmp_load_addr)
+{
+ struct bmp_header *bmp_hdr;
+ int res, splash_screen_nand_offset = 0x100000;
+ size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
+
+ if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
+ goto splash_address_too_high;
+
+ res = nand_read_skip_bad(&nand_info[nand_curr_device],
+ splash_screen_nand_offset, &bmp_header_size,
+ (u_char *)bmp_load_addr);
+ if (res < 0)
+ return res;
+
+ bmp_hdr = (struct bmp_header *)bmp_load_addr;
+ bmp_size = le32_to_cpu(bmp_hdr->file_size);
+
+ if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
+ goto splash_address_too_high;
+
+ return nand_read_skip_bad(&nand_info[nand_curr_device],
+ splash_screen_nand_offset, &bmp_size,
+ (u_char *)bmp_load_addr);
+
+splash_address_too_high:
+ printf("Error: splashimage address too high. Data overwrites U-Boot "
+ "and/or placed beyond DRAM boundaries.\n");
+
+ return -1;
+}
+#else
+static inline int splash_load_from_nand(void)
+{
+ return -1;
+}
+#endif /* CONFIG_CMD_NAND */
+
+int board_splash_screen_prepare(void)
+{
+ char *env_splashimage_value;
+ u32 bmp_load_addr;
+
+ env_splashimage_value = getenv("splashimage");
+ if (env_splashimage_value == NULL)
+ return -1;
+
+ bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
+ if (bmp_load_addr == 0) {
+ printf("Error: bad splashimage address specified\n");
+ return -1;
+ }
+
+ return splash_load_from_nand(bmp_load_addr);
+}
+#endif /* CONFIG_LCD */
+
/*
* Routine: board_init
* Description: hardware init.
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 7d9f361..8d7a227 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -132,10 +132,7 @@
clock_init();
clock_verify();
-#ifdef CONFIG_SPI_UART_SWITCH
- gpio_config_uart();
-#endif
-#if defined(CONFIG_TEGRA_SPI) || defined(CONFIG_TEGRA_SLINK)
+#ifdef CONFIG_FDT_SPI
pin_mux_spi();
spi_init();
#endif
diff --git a/board/nvidia/common/common.mk b/board/nvidia/common/common.mk
index bd6202c..d9bcb85 100644
--- a/board/nvidia/common/common.mk
+++ b/board/nvidia/common/common.mk
@@ -1,4 +1,3 @@
# common options for all tegra boards
COBJS-y += ../../nvidia/common/board.o
-COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o
COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o
diff --git a/board/nvidia/common/uart-spi-switch.c b/board/nvidia/common/uart-spi-switch.c
deleted file mode 100644
index e9d445d..0000000
--- a/board/nvidia/common/uart-spi-switch.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/uart-spi-switch.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/tegra_spi.h>
-#include <asm/arch-tegra/board.h>
-
-/* position of the UART/SPI select switch */
-enum spi_uart_switch {
- SWITCH_UNKNOWN,
- SWITCH_SPI,
- SWITCH_UART,
- SWITCH_BOTH
-};
-
-/* Information about the spi/uart switch */
-struct spi_uart {
- int gpio; /* GPIO to control switch */
- u32 port; /* Port number of UART affected */
-};
-
-static struct spi_uart local;
-static enum spi_uart_switch switch_pos; /* Current switch position */
-
-
-static void get_config(struct spi_uart *config)
-{
-#if defined CONFIG_SPI_CORRUPTS_UART
- config->gpio = CONFIG_UART_DISABLE_GPIO;
- config->port = CONFIG_SPI_CORRUPTS_UART_NR;
-#else
- config->gpio = -1;
-#endif
-}
-
-/*
- * Init the UART / SPI switch. This can be called before relocation so we must
- * not access BSS.
- */
-void gpio_early_init_uart(void)
-{
- struct spi_uart config;
-
- get_config(&config);
- if (config.gpio != -1) {
- /* Cannot provide a label prior to relocation */
- gpio_request(config.gpio, NULL);
- gpio_direction_output(config.gpio, 0);
- }
-}
-
-/*
- * Configure the UART / SPI switch.
- */
-void gpio_config_uart(void)
-{
- get_config(&local);
- if (local.gpio != -1) {
- gpio_direction_output(local.gpio, 0);
- switch_pos = SWITCH_UART;
- } else {
- /*
- * If we're here we don't have a SPI switch; go ahead and
- * enable the SPI now. We didn't in spi_init() so we wouldn't
- * kill the UART.
- */
- pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
- switch_pos = SWITCH_BOTH;
- }
-}
-
-static void spi_uart_switch(struct spi_uart *config,
- enum spi_uart_switch new_pos)
-{
- if (switch_pos == SWITCH_BOTH || new_pos == switch_pos)
- return;
-
- /* pre-delay, allow SPI/UART to settle, FIFO to empty, etc. */
- udelay(CONFIG_SPI_CORRUPTS_UART_DLY);
-
- /* We need to dynamically change the pinmux, shared w/UART RXD/CTS */
- pinmux_set_func(PINGRP_GMC, new_pos == SWITCH_SPI ?
- PMUX_FUNC_SFLASH : PMUX_FUNC_UARTD);
-
- /*
- * On Seaboard, MOSI/MISO are shared w/UART.
- * Use GPIO I3 (UART_DISABLE) to tristate UART during SPI activity.
- * Enable UART later (cs_deactivate) so we can use it for U-Boot comms.
- */
- gpio_direction_output(config->gpio, new_pos == SWITCH_SPI);
- switch_pos = new_pos;
-}
-
-void pinmux_select_uart(void)
-{
- spi_uart_switch(&local, SWITCH_UART);
-}
-
-void pinmux_select_spi(void)
-{
- spi_uart_switch(&local, SWITCH_SPI);
-}
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
index 2020a5f..2c23a29 100644
--- a/board/nvidia/dalmore/dalmore.c
+++ b/board/nvidia/dalmore/dalmore.c
@@ -16,7 +16,12 @@
#include <common.h>
#include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
#include "pinmux-config-dalmore.h"
+#include <i2c.h>
+
+#define BAT_I2C_ADDRESS 0x48 /* TPS65090 charger */
+#define PMU_I2C_ADDRESS 0x58 /* TPS65913 PMU */
/*
* Routine: pinmux_init
@@ -32,4 +37,65 @@
pinmux_config_table(unused_pins_lowpower,
ARRAY_SIZE(unused_pins_lowpower));
+
+ /* Initialize any non-default pad configs (APB_MISC_GP regs) */
+ padgrp_config_table(dalmore_padctrl, ARRAY_SIZE(dalmore_padctrl));
}
+
+#if defined(CONFIG_TEGRA_MMC)
+/*
+ * Do I2C/PMU writes to bring up SD card bus power
+ *
+ */
+void board_sdmmc_voltage_init(void)
+{
+ uchar reg, data_buffer[1];
+ int ret;
+
+ ret = i2c_set_bus_num(0);/* PMU is on bus 0 */
+ if (ret)
+ printf("%s: i2c_set_bus_num returned %d\n", __func__, ret);
+
+ /* TPS65913: LDO9_VOLTAGE = 3.3V */
+ data_buffer[0] = 0x31;
+ reg = 0x61;
+
+ ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+ if (ret)
+ printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
+ __func__, reg, data_buffer[0], ret);
+
+ /* TPS65913: LDO9_CTRL = Active */
+ data_buffer[0] = 0x01;
+ reg = 0x60;
+
+ ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+ if (ret)
+ printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
+ __func__, reg, data_buffer[0], ret);
+
+ /* TPS65090: FET6_CTRL = enable output auto discharge, enable FET6 */
+ data_buffer[0] = 0x03;
+ reg = 0x14;
+
+ ret = i2c_write(BAT_I2C_ADDRESS, reg, 1, data_buffer, 1);
+ if (ret)
+ printf("%s: BAT i2c_write %02X<-%02X returned %d\n",
+ __func__, reg, data_buffer[0], ret);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+ /*
+ * NOTE: We don't do mmc-specific pin muxes here.
+ * They were done globally in pinmux_init().
+ */
+
+ /* Bring up the SDIO3 power rail */
+ board_sdmmc_voltage_init();
+}
+#endif /* MMC */
diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h
index 3ef6f4e..8c05a15 100644
--- a/board/nvidia/dalmore/pinmux-config-dalmore.h
+++ b/board/nvidia/dalmore/pinmux-config-dalmore.h
@@ -361,4 +361,10 @@
DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT),
};
+
+static struct padctrl_config dalmore_padctrl[] = {
+ /* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+ DEFAULT_PADCFG(SDIO3, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \
+ SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, NONE, NONE),
+};
#endif /* PINMUX_CONFIG_COMMON_H */
diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts
index 30cf1fb..86e9459 100644
--- a/board/nvidia/dts/tegra114-dalmore.dts
+++ b/board/nvidia/dts/tegra114-dalmore.dts
@@ -12,6 +12,8 @@
i2c2 = "/i2c@7000c400";
i2c3 = "/i2c@7000c500";
i2c4 = "/i2c@7000c700";
+ sdhci0 = "/sdhci@78000600";
+ sdhci1 = "/sdhci@78000400";
};
memory {
@@ -43,4 +45,20 @@
status = "okay";
clock-frequency = <400000>;
};
+
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ };
+
+ sdhci@78000400 {
+ cd-gpios = <&gpio 170 1>; /* gpio PV2 */
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ sdhci@78000600 {
+ bus-width = <8>;
+ status = "okay";
+ };
};
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index e581fdd..498e513 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -31,7 +31,7 @@
#include <asm/gpio.h>
/* TODO: Remove this code when the SPI switch is working */
-#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+#if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
void gpio_early_init_uart(void)
{
/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 55bc018..1708ac2 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -61,7 +61,7 @@
static void rtc32k_enable(void)
{
- struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE;
+ struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
@@ -159,7 +159,7 @@
enable_board_pin_mux();
config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
- &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data);
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
#endif
}
@@ -199,8 +199,8 @@
};
static struct cpsw_platform_data cpsw_data = {
- .mdio_base = AM335X_CPSW_MDIO_BASE,
- .cpsw_base = AM335X_CPSW_BASE,
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
.mdio_div = 0xff,
.channels = 8,
.cpdma_reg_ofs = 0x800,
diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c
index 688b0aa..6b3e095 100644
--- a/board/raspberrypi/rpi_b/rpi_b.c
+++ b/board/raspberrypi/rpi_b/rpi_b.c
@@ -15,13 +15,39 @@
*/
#include <common.h>
+#include <asm/arch/mbox.h>
+#include <asm/arch/sdhci.h>
#include <asm/global_data.h>
DECLARE_GLOBAL_DATA_PTR;
+struct msg_get_arm_mem {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
+ u32 end_tag;
+};
+
+struct msg_get_clock_rate {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
+ u32 end_tag;
+};
+
int dram_init(void)
{
- gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ ALLOC_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1, 16);
+ int ret;
+
+ BCM2835_MBOX_INIT_HDR(msg);
+ BCM2835_MBOX_INIT_TAG(&msg->get_arm_mem, GET_ARM_MEMORY);
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query ARM memory size\n");
+ return -1;
+ }
+
+ gd->ram_size = msg->get_arm_mem.body.resp.mem_size;
return 0;
}
@@ -32,3 +58,22 @@
return 0;
}
+
+int board_mmc_init(void)
+{
+ ALLOC_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1, 16);
+ int ret;
+
+ BCM2835_MBOX_INIT_HDR(msg_clk);
+ BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE);
+ msg_clk->get_clock_rate.body.req.clock_id = BCM2835_MBOX_CLOCK_ID_EMMC;
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query eMMC clock rate\n");
+ return -1;
+ }
+
+ return bcm2835_sdhci_init(BCM2835_SDHCI_BASE,
+ msg_clk->get_clock_rate.body.resp.rate_hz);
+}
diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts
index cbfab6f..1c2d52d 100644
--- a/board/samsung/dts/exynos5250-smdk5250.dts
+++ b/board/samsung/dts/exynos5250-smdk5250.dts
@@ -66,4 +66,17 @@
compatible = "maxim,max77686_pmic";
};
};
+
+ tmu@10060000 {
+ samsung,min-temp = <25>;
+ samsung,max-temp = <125>;
+ samsung,start-warning = <95>;
+ samsung,start-tripping = <105>;
+ samsung,hw-tripping = <110>;
+ samsung,efuse-min-value = <40>;
+ samsung,efuse-value = <55>;
+ samsung,efuse-max-value = <100>;
+ samsung,slope = <274761730>;
+ samsung,dc-value = <25>;
+ };
};
diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts
new file mode 100644
index 0000000..8b303bf
--- /dev/null
+++ b/board/samsung/dts/exynos5250-snow.dts
@@ -0,0 +1,58 @@
+/*
+ * SAMSUNG Snow board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "Google Snow";
+ compatible = "google,snow", "samsung,exynos5250";
+
+ aliases {
+ i2c0 = "/i2c@12c60000";
+ i2c1 = "/i2c@12c70000";
+ i2c2 = "/i2c@12c80000";
+ i2c3 = "/i2c@12c90000";
+ i2c4 = "/i2c@12ca0000";
+ i2c5 = "/i2c@12cb0000";
+ i2c6 = "/i2c@12cc0000";
+ i2c7 = "/i2c@12cd0000";
+ spi0 = "/spi@12d20000";
+ spi1 = "/spi@12d30000";
+ spi2 = "/spi@12d40000";
+ spi3 = "/spi@131a0000";
+ spi4 = "/spi@131b0000";
+ };
+
+ sound@12d60000 {
+ samsung,i2s-epll-clock-frequency = <192000000>;
+ samsung,i2s-sampling-rate = <48000>;
+ samsung,i2s-bits-per-sample = <16>;
+ samsung,i2s-channels = <2>;
+ samsung,i2s-lr-clk-framesize = <256>;
+ samsung,i2s-bit-clk-framesize = <32>;
+ samsung,codec-type = "max98095";
+ };
+
+ i2c@12cd0000 {
+ soundcodec@22 {
+ reg = <0x22>;
+ compatible = "maxim,max98095-codec";
+ };
+ };
+
+ i2c@12c60000 {
+ pmic@9 {
+ reg = <0x9>;
+ compatible = "maxim,max77686_pmic";
+ };
+ };
+};
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 7a5f132..217c6df 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -23,6 +23,7 @@
#include <common.h>
#include <fdtdec.h>
#include <asm/io.h>
+#include <errno.h>
#include <i2c.h>
#include <lcd.h>
#include <netdev.h>
@@ -35,9 +36,40 @@
#include <asm/arch/sromc.h>
#include <asm/arch/dp_info.h>
#include <power/pmic.h>
+#include <power/max77686_pmic.h>
+#include <tmu.h>
DECLARE_GLOBAL_DATA_PTR;
+#if defined CONFIG_EXYNOS_TMU
+/*
+ * Boot Time Thermal Analysis for SoC temperature threshold breach
+ */
+static void boot_temp_check(void)
+{
+ int temp;
+
+ switch (tmu_monitor(&temp)) {
+ /* Status TRIPPED ans WARNING means corresponding threshold breach */
+ case TMU_STATUS_TRIPPED:
+ puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
+ set_ps_hold_ctrl();
+ hang();
+ break;
+ case TMU_STATUS_WARNING:
+ puts("EXYNOS_TMU: WARNING! Temperature very high\n");
+ break;
+ /*
+ * TMU_STATUS_INIT means something is wrong with temperature sensing
+ * and TMU status was changed back from NORMAL to INIT.
+ */
+ case TMU_STATUS_INIT:
+ default:
+ debug("EXYNOS_TMU: Unknown TMU state\n");
+ }
+}
+#endif
+
#ifdef CONFIG_USB_EHCI_EXYNOS
int board_usb_vbus_init(void)
{
@@ -54,15 +86,39 @@
}
#endif
+#ifdef CONFIG_SOUND_MAX98095
+static void board_enable_audio_codec(void)
+{
+ struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+ samsung_get_base_gpio_part1();
+
+ /* Enable MAX98095 Codec */
+ s5p_gpio_direction_output(&gpio1->x1, 7, 1);
+ s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
+}
+#endif
+
int board_init(void)
{
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+
+#if defined CONFIG_EXYNOS_TMU
+ if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
+ debug("%s: Failed to init TMU\n", __func__);
+ return -1;
+ }
+ boot_temp_check();
+#endif
+
#ifdef CONFIG_EXYNOS_SPI
spi_init();
#endif
#ifdef CONFIG_USB_EHCI_EXYNOS
board_usb_vbus_init();
#endif
+#ifdef CONFIG_SOUND_MAX98095
+ board_enable_audio_codec();
+#endif
return 0;
}
@@ -80,12 +136,119 @@
}
#if defined(CONFIG_POWER)
+static int pmic_reg_update(struct pmic *p, int reg, uint regval)
+{
+ u32 val;
+ int ret = 0;
+
+ ret = pmic_reg_read(p, reg, &val);
+ if (ret) {
+ debug("%s: PMIC %d register read failed\n", __func__, reg);
+ return -1;
+ }
+ val |= regval;
+ ret = pmic_reg_write(p, reg, val);
+ if (ret) {
+ debug("%s: PMIC %d register write failed\n", __func__, reg);
+ return -1;
+ }
+ return 0;
+}
+
int power_init_board(void)
{
+ struct pmic *p;
+
+ set_ps_hold_ctrl();
+
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
if (pmic_init(I2C_PMIC))
return -1;
- else
- return 0;
+
+ p = pmic_get("MAX77686_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
+ MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
+ return -1;
+
+ /* VDD_MIF */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
+ MAX77686_BUCK1OUT_1V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK1OUT);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
+ MAX77686_BUCK1CTRL_EN))
+ return -1;
+
+ /* VDD_ARM */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
+ MAX77686_BUCK2DVS1_1_3V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK2DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
+ MAX77686_BUCK2CTRL_ON))
+ return -1;
+
+ /* VDD_INT */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
+ MAX77686_BUCK3DVS1_1_0125V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK3DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_G3D */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
+ MAX77686_BUCK4DVS1_1_2V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK4DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_LDO2 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
+ MAX77686_LD02CTRL1_1_5V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO3 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
+ MAX77686_LD03CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO5 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
+ MAX77686_LD05CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO10 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
+ MAX77686_LD10CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ return 0;
}
#endif
@@ -212,8 +375,17 @@
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
- printf("\nBoard: SMDK5250\n");
+#ifdef CONFIG_OF_CONTROL
+ const char *board_name;
+ board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+ if (board_name == NULL)
+ printf("\nUnknown Board\n");
+ else
+ printf("\nBoard: %s\n", board_name);
+#else
+ printf("\nBoard: SMDK5250\n");
+#endif
return 0;
}
#endif
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index f4b972b..12620bb 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -134,7 +134,7 @@
static void rtc32k_enable(void)
{
- struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE;
+ struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
@@ -208,6 +208,14 @@
.datadldiff0 = PHY_DLL_LOCK_DIFF,
};
+static const struct ddr_data ddr3_beagleblack_data = {
+ .datardsratio0 = MT41K256M16HA125E_RD_DQS,
+ .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+ .datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
static const struct ddr_data ddr3_evm_data = {
.datardsratio0 = MT41J512M8RH125_RD_DQS,
.datawdsratio0 = MT41J512M8RH125_WR_DQS,
@@ -230,6 +238,20 @@
.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
};
+static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = {
+ .cmd0csratio = MT41K256M16HA125E_RATIO,
+ .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
+ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd1csratio = MT41K256M16HA125E_RATIO,
+ .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
+ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd2csratio = MT41K256M16HA125E_RATIO,
+ .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
+ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+
static const struct cmd_control ddr3_evm_cmd_ctrl_data = {
.cmd0csratio = MT41J512M8RH125_RATIO,
.cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
@@ -251,7 +273,18 @@
.sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
.sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
.zq_config = MT41J128MJT125_ZQ_CFG,
- .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY,
+ .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
+ PHY_EN_DYN_PWRDN,
+};
+
+static struct emif_regs ddr3_beagleblack_emif_reg_data = {
+ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+ .zq_config = MT41K256M16HA125E_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
};
static struct emif_regs ddr3_evm_emif_reg_data = {
@@ -261,7 +294,8 @@
.sdram_tim2 = MT41J512M8RH125_EMIF_TIM2,
.sdram_tim3 = MT41J512M8RH125_EMIF_TIM3,
.zq_config = MT41J512M8RH125_ZQ_CFG,
- .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY,
+ .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY |
+ PHY_EN_DYN_PWRDN,
};
#endif
@@ -341,15 +375,20 @@
gpio_direction_output(GPIO_DDR_VTT_EN, 1);
}
- if (board_is_evm_sk() || board_is_bone_lt())
+ if (board_is_evm_sk())
config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
- &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data);
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+ else if (board_is_bone_lt())
+ config_ddr(303, MT41K256M16HA125E_IOCTRL_VALUE,
+ &ddr3_beagleblack_data,
+ &ddr3_beagleblack_cmd_ctrl_data,
+ &ddr3_beagleblack_emif_reg_data, 0);
else if (board_is_evm_15_or_later())
config_ddr(303, MT41J512M8RH125_IOCTRL_VALUE, &ddr3_evm_data,
- &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data);
+ &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0);
else
config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data,
- &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data);
+ &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
#endif
}
@@ -412,8 +451,8 @@
};
static struct cpsw_platform_data cpsw_data = {
- .mdio_base = AM335X_CPSW_MDIO_BASE,
- .cpsw_base = AM335X_CPSW_BASE,
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
.mdio_div = 0xff,
.channels = 8,
.cpdma_reg_ofs = 0x800,
diff --git a/board/ti/ti814x/Makefile b/board/ti/ti814x/Makefile
new file mode 100644
index 0000000..09d2422
--- /dev/null
+++ b/board/ti/ti814x/Makefile
@@ -0,0 +1,46 @@
+#
+# Makefile
+#
+# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+ifdef CONFIG_SPL_BUILD
+COBJS := mux.o
+endif
+
+COBJS += evm.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
new file mode 100644
index 0000000..446e36b
--- /dev/null
+++ b/board/ti/ti814x/evm.c
@@ -0,0 +1,198 @@
+/*
+ * evm.c
+ *
+ * Board functions for TI814x EVM
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include "evm.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+#endif
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+static void rtc32k_enable(void)
+{
+ struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
+
+ /*
+ * Unlock the RTC's registers. For more details please see the
+ * RTC_SS section of the TRM. In order to unlock we need to
+ * write these specific values (keys) in this order.
+ */
+ writel(0x83e70b13, &rtc->kick0r);
+ writel(0x95a4f1e0, &rtc->kick1r);
+
+ /* Enable the RTC 32K OSC by setting bits 3 and 6. */
+ writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+
+static void uart_enable(void)
+{
+ u32 regVal;
+
+ /* UART softreset */
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_RESET;
+ writel(regVal, &uart_base->uartsyscfg);
+ while ((readl(&uart_base->uartsyssts) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+ ;
+
+ /* Disable smart idle */
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_SMART_IDLE_EN;
+ writel(regVal, &uart_base->uartsyscfg);
+}
+
+static void wdt_disable(void)
+{
+ writel(0xAAAA, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+ writel(0x5555, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+}
+
+static const struct cmd_control evm_ddr2_cctrl_data = {
+ .cmd0csratio = 0x80,
+ .cmd0dldiff = 0x04,
+ .cmd0iclkout = 0x00,
+
+ .cmd1csratio = 0x80,
+ .cmd1dldiff = 0x04,
+ .cmd1iclkout = 0x00,
+
+ .cmd2csratio = 0x80,
+ .cmd2dldiff = 0x04,
+ .cmd2iclkout = 0x00,
+};
+
+static const struct emif_regs evm_ddr2_emif0_regs = {
+ .sdram_config = 0x40801ab2,
+ .ref_ctrl = 0x10000c30,
+ .sdram_tim1 = 0x0aaaf552,
+ .sdram_tim2 = 0x043631d2,
+ .sdram_tim3 = 0x00000327,
+ .emif_ddr_phy_ctlr_1 = 0x00000007
+};
+
+static const struct emif_regs evm_ddr2_emif1_regs = {
+ .sdram_config = 0x40801ab2,
+ .ref_ctrl = 0x10000c30,
+ .sdram_tim1 = 0x0aaaf552,
+ .sdram_tim2 = 0x043631d2,
+ .sdram_tim3 = 0x00000327,
+ .emif_ddr_phy_ctlr_1 = 0x00000007
+};
+
+const struct dmm_lisa_map_regs evm_lisa_map_regs = {
+ .dmm_lisa_map_0 = 0x00000000,
+ .dmm_lisa_map_1 = 0x00000000,
+ .dmm_lisa_map_2 = 0x806c0300,
+ .dmm_lisa_map_3 = 0x806c0300,
+};
+
+static const struct ddr_data evm_ddr2_data = {
+ .datardsratio0 = ((0x35<<10) | (0x35<<0)),
+ .datawdsratio0 = ((0x20<<10) | (0x20<<0)),
+ .datawiratio0 = ((0<<10) | (0<<0)),
+ .datagiratio0 = ((0<<10) | (0<<0)),
+ .datafwsratio0 = ((0x90<<10) | (0x90<<0)),
+ .datawrsratio0 = ((0x50<<10) | (0x50<<0)),
+ .datauserank0delay = 1,
+ .datadldiff0 = 0x4,
+};
+#endif
+
+/*
+ * early system init of muxing and clocks.
+ */
+void s_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ /* WDT1 is already running when the bootloader gets control
+ * Disable it to avoid "random" resets
+ */
+ wdt_disable();
+
+ /* Setup the PLLs and the clocks for the peripherals */
+ pll_init();
+
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+
+ /* Set UART pins */
+ enable_uart0_pin_mux();
+
+ /* Set MMC pins */
+ enable_mmc1_pin_mux();
+
+ /* Enable UART */
+ uart_enable();
+
+ gd = &gdata;
+
+ preloader_console_init();
+
+ config_dmm(&evm_lisa_map_regs);
+
+ config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,
+ &evm_ddr2_emif0_regs, 0);
+ config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,
+ &evm_ddr2_emif1_regs, 1);
+#endif
+}
+
+/*
+ * Basic board specific setup. Pinmux has been handled already.
+ */
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ return 0;
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(1, 0, 0, -1, -1);
+
+ return 0;
+}
+#endif
diff --git a/board/ti/ti814x/evm.h b/board/ti/ti814x/evm.h
new file mode 100644
index 0000000..40f8710
--- /dev/null
+++ b/board/ti/ti814x/evm.h
@@ -0,0 +1,7 @@
+#ifndef _EVM_H
+#define _EVM_H
+
+void enable_uart0_pin_mux(void);
+void enable_mmc1_pin_mux(void);
+
+#endif /* _EVM_H */
diff --git a/board/ti/ti814x/mux.c b/board/ti/ti814x/mux.c
new file mode 100644
index 0000000..137acb4
--- /dev/null
+++ b/board/ti/ti814x/mux.c
@@ -0,0 +1,51 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "evm.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(pincntl70), PULLUP_EN | MODE(0x01)}, /* UART0_RXD */
+ {OFFSET(pincntl71), PULLUP_EN | MODE(0x01)}, /* UART0_TXD */
+ {-1},
+};
+
+static struct module_pin_mux mmc1_pin_mux[] = {
+ {OFFSET(pincntl1), PULLUP_EN | MODE(0x01)}, /* SD1_CLK */
+ {OFFSET(pincntl2), PULLUP_EN | MODE(0x01)}, /* SD1_CMD */
+ {OFFSET(pincntl3), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[0] */
+ {OFFSET(pincntl4), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[1] */
+ {OFFSET(pincntl5), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[2] */
+ {OFFSET(pincntl6), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[3] */
+ {OFFSET(pincntl74), PULLUP_EN | MODE(0x40)}, /* SD1_POW */
+ {OFFSET(pincntl75), MODE(0x40)}, /* SD1_SDWP */
+ {OFFSET(pincntl80), PULLUP_EN | MODE(0x02)}, /* SD1_SDCD */
+ {-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+}
+
+void enable_mmc1_pin_mux(void)
+{
+ configure_module_pin_mux(mmc1_pin_mux);
+}
diff --git a/boards.cfg b/boards.cfg
index ee68fdd..5fc70be 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -241,6 +241,7 @@
am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5
am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6
am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT
+ti814x_evm arm armv7 ti814x ti am33xx
pcm051 arm armv7 pcm051 phytec am33xx pcm051
highbank arm armv7 highbank - highbank
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
@@ -297,6 +298,7 @@
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
origen arm armv7 origen samsung exynos
s5pc210_universal arm armv7 universal_c210 samsung exynos
+snow arm armv7 smdk5250 samsung exynos
smdk5250 arm armv7 smdk5250 samsung exynos
smdkv310 arm armv7 smdkv310 samsung exynos
trats arm armv7 trats samsung exynos
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index cd94423..edbd4a8 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -27,7 +27,9 @@
#include <dtt.h>
#include <i2c.h>
+#include <tmu.h>
+#if defined CONFIG_DTT_SENSORS
static unsigned long sensor_initialized;
static void _initialize_dtt(void)
@@ -59,9 +61,11 @@
/* switch back to original I2C bus */
I2C_SET_BUS(old_bus);
}
+#endif
-int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+int dtt_i2c(void)
{
+#if defined CONFIG_DTT_SENSORS
int i;
unsigned char sensors[] = CONFIG_DTT_SENSORS;
int old_bus;
@@ -83,8 +87,34 @@
/* switch back to original I2C bus */
I2C_SET_BUS(old_bus);
+#endif
return 0;
+}
+
+int dtt_tmu(void)
+{
+#if defined CONFIG_TMU_CMD_DTT
+ int cur_temp;
+
+ /* Sense and return latest thermal info */
+ if (tmu_monitor(&cur_temp) == TMU_STATUS_INIT) {
+ puts("TMU is in unknown state, temperature is invalid\n");
+ return -1;
+ }
+ printf("Current temperature: %u degrees Celsius\n", cur_temp);
+#endif
+ return 0;
+}
+
+int do_dtt(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ int err = 0;
+
+ err |= dtt_i2c();
+ err |= dtt_tmu();
+
+ return err;
} /* do_dtt() */
/***************************************************/
diff --git a/common/lcd.c b/common/lcd.c
index 590bbb9..77914ad 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -386,8 +386,6 @@
lcd_base = (void *)(gd->fb_base);
- lcd_get_size(&lcd_line_length);
-
lcd_init(lcd_base); /* LCD initialization */
/* Device initialization */
@@ -470,6 +468,8 @@
debug("[LCD] Initializing LCD frambuffer at %p\n", lcdbase);
lcd_ctrl_init(lcdbase);
+ lcd_get_size(&lcd_line_length);
+ lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
lcd_is_enabled = 1;
lcd_clear();
lcd_enable ();
diff --git a/doc/device-tree-bindings/exynos/tmu.txt b/doc/device-tree-bindings/exynos/tmu.txt
new file mode 100644
index 0000000..89d3bf0
--- /dev/null
+++ b/doc/device-tree-bindings/exynos/tmu.txt
@@ -0,0 +1,44 @@
+Exynos Thermal management Unit
+
+Required properties:
+
+ - compatible : Should be "samsung,exynos-tmu" for TMU
+ - samsung,min-temp : Minimum temperature value (25 degree celsius)
+ - Current temperature of SoC should be more than this value.
+ - samsung,max-temp : Maximum temperature value (125 degree celsius)
+ - Current temperature of SoC should be less than this value.
+ - samsung,start-warning : Temperature at which TMU starts giving warning (degree celsius)
+ - samsung,start-tripping : Temperature at which TMU shuts down the system (degree celsius)
+ - samsung,hw-tripping : Temperature at which hardware tripping should happen
+ in case TMU fails to power off (degree celsius)
+ - samsung,efuse-min-value : SOC efuse min value (Constant 40)
+ - efuse-value should be more than this value.
+ - samsung,efuse-value : SOC actual efuse value (Literal value)
+ - This is the data trimming info.
+ - This value is used to calculate measuring error.
+ - samsung,efuse-max-value : SoC max efuse value (Constant 100)
+ - efuse-value should be less than this value.
+ - samsung,slope : Default value 274761730 (Constant 0x1060_8802).
+ - This is the default value for TMU_CONTROL register.
+ - It sets the gain of amplifier to the positive-tc generator block.
+ - It selects thermal tripping mode and enables thermal tripping.
+ - samsung,dc-value : Measured data calibration value (Constant 25)
+ - Used for tempearture calculation.
+ - This is 25 because temperature measured is always above 25 degrees.
+
+
+Example:
+
+tmu@10060000 {
+ compatible = "samsung,exynos-tmu"
+ samsung,min-temp = <25>;
+ samsung,max-temp = <125>;
+ samsung,start-warning = <95>;
+ samsung,start-tripping = <105>;
+ samsung,hw-tripping = <110>;
+ samsung,efuse-min-value = <40>;
+ samsung,efuse-value = <55>;
+ samsung,efuse-max-value = <100>;
+ samsung,slope = <274761730>;
+ samsung,dc-value = <25>;
+};
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 65791aa..1d6faa2 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -43,6 +43,7 @@
COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
COBJS-$(CONFIG_SDHCI) += sdhci.o
+COBJS-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o
COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c
new file mode 100644
index 0000000..b0afc3c
--- /dev/null
+++ b/drivers/mmc/bcm2835_sdhci.c
@@ -0,0 +1,189 @@
+/*
+ * This code was extracted from:
+ * git://github.com/gonzoua/u-boot-pi.git master
+ * and hence presumably (C) 2012 Oleksandr Tymoshenko
+ *
+ * Tweaks for U-Boot upstreaming
+ * (C) 2012 Stephen Warren
+ *
+ * Portions (e.g. read/write macros, concepts for back-to-back register write
+ * timing workarounds) obviously extracted from the Linux kernel at:
+ * https://github.com/raspberrypi/linux.git rpi-3.6.y
+ *
+ * The Linux kernel code has the following (c) and license, which is hence
+ * propagated to Oleksandr's tree and here:
+ *
+ * Support for SDHCI device on 2835
+ * Based on sdhci-bcm2708.c (c) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * SDHCI platform device - Arasan SD controller in BCM2708
+ *
+ * Inspired by sdhci-pci.c, by Pierre Ossman
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+/* 400KHz is max freq for card ID etc. Use that as min */
+#define MIN_FREQ 400000
+
+struct bcm2835_sdhci_host {
+ struct sdhci_host host;
+ uint twoticks_delay;
+ ulong last_write;
+};
+
+static inline struct bcm2835_sdhci_host *to_bcm(struct sdhci_host *host)
+{
+ return (struct bcm2835_sdhci_host *)host;
+}
+
+static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val,
+ int reg)
+{
+ struct bcm2835_sdhci_host *bcm_host = to_bcm(host);
+
+ /*
+ * The Arasan has a bugette whereby it may lose the content of
+ * successive writes to registers that are within two SD-card clock
+ * cycles of each other (a clock domain crossing problem).
+ * It seems, however, that the data register does not have this problem.
+ * (Which is just as well - otherwise we'd have to nobble the DMA engine
+ * too)
+ */
+ while (get_timer(bcm_host->last_write) < bcm_host->twoticks_delay)
+ ;
+
+ writel(val, host->ioaddr + reg);
+ bcm_host->last_write = get_timer(0);
+}
+
+static inline u32 bcm2835_sdhci_raw_readl(struct sdhci_host *host, int reg)
+{
+ return readl(host->ioaddr + reg);
+}
+
+static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
+{
+ bcm2835_sdhci_raw_writel(host, val, reg);
+}
+
+static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
+{
+ static u32 shadow;
+ u32 oldval = (reg == SDHCI_COMMAND) ? shadow :
+ bcm2835_sdhci_raw_readl(host, reg & ~3);
+ u32 word_num = (reg >> 1) & 1;
+ u32 word_shift = word_num * 16;
+ u32 mask = 0xffff << word_shift;
+ u32 newval = (oldval & ~mask) | (val << word_shift);
+
+ if (reg == SDHCI_TRANSFER_MODE)
+ shadow = newval;
+ else
+ bcm2835_sdhci_raw_writel(host, newval, reg & ~3);
+}
+
+static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+ u32 oldval = bcm2835_sdhci_raw_readl(host, reg & ~3);
+ u32 byte_num = reg & 3;
+ u32 byte_shift = byte_num * 8;
+ u32 mask = 0xff << byte_shift;
+ u32 newval = (oldval & ~mask) | (val << byte_shift);
+
+ bcm2835_sdhci_raw_writel(host, newval, reg & ~3);
+}
+
+static u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
+{
+ u32 val = bcm2835_sdhci_raw_readl(host, reg);
+
+ return val;
+}
+
+static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
+{
+ u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3));
+ u32 word_num = (reg >> 1) & 1;
+ u32 word_shift = word_num * 16;
+ u32 word = (val >> word_shift) & 0xffff;
+
+ return word;
+}
+
+static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
+{
+ u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3));
+ u32 byte_num = reg & 3;
+ u32 byte_shift = byte_num * 8;
+ u32 byte = (val >> byte_shift) & 0xff;
+
+ return byte;
+}
+
+static const struct sdhci_ops bcm2835_ops = {
+ .write_l = bcm2835_sdhci_writel,
+ .write_w = bcm2835_sdhci_writew,
+ .write_b = bcm2835_sdhci_writeb,
+ .read_l = bcm2835_sdhci_readl,
+ .read_w = bcm2835_sdhci_readw,
+ .read_b = bcm2835_sdhci_readb,
+};
+
+int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq)
+{
+ struct bcm2835_sdhci_host *bcm_host;
+ struct sdhci_host *host;
+
+ bcm_host = malloc(sizeof(*bcm_host));
+ if (!bcm_host) {
+ printf("sdhci_host malloc fail!\n");
+ return 1;
+ }
+
+ /*
+ * See the comments in bcm2835_sdhci_raw_writel().
+ *
+ * This should probably be dynamically calculated based on the actual
+ * frequency. However, this is the longest we'll have to wait, and
+ * doesn't seem to slow access down too much, so the added complexity
+ * doesn't seem worth it for now.
+ *
+ * 1/MIN_FREQ is (max) time per tick of eMMC clock.
+ * 2/MIN_FREQ is time for two ticks.
+ * Multiply by 1000000 to get uS per two ticks.
+ * +1 for hack rounding.
+ */
+ bcm_host->twoticks_delay = ((2 * 1000000) / MIN_FREQ) + 1;
+ bcm_host->last_write = 0;
+
+ host = &bcm_host->host;
+ host->name = "bcm2835_sdhci";
+ host->ioaddr = (void *)regbase;
+ host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B |
+ SDHCI_QUIRK_WAIT_SEND_CMD;
+ host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+ host->ops = &bcm2835_ops;
+
+ host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+ add_sdhci(host, emmc_freq, MIN_FREQ);
+
+ return 0;
+}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 7b5fdd9..d732581 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -51,8 +51,12 @@
wp = board_mmc_getwp(mmc);
- if ((wp < 0) && mmc->getwp)
- wp = mmc->getwp(mmc);
+ if (wp < 0) {
+ if (mmc->getwp)
+ wp = mmc->getwp(mmc);
+ else
+ wp = 0;
+ }
return wp;
}
@@ -692,8 +696,12 @@
cd = board_mmc_getcd(mmc);
- if ((cd < 0) && mmc->getcd)
- cd = mmc->getcd(mmc);
+ if (cd < 0) {
+ if (mmc->getcd)
+ cd = mmc->getcd(mmc);
+ else
+ cd = 1;
+ }
return cd;
}
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 67cfcc2..166744c 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -593,8 +593,6 @@
mmc->send_cmd = mmc_send_cmd;
mmc->set_ios = mmc_set_ios;
mmc->init = mmc_init_setup;
- mmc->getcd = omap_mmc_getcd;
- mmc->getwp = omap_mmc_getwp;
mmc->priv = priv_data;
switch (dev_index) {
@@ -616,7 +614,13 @@
return 1;
}
priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd");
+ if (priv_data->cd_gpio != -1)
+ mmc->getcd = omap_mmc_getcd;
+
priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp");
+ if (priv_data->wp_gpio != -1)
+ mmc->getwp = omap_mmc_getwp;
+
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
MMC_MODE_HC) & ~host_caps_mask;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index daca0ea..1eaea04 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -412,9 +412,11 @@
status = sdhci_readl(host, SDHCI_PRESENT_STATE);
}
- /* Eable all state */
- sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_ENABLE);
- sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_SIGNAL_ENABLE);
+ /* Enable only interrupts served by the SD controller */
+ sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK
+ , SDHCI_INT_ENABLE);
+ /* Mask all sdhci interrupt sources */
+ sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
return 0;
}
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index cee394e..bbf5443 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -25,6 +25,7 @@
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/mem.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/omap_gpmc.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/compiler.h>
diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
index 05dc644..2716209 100644
--- a/drivers/mtd/spi/winbond.c
+++ b/drivers/mtd/spi/winbond.c
@@ -68,6 +68,11 @@
.name = "W25Q80",
},
{
+ .id = 0x6016,
+ .nr_blocks = 512,
+ .name = "W25Q32DW",
+ },
+ {
.id = 0x6017,
.nr_blocks = 128,
.name = "W25Q64DW",
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index 93f8417..7a36850 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -24,6 +24,7 @@
#include <asm/errno.h>
#include <asm/io.h>
#include <phy.h>
+#include <asm/arch/cpu.h>
#define BITMASK(bits) (BIT(bits) - 1)
#define PHY_REG_MASK 0x1f
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 8c71901..1dac16a 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -25,6 +25,7 @@
LIB := $(obj)libpower.o
+COBJS-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
COBJS-$(CONFIG_FTPMU010_POWER) += ftpmu010.o
COBJS-$(CONFIG_TPS6586X_POWER) += tps6586x.o
COBJS-$(CONFIG_TWL4030_POWER) += twl4030.o
diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c
new file mode 100644
index 0000000..d4b3e65
--- /dev/null
+++ b/drivers/power/exynos-tmu.c
@@ -0,0 +1,319 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Akshay Saraswat <akshay.s@samsung.com>
+ *
+ * EXYNOS - Thermal Management Unit
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <tmu.h>
+#include <asm/arch/tmu.h>
+#include <asm/arch/power.h>
+
+#define TRIMINFO_RELOAD 1
+#define CORE_EN 1
+#define THERM_TRIP_EN (1 << 12)
+
+#define INTEN_RISE0 1
+#define INTEN_RISE1 (1 << 4)
+#define INTEN_RISE2 (1 << 8)
+#define INTEN_FALL0 (1 << 16)
+#define INTEN_FALL1 (1 << 20)
+#define INTEN_FALL2 (1 << 24)
+
+#define TRIM_INFO_MASK 0xff
+
+#define INTCLEAR_RISE0 1
+#define INTCLEAR_RISE1 (1 << 4)
+#define INTCLEAR_RISE2 (1 << 8)
+#define INTCLEAR_FALL0 (1 << 16)
+#define INTCLEAR_FALL1 (1 << 20)
+#define INTCLEAR_FALL2 (1 << 24)
+#define INTCLEARALL (INTCLEAR_RISE0 | INTCLEAR_RISE1 | \
+ INTCLEAR_RISE2 | INTCLEAR_FALL0 | \
+ INTCLEAR_FALL1 | INTCLEAR_FALL2)
+
+/* Tmeperature threshold values for various thermal events */
+struct temperature_params {
+ /* minimum value in temperature code range */
+ unsigned int min_val;
+ /* maximum value in temperature code range */
+ unsigned int max_val;
+ /* temperature threshold to start warning */
+ unsigned int start_warning;
+ /* temperature threshold CPU tripping */
+ unsigned int start_tripping;
+ /* temperature threshold for HW tripping */
+ unsigned int hardware_tripping;
+};
+
+/* Pre-defined values and thresholds for calibration of current temperature */
+struct tmu_data {
+ /* pre-defined temperature thresholds */
+ struct temperature_params ts;
+ /* pre-defined efuse range minimum value */
+ unsigned int efuse_min_value;
+ /* pre-defined efuse value for temperature calibration */
+ unsigned int efuse_value;
+ /* pre-defined efuse range maximum value */
+ unsigned int efuse_max_value;
+ /* current temperature sensing slope */
+ unsigned int slope;
+};
+
+/* TMU device specific details and status */
+struct tmu_info {
+ /* base Address for the TMU */
+ unsigned tmu_base;
+ /* pre-defined values for calibration and thresholds */
+ struct tmu_data data;
+ /* value required for triminfo_25 calibration */
+ unsigned int te1;
+ /* value required for triminfo_85 calibration */
+ unsigned int te2;
+ /* Value for measured data calibration */
+ int dc_value;
+ /* enum value indicating status of the TMU */
+ int tmu_state;
+};
+
+/* Global struct tmu_info variable to store init values */
+static struct tmu_info gbl_info;
+
+/*
+ * Get current temperature code from register,
+ * then calculate and calibrate it's value
+ * in degree celsius.
+ *
+ * @return current temperature of the chip as sensed by TMU
+ */
+static int get_cur_temp(struct tmu_info *info)
+{
+ int cur_temp;
+ struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+
+ /*
+ * Temperature code range between min 25 and max 125.
+ * May run more than once for first call as initial sensing
+ * has not yet happened.
+ */
+ do {
+ cur_temp = readl(®->current_temp) & 0xff;
+ } while (cur_temp == 0 && info->tmu_state == TMU_STATUS_NORMAL);
+
+ /* Calibrate current temperature */
+ cur_temp = cur_temp - info->te1 + info->dc_value;
+
+ return cur_temp;
+}
+
+/*
+ * Monitors status of the TMU device and exynos temperature
+ *
+ * @param temp pointer to the current temperature value
+ * @return enum tmu_status_t value, code indicating event to execute
+ */
+enum tmu_status_t tmu_monitor(int *temp)
+{
+ int cur_temp;
+ struct tmu_data *data = &gbl_info.data;
+
+ if (gbl_info.tmu_state == TMU_STATUS_INIT)
+ return TMU_STATUS_INIT;
+
+ /* Read current temperature of the SOC */
+ cur_temp = get_cur_temp(&gbl_info);
+ *temp = cur_temp;
+
+ /* Temperature code lies between min 25 and max 125 */
+ if (cur_temp >= data->ts.start_tripping &&
+ cur_temp <= data->ts.max_val) {
+ return TMU_STATUS_TRIPPED;
+ } else if (cur_temp >= data->ts.start_warning) {
+ return TMU_STATUS_WARNING;
+ } else if (cur_temp < data->ts.start_warning &&
+ cur_temp >= data->ts.min_val) {
+ return TMU_STATUS_NORMAL;
+ } else {
+ /* Temperature code does not lie between min 25 and max 125 */
+ gbl_info.tmu_state = TMU_STATUS_INIT;
+ debug("EXYNOS_TMU: Thermal reading failed\n");
+ return TMU_STATUS_INIT;
+ }
+}
+
+/*
+ * Get TMU specific pre-defined values from FDT
+ *
+ * @param info pointer to the tmu_info struct
+ * @param blob FDT blob
+ * @return int value, 0 for success
+ */
+static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
+{
+#ifdef CONFIG_OF_CONTROL
+ int node;
+ int error = 0;
+
+ /* Get the node from FDT for TMU */
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_SAMSUNG_EXYNOS_TMU);
+ if (node < 0) {
+ debug("EXYNOS_TMU: No node for tmu in device tree\n");
+ return -1;
+ }
+
+ /*
+ * Get the pre-defined TMU specific values from FDT.
+ * All of these are expected to be correct otherwise
+ * miscalculation of register values in tmu_setup_parameters
+ * may result in misleading current temperature.
+ */
+ info->tmu_base = fdtdec_get_addr(blob, node, "reg");
+ if (info->tmu_base == FDT_ADDR_T_NONE) {
+ debug("%s: Missing tmu-base\n", __func__);
+ return -1;
+ }
+ info->data.ts.min_val = fdtdec_get_int(blob,
+ node, "samsung,min-temp", -1);
+ error |= info->data.ts.min_val;
+ info->data.ts.max_val = fdtdec_get_int(blob,
+ node, "samsung,max-temp", -1);
+ error |= info->data.ts.max_val;
+ info->data.ts.start_warning = fdtdec_get_int(blob,
+ node, "samsung,start-warning", -1);
+ error |= info->data.ts.start_warning;
+ info->data.ts.start_tripping = fdtdec_get_int(blob,
+ node, "samsung,start-tripping", -1);
+ error |= info->data.ts.start_tripping;
+ info->data.ts.hardware_tripping = fdtdec_get_int(blob,
+ node, "samsung,hw-tripping", -1);
+ error |= info->data.ts.hardware_tripping;
+ info->data.efuse_min_value = fdtdec_get_int(blob,
+ node, "samsung,efuse-min-value", -1);
+ error |= info->data.efuse_min_value;
+ info->data.efuse_value = fdtdec_get_int(blob,
+ node, "samsung,efuse-value", -1);
+ error |= info->data.efuse_value;
+ info->data.efuse_max_value = fdtdec_get_int(blob,
+ node, "samsung,efuse-max-value", -1);
+ error |= info->data.efuse_max_value;
+ info->data.slope = fdtdec_get_int(blob,
+ node, "samsung,slope", -1);
+ error |= info->data.slope;
+ info->dc_value = fdtdec_get_int(blob,
+ node, "samsung,dc-value", -1);
+ error |= info->dc_value;
+
+ if (error == -1) {
+ debug("fail to get tmu node properties\n");
+ return -1;
+ }
+#endif
+
+ return 0;
+}
+
+/*
+ * Calibrate and calculate threshold values and
+ * enable interrupt levels
+ *
+ * @param info pointer to the tmu_info struct
+ */
+static void tmu_setup_parameters(struct tmu_info *info)
+{
+ unsigned int te_code, con;
+ unsigned int warning_code, trip_code, hwtrip_code;
+ unsigned int cooling_temp;
+ unsigned int rising_value;
+ struct tmu_data *data = &info->data;
+ struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+
+ /* Must reload for reading efuse value from triminfo register */
+ writel(TRIMINFO_RELOAD, ®->triminfo_control);
+
+ /* Get the compensation parameter */
+ te_code = readl(®->triminfo);
+ info->te1 = te_code & TRIM_INFO_MASK;
+ info->te2 = ((te_code >> 8) & TRIM_INFO_MASK);
+
+ if ((data->efuse_min_value > info->te1) ||
+ (info->te1 > data->efuse_max_value)
+ || (info->te2 != 0))
+ info->te1 = data->efuse_value;
+
+ /* Get RISING & FALLING Threshold value */
+ warning_code = data->ts.start_warning
+ + info->te1 - info->dc_value;
+ trip_code = data->ts.start_tripping
+ + info->te1 - info->dc_value;
+ hwtrip_code = data->ts.hardware_tripping
+ + info->te1 - info->dc_value;
+
+ cooling_temp = 0;
+
+ rising_value = ((warning_code << 8) |
+ (trip_code << 16) |
+ (hwtrip_code << 24));
+
+ /* Set interrupt level */
+ writel(rising_value, ®->threshold_temp_rise);
+ writel(cooling_temp, ®->threshold_temp_fall);
+
+ /*
+ * Init TMU control tuning parameters
+ * [28:24] VREF - Voltage reference
+ * [15:13] THERM_TRIP_MODE - Tripping mode
+ * [12] THERM_TRIP_EN - Thermal tripping enable
+ * [11:8] BUF_SLOPE_SEL - Gain of amplifier
+ * [6] THERM_TRIP_BY_TQ_EN - Tripping by TQ pin
+ */
+ writel(data->slope, ®->tmu_control);
+
+ writel(INTCLEARALL, ®->intclear);
+
+ /* TMU core enable */
+ con = readl(®->tmu_control);
+ con |= THERM_TRIP_EN | CORE_EN;
+
+ writel(con, ®->tmu_control);
+
+ /* Enable HW thermal trip */
+ set_hw_thermal_trip();
+
+ /* LEV1 LEV2 interrupt enable */
+ writel(INTEN_RISE1 | INTEN_RISE2, ®->inten);
+}
+
+/*
+ * Initialize TMU device
+ *
+ * @param blob FDT blob
+ * @return int value, 0 for success
+ */
+int tmu_init(const void *blob)
+{
+ gbl_info.tmu_state = TMU_STATUS_INIT;
+ if (get_tmu_fdt_values(&gbl_info, blob) < 0)
+ goto ret;
+
+ tmu_setup_parameters(&gbl_info);
+ gbl_info.tmu_state = TMU_STATUS_NORMAL;
+ret:
+
+ return gbl_info.tmu_state;
+}
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index b2da8b3..ed4e6b3 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -43,7 +43,7 @@
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
- defined(CONFIG_AM33XX)
+ defined(CONFIG_AM33XX) || defined(CONFIG_TI814X)
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
@@ -57,7 +57,8 @@
serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
serial_out(UART_LCRVAL, &com_port->lcr);
#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
- defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX)
+ defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
+ defined(CONFIG_TI814X)
#if defined(CONFIG_APTIX)
/* /13 mode so Aptix 6MHz can hit 115200 */
diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 8fdffb1..1987ca1 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -28,6 +28,7 @@
COBJS-$(CONFIG_SOUND) += sound.o
COBJS-$(CONFIG_I2S) += samsung-i2s.o
COBJS-$(CONFIG_SOUND_WM8994) += wm8994.o
+COBJS-$(CONFIG_SOUND_MAX98095) += max98095.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c
new file mode 100644
index 0000000..d69db58
--- /dev/null
+++ b/drivers/sound/max98095.c
@@ -0,0 +1,550 @@
+/*
+ * max98095.c -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * Modified for uboot by R. Chandrasekar (rcsekar@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <sound.h>
+#include "i2s.h"
+#include "max98095.h"
+
+enum max98095_type {
+ MAX98095,
+};
+
+struct max98095_priv {
+ enum max98095_type devtype;
+ unsigned int sysclk;
+ unsigned int rate;
+ unsigned int fmt;
+};
+
+static struct sound_codec_info g_codec_info;
+struct max98095_priv g_max98095_info;
+unsigned int g_max98095_i2c_dev_addr;
+
+/* Index 0 is reserved. */
+int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
+ 88200, 96000};
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param reg reg number to be write
+ * @param data data to be writen to the above registor
+ *
+ * @return int value 1 for change, 0 for no change or negative error code.
+ */
+static int max98095_i2c_write(unsigned int reg, unsigned char data)
+{
+ debug("%s: Write Addr : 0x%02X, Data : 0x%02X\n",
+ __func__, reg, data);
+ return i2c_write(g_max98095_i2c_dev_addr, reg, 1, &data, 1);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param reg reg number to be read
+ * @param data address of read data to be stored
+ *
+ * @return int value 0 for success, -1 in case of error.
+ */
+static unsigned int max98095_i2c_read(unsigned int reg, unsigned char *data)
+{
+ int ret;
+
+ ret = i2c_read(g_max98095_i2c_dev_addr, reg, 1, data, 1);
+ if (ret != 0) {
+ debug("%s: Error while reading register %#04x\n",
+ __func__, reg);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param reg codec register
+ * @param mask register mask
+ * @param value new value
+ *
+ * @return int value 0 for success, non-zero error code.
+ */
+static int max98095_update_bits(unsigned int reg, unsigned char mask,
+ unsigned char value)
+{
+ int change, ret = 0;
+ unsigned char old, new;
+
+ if (max98095_i2c_read(reg, &old) != 0)
+ return -1;
+ new = (old & ~mask) | (value & mask);
+ change = (old != new) ? 1 : 0;
+ if (change)
+ ret = max98095_i2c_write(reg, new);
+ if (ret < 0)
+ return ret;
+
+ return change;
+}
+
+/*
+ * codec mclk clock divider coefficients based on sampling rate
+ *
+ * @param rate sampling rate
+ * @param value address of indexvalue to be stored
+ *
+ * @return 0 for success or negative error code.
+ */
+static int rate_value(int rate, u8 *value)
+{
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
+ if (rate_table[i] >= rate) {
+ *value = i;
+ return 0;
+ }
+ }
+ *value = 1;
+
+ return -1;
+}
+
+/*
+ * Sets hw params for max98095
+ *
+ * @param max98095 max98095 information pointer
+ * @param rate Sampling rate
+ * @param bits_per_sample Bits per sample
+ *
+ * @return -1 for error and 0 Success.
+ */
+static int max98095_hw_params(struct max98095_priv *max98095,
+ unsigned int rate, unsigned int bits_per_sample)
+{
+ u8 regval;
+ int error;
+
+ switch (bits_per_sample) {
+ case 16:
+ error = max98095_update_bits(M98095_034_DAI2_FORMAT,
+ M98095_DAI_WS, 0);
+ break;
+ case 24:
+ error = max98095_update_bits(M98095_034_DAI2_FORMAT,
+ M98095_DAI_WS, M98095_DAI_WS);
+ break;
+ default:
+ debug("%s: Illegal bits per sample %d.\n",
+ __func__, bits_per_sample);
+ return -1;
+ }
+
+ if (rate_value(rate, ®val)) {
+ debug("%s: Failed to set sample rate to %d.\n",
+ __func__, rate);
+ return -1;
+ }
+ max98095->rate = rate;
+
+ error |= max98095_update_bits(M98095_031_DAI2_CLKMODE,
+ M98095_CLKMODE_MASK, regval);
+
+ /* Update sample rate mode */
+ if (rate < 50000)
+ error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
+ M98095_DAI_DHF, 0);
+ else
+ error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
+ M98095_DAI_DHF, M98095_DAI_DHF);
+
+ if (error < 0) {
+ debug("%s: Error setting hardware params.\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Configures Audio interface system clock for the given frequency
+ *
+ * @param max98095 max98095 information
+ * @param freq Sampling frequency in Hz
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_set_sysclk(struct max98095_priv *max98095,
+ unsigned int freq)
+{
+ int error = 0;
+
+ /* Requested clock frequency is already setup */
+ if (freq == max98095->sysclk)
+ return 0;
+
+ /* Setup clocks for slave mode, and using the PLL
+ * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
+ * 0x02 (when master clk is 20MHz to 40MHz)..
+ * 0x03 (when master clk is 40MHz to 60MHz)..
+ */
+ if ((freq >= 10000000) && (freq < 20000000)) {
+ error = max98095_i2c_write(M98095_026_SYS_CLK, 0x10);
+ } else if ((freq >= 20000000) && (freq < 40000000)) {
+ error = max98095_i2c_write(M98095_026_SYS_CLK, 0x20);
+ } else if ((freq >= 40000000) && (freq < 60000000)) {
+ error = max98095_i2c_write(M98095_026_SYS_CLK, 0x30);
+ } else {
+ debug("%s: Invalid master clock frequency\n", __func__);
+ return -1;
+ }
+
+ debug("%s: Clock at %uHz\n", __func__, freq);
+
+ if (error < 0)
+ return -1;
+
+ max98095->sysclk = freq;
+ return 0;
+}
+
+/*
+ * Sets Max98095 I2S format
+ *
+ * @param max98095 max98095 information
+ * @param fmt i2S format - supports a subset of the options defined
+ * in i2s.h.
+ *
+ * @return -1 for error and 0 Success.
+ */
+static int max98095_set_fmt(struct max98095_priv *max98095, int fmt)
+{
+ u8 regval = 0;
+ int error = 0;
+
+ if (fmt == max98095->fmt)
+ return 0;
+
+ max98095->fmt = fmt;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ /* Slave mode PLL */
+ error |= max98095_i2c_write(M98095_032_DAI2_CLKCFG_HI,
+ 0x80);
+ error |= max98095_i2c_write(M98095_033_DAI2_CLKCFG_LO,
+ 0x00);
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* Set to master mode */
+ regval |= M98095_DAI_MAS;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ case SND_SOC_DAIFMT_CBM_CFS:
+ default:
+ debug("%s: Clock mode unsupported\n", __func__);
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ regval |= M98095_DAI_DLY;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ break;
+ default:
+ debug("%s: Unrecognized format.\n", __func__);
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ regval |= M98095_DAI_WCI;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ regval |= M98095_DAI_BCI;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ regval |= M98095_DAI_BCI | M98095_DAI_WCI;
+ break;
+ default:
+ debug("%s: Unrecognized inversion settings.\n", __func__);
+ return -1;
+ }
+
+ error |= max98095_update_bits(M98095_034_DAI2_FORMAT,
+ M98095_DAI_MAS | M98095_DAI_DLY | M98095_DAI_BCI |
+ M98095_DAI_WCI, regval);
+
+ error |= max98095_i2c_write(M98095_035_DAI2_CLOCK,
+ M98095_DAI_BSEL64);
+
+ if (error < 0) {
+ debug("%s: Error setting i2s format.\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * resets the audio codec
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_reset(void)
+{
+ int i, ret;
+
+ /*
+ * Gracefully reset the DSP core and the codec hardware in a proper
+ * sequence.
+ */
+ ret = max98095_i2c_write(M98095_00F_HOST_CFG, 0);
+ if (ret != 0) {
+ debug("%s: Failed to reset DSP: %d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = max98095_i2c_write(M98095_097_PWR_SYS, 0);
+ if (ret != 0) {
+ debug("%s: Failed to reset codec: %d\n", __func__, ret);
+ return ret;
+ }
+
+ /*
+ * Reset to hardware default for registers, as there is not a soft
+ * reset hardware control register.
+ */
+ for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) {
+ ret = max98095_i2c_write(i, 0);
+ if (ret < 0) {
+ debug("%s: Failed to reset: %d\n", __func__, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Intialise max98095 codec device
+ *
+ * @param max98095 max98095 information
+ *
+ * @returns -1 for error and 0 Success.
+ */
+static int max98095_device_init(struct max98095_priv *max98095)
+{
+ unsigned char id;
+ int error = 0;
+
+ /* reset the codec, the DSP core, and disable all interrupts */
+ error = max98095_reset();
+ if (error != 0) {
+ debug("Reset\n");
+ return error;
+ }
+
+ /* initialize private data */
+ max98095->sysclk = -1U;
+ max98095->rate = -1U;
+ max98095->fmt = -1U;
+
+ error = max98095_i2c_read(M98095_0FF_REV_ID, &id);
+ if (error < 0) {
+ debug("%s: Failure reading hardware revision: %d\n",
+ __func__, id);
+ goto err_access;
+ }
+ debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A');
+
+ error |= max98095_i2c_write(M98095_097_PWR_SYS, M98095_PWRSV);
+
+ /*
+ * initialize registers to hardware default configuring audio
+ * interface2 to DAC
+ */
+ error |= max98095_i2c_write(M98095_048_MIX_DAC_LR,
+ M98095_DAI2M_TO_DACL|M98095_DAI2M_TO_DACR);
+
+ error |= max98095_i2c_write(M98095_092_PWR_EN_OUT,
+ M98095_SPK_SPREADSPECTRUM);
+ error |= max98095_i2c_write(M98095_045_CFG_DSP, M98095_DSPNORMAL);
+ error |= max98095_i2c_write(M98095_04E_CFG_HP, M98095_HPNORMAL);
+
+ error |= max98095_i2c_write(M98095_02C_DAI1_IOCFG,
+ M98095_S1NORMAL|M98095_SDATA);
+
+ error |= max98095_i2c_write(M98095_036_DAI2_IOCFG,
+ M98095_S2NORMAL|M98095_SDATA);
+
+ error |= max98095_i2c_write(M98095_040_DAI3_IOCFG,
+ M98095_S3NORMAL|M98095_SDATA);
+
+ /* take the codec out of the shut down */
+ error |= max98095_update_bits(M98095_097_PWR_SYS, M98095_SHDNRUN,
+ M98095_SHDNRUN);
+ /* route DACL and DACR output to HO and Spekers */
+ error |= max98095_i2c_write(M98095_050_MIX_SPK_LEFT, 0x01); /* DACL */
+ error |= max98095_i2c_write(M98095_051_MIX_SPK_RIGHT, 0x01);/* DACR */
+ error |= max98095_i2c_write(M98095_04C_MIX_HP_LEFT, 0x01); /* DACL */
+ error |= max98095_i2c_write(M98095_04D_MIX_HP_RIGHT, 0x01); /* DACR */
+
+ /* power Enable */
+ error |= max98095_i2c_write(M98095_091_PWR_EN_OUT, 0xF3);
+
+ /* set Volume */
+ error |= max98095_i2c_write(M98095_064_LVL_HP_L, 15);
+ error |= max98095_i2c_write(M98095_065_LVL_HP_R, 15);
+ error |= max98095_i2c_write(M98095_067_LVL_SPK_L, 16);
+ error |= max98095_i2c_write(M98095_068_LVL_SPK_R, 16);
+
+ /* Enable DAIs */
+ error |= max98095_i2c_write(M98095_093_BIAS_CTRL, 0x30);
+ error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x07);
+
+err_access:
+ if (error < 0)
+ return -1;
+
+ return 0;
+}
+
+static int max98095_do_init(struct sound_codec_info *pcodec_info,
+ int sampling_rate, int mclk_freq,
+ int bits_per_sample)
+{
+ int ret = 0;
+
+ /* Enable codec clock */
+ set_xclkout();
+
+ /* shift the device address by 1 for 7 bit addressing */
+ g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1;
+
+ if (pcodec_info->codec_type == CODEC_MAX_98095)
+ g_max98095_info.devtype = MAX98095;
+ else {
+ debug("%s: Codec id [%d] not defined\n", __func__,
+ pcodec_info->codec_type);
+ return -1;
+ }
+
+ ret = max98095_device_init(&g_max98095_info);
+ if (ret < 0) {
+ debug("%s: max98095 codec chip init failed\n", __func__);
+ return ret;
+ }
+
+ ret = max98095_set_sysclk(&g_max98095_info, mclk_freq);
+ if (ret < 0) {
+ debug("%s: max98095 codec set sys clock failed\n", __func__);
+ return ret;
+ }
+
+ ret = max98095_hw_params(&g_max98095_info, sampling_rate,
+ bits_per_sample);
+
+ if (ret == 0) {
+ ret = max98095_set_fmt(&g_max98095_info,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+ }
+
+ return ret;
+}
+
+static int get_max98095_codec_values(struct sound_codec_info *pcodec_info,
+ const void *blob)
+{
+ int error = 0;
+#ifdef CONFIG_OF_CONTROL
+ enum fdt_compat_id compat;
+ int node;
+ int parent;
+
+ /* Get the node from FDT for codec */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_98095_CODEC);
+ if (node <= 0) {
+ debug("EXYNOS_SOUND: No node for codec in device tree\n");
+ debug("node = %d\n", node);
+ return -1;
+ }
+
+ parent = fdt_parent_offset(blob, node);
+ if (parent < 0) {
+ debug("%s: Cannot find node parent\n", __func__);
+ return -1;
+ }
+
+ compat = fdtdec_lookup(blob, parent);
+ switch (compat) {
+ case COMPAT_SAMSUNG_S3C2440_I2C:
+ pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
+ error |= pcodec_info->i2c_bus;
+ debug("i2c bus = %d\n", pcodec_info->i2c_bus);
+ pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
+ "reg", 0);
+ error |= pcodec_info->i2c_dev_addr;
+ debug("i2c dev addr = %x\n", pcodec_info->i2c_dev_addr);
+ break;
+ default:
+ debug("%s: Unknown compat id %d\n", __func__, compat);
+ return -1;
+ }
+#else
+ pcodec_info->i2c_bus = AUDIO_I2C_BUS;
+ pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
+ debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+#endif
+ pcodec_info->codec_type = CODEC_MAX_98095;
+ if (error == -1) {
+ debug("fail to get max98095 codec node properties\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/* max98095 Device Initialisation */
+int max98095_init(const void *blob, int sampling_rate, int mclk_freq,
+ int bits_per_sample)
+{
+ int ret;
+ int old_bus = i2c_get_bus_num();
+ struct sound_codec_info *pcodec_info = &g_codec_info;
+
+ if (get_max98095_codec_values(pcodec_info, blob) < 0) {
+ debug("FDT Codec values failed\n");
+ return -1;
+ }
+
+ i2c_set_bus_num(pcodec_info->i2c_bus);
+ ret = max98095_do_init(pcodec_info, sampling_rate, mclk_freq,
+ bits_per_sample);
+ i2c_set_bus_num(old_bus);
+
+ return ret;
+}
diff --git a/drivers/sound/max98095.h b/drivers/sound/max98095.h
new file mode 100644
index 0000000..ae5eb14
--- /dev/null
+++ b/drivers/sound/max98095.h
@@ -0,0 +1,311 @@
+/*
+ * max98095.h -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MAX98095_H
+#define _MAX98095_H
+
+/*
+ * MAX98095 Registers Definition
+ */
+
+#define M98095_000_HOST_DATA 0x00
+#define M98095_001_HOST_INT_STS 0x01
+#define M98095_002_HOST_RSP_STS 0x02
+#define M98095_003_HOST_CMD_STS 0x03
+#define M98095_004_CODEC_STS 0x04
+#define M98095_005_DAI1_ALC_STS 0x05
+#define M98095_006_DAI2_ALC_STS 0x06
+#define M98095_007_JACK_AUTO_STS 0x07
+#define M98095_008_JACK_MANUAL_STS 0x08
+#define M98095_009_JACK_VBAT_STS 0x09
+#define M98095_00A_ACC_ADC_STS 0x0A
+#define M98095_00B_MIC_NG_AGC_STS 0x0B
+#define M98095_00C_SPK_L_VOLT_STS 0x0C
+#define M98095_00D_SPK_R_VOLT_STS 0x0D
+#define M98095_00E_TEMP_SENSOR_STS 0x0E
+#define M98095_00F_HOST_CFG 0x0F
+#define M98095_010_HOST_INT_CFG 0x10
+#define M98095_011_HOST_INT_EN 0x11
+#define M98095_012_CODEC_INT_EN 0x12
+#define M98095_013_JACK_INT_EN 0x13
+#define M98095_014_JACK_INT_EN 0x14
+#define M98095_015_DEC 0x15
+#define M98095_016_RESERVED 0x16
+#define M98095_017_RESERVED 0x17
+#define M98095_018_KEYCODE3 0x18
+#define M98095_019_KEYCODE2 0x19
+#define M98095_01A_KEYCODE1 0x1A
+#define M98095_01B_KEYCODE0 0x1B
+#define M98095_01C_OEMCODE1 0x1C
+#define M98095_01D_OEMCODE0 0x1D
+#define M98095_01E_XCFG1 0x1E
+#define M98095_01F_XCFG2 0x1F
+#define M98095_020_XCFG3 0x20
+#define M98095_021_XCFG4 0x21
+#define M98095_022_XCFG5 0x22
+#define M98095_023_XCFG6 0x23
+#define M98095_024_XGPIO 0x24
+#define M98095_025_XCLKCFG 0x25
+#define M98095_026_SYS_CLK 0x26
+#define M98095_027_DAI1_CLKMODE 0x27
+#define M98095_028_DAI1_CLKCFG_HI 0x28
+#define M98095_029_DAI1_CLKCFG_LO 0x29
+#define M98095_02A_DAI1_FORMAT 0x2A
+#define M98095_02B_DAI1_CLOCK 0x2B
+#define M98095_02C_DAI1_IOCFG 0x2C
+#define M98095_02D_DAI1_TDM 0x2D
+#define M98095_02E_DAI1_FILTERS 0x2E
+#define M98095_02F_DAI1_LVL1 0x2F
+#define M98095_030_DAI1_LVL2 0x30
+#define M98095_031_DAI2_CLKMODE 0x31
+#define M98095_032_DAI2_CLKCFG_HI 0x32
+#define M98095_033_DAI2_CLKCFG_LO 0x33
+#define M98095_034_DAI2_FORMAT 0x34
+#define M98095_035_DAI2_CLOCK 0x35
+#define M98095_036_DAI2_IOCFG 0x36
+#define M98095_037_DAI2_TDM 0x37
+#define M98095_038_DAI2_FILTERS 0x38
+#define M98095_039_DAI2_LVL1 0x39
+#define M98095_03A_DAI2_LVL2 0x3A
+#define M98095_03B_DAI3_CLKMODE 0x3B
+#define M98095_03C_DAI3_CLKCFG_HI 0x3C
+#define M98095_03D_DAI3_CLKCFG_LO 0x3D
+#define M98095_03E_DAI3_FORMAT 0x3E
+#define M98095_03F_DAI3_CLOCK 0x3F
+#define M98095_040_DAI3_IOCFG 0x40
+#define M98095_041_DAI3_TDM 0x41
+#define M98095_042_DAI3_FILTERS 0x42
+#define M98095_043_DAI3_LVL1 0x43
+#define M98095_044_DAI3_LVL2 0x44
+#define M98095_045_CFG_DSP 0x45
+#define M98095_046_DAC_CTRL1 0x46
+#define M98095_047_DAC_CTRL2 0x47
+#define M98095_048_MIX_DAC_LR 0x48
+#define M98095_049_MIX_DAC_M 0x49
+#define M98095_04A_MIX_ADC_LEFT 0x4A
+#define M98095_04B_MIX_ADC_RIGHT 0x4B
+#define M98095_04C_MIX_HP_LEFT 0x4C
+#define M98095_04D_MIX_HP_RIGHT 0x4D
+#define M98095_04E_CFG_HP 0x4E
+#define M98095_04F_MIX_RCV 0x4F
+#define M98095_050_MIX_SPK_LEFT 0x50
+#define M98095_051_MIX_SPK_RIGHT 0x51
+#define M98095_052_MIX_SPK_CFG 0x52
+#define M98095_053_MIX_LINEOUT1 0x53
+#define M98095_054_MIX_LINEOUT2 0x54
+#define M98095_055_MIX_LINEOUT_CFG 0x55
+#define M98095_056_LVL_SIDETONE_DAI12 0x56
+#define M98095_057_LVL_SIDETONE_DAI3 0x57
+#define M98095_058_LVL_DAI1_PLAY 0x58
+#define M98095_059_LVL_DAI1_EQ 0x59
+#define M98095_05A_LVL_DAI2_PLAY 0x5A
+#define M98095_05B_LVL_DAI2_EQ 0x5B
+#define M98095_05C_LVL_DAI3_PLAY 0x5C
+#define M98095_05D_LVL_ADC_L 0x5D
+#define M98095_05E_LVL_ADC_R 0x5E
+#define M98095_05F_LVL_MIC1 0x5F
+#define M98095_060_LVL_MIC2 0x60
+#define M98095_061_LVL_LINEIN 0x61
+#define M98095_062_LVL_LINEOUT1 0x62
+#define M98095_063_LVL_LINEOUT2 0x63
+#define M98095_064_LVL_HP_L 0x64
+#define M98095_065_LVL_HP_R 0x65
+#define M98095_066_LVL_RCV 0x66
+#define M98095_067_LVL_SPK_L 0x67
+#define M98095_068_LVL_SPK_R 0x68
+#define M98095_069_MICAGC_CFG 0x69
+#define M98095_06A_MICAGC_THRESH 0x6A
+#define M98095_06B_SPK_NOISEGATE 0x6B
+#define M98095_06C_DAI1_ALC1_TIME 0x6C
+#define M98095_06D_DAI1_ALC1_COMP 0x6D
+#define M98095_06E_DAI1_ALC1_EXPN 0x6E
+#define M98095_06F_DAI1_ALC1_GAIN 0x6F
+#define M98095_070_DAI1_ALC2_TIME 0x70
+#define M98095_071_DAI1_ALC2_COMP 0x71
+#define M98095_072_DAI1_ALC2_EXPN 0x72
+#define M98095_073_DAI1_ALC2_GAIN 0x73
+#define M98095_074_DAI1_ALC3_TIME 0x74
+#define M98095_075_DAI1_ALC3_COMP 0x75
+#define M98095_076_DAI1_ALC3_EXPN 0x76
+#define M98095_077_DAI1_ALC3_GAIN 0x77
+#define M98095_078_DAI2_ALC1_TIME 0x78
+#define M98095_079_DAI2_ALC1_COMP 0x79
+#define M98095_07A_DAI2_ALC1_EXPN 0x7A
+#define M98095_07B_DAI2_ALC1_GAIN 0x7B
+#define M98095_07C_DAI2_ALC2_TIME 0x7C
+#define M98095_07D_DAI2_ALC2_COMP 0x7D
+#define M98095_07E_DAI2_ALC2_EXPN 0x7E
+#define M98095_07F_DAI2_ALC2_GAIN 0x7F
+#define M98095_080_DAI2_ALC3_TIME 0x80
+#define M98095_081_DAI2_ALC3_COMP 0x81
+#define M98095_082_DAI2_ALC3_EXPN 0x82
+#define M98095_083_DAI2_ALC3_GAIN 0x83
+#define M98095_084_HP_NOISE_GATE 0x84
+#define M98095_085_AUX_ADC 0x85
+#define M98095_086_CFG_LINE 0x86
+#define M98095_087_CFG_MIC 0x87
+#define M98095_088_CFG_LEVEL 0x88
+#define M98095_089_JACK_DET_AUTO 0x89
+#define M98095_08A_JACK_DET_MANUAL 0x8A
+#define M98095_08B_JACK_KEYSCAN_DBC 0x8B
+#define M98095_08C_JACK_KEYSCAN_DLY 0x8C
+#define M98095_08D_JACK_KEY_THRESH 0x8D
+#define M98095_08E_JACK_DC_SLEW 0x8E
+#define M98095_08F_JACK_TEST_CFG 0x8F
+#define M98095_090_PWR_EN_IN 0x90
+#define M98095_091_PWR_EN_OUT 0x91
+#define M98095_092_PWR_EN_OUT 0x92
+#define M98095_093_BIAS_CTRL 0x93
+#define M98095_094_PWR_DAC_21 0x94
+#define M98095_095_PWR_DAC_03 0x95
+#define M98095_096_PWR_DAC_CK 0x96
+#define M98095_097_PWR_SYS 0x97
+
+#define M98095_0FF_REV_ID 0xFF
+
+#define M98095_REG_CNT (0xFF+1)
+#define M98095_REG_MAX_CACHED 0X97
+
+/* MAX98095 Registers Bit Fields */
+
+/* M98095_00F_HOST_CFG */
+#define M98095_SEG (1<<0)
+#define M98095_XTEN (1<<1)
+#define M98095_MDLLEN (1<<2)
+
+/* M98095_027_DAI1_CLKMODE, M98095_031_DAI2_CLKMODE, M98095_03B_DAI3_CLKMODE */
+#define M98095_CLKMODE_MASK 0xFF
+
+/* M98095_02A_DAI1_FORMAT, M98095_034_DAI2_FORMAT, M98095_03E_DAI3_FORMAT */
+#define M98095_DAI_MAS (1<<7)
+#define M98095_DAI_WCI (1<<6)
+#define M98095_DAI_BCI (1<<5)
+#define M98095_DAI_DLY (1<<4)
+#define M98095_DAI_TDM (1<<2)
+#define M98095_DAI_FSW (1<<1)
+#define M98095_DAI_WS (1<<0)
+
+/* M98095_02B_DAI1_CLOCK, M98095_035_DAI2_CLOCK, M98095_03F_DAI3_CLOCK */
+#define M98095_DAI_BSEL64 (1<<0)
+#define M98095_DAI_DOSR_DIV2 (0<<5)
+#define M98095_DAI_DOSR_DIV4 (1<<5)
+
+/* M98095_02C_DAI1_IOCFG, M98095_036_DAI2_IOCFG, M98095_040_DAI3_IOCFG */
+#define M98095_S1NORMAL (1<<6)
+#define M98095_S2NORMAL (2<<6)
+#define M98095_S3NORMAL (3<<6)
+#define M98095_SDATA (3<<0)
+
+/* M98095_02E_DAI1_FILTERS, M98095_038_DAI2_FILTERS, M98095_042_DAI3_FILTERS */
+#define M98095_DAI_DHF (1<<3)
+
+/* M98095_045_DSP_CFG */
+#define M98095_DSPNORMAL (5<<4)
+
+/* M98095_048_MIX_DAC_LR */
+#define M98095_DAI1L_TO_DACR (1<<7)
+#define M98095_DAI1R_TO_DACR (1<<6)
+#define M98095_DAI2M_TO_DACR (1<<5)
+#define M98095_DAI1L_TO_DACL (1<<3)
+#define M98095_DAI1R_TO_DACL (1<<2)
+#define M98095_DAI2M_TO_DACL (1<<1)
+#define M98095_DAI3M_TO_DACL (1<<0)
+
+/* M98095_049_MIX_DAC_M */
+#define M98095_DAI1L_TO_DACM (1<<3)
+#define M98095_DAI1R_TO_DACM (1<<2)
+#define M98095_DAI2M_TO_DACM (1<<1)
+#define M98095_DAI3M_TO_DACM (1<<0)
+
+/* M98095_04E_MIX_HP_CFG */
+#define M98095_HPNORMAL (3<<4)
+
+/* M98095_05F_LVL_MIC1, M98095_060_LVL_MIC2 */
+#define M98095_MICPRE_MASK (3<<5)
+#define M98095_MICPRE_SHIFT 5
+
+/* M98095_064_LVL_HP_L, M98095_065_LVL_HP_R */
+#define M98095_HP_MUTE (1<<7)
+
+/* M98095_066_LVL_RCV */
+#define M98095_REC_MUTE (1<<7)
+
+/* M98095_067_LVL_SPK_L, M98095_068_LVL_SPK_R */
+#define M98095_SP_MUTE (1<<7)
+
+/* M98095_087_CFG_MIC */
+#define M98095_MICSEL_MASK (3<<0)
+#define M98095_DIGMIC_L (1<<2)
+#define M98095_DIGMIC_R (1<<3)
+#define M98095_DIGMIC2L (1<<4)
+#define M98095_DIGMIC2R (1<<5)
+
+/* M98095_088_CFG_LEVEL */
+#define M98095_VSEN (1<<6)
+#define M98095_ZDEN (1<<5)
+#define M98095_BQ2EN (1<<3)
+#define M98095_BQ1EN (1<<2)
+#define M98095_EQ2EN (1<<1)
+#define M98095_EQ1EN (1<<0)
+
+/* M98095_090_PWR_EN_IN */
+#define M98095_INEN (1<<7)
+#define M98095_MB2EN (1<<3)
+#define M98095_MB1EN (1<<2)
+#define M98095_MBEN (3<<2)
+#define M98095_ADREN (1<<1)
+#define M98095_ADLEN (1<<0)
+
+/* M98095_091_PWR_EN_OUT */
+#define M98095_HPLEN (1<<7)
+#define M98095_HPREN (1<<6)
+#define M98095_SPLEN (1<<5)
+#define M98095_SPREN (1<<4)
+#define M98095_RECEN (1<<3)
+#define M98095_DALEN (1<<1)
+#define M98095_DAREN (1<<0)
+
+/* M98095_092_PWR_EN_OUT */
+#define M98095_SPK_FIXEDSPECTRUM (0<<4)
+#define M98095_SPK_SPREADSPECTRUM (1<<4)
+
+/* M98095_097_PWR_SYS */
+#define M98095_SHDNRUN (1<<7)
+#define M98095_PERFMODE (1<<3)
+#define M98095_HPPLYBACK (1<<2)
+#define M98095_PWRSV8K (1<<1)
+#define M98095_PWRSV (1<<0)
+
+#define M98095_COEFS_PER_BAND 5
+
+/* Equalizer filter coefficients */
+#define M98095_110_DAI1_EQ_BASE 0x10
+#define M98095_142_DAI2_EQ_BASE 0x42
+
+/* Biquad filter coefficients */
+#define M98095_174_DAI1_BQ_BASE 0x74
+#define M98095_17E_DAI2_BQ_BASE 0x7E
+
+/* function prototype */
+
+/*
+ * intialise max98095 sound codec device for the given configuration
+ *
+ * @param blob FDT node for codec values
+ * @param sampling_rate Sampling rate (Hz)
+ * @param mclk_freq MCLK Frequency (Hz)
+ * @param bits_per_sample bits per Sample (must be 16 or 24)
+ *
+ * @returns -1 for error and 0 Success.
+ */
+int max98095_init(const void *blob, int sampling_rate, int mclk_freq,
+ int bits_per_sample);
+
+#endif
diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c
index fa8432d..a4bf4ad 100644
--- a/drivers/sound/sound.c
+++ b/drivers/sound/sound.c
@@ -31,6 +31,7 @@
#include <sound.h>
#include <asm/arch/sound.h>
#include "wm8994.h"
+#include "max98095.h"
/* defines */
#define SOUND_400_HZ 400
@@ -149,11 +150,15 @@
pi2s_tx->samplingrate,
(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
pi2s_tx->bitspersample, pi2s_tx->channels);
+ } else if (!strcmp(codectype, "max98095")) {
+ ret = max98095_init(blob, pi2s_tx->samplingrate,
+ (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+ pi2s_tx->bitspersample);
} else {
- debug("%s: Unknown code type %s\n", __func__,
- codectype);
+ debug("%s: Unknown codec type %s\n", __func__, codectype);
return -1;
}
+
if (ret) {
debug("%s: Codec init failed\n", __func__);
return -1;
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 4268595..d08609e 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -50,8 +50,10 @@
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
COBJS-$(CONFIG_SH_SPI) += sh_spi.o
COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o
-COBJS-$(CONFIG_TEGRA_SPI) += tegra_spi.o
-COBJS-$(CONFIG_TEGRA_SLINK) += tegra_slink.o
+COBJS-$(CONFIG_FDT_SPI) += fdt_spi.o
+COBJS-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
+COBJS-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
+COBJS-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
COBJS-$(CONFIG_XILINX_SPI) += xilinx_spi.o
COBJS := $(COBJS-y)
diff --git a/drivers/spi/fdt_spi.c b/drivers/spi/fdt_spi.c
new file mode 100644
index 0000000..58f139a
--- /dev/null
+++ b/drivers/spi/fdt_spi.c
@@ -0,0 +1,186 @@
+/*
+ * Common fdt based SPI driver front end
+ *
+ * Copyright (c) 2013 NVIDIA Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra20/tegra20_sflash.h>
+#include <asm/arch-tegra20/tegra20_slink.h>
+#include <asm/arch-tegra114/tegra114_spi.h>
+#include <spi.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct fdt_spi_driver {
+ int compat;
+ int max_ctrls;
+ int (*init)(int *node_list, int count);
+ int (*claim_bus)(struct spi_slave *slave);
+ int (*release_bus)(struct spi_slave *slave);
+ int (*cs_is_valid)(unsigned int bus, unsigned int cs);
+ struct spi_slave *(*setup_slave)(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
+ void (*free_slave)(struct spi_slave *slave);
+ void (*cs_activate)(struct spi_slave *slave);
+ void (*cs_deactivate)(struct spi_slave *slave);
+ int (*xfer)(struct spi_slave *slave, unsigned int bitlen,
+ const void *data_out, void *data_in, unsigned long flags);
+};
+
+static struct fdt_spi_driver fdt_spi_drivers[] = {
+#ifdef CONFIG_TEGRA20_SFLASH
+ {
+ .compat = COMPAT_NVIDIA_TEGRA20_SFLASH,
+ .max_ctrls = 1,
+ .init = tegra20_spi_init,
+ .claim_bus = tegra20_spi_claim_bus,
+ .cs_is_valid = tegra20_spi_cs_is_valid,
+ .setup_slave = tegra20_spi_setup_slave,
+ .free_slave = tegra20_spi_free_slave,
+ .cs_activate = tegra20_spi_cs_activate,
+ .cs_deactivate = tegra20_spi_cs_deactivate,
+ .xfer = tegra20_spi_xfer,
+ },
+#endif
+#ifdef CONFIG_TEGRA20_SLINK
+ {
+ .compat = COMPAT_NVIDIA_TEGRA20_SLINK,
+ .max_ctrls = CONFIG_TEGRA_SLINK_CTRLS,
+ .init = tegra30_spi_init,
+ .claim_bus = tegra30_spi_claim_bus,
+ .cs_is_valid = tegra30_spi_cs_is_valid,
+ .setup_slave = tegra30_spi_setup_slave,
+ .free_slave = tegra30_spi_free_slave,
+ .cs_activate = tegra30_spi_cs_activate,
+ .cs_deactivate = tegra30_spi_cs_deactivate,
+ .xfer = tegra30_spi_xfer,
+ },
+#endif
+#ifdef CONFIG_TEGRA114_SPI
+ {
+ .compat = COMPAT_NVIDIA_TEGRA114_SPI,
+ .max_ctrls = CONFIG_TEGRA114_SPI_CTRLS,
+ .init = tegra114_spi_init,
+ .claim_bus = tegra114_spi_claim_bus,
+ .cs_is_valid = tegra114_spi_cs_is_valid,
+ .setup_slave = tegra114_spi_setup_slave,
+ .free_slave = tegra114_spi_free_slave,
+ .cs_activate = tegra114_spi_cs_activate,
+ .cs_deactivate = tegra114_spi_cs_deactivate,
+ .xfer = tegra114_spi_xfer,
+ },
+#endif
+};
+
+static struct fdt_spi_driver *driver;
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ if (!driver)
+ return 0;
+ else if (!driver->cs_is_valid)
+ return 1;
+ else
+ return driver->cs_is_valid(bus, cs);
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ if (!driver || !driver->setup_slave)
+ return NULL;
+
+ return driver->setup_slave(bus, cs, max_hz, mode);
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ if (driver && driver->free_slave)
+ return driver->free_slave(slave);
+}
+
+static int spi_init_driver(struct fdt_spi_driver *driver)
+{
+ int count;
+ int node_list[driver->max_ctrls];
+
+ count = fdtdec_find_aliases_for_id(gd->fdt_blob, "spi",
+ driver->compat,
+ node_list,
+ driver->max_ctrls);
+ return driver->init(node_list, count);
+}
+
+void spi_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fdt_spi_drivers); i++) {
+ driver = &fdt_spi_drivers[i];
+ if (!spi_init_driver(driver))
+ break;
+ }
+ if (i == ARRAY_SIZE(fdt_spi_drivers))
+ driver = NULL;
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ if (!driver)
+ return 1;
+ if (!driver->claim_bus)
+ return 0;
+
+ return driver->claim_bus(slave);
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ if (driver && driver->release_bus)
+ driver->release_bus(slave);
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ if (driver && driver->cs_activate)
+ driver->cs_activate(slave);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ if (driver && driver->cs_deactivate)
+ driver->cs_deactivate(slave);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *data_out, void *data_in, unsigned long flags)
+{
+ if (!driver || !driver->xfer)
+ return -1;
+
+ return driver->xfer(slave, bitlen, data_out, data_in, flags);
+}
diff --git a/drivers/spi/tegra114_spi.c b/drivers/spi/tegra114_spi.c
new file mode 100644
index 0000000..b11a0a1
--- /dev/null
+++ b/drivers/spi/tegra114_spi.c
@@ -0,0 +1,405 @@
+/*
+ * NVIDIA Tegra SPI controller (T114 and later)
+ *
+ * Copyright (c) 2010-2013 NVIDIA Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra114/tegra114_spi.h>
+#include <spi.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* COMMAND1 */
+#define SPI_CMD1_GO (1 << 31)
+#define SPI_CMD1_M_S (1 << 30)
+#define SPI_CMD1_MODE_MASK 0x3
+#define SPI_CMD1_MODE_SHIFT 28
+#define SPI_CMD1_CS_SEL_MASK 0x3
+#define SPI_CMD1_CS_SEL_SHIFT 26
+#define SPI_CMD1_CS_POL_INACTIVE3 (1 << 25)
+#define SPI_CMD1_CS_POL_INACTIVE2 (1 << 24)
+#define SPI_CMD1_CS_POL_INACTIVE1 (1 << 23)
+#define SPI_CMD1_CS_POL_INACTIVE0 (1 << 22)
+#define SPI_CMD1_CS_SW_HW (1 << 21)
+#define SPI_CMD1_CS_SW_VAL (1 << 20)
+#define SPI_CMD1_IDLE_SDA_MASK 0x3
+#define SPI_CMD1_IDLE_SDA_SHIFT 18
+#define SPI_CMD1_BIDIR (1 << 17)
+#define SPI_CMD1_LSBI_FE (1 << 16)
+#define SPI_CMD1_LSBY_FE (1 << 15)
+#define SPI_CMD1_BOTH_EN_BIT (1 << 14)
+#define SPI_CMD1_BOTH_EN_BYTE (1 << 13)
+#define SPI_CMD1_RX_EN (1 << 12)
+#define SPI_CMD1_TX_EN (1 << 11)
+#define SPI_CMD1_PACKED (1 << 5)
+#define SPI_CMD1_BIT_LEN_MASK 0x1F
+#define SPI_CMD1_BIT_LEN_SHIFT 0
+
+/* COMMAND2 */
+#define SPI_CMD2_TX_CLK_TAP_DELAY (1 << 6)
+#define SPI_CMD2_TX_CLK_TAP_DELAY_MASK (0x3F << 6)
+#define SPI_CMD2_RX_CLK_TAP_DELAY (1 << 0)
+#define SPI_CMD2_RX_CLK_TAP_DELAY_MASK (0x3F << 0)
+
+/* TRANSFER STATUS */
+#define SPI_XFER_STS_RDY (1 << 30)
+
+/* FIFO STATUS */
+#define SPI_FIFO_STS_CS_INACTIVE (1 << 31)
+#define SPI_FIFO_STS_FRAME_END (1 << 30)
+#define SPI_FIFO_STS_RX_FIFO_FLUSH (1 << 15)
+#define SPI_FIFO_STS_TX_FIFO_FLUSH (1 << 14)
+#define SPI_FIFO_STS_ERR (1 << 8)
+#define SPI_FIFO_STS_TX_FIFO_OVF (1 << 7)
+#define SPI_FIFO_STS_TX_FIFO_UNR (1 << 6)
+#define SPI_FIFO_STS_RX_FIFO_OVF (1 << 5)
+#define SPI_FIFO_STS_RX_FIFO_UNR (1 << 4)
+#define SPI_FIFO_STS_TX_FIFO_FULL (1 << 3)
+#define SPI_FIFO_STS_TX_FIFO_EMPTY (1 << 2)
+#define SPI_FIFO_STS_RX_FIFO_FULL (1 << 1)
+#define SPI_FIFO_STS_RX_FIFO_EMPTY (1 << 0)
+
+#define SPI_TIMEOUT 1000
+#define TEGRA_SPI_MAX_FREQ 52000000
+
+struct spi_regs {
+ u32 command1; /* 000:SPI_COMMAND1 register */
+ u32 command2; /* 004:SPI_COMMAND2 register */
+ u32 timing1; /* 008:SPI_CS_TIM1 register */
+ u32 timing2; /* 00c:SPI_CS_TIM2 register */
+ u32 xfer_status;/* 010:SPI_TRANS_STATUS register */
+ u32 fifo_status;/* 014:SPI_FIFO_STATUS register */
+ u32 tx_data; /* 018:SPI_TX_DATA register */
+ u32 rx_data; /* 01c:SPI_RX_DATA register */
+ u32 dma_ctl; /* 020:SPI_DMA_CTL register */
+ u32 dma_blk; /* 024:SPI_DMA_BLK register */
+ u32 rsvd[56]; /* 028-107 reserved */
+ u32 tx_fifo; /* 108:SPI_FIFO1 register */
+ u32 rsvd2[31]; /* 10c-187 reserved */
+ u32 rx_fifo; /* 188:SPI_FIFO2 register */
+ u32 spare_ctl; /* 18c:SPI_SPARE_CTRL register */
+};
+
+struct tegra_spi_ctrl {
+ struct spi_regs *regs;
+ unsigned int freq;
+ unsigned int mode;
+ int periph_id;
+ int valid;
+};
+
+struct tegra_spi_slave {
+ struct spi_slave slave;
+ struct tegra_spi_ctrl *ctrl;
+};
+
+static struct tegra_spi_ctrl spi_ctrls[CONFIG_TEGRA114_SPI_CTRLS];
+
+static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct tegra_spi_slave, slave);
+}
+
+int tegra114_spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ if (bus >= CONFIG_TEGRA114_SPI_CTRLS || cs > 3 || !spi_ctrls[bus].valid)
+ return 0;
+ else
+ return 1;
+}
+
+struct spi_slave *tegra114_spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct tegra_spi_slave *spi;
+
+ debug("%s: bus: %u, cs: %u, max_hz: %u, mode: %u\n", __func__,
+ bus, cs, max_hz, mode);
+
+ if (!spi_cs_is_valid(bus, cs)) {
+ printf("SPI error: unsupported bus %d / chip select %d\n",
+ bus, cs);
+ return NULL;
+ }
+
+ if (max_hz > TEGRA_SPI_MAX_FREQ) {
+ printf("SPI error: unsupported frequency %d Hz. Max frequency"
+ " is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ);
+ return NULL;
+ }
+
+ spi = malloc(sizeof(struct tegra_spi_slave));
+ if (!spi) {
+ printf("SPI error: malloc of SPI structure failed\n");
+ return NULL;
+ }
+ spi->slave.bus = bus;
+ spi->slave.cs = cs;
+ spi->ctrl = &spi_ctrls[bus];
+ if (!spi->ctrl) {
+ printf("SPI error: could not find controller for bus %d\n",
+ bus);
+ return NULL;
+ }
+
+ if (max_hz < spi->ctrl->freq) {
+ debug("%s: limiting frequency from %u to %u\n", __func__,
+ spi->ctrl->freq, max_hz);
+ spi->ctrl->freq = max_hz;
+ }
+ spi->ctrl->mode = mode;
+
+ return &spi->slave;
+}
+
+void tegra114_spi_free_slave(struct spi_slave *slave)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+
+ free(spi);
+}
+
+int tegra114_spi_init(int *node_list, int count)
+{
+ struct tegra_spi_ctrl *ctrl;
+ int i;
+ int node = 0;
+ int found = 0;
+
+ for (i = 0; i < count; i++) {
+ ctrl = &spi_ctrls[i];
+ node = node_list[i];
+
+ ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob,
+ node, "reg");
+ if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) {
+ debug("%s: no spi register found\n", __func__);
+ continue;
+ }
+ ctrl->freq = fdtdec_get_int(gd->fdt_blob, node,
+ "spi-max-frequency", 0);
+ if (!ctrl->freq) {
+ debug("%s: no spi max frequency found\n", __func__);
+ continue;
+ }
+
+ ctrl->periph_id = clock_decode_periph_id(gd->fdt_blob, node);
+ if (ctrl->periph_id == PERIPH_ID_NONE) {
+ debug("%s: could not decode periph id\n", __func__);
+ continue;
+ }
+ ctrl->valid = 1;
+ found = 1;
+
+ debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
+ __func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
+ }
+
+ return !found;
+}
+
+int tegra114_spi_claim_bus(struct spi_slave *slave)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+ struct spi_regs *regs = spi->ctrl->regs;
+
+ /* Change SPI clock to correct frequency, PLLP_OUT0 source */
+ clock_start_periph_pll(spi->ctrl->periph_id, CLOCK_ID_PERIPH,
+ spi->ctrl->freq);
+
+ /* Clear stale status here */
+ setbits_le32(®s->fifo_status,
+ SPI_FIFO_STS_ERR |
+ SPI_FIFO_STS_TX_FIFO_OVF |
+ SPI_FIFO_STS_TX_FIFO_UNR |
+ SPI_FIFO_STS_RX_FIFO_OVF |
+ SPI_FIFO_STS_RX_FIFO_UNR |
+ SPI_FIFO_STS_TX_FIFO_FULL |
+ SPI_FIFO_STS_TX_FIFO_EMPTY |
+ SPI_FIFO_STS_RX_FIFO_FULL |
+ SPI_FIFO_STS_RX_FIFO_EMPTY);
+ debug("%s: FIFO STATUS = %08x\n", __func__, readl(®s->fifo_status));
+
+ /* Set master mode and sw controlled CS */
+ setbits_le32(®s->command1, SPI_CMD1_M_S | SPI_CMD1_CS_SW_HW |
+ (spi->ctrl->mode << SPI_CMD1_MODE_SHIFT));
+ debug("%s: COMMAND1 = %08x\n", __func__, readl(®s->command1));
+
+ return 0;
+}
+
+void tegra114_spi_cs_activate(struct spi_slave *slave)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+ struct spi_regs *regs = spi->ctrl->regs;
+
+ clrbits_le32(®s->command1, SPI_CMD1_CS_SW_VAL);
+}
+
+void tegra114_spi_cs_deactivate(struct spi_slave *slave)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+ struct spi_regs *regs = spi->ctrl->regs;
+
+ setbits_le32(®s->command1, SPI_CMD1_CS_SW_VAL);
+}
+
+int tegra114_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *data_out, void *data_in, unsigned long flags)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+ struct spi_regs *regs = spi->ctrl->regs;
+ u32 reg, tmpdout, tmpdin = 0;
+ const u8 *dout = data_out;
+ u8 *din = data_in;
+ int num_bytes;
+ int ret;
+
+ debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
+ __func__, slave->bus, slave->cs, dout, din, bitlen);
+ if (bitlen % 8)
+ return -1;
+ num_bytes = bitlen / 8;
+
+ ret = 0;
+
+ /* clear all error status bits */
+ reg = readl(®s->fifo_status);
+ writel(reg, ®s->fifo_status);
+
+ /* clear ready bit */
+ setbits_le32(®s->xfer_status, SPI_XFER_STS_RDY);
+
+ clrsetbits_le32(®s->command1, SPI_CMD1_CS_SW_VAL,
+ SPI_CMD1_RX_EN | SPI_CMD1_TX_EN | SPI_CMD1_LSBY_FE |
+ (slave->cs << SPI_CMD1_CS_SEL_SHIFT));
+
+ /* set xfer size to 1 block (32 bits) */
+ writel(0, ®s->dma_blk);
+
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ /* handle data in 32-bit chunks */
+ while (num_bytes > 0) {
+ int bytes;
+ int is_read = 0;
+ int tm, i;
+
+ tmpdout = 0;
+ bytes = (num_bytes > 4) ? 4 : num_bytes;
+
+ if (dout != NULL) {
+ for (i = 0; i < bytes; ++i)
+ tmpdout = (tmpdout << 8) | dout[i];
+ dout += bytes;
+ }
+
+ num_bytes -= bytes;
+
+ clrsetbits_le32(®s->command1,
+ SPI_CMD1_BIT_LEN_MASK << SPI_CMD1_BIT_LEN_SHIFT,
+ (bytes * 8 - 1) << SPI_CMD1_BIT_LEN_SHIFT);
+ writel(tmpdout, ®s->tx_fifo);
+ setbits_le32(®s->command1, SPI_CMD1_GO);
+
+ /*
+ * Wait for SPI transmit FIFO to empty, or to time out.
+ * The RX FIFO status will be read and cleared last
+ */
+ for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
+ u32 fifo_status, xfer_status;
+
+ fifo_status = readl(®s->fifo_status);
+
+ /* We can exit when we've had both RX and TX activity */
+ if (is_read &&
+ (fifo_status & SPI_FIFO_STS_TX_FIFO_EMPTY))
+ break;
+
+ xfer_status = readl(®s->xfer_status);
+ if (!(xfer_status & SPI_XFER_STS_RDY))
+ continue;
+
+ if (fifo_status & SPI_FIFO_STS_ERR) {
+ debug("%s: got a fifo error: ", __func__);
+ if (fifo_status & SPI_FIFO_STS_TX_FIFO_OVF)
+ debug("tx FIFO overflow ");
+ if (fifo_status & SPI_FIFO_STS_TX_FIFO_UNR)
+ debug("tx FIFO underrun ");
+ if (fifo_status & SPI_FIFO_STS_RX_FIFO_OVF)
+ debug("rx FIFO overflow ");
+ if (fifo_status & SPI_FIFO_STS_RX_FIFO_UNR)
+ debug("rx FIFO underrun ");
+ if (fifo_status & SPI_FIFO_STS_TX_FIFO_FULL)
+ debug("tx FIFO full ");
+ if (fifo_status & SPI_FIFO_STS_TX_FIFO_EMPTY)
+ debug("tx FIFO empty ");
+ if (fifo_status & SPI_FIFO_STS_RX_FIFO_FULL)
+ debug("rx FIFO full ");
+ if (fifo_status & SPI_FIFO_STS_RX_FIFO_EMPTY)
+ debug("rx FIFO empty ");
+ debug("\n");
+ break;
+ }
+
+ if (!(fifo_status & SPI_FIFO_STS_RX_FIFO_EMPTY)) {
+ tmpdin = readl(®s->rx_fifo);
+ is_read = 1;
+
+ /* swap bytes read in */
+ if (din != NULL) {
+ for (i = bytes - 1; i >= 0; --i) {
+ din[i] = tmpdin & 0xff;
+ tmpdin >>= 8;
+ }
+ din += bytes;
+ }
+ }
+ }
+
+ if (tm >= SPI_TIMEOUT)
+ ret = tm;
+
+ /* clear ACK RDY, etc. bits */
+ writel(readl(®s->fifo_status), ®s->fifo_status);
+ }
+
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ debug("%s: transfer ended. Value=%08x, fifo_status = %08x\n",
+ __func__, tmpdin, readl(®s->fifo_status));
+
+ if (ret) {
+ printf("%s: timeout during SPI transfer, tm %d\n",
+ __func__, ret);
+ return -1;
+ }
+
+ return 0;
+}
diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c
new file mode 100644
index 0000000..9322ce7
--- /dev/null
+++ b/drivers/spi/tegra20_sflash.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright (c) 2010-2013 NVIDIA Corporation
+ * With help from the mpc8xxx SPI driver
+ * With more help from omap3_spi SPI driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra20/tegra20_sflash.h>
+#include <spi.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SPI_CMD_GO (1 << 30)
+#define SPI_CMD_ACTIVE_SCLK_SHIFT 26
+#define SPI_CMD_ACTIVE_SCLK_MASK (3 << SPI_CMD_ACTIVE_SCLK_SHIFT)
+#define SPI_CMD_CK_SDA (1 << 21)
+#define SPI_CMD_ACTIVE_SDA_SHIFT 18
+#define SPI_CMD_ACTIVE_SDA_MASK (3 << SPI_CMD_ACTIVE_SDA_SHIFT)
+#define SPI_CMD_CS_POL (1 << 16)
+#define SPI_CMD_TXEN (1 << 15)
+#define SPI_CMD_RXEN (1 << 14)
+#define SPI_CMD_CS_VAL (1 << 13)
+#define SPI_CMD_CS_SOFT (1 << 12)
+#define SPI_CMD_CS_DELAY (1 << 9)
+#define SPI_CMD_CS3_EN (1 << 8)
+#define SPI_CMD_CS2_EN (1 << 7)
+#define SPI_CMD_CS1_EN (1 << 6)
+#define SPI_CMD_CS0_EN (1 << 5)
+#define SPI_CMD_BIT_LENGTH (1 << 4)
+#define SPI_CMD_BIT_LENGTH_MASK 0x0000001F
+
+#define SPI_STAT_BSY (1 << 31)
+#define SPI_STAT_RDY (1 << 30)
+#define SPI_STAT_RXF_FLUSH (1 << 29)
+#define SPI_STAT_TXF_FLUSH (1 << 28)
+#define SPI_STAT_RXF_UNR (1 << 27)
+#define SPI_STAT_TXF_OVF (1 << 26)
+#define SPI_STAT_RXF_EMPTY (1 << 25)
+#define SPI_STAT_RXF_FULL (1 << 24)
+#define SPI_STAT_TXF_EMPTY (1 << 23)
+#define SPI_STAT_TXF_FULL (1 << 22)
+#define SPI_STAT_SEL_TXRX_N (1 << 16)
+#define SPI_STAT_CUR_BLKCNT (1 << 15)
+
+#define SPI_TIMEOUT 1000
+#define TEGRA_SPI_MAX_FREQ 52000000
+
+struct spi_regs {
+ u32 command; /* SPI_COMMAND_0 register */
+ u32 status; /* SPI_STATUS_0 register */
+ u32 rx_cmp; /* SPI_RX_CMP_0 register */
+ u32 dma_ctl; /* SPI_DMA_CTL_0 register */
+ u32 tx_fifo; /* SPI_TX_FIFO_0 register */
+ u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */
+ u32 rx_fifo; /* SPI_RX_FIFO_0 register */
+};
+
+struct tegra_spi_ctrl {
+ struct spi_regs *regs;
+ unsigned int freq;
+ unsigned int mode;
+ int periph_id;
+ int valid;
+};
+
+struct tegra_spi_slave {
+ struct spi_slave slave;
+ struct tegra_spi_ctrl *ctrl;
+};
+
+/* tegra20 only supports one SFLASH controller */
+static struct tegra_spi_ctrl spi_ctrls[1];
+
+static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct tegra_spi_slave, slave);
+}
+
+int tegra20_spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ /* Tegra20 SPI-Flash - only 1 device ('bus/cs') */
+ if (bus != 0 || cs != 0)
+ return 0;
+ else
+ return 1;
+}
+
+struct spi_slave *tegra20_spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct tegra_spi_slave *spi;
+
+ if (!spi_cs_is_valid(bus, cs)) {
+ printf("SPI error: unsupported bus %d / chip select %d\n",
+ bus, cs);
+ return NULL;
+ }
+
+ if (max_hz > TEGRA_SPI_MAX_FREQ) {
+ printf("SPI error: unsupported frequency %d Hz. Max frequency"
+ " is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ);
+ return NULL;
+ }
+
+ spi = spi_alloc_slave(struct tegra_spi_slave, bus, cs);
+ if (!spi) {
+ printf("SPI error: malloc of SPI structure failed\n");
+ return NULL;
+ }
+ spi->slave.bus = bus;
+ spi->slave.cs = cs;
+ spi->ctrl = &spi_ctrls[bus];
+ if (!spi->ctrl) {
+ printf("SPI error: could not find controller for bus %d\n",
+ bus);
+ return NULL;
+ }
+
+ if (max_hz < spi->ctrl->freq) {
+ debug("%s: limiting frequency from %u to %u\n", __func__,
+ spi->ctrl->freq, max_hz);
+ spi->ctrl->freq = max_hz;
+ }
+ spi->ctrl->mode = mode;
+
+ return &spi->slave;
+}
+
+void tegra20_spi_free_slave(struct spi_slave *slave)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+
+ free(spi);
+}
+
+int tegra20_spi_init(int *node_list, int count)
+{
+ struct tegra_spi_ctrl *ctrl;
+ int i;
+ int node = 0;
+ int found = 0;
+
+ for (i = 0; i < count; i++) {
+ ctrl = &spi_ctrls[i];
+ node = node_list[i];
+
+ ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob,
+ node, "reg");
+ if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) {
+ debug("%s: no slink register found\n", __func__);
+ continue;
+ }
+ ctrl->freq = fdtdec_get_int(gd->fdt_blob, node,
+ "spi-max-frequency", 0);
+ if (!ctrl->freq) {
+ debug("%s: no slink max frequency found\n", __func__);
+ continue;
+ }
+
+ ctrl->periph_id = clock_decode_periph_id(gd->fdt_blob, node);
+ if (ctrl->periph_id == PERIPH_ID_NONE) {
+ debug("%s: could not decode periph id\n", __func__);
+ continue;
+ }
+ ctrl->valid = 1;
+ found = 1;
+
+ debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
+ __func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
+ }
+ return !found;
+}
+
+int tegra20_spi_claim_bus(struct spi_slave *slave)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+ struct spi_regs *regs = spi->ctrl->regs;
+ u32 reg;
+
+ /* Change SPI clock to correct frequency, PLLP_OUT0 source */
+ clock_start_periph_pll(spi->ctrl->periph_id, CLOCK_ID_PERIPH,
+ spi->ctrl->freq);
+
+ /* Clear stale status here */
+ reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \
+ SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF;
+ writel(reg, ®s->status);
+ debug("%s: STATUS = %08x\n", __func__, readl(®s->status));
+
+ /*
+ * Use sw-controlled CS, so we can clock in data after ReadID, etc.
+ */
+ reg = (spi->ctrl->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT;
+ if (spi->ctrl->mode & 2)
+ reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT;
+ clrsetbits_le32(®s->command, SPI_CMD_ACTIVE_SCLK_MASK |
+ SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg);
+ debug("%s: COMMAND = %08x\n", __func__, readl(®s->command));
+
+ /*
+ * SPI pins on Tegra20 are muxed - change pinmux later due to UART
+ * issue.
+ */
+ pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
+ pinmux_tristate_disable(PINGRP_LSPI);
+ pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
+
+ return 0;
+}
+
+void tegra20_spi_cs_activate(struct spi_slave *slave)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+ struct spi_regs *regs = spi->ctrl->regs;
+
+ /* CS is negated on Tegra, so drive a 1 to get a 0 */
+ setbits_le32(®s->command, SPI_CMD_CS_VAL);
+}
+
+void tegra20_spi_cs_deactivate(struct spi_slave *slave)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+ struct spi_regs *regs = spi->ctrl->regs;
+
+ /* CS is negated on Tegra, so drive a 0 to get a 1 */
+ clrbits_le32(®s->command, SPI_CMD_CS_VAL);
+}
+
+int tegra20_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *data_out, void *data_in, unsigned long flags)
+{
+ struct tegra_spi_slave *spi = to_tegra_spi(slave);
+ struct spi_regs *regs = spi->ctrl->regs;
+ u32 reg, tmpdout, tmpdin = 0;
+ const u8 *dout = data_out;
+ u8 *din = data_in;
+ int num_bytes;
+ int ret;
+
+ debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+ slave->bus, slave->cs, *(u8 *)dout, *(u8 *)din, bitlen);
+ if (bitlen % 8)
+ return -1;
+ num_bytes = bitlen / 8;
+
+ ret = 0;
+
+ reg = readl(®s->status);
+ writel(reg, ®s->status); /* Clear all SPI events via R/W */
+ debug("spi_xfer entry: STATUS = %08x\n", reg);
+
+ reg = readl(®s->command);
+ reg |= SPI_CMD_TXEN | SPI_CMD_RXEN;
+ writel(reg, ®s->command);
+ debug("spi_xfer: COMMAND = %08x\n", readl(®s->command));
+
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ /* handle data in 32-bit chunks */
+ while (num_bytes > 0) {
+ int bytes;
+ int is_read = 0;
+ int tm, i;
+
+ tmpdout = 0;
+ bytes = (num_bytes > 4) ? 4 : num_bytes;
+
+ if (dout != NULL) {
+ for (i = 0; i < bytes; ++i)
+ tmpdout = (tmpdout << 8) | dout[i];
+ }
+
+ num_bytes -= bytes;
+ if (dout)
+ dout += bytes;
+
+ clrsetbits_le32(®s->command, SPI_CMD_BIT_LENGTH_MASK,
+ bytes * 8 - 1);
+ writel(tmpdout, ®s->tx_fifo);
+ setbits_le32(®s->command, SPI_CMD_GO);
+
+ /*
+ * Wait for SPI transmit FIFO to empty, or to time out.
+ * The RX FIFO status will be read and cleared last
+ */
+ for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
+ u32 status;
+
+ status = readl(®s->status);
+
+ /* We can exit when we've had both RX and TX activity */
+ if (is_read && (status & SPI_STAT_TXF_EMPTY))
+ break;
+
+ if ((status & (SPI_STAT_BSY | SPI_STAT_RDY)) !=
+ SPI_STAT_RDY)
+ tm++;
+
+ else if (!(status & SPI_STAT_RXF_EMPTY)) {
+ tmpdin = readl(®s->rx_fifo);
+ is_read = 1;
+
+ /* swap bytes read in */
+ if (din != NULL) {
+ for (i = bytes - 1; i >= 0; --i) {
+ din[i] = tmpdin & 0xff;
+ tmpdin >>= 8;
+ }
+ din += bytes;
+ }
+ }
+ }
+
+ if (tm >= SPI_TIMEOUT)
+ ret = tm;
+
+ /* clear ACK RDY, etc. bits */
+ writel(readl(®s->status), ®s->status);
+ }
+
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n",
+ tmpdin, readl(®s->status));
+
+ if (ret) {
+ printf("spi_xfer: timeout during SPI transfer, tm %d\n", ret);
+ return -1;
+ }
+
+ return 0;
+}
diff --git a/drivers/spi/tegra_slink.c b/drivers/spi/tegra20_slink.c
similarity index 72%
rename from drivers/spi/tegra_slink.c
rename to drivers/spi/tegra20_slink.c
index 9da5877..664de6e 100644
--- a/drivers/spi/tegra_slink.c
+++ b/drivers/spi/tegra20_slink.c
@@ -27,14 +27,68 @@
#include <asm/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/tegra_slink.h>
+#include <asm/arch-tegra20/tegra20_slink.h>
#include <spi.h>
#include <fdtdec.h>
DECLARE_GLOBAL_DATA_PTR;
+/* COMMAND */
+#define SLINK_CMD_ENB (1 << 31)
+#define SLINK_CMD_GO (1 << 30)
+#define SLINK_CMD_M_S (1 << 28)
+#define SLINK_CMD_CK_SDA (1 << 21)
+#define SLINK_CMD_CS_POL (1 << 13)
+#define SLINK_CMD_CS_VAL (1 << 12)
+#define SLINK_CMD_CS_SOFT (1 << 11)
+#define SLINK_CMD_BIT_LENGTH (1 << 4)
+#define SLINK_CMD_BIT_LENGTH_MASK 0x0000001F
+/* COMMAND2 */
+#define SLINK_CMD2_TXEN (1 << 30)
+#define SLINK_CMD2_RXEN (1 << 31)
+#define SLINK_CMD2_SS_EN (1 << 18)
+#define SLINK_CMD2_SS_EN_SHIFT 18
+#define SLINK_CMD2_SS_EN_MASK 0x000C0000
+#define SLINK_CMD2_CS_ACTIVE_BETWEEN (1 << 17)
+/* STATUS */
+#define SLINK_STAT_BSY (1 << 31)
+#define SLINK_STAT_RDY (1 << 30)
+#define SLINK_STAT_ERR (1 << 29)
+#define SLINK_STAT_RXF_FLUSH (1 << 27)
+#define SLINK_STAT_TXF_FLUSH (1 << 26)
+#define SLINK_STAT_RXF_OVF (1 << 25)
+#define SLINK_STAT_TXF_UNR (1 << 24)
+#define SLINK_STAT_RXF_EMPTY (1 << 23)
+#define SLINK_STAT_RXF_FULL (1 << 22)
+#define SLINK_STAT_TXF_EMPTY (1 << 21)
+#define SLINK_STAT_TXF_FULL (1 << 20)
+#define SLINK_STAT_TXF_OVF (1 << 19)
+#define SLINK_STAT_RXF_UNR (1 << 18)
+#define SLINK_STAT_CUR_BLKCNT (1 << 15)
+/* STATUS2 */
+#define SLINK_STAT2_RXF_FULL_CNT (1 << 16)
+#define SLINK_STAT2_TXF_FULL_CNT (1 << 0)
+
+#define SPI_TIMEOUT 1000
+#define TEGRA_SPI_MAX_FREQ 52000000
+
+struct spi_regs {
+ u32 command; /* SLINK_COMMAND_0 register */
+ u32 command2; /* SLINK_COMMAND2_0 reg */
+ u32 status; /* SLINK_STATUS_0 register */
+ u32 reserved; /* Reserved offset 0C */
+ u32 mas_data; /* SLINK_MAS_DATA_0 reg */
+ u32 slav_data; /* SLINK_SLAVE_DATA_0 reg */
+ u32 dma_ctl; /* SLINK_DMA_CTL_0 register */
+ u32 status2; /* SLINK_STATUS2_0 reg */
+ u32 rsvd[56]; /* 0x20 to 0xFF reserved */
+ u32 tx_fifo; /* SLINK_TX_FIFO_0 reg off 100h */
+ u32 rsvd2[31]; /* 0x104 to 0x17F reserved */
+ u32 rx_fifo; /* SLINK_RX_FIFO_0 reg off 180h */
+};
+
struct tegra_spi_ctrl {
- struct slink_tegra *regs;
+ struct spi_regs *regs;
unsigned int freq;
unsigned int mode;
int periph_id;
@@ -53,7 +107,7 @@
return container_of(slave, struct tegra_spi_slave, slave);
}
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+int tegra30_spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
if (bus >= CONFIG_TEGRA_SLINK_CTRLS || cs > 3 || !spi_ctrls[bus].valid)
return 0;
@@ -61,7 +115,7 @@
return 1;
}
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+struct spi_slave *tegra30_spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
struct tegra_spi_slave *spi;
@@ -103,32 +157,26 @@
return &spi->slave;
}
-void spi_free_slave(struct spi_slave *slave)
+void tegra30_spi_free_slave(struct spi_slave *slave)
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
free(spi);
}
-void spi_init(void)
+int tegra30_spi_init(int *node_list, int count)
{
struct tegra_spi_ctrl *ctrl;
int i;
-#ifdef CONFIG_OF_CONTROL
int node = 0;
- int count;
- int node_list[CONFIG_TEGRA_SLINK_CTRLS];
+ int found = 0;
- count = fdtdec_find_aliases_for_id(gd->fdt_blob, "spi",
- COMPAT_NVIDIA_TEGRA20_SLINK,
- node_list,
- CONFIG_TEGRA_SLINK_CTRLS);
for (i = 0; i < count; i++) {
ctrl = &spi_ctrls[i];
node = node_list[i];
- ctrl->regs = (struct slink_tegra *)fdtdec_get_addr(gd->fdt_blob,
- node, "reg");
+ ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob,
+ node, "reg");
if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) {
debug("%s: no slink register found\n", __func__);
continue;
@@ -146,44 +194,18 @@
continue;
}
ctrl->valid = 1;
+ found = 1;
debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
__func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
}
-#else
- for (i = 0; i < CONFIG_TEGRA_SLINK_CTRLS; i++) {
- ctrl = &spi_ctrls[i];
- u32 base_regs[] = {
- NV_PA_SLINK1_BASE,
- NV_PA_SLINK2_BASE,
- NV_PA_SLINK3_BASE,
- NV_PA_SLINK4_BASE,
- NV_PA_SLINK5_BASE,
- NV_PA_SLINK6_BASE,
- };
- int periph_ids[] = {
- PERIPH_ID_SBC1,
- PERIPH_ID_SBC2,
- PERIPH_ID_SBC3,
- PERIPH_ID_SBC4,
- PERIPH_ID_SBC5,
- PERIPH_ID_SBC6,
- };
- ctrl->regs = (struct slink_tegra *)base_regs[i];
- ctrl->freq = TEGRA_SPI_MAX_FREQ;
- ctrl->periph_id = periph_ids[i];
- ctrl->valid = 1;
-
- debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
- __func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
- }
-#endif
+ return !found;
}
-int spi_claim_bus(struct spi_slave *slave)
+int tegra30_spi_claim_bus(struct spi_slave *slave)
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
- struct slink_tegra *regs = spi->ctrl->regs;
+ struct spi_regs *regs = spi->ctrl->regs;
u32 reg;
/* Change SPI clock to correct frequency, PLLP_OUT0 source */
@@ -205,33 +227,29 @@
return 0;
}
-void spi_release_bus(struct spi_slave *slave)
-{
-}
-
-void spi_cs_activate(struct spi_slave *slave)
+void tegra30_spi_cs_activate(struct spi_slave *slave)
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
- struct slink_tegra *regs = spi->ctrl->regs;
+ struct spi_regs *regs = spi->ctrl->regs;
/* CS is negated on Tegra, so drive a 1 to get a 0 */
setbits_le32(®s->command, SLINK_CMD_CS_VAL);
}
-void spi_cs_deactivate(struct spi_slave *slave)
+void tegra30_spi_cs_deactivate(struct spi_slave *slave)
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
- struct slink_tegra *regs = spi->ctrl->regs;
+ struct spi_regs *regs = spi->ctrl->regs;
/* CS is negated on Tegra, so drive a 0 to get a 1 */
clrbits_le32(®s->command, SLINK_CMD_CS_VAL);
}
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+int tegra30_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *data_out, void *data_in, unsigned long flags)
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
- struct slink_tegra *regs = spi->ctrl->regs;
+ struct spi_regs *regs = spi->ctrl->regs;
u32 reg, tmpdout, tmpdin = 0;
const u8 *dout = data_out;
u8 *din = data_in;
diff --git a/drivers/spi/tegra_spi.c b/drivers/spi/tegra_spi.c
deleted file mode 100644
index 05027af..0000000
--- a/drivers/spi/tegra_spi.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * Copyright (c) 2010-2012 NVIDIA Corporation
- * With help from the mpc8xxx SPI driver
- * With more help from omap3_spi SPI driver
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/uart-spi-switch.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/tegra_spi.h>
-#include <spi.h>
-#include <fdtdec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_SPI_CORRUPTS_UART)
- #define corrupt_delay() udelay(CONFIG_SPI_CORRUPTS_UART_DLY);
-#else
- #define corrupt_delay()
-#endif
-
-struct tegra_spi_slave {
- struct spi_slave slave;
- struct spi_tegra *regs;
- unsigned int freq;
- unsigned int mode;
- int periph_id;
-};
-
-static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
-{
- return container_of(slave, struct tegra_spi_slave, slave);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- /* Tegra20 SPI-Flash - only 1 device ('bus/cs') */
- if (bus != 0 || cs != 0)
- return 0;
- else
- return 1;
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct tegra_spi_slave *spi;
-
- if (!spi_cs_is_valid(bus, cs)) {
- printf("SPI error: unsupported bus %d / chip select %d\n",
- bus, cs);
- return NULL;
- }
-
- if (max_hz > TEGRA_SPI_MAX_FREQ) {
- printf("SPI error: unsupported frequency %d Hz. Max frequency"
- " is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ);
- return NULL;
- }
-
- spi = spi_alloc_slave(struct tegra_spi_slave, bus, cs);
- if (!spi) {
- printf("SPI error: malloc of SPI structure failed\n");
- return NULL;
- }
-#ifdef CONFIG_OF_CONTROL
- int node = fdtdec_next_compatible(gd->fdt_blob, 0,
- COMPAT_NVIDIA_TEGRA20_SFLASH);
- if (node < 0) {
- debug("%s: cannot locate sflash node\n", __func__);
- return NULL;
- }
- if (!fdtdec_get_is_enabled(gd->fdt_blob, node)) {
- debug("%s: sflash is disabled\n", __func__);
- return NULL;
- }
- spi->regs = (struct spi_tegra *)fdtdec_get_addr(gd->fdt_blob,
- node, "reg");
- if ((fdt_addr_t)spi->regs == FDT_ADDR_T_NONE) {
- debug("%s: no sflash register found\n", __func__);
- return NULL;
- }
- spi->freq = fdtdec_get_int(gd->fdt_blob, node, "spi-max-frequency", 0);
- if (!spi->freq) {
- debug("%s: no sflash max frequency found\n", __func__);
- return NULL;
- }
- spi->periph_id = clock_decode_periph_id(gd->fdt_blob, node);
- if (spi->periph_id == PERIPH_ID_NONE) {
- debug("%s: could not decode periph id\n", __func__);
- return NULL;
- }
-#else
- spi->regs = (struct spi_tegra *)NV_PA_SPI_BASE;
- spi->freq = TEGRA_SPI_MAX_FREQ;
- spi->periph_id = PERIPH_ID_SPI1;
-#endif
- if (max_hz < spi->freq) {
- debug("%s: limiting frequency from %u to %u\n", __func__,
- spi->freq, max_hz);
- spi->freq = max_hz;
- }
- debug("%s: controller initialized at %p, freq = %u, periph_id = %d\n",
- __func__, spi->regs, spi->freq, spi->periph_id);
- spi->mode = mode;
-
- return &spi->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct tegra_spi_slave *spi = to_tegra_spi(slave);
-
- free(spi);
-}
-
-void spi_init(void)
-{
- /* do nothing */
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct tegra_spi_slave *spi = to_tegra_spi(slave);
- struct spi_tegra *regs = spi->regs;
- u32 reg;
-
- /* Change SPI clock to correct frequency, PLLP_OUT0 source */
- clock_start_periph_pll(spi->periph_id, CLOCK_ID_PERIPH, spi->freq);
-
- /* Clear stale status here */
- reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \
- SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF;
- writel(reg, ®s->status);
- debug("spi_init: STATUS = %08x\n", readl(®s->status));
-
- /*
- * Use sw-controlled CS, so we can clock in data after ReadID, etc.
- */
- reg = (spi->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT;
- if (spi->mode & 2)
- reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT;
- clrsetbits_le32(®s->command, SPI_CMD_ACTIVE_SCLK_MASK |
- SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg);
- debug("spi_init: COMMAND = %08x\n", readl(®s->command));
-
- /*
- * SPI pins on Tegra20 are muxed - change pinmux later due to UART
- * issue.
- */
- pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
- pinmux_tristate_disable(PINGRP_LSPI);
-
-#ifndef CONFIG_SPI_UART_SWITCH
- /*
- * NOTE:
- * Only set PinMux bits 3:2 to SPI here on boards that don't have the
- * SPI UART switch or subsequent UART data won't go out! See
- * spi_uart_switch().
- */
- /* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */
-#endif
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
- /*
- * We can't release UART_DISABLE and set pinmux to UART4 here since
- * some code (e,g, spi_flash_probe) uses printf() while the SPI
- * bus is held. That is arguably bad, but it has the advantage of
- * already being in the source tree.
- */
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- struct tegra_spi_slave *spi = to_tegra_spi(slave);
-
- pinmux_select_spi();
-
- /* CS is negated on Tegra, so drive a 1 to get a 0 */
- setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
-
- corrupt_delay(); /* Let UART settle */
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- struct tegra_spi_slave *spi = to_tegra_spi(slave);
-
- pinmux_select_uart();
-
- /* CS is negated on Tegra, so drive a 0 to get a 1 */
- clrbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
-
- corrupt_delay(); /* Let SPI settle */
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
- const void *data_out, void *data_in, unsigned long flags)
-{
- struct tegra_spi_slave *spi = to_tegra_spi(slave);
- struct spi_tegra *regs = spi->regs;
- u32 reg, tmpdout, tmpdin = 0;
- const u8 *dout = data_out;
- u8 *din = data_in;
- int num_bytes;
- int ret;
-
- debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
- slave->bus, slave->cs, *(u8 *)dout, *(u8 *)din, bitlen);
- if (bitlen % 8)
- return -1;
- num_bytes = bitlen / 8;
-
- ret = 0;
-
- reg = readl(®s->status);
- writel(reg, ®s->status); /* Clear all SPI events via R/W */
- debug("spi_xfer entry: STATUS = %08x\n", reg);
-
- reg = readl(®s->command);
- reg |= SPI_CMD_TXEN | SPI_CMD_RXEN;
- writel(reg, ®s->command);
- debug("spi_xfer: COMMAND = %08x\n", readl(®s->command));
-
- if (flags & SPI_XFER_BEGIN)
- spi_cs_activate(slave);
-
- /* handle data in 32-bit chunks */
- while (num_bytes > 0) {
- int bytes;
- int is_read = 0;
- int tm, i;
-
- tmpdout = 0;
- bytes = (num_bytes > 4) ? 4 : num_bytes;
-
- if (dout != NULL) {
- for (i = 0; i < bytes; ++i)
- tmpdout = (tmpdout << 8) | dout[i];
- }
-
- num_bytes -= bytes;
- if (dout)
- dout += bytes;
-
- clrsetbits_le32(®s->command, SPI_CMD_BIT_LENGTH_MASK,
- bytes * 8 - 1);
- writel(tmpdout, ®s->tx_fifo);
- setbits_le32(®s->command, SPI_CMD_GO);
-
- /*
- * Wait for SPI transmit FIFO to empty, or to time out.
- * The RX FIFO status will be read and cleared last
- */
- for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
- u32 status;
-
- status = readl(®s->status);
-
- /* We can exit when we've had both RX and TX activity */
- if (is_read && (status & SPI_STAT_TXF_EMPTY))
- break;
-
- if ((status & (SPI_STAT_BSY | SPI_STAT_RDY)) !=
- SPI_STAT_RDY)
- tm++;
-
- else if (!(status & SPI_STAT_RXF_EMPTY)) {
- tmpdin = readl(®s->rx_fifo);
- is_read = 1;
-
- /* swap bytes read in */
- if (din != NULL) {
- for (i = bytes - 1; i >= 0; --i) {
- din[i] = tmpdin & 0xff;
- tmpdin >>= 8;
- }
- din += bytes;
- }
- }
- }
-
- if (tm >= SPI_TIMEOUT)
- ret = tm;
-
- /* clear ACK RDY, etc. bits */
- writel(readl(®s->status), ®s->status);
- }
-
- if (flags & SPI_XFER_END)
- spi_cs_deactivate(slave);
-
- debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n",
- tmpdin, readl(®s->status));
-
- if (ret) {
- printf("spi_xfer: timeout during SPI transfer, tm %d\n", ret);
- return -1;
- }
-
- return 0;
-}
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 170a358..e8cecca 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -40,6 +40,7 @@
COBJS-$(CONFIG_LD9040) += ld9040.o
COBJS-$(CONFIG_SED156X) += sed156x.o
COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
+COBJS-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
COBJS-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
COBJS-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c
new file mode 100644
index 0000000..1e9a84a
--- /dev/null
+++ b/drivers/video/bcm2835.c
@@ -0,0 +1,127 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <lcd.h>
+#include <asm/arch/mbox.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Global variables that lcd.c expects to exist */
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+void *lcd_base;
+void *lcd_console_address;
+short console_col;
+short console_row;
+vidinfo_t panel_info;
+char lcd_cursor_enabled;
+ushort lcd_cursor_width;
+ushort lcd_cursor_height;
+
+struct msg_query {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_physical_w_h physical_w_h;
+ u32 end_tag;
+};
+
+struct msg_setup {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_physical_w_h physical_w_h;
+ struct bcm2835_mbox_tag_virtual_w_h virtual_w_h;
+ struct bcm2835_mbox_tag_depth depth;
+ struct bcm2835_mbox_tag_pixel_order pixel_order;
+ struct bcm2835_mbox_tag_alpha_mode alpha_mode;
+ struct bcm2835_mbox_tag_virtual_offset virtual_offset;
+ struct bcm2835_mbox_tag_overscan overscan;
+ struct bcm2835_mbox_tag_allocate_buffer allocate_buffer;
+ u32 end_tag;
+};
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ ALLOC_ALIGN_BUFFER(struct msg_query, msg_query, 1, 16);
+ ALLOC_ALIGN_BUFFER(struct msg_setup, msg_setup, 1, 16);
+ int ret;
+ u32 w, h;
+
+ debug("bcm2835: Query resolution...\n");
+
+ BCM2835_MBOX_INIT_HDR(msg_query);
+ BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_query->physical_w_h,
+ GET_PHYSICAL_W_H);
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_query->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query display resolution\n");
+ /* FIXME: How to disable the LCD to prevent errors? hang()? */
+ return;
+ }
+
+ w = msg_query->physical_w_h.body.resp.width;
+ h = msg_query->physical_w_h.body.resp.height;
+
+ debug("bcm2835: Setting up display for %d x %d\n", w, h);
+
+ BCM2835_MBOX_INIT_HDR(msg_setup);
+ BCM2835_MBOX_INIT_TAG(&msg_setup->physical_w_h, SET_PHYSICAL_W_H);
+ msg_setup->physical_w_h.body.req.width = w;
+ msg_setup->physical_w_h.body.req.height = h;
+ BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_w_h, SET_VIRTUAL_W_H);
+ msg_setup->virtual_w_h.body.req.width = w;
+ msg_setup->virtual_w_h.body.req.height = h;
+ BCM2835_MBOX_INIT_TAG(&msg_setup->depth, SET_DEPTH);
+ msg_setup->depth.body.req.bpp = 16;
+ BCM2835_MBOX_INIT_TAG(&msg_setup->pixel_order, SET_PIXEL_ORDER);
+ msg_setup->pixel_order.body.req.order = BCM2835_MBOX_PIXEL_ORDER_BGR;
+ BCM2835_MBOX_INIT_TAG(&msg_setup->alpha_mode, SET_ALPHA_MODE);
+ msg_setup->alpha_mode.body.req.alpha = BCM2835_MBOX_ALPHA_MODE_IGNORED;
+ BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_offset, SET_VIRTUAL_OFFSET);
+ msg_setup->virtual_offset.body.req.x = 0;
+ msg_setup->virtual_offset.body.req.y = 0;
+ BCM2835_MBOX_INIT_TAG(&msg_setup->overscan, SET_OVERSCAN);
+ msg_setup->overscan.body.req.top = 0;
+ msg_setup->overscan.body.req.bottom = 0;
+ msg_setup->overscan.body.req.left = 0;
+ msg_setup->overscan.body.req.right = 0;
+ BCM2835_MBOX_INIT_TAG(&msg_setup->allocate_buffer, ALLOCATE_BUFFER);
+ msg_setup->allocate_buffer.body.req.alignment = 0x100;
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_setup->hdr);
+ if (ret) {
+ printf("bcm2835: Could not configure display\n");
+ /* FIXME: How to disable the LCD to prevent errors? hang()? */
+ return;
+ }
+
+ w = msg_setup->physical_w_h.body.resp.width;
+ h = msg_setup->physical_w_h.body.resp.height;
+
+ debug("bcm2835: Final resolution is %d x %d\n", w, h);
+
+ panel_info.vl_col = w;
+ panel_info.vl_row = h;
+ panel_info.vl_bpix = LCD_COLOR16;
+
+ gd->fb_base = msg_setup->allocate_buffer.body.resp.fb_address;
+ lcd_base = (void *)gd->fb_base;
+}
+
+void lcd_enable(void)
+{
+}
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 9eada95..b7c443c 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -18,8 +18,7 @@
#define CONFIG_AM33XX
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
#define CONFIG_DMA_COHERENT
#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
@@ -56,13 +55,15 @@
"fdtaddr=0x80F80000\0" \
"fdt_high=0xffffffff\0" \
"rdaddr=0x81000000\0" \
- "bootfile=/boot/uImage\0" \
+ "bootdir=/boot\0" \
+ "bootfile=uImage\0" \
"fdtfile=\0" \
"console=ttyO0,115200n8\0" \
"optargs=\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
+ "bootpart=0:2\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
"nandrootfstype=ubifs rootwait=1\0" \
"nandsrcaddr=0x280000\0" \
@@ -96,19 +97,19 @@
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
"ip=dhcp\0" \
"bootenv=uEnv.txt\0" \
- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
"env import -t $loadaddr $filesize\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
- "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
- "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
+ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ "loaduimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootm ${loadaddr}\0" \
+ "bootm ${loadaddr} - ${fdtaddr}\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
"nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
@@ -122,14 +123,17 @@
"setenv autoload no; " \
"dhcp; " \
"tftp ${loadaddr} ${bootfile}; " \
+ "tftp ${fdtaddr} ${fdtfile}; " \
"run netargs; " \
- "bootm ${loadaddr}\0" \
+ "bootm ${loadaddr} - ${fdtaddr}\0" \
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
- "bootm ${loadaddr}\0" \
+ "bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
"findfdt="\
"if test $board_name = A335BONE; then " \
"setenv fdtfile am335x-bone.dtb; fi; " \
+ "if test $board_name = A335BNLT; then " \
+ "setenv fdtfile am335x-boneblack.dtb; fi; " \
"if test $board_name = A33515BB; then " \
"setenv fdtfile am335x-evm.dtb; fi; " \
"if test $board_name = A335X_SK; then " \
@@ -138,6 +142,7 @@
#endif
#define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootenv; then " \
@@ -149,6 +154,7 @@
"run uenvcmd;" \
"fi;" \
"if run loaduimage; then " \
+ "run loadfdt;" \
"run mmcboot;" \
"fi;" \
"else " \
@@ -192,6 +198,8 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FS_GENERIC
#define CONFIG_SPI
#define CONFIG_OMAP3_SPI
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index 55dc83d..6a99175 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -60,7 +60,7 @@
#define CONFIG_SYS_MMC_ENV_PART 2
/* SPI */
-#define CONFIG_TEGRA_SLINK
+#define CONFIG_TEGRA20_SLINK
#define CONFIG_TEGRA_SLINK_CTRLS 6
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_WINBOND
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 8d79ffd..726714d 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -344,5 +344,9 @@
#define LCD_BPP LCD_COLOR16
#define CONFIG_LCD
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_SPLASH_SCREEN_PREPARE
#endif /* __CONFIG_H */
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
index b1a6e34..7b68f7c 100644
--- a/include/configs/dalmore.h
+++ b/include/configs/dalmore.h
@@ -50,10 +50,31 @@
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_ENV_IS_NOWHERE
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+#define CONFIG_ENV_OFFSET ((4096 * 1024) - CONFIG_ENV_SIZE)
#define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */
+/* SPI */
+#define CONFIG_TEGRA114_SPI
+#define CONFIG_TEGRA114_SPI_CTRLS 6
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 1c624d4..2b9d6ac 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -118,6 +118,11 @@
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
+/* Thermal Management Unit */
+#define CONFIG_EXYNOS_TMU
+#define CONFIG_CMD_DTT
+#define CONFIG_TMU_CMD_DTT
+
/* USB */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
@@ -297,6 +302,7 @@
#ifdef CONFIG_CMD_SOUND
#define CONFIG_SOUND
#define CONFIG_I2S
+#define CONFIG_SOUND_MAX98095
#define CONFIG_SOUND_WM8994
#endif
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index 559e375..849fb16 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -55,7 +55,8 @@
#define CONFIG_INITRD_TAG 1
#define CONFIG_REVISION_TAG 1
-#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
/*
* NS16550 Configuration
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 63ab123..d0ea74e 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -21,8 +21,7 @@
#define CONFIG_AM33XX
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
#define CONFIG_DMA_COHERENT
#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index cf62e45..3d55d36 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -23,6 +23,7 @@
#define CONFIG_ARM1176
#define CONFIG_BCM2835
#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_DCACHE_OFF
/*
* 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
* so 2708 has historically been used rather than a dedicated 2835 ID.
@@ -50,6 +51,7 @@
#define CONFIG_SYS_MALLOC_LEN SZ_4M
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00200000
+#define CONFIG_LOADADDR 0x00200000
/* Flash */
#define CONFIG_SYS_NO_FLASH
@@ -57,6 +59,24 @@
/* Devices */
/* GPIO */
#define CONFIG_BCM2835_GPIO
+/* LCD */
+#define CONFIG_LCD
+#define LCD_BPP LCD_COLOR16
+/*
+ * Prevent allocation of RAM for FB; the real FB address is queried
+ * dynamically from the VideoCore co-processor, and comes from RAM
+ * not owned by the ARM CPU.
+ */
+#define CONFIG_FB_ADDR 0
+#define CONFIG_VIDEO_BCM2835
+#define CONFIG_SYS_WHITE_ON_BLACK
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_MMC_SDHCI_IO_ACCESSORS
+#define CONFIG_BCM2835_SDHCI
/* Console UART */
#define CONFIG_PL011_SERIAL
@@ -73,7 +93,59 @@
/* Environment */
#define CONFIG_ENV_SIZE SZ_16K
#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_SYS_LOAD_ADDR 0x1000000
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it low in memory to avoid conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "stdin=serial\0" \
+ "stderr=serial,lcd\0" \
+ "stdout=serial,lcd\0" \
+ "scriptaddr=0x00000000\0" \
+ "kernel_addr_r=0x01000000\0" \
+ "fdt_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x02100000\0" \
+ "boot_targets=mmc0\0" \
+ \
+ "script_boot=" \
+ "if fatload ${devtype} ${devnum}:1 " \
+ "${scriptaddr} boot.scr.uimg; then " \
+ "source ${scriptaddr}; " \
+ "fi;\0" \
+ \
+ "mmc_boot=" \
+ "setenv devtype mmc; " \
+ "if mmc dev ${devnum}; then " \
+ "run script_boot; " \
+ "fi\0" \
+ \
+ "bootcmd_mmc0=setenv devnum 0; run mmc_boot\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "for target in ${boot_targets}; do run bootcmd_${target}; done"
+
+#define CONFIG_BOOTDELAY 2
/* Shell */
#define CONFIG_SYS_HUSH_PARSER
@@ -88,6 +160,13 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT
/* Some things don't make sense on this HW or yet */
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_NET
diff --git a/include/configs/snow.h b/include/configs/snow.h
new file mode 100644
index 0000000..b8460fd
--- /dev/null
+++ b/include/configs/snow.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5 Snow board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_SNOW_H
+#define __CONFIG_SNOW_H
+
+#include <configs/exynos5250-dt.h>
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-snow
+
+#endif /* __CONFIG_SNOW_H */
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index f2a70b1..bf18699 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -150,6 +150,10 @@
MEM_LAYOUT_ENV_SETTINGS \
BOOTCMDS_COMMON
+#if defined(CONFIG_TEGRA20_SFLASH) || defined(CONFIG_TEGRA20_SLINK) || defined(CONFIG_TEGRA114_SPI)
+#define CONFIG_FDT_SPI
+#endif
+
/* overrides for SPL build here */
#ifdef CONFIG_SPL_BUILD
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index e464e06..395a657 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -28,6 +28,7 @@
/*
* Errata configuration
*/
+#define CONFIG_ARM_ERRATA_716044
#define CONFIG_ARM_ERRATA_742230
#define CONFIG_ARM_ERRATA_751472
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
new file mode 100644
index 0000000..16547e3
--- /dev/null
+++ b/include/configs/ti814x_evm.h
@@ -0,0 +1,221 @@
+/*
+ * ti814x_evm.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_TI814X_EVM_H
+#define __CONFIG_TI814X_EVM_H
+
+#define CONFIG_TI81XX
+#define CONFIG_TI814X
+#define CONFIG_SYS_NO_FLASH
+
+#include <asm/arch/omap.h>
+
+#define CONFIG_DMA_COHERENT
+#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
+
+#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* Use HUSH for command parsing */
+#define CONFIG_SYS_PROMPT "U-Boot# "
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_MACH_TYPE MACH_TYPE_TI8148EVM
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG /* for ramdisk support */
+
+/* commands to include */
+# include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_VERSION_VARIABLE
+
+#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x80200000\0" \
+ "fdtaddr=0x80F80000\0" \
+ "rdaddr=0x81000000\0" \
+ "bootfile=/boot/uImage\0" \
+ "fdtfile=\0" \
+ "console=ttyO0,115200n8\0" \
+ "optargs=\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 ro\0" \
+ "mmcrootfstype=ext4 rootwait\0" \
+ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
+ "ramrootfstype=ext2\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "bootenv=uEnv.txt\0" \
+ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "importbootenv=echo Importing environment from mmc ...; " \
+ "env import -t $loadaddr $filesize\0" \
+ "ramargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${ramroot} " \
+ "rootfstype=${ramrootfstype}\0" \
+ "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
+ "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "ramboot=echo Booting from ramdisk ...; " \
+ "run ramargs; " \
+ "bootm ${loadaddr}\0" \
+ "fdtfile=ti814x-evm.dtb\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run importbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run loaduimage; then " \
+ "run mmcboot;" \
+ "fi;" \
+ "fi;" \
+
+/* Clock Defines */
+#define V_OSCK 24000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#define CONFIG_CMD_ECHO
+
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START PHYS_DRAM_1
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
+ + PHYS_DRAM_1_SIZE - (8 << 12))
+
+#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */
+#define CONFIG_SYS_HZ 1000 /* 1ms clock */
+
+#define CONFIG_OMAP_GPIO
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+/**
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* 1 banks of DRAM */
+#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
+#define PHYS_DRAM_1_SIZE 0x20000000 /* 512MB */
+#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
+ GENERATED_GBL_DATA_SIZE)
+
+/**
+ * Platform/Board specific defs
+ */
+#define CONFIG_SYS_TIMERBASE 0x4802E000
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK (48000000)
+#define CONFIG_SYS_NS16550_COM1 0x48020000 /* Base EVM has UART0 */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x40300000
+#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_BOARD_INIT
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80800000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80800000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+
+/*
+ * Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
+#endif /* ! __CONFIG_TI814X_EVM_H */
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
index 0644f7a..b925314 100644
--- a/include/configs/trimslice.h
+++ b/include/configs/trimslice.h
@@ -46,7 +46,7 @@
#define CONFIG_BOARD_EARLY_INIT_F
/* SPI */
-#define CONFIG_TEGRA_SPI
+#define CONFIG_TEGRA20_SFLASH
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 3b363be..e7e3ff9 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -77,6 +77,7 @@
COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */
COMPAT_NVIDIA_TEGRA20_SFLASH, /* Tegra 2 SPI flash controller */
COMPAT_NVIDIA_TEGRA20_SLINK, /* Tegra 2 SPI SLINK controller */
+ COMPAT_NVIDIA_TEGRA114_SPI, /* Tegra 114 SPI controller */
COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */
COMPAT_SAMSUNG_EXYNOS5_SROMC, /* Exynos5 SROMC */
COMPAT_SAMSUNG_S3C2440_I2C, /* Exynos I2C Controller */
@@ -85,8 +86,10 @@
COMPAT_SAMSUNG_EXYNOS_SPI, /* Exynos SPI */
COMPAT_SAMSUNG_EXYNOS_EHCI, /* Exynos EHCI controller */
COMPAT_SAMSUNG_EXYNOS_USB_PHY, /* Exynos phy controller for usb2.0 */
+ COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */
COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */
+ COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */
COMPAT_COUNT,
};
diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h
index d949ace..fdc7ca9 100644
--- a/include/power/max77686_pmic.h
+++ b/include/power/max77686_pmic.h
@@ -155,4 +155,36 @@
EN_LDO = (0x3 << 6),
};
+/* Buck1 1 volt value */
+#define MAX77686_BUCK1OUT_1V 0x5
+#define MAX77686_BUCK1CTRL_EN (3 << 0)
+/* Buck2 1.3 volt value */
+#define MAX77686_BUCK2DVS1_1_3V 0x38
+#define MAX77686_BUCK2CTRL_ON (1 << 4)
+/* Buck3 1.0125 volt value */
+#define MAX77686_BUCK3DVS1_1_0125V 0x21
+#define MAX77686_BUCK3CTRL_ON (1 << 4)
+/* Buck4 1.2 volt value */
+#define MAX77686_BUCK4DVS1_1_2V 0x30
+#define MAX77686_BUCK4CTRL_ON (1 << 4)
+/* LDO2 1.5 volt value */
+#define MAX77686_LD02CTRL1_1_5V 0x1c
+/* LDO3 1.8 volt value */
+#define MAX77686_LD03CTRL1_1_8V 0x14
+/* LDO5 1.8 volt value */
+#define MAX77686_LD05CTRL1_1_8V 0x14
+/* LDO10 1.8 volt value */
+#define MAX77686_LD10CTRL1_1_8V 0x14
+/*
+ * MAX77686_REG_PMIC_32KHZ set to 32KH CP
+ * output is activated
+ */
+#define MAX77686_32KHCP_EN (1 << 1)
+/*
+ * MAX77686_REG_PMIC_BBAT set to
+ * Back up batery charger on and
+ * limit voltage setting to 3.5v
+ */
+#define MAX77686_BBCHOSTEN (1 << 0)
+#define MAX77686_BBCVS_3_5V (3 << 3)
#endif /* __MAX77686_PMIC_H_ */
diff --git a/include/sound.h b/include/sound.h
index d73839d..94922f6 100644
--- a/include/sound.h
+++ b/include/sound.h
@@ -28,6 +28,7 @@
enum en_sound_codec {
CODEC_WM_8994,
CODEC_WM_8995,
+ CODEC_MAX_98095,
CODEC_MAX
};
diff --git a/include/tmu.h b/include/tmu.h
new file mode 100644
index 0000000..da07a22
--- /dev/null
+++ b/include/tmu.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Akshay Saraswat <akshay.s@samsung.com>
+ *
+ * Thermal Management Unit
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TMU_H
+#define _TMU_H
+
+enum tmu_status_t {
+ TMU_STATUS_INIT = -1,
+ TMU_STATUS_NORMAL = 0,
+ TMU_STATUS_WARNING,
+ TMU_STATUS_TRIPPED,
+};
+
+/*
+ * Monitors status of the TMU device and exynos temperature
+ *
+ * @param temp pointer to the current temperature value
+ * @return enum tmu_status_t value, code indicating event to execute
+ * and -1 on error
+ */
+enum tmu_status_t tmu_monitor(int *temp);
+
+/*
+ * Initialize TMU device
+ *
+ * @param blob FDT blob
+ * @return int value, 0 for success
+ */
+int tmu_init(const void *blob);
+#endif /* _THERMAL_H_ */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index c95c2c2..e17dd00 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -50,6 +50,7 @@
COMPAT(NVIDIA_TEGRA20_SDMMC, "nvidia,tegra20-sdhci"),
COMPAT(NVIDIA_TEGRA20_SFLASH, "nvidia,tegra20-sflash"),
COMPAT(NVIDIA_TEGRA20_SLINK, "nvidia,tegra20-slink"),
+ COMPAT(NVIDIA_TEGRA114_SPI, "nvidia,tegra114-spi"),
COMPAT(SMSC_LAN9215, "smsc,lan9215"),
COMPAT(SAMSUNG_EXYNOS5_SROMC, "samsung,exynos-sromc"),
COMPAT(SAMSUNG_S3C2440_I2C, "samsung,s3c2440-i2c"),
@@ -58,8 +59,10 @@
COMPAT(SAMSUNG_EXYNOS_SPI, "samsung,exynos-spi"),
COMPAT(SAMSUNG_EXYNOS_EHCI, "samsung,exynos-ehci"),
COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"),
+ COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
COMPAT(GENERIC_SPI_FLASH, "spi-flash"),
+ COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)
diff --git a/spl/Makefile b/spl/Makefile
index 14095c8..b5a8de7 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -84,7 +84,7 @@
LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o
LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif