* Patch by Peter Ryser, 20 Feb 2004:
Add support for the Xilinx ML300 platform
* Patch by Stephan Linz, 17 Feb 2004:
Fix watchdog support for NIOS
* Patch by Josh Fryman, 16 Feb 2004:
Fix byte-swapping for cfi_flash.c for different bus widths
* Patch by Jon Diekema, 14 Jeb 2004:
Remove duplicate "FPGA Support" notes from the README file
diff --git a/board/xilinx/common/xbasic_types.c b/board/xilinx/common/xbasic_types.c
new file mode 100644
index 0000000..c3a171a
--- /dev/null
+++ b/board/xilinx/common/xbasic_types.c
@@ -0,0 +1,165 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+ *
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xbasic_types.c
+*
+* This file contains basic functions for Xilinx software IP.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a rpm 11/07/03 Added XNullHandler function as a stub interrupt handler
+* </pre>
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/**
+ * This variable allows testing to be done easier with asserts. An assert
+ * sets this variable such that a driver can evaluate this variable
+ * to determine if an assert occurred.
+ */
+unsigned int XAssertStatus;
+
+/**
+ * This variable allows the assert functionality to be changed for testing
+ * such that it does not wait infinitely. Use the debugger to disable the
+ * waiting during testing of asserts.
+ */
+u32 XWaitInAssert = TRUE;
+
+/* The callback function to be invoked when an assert is taken */
+static XAssertCallback XAssertCallbackRoutine = (XAssertCallback) NULL;
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+*
+* Implements assert. Currently, it calls a user-defined callback function
+* if one has been set. Then, it potentially enters an infinite loop depending
+* on the value of the XWaitInAssert variable.
+*
+* @param File is the name of the filename of the source
+* @param Line is the linenumber within File
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+void
+XAssert(char *File, int Line)
+{
+ /* if the callback has been set then invoke it */
+ if (XAssertCallbackRoutine != NULL) {
+ (*XAssertCallbackRoutine) (File, Line);
+ }
+
+ /* if specified, wait indefinitely such that the assert will show up
+ * in testing
+ */
+ while (XWaitInAssert) {
+ }
+}
+
+/*****************************************************************************/
+/**
+*
+* Sets up a callback function to be invoked when an assert occurs. If there
+* was already a callback installed, then it is replaced.
+*
+* @param Routine is the callback to be invoked when an assert is taken
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* This function has no effect if NDEBUG is set
+*
+******************************************************************************/
+void
+XAssertSetCallback(XAssertCallback Routine)
+{
+ XAssertCallbackRoutine = Routine;
+}
+
+/*****************************************************************************/
+/**
+*
+* Null handler function. This follows the XInterruptHandler signature for
+* interrupt handlers. It can be used to assign a null handler (a stub) to an
+* interrupt controller vector table.
+*
+* @param NullParameter is an arbitrary void pointer and not used.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+void
+XNullHandler(void *NullParameter)
+{
+}
diff --git a/board/xilinx/common/xbasic_types.h b/board/xilinx/common/xbasic_types.h
new file mode 100644
index 0000000..ef0b7c2
--- /dev/null
+++ b/board/xilinx/common/xbasic_types.h
@@ -0,0 +1,283 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xbasic_types.h
+*
+* This file contains basic types for Xilinx software IP. These types do not
+* follow the standard naming convention with respect to using the component
+* name in front of each name because they are considered to be primitives.
+*
+* @note
+*
+* This file contains items which are architecture dependent.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a rmm 12/14/01 First release
+* rmm 05/09/03 Added "xassert always" macros to rid ourselves of diab
+* compiler warnings
+* 1.00a rpm 11/07/03 Added XNullHandler function as a stub interrupt handler
+* </pre>
+*
+******************************************************************************/
+
+#ifndef XBASIC_TYPES_H /* prevent circular inclusions */
+#define XBASIC_TYPES_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+/************************** Constant Definitions *****************************/
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+/** Null */
+
+#define XCOMPONENT_IS_READY 0x11111111 /* component has been initialized */
+#define XCOMPONENT_IS_STARTED 0x22222222 /* component has been started */
+
+/* the following constants and declarations are for unit test purposes and are
+ * designed to be used in test applications.
+ */
+#define XTEST_PASSED 0
+#define XTEST_FAILED 1
+
+#define XASSERT_NONE 0
+#define XASSERT_OCCURRED 1
+
+extern unsigned int XAssertStatus;
+extern void XAssert(char *, int);
+
+/**************************** Type Definitions *******************************/
+
+/** @name Primitive types
+ * These primitive types are created for transportability.
+ * They are dependent upon the target architecture.
+ * @{
+ */
+#include <linux/types.h>
+
+typedef struct {
+ u32 Upper;
+ u32 Lower;
+} Xuint64;
+
+/*@}*/
+
+/**
+ * This data type defines an interrupt handler for a device.
+ * The argument points to the instance of the component
+ */
+typedef void (*XInterruptHandler) (void *InstancePtr);
+
+/**
+ * This data type defines a callback to be invoked when an
+ * assert occurs. The callback is invoked only when asserts are enabled
+ */
+typedef void (*XAssertCallback) (char *FilenamePtr, int LineNumber);
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************/
+/**
+* Return the most significant half of the 64 bit data type.
+*
+* @param x is the 64 bit word.
+*
+* @return
+*
+* The upper 32 bits of the 64 bit word.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+#define XUINT64_MSW(x) ((x).Upper)
+
+/*****************************************************************************/
+/**
+* Return the least significant half of the 64 bit data type.
+*
+* @param x is the 64 bit word.
+*
+* @return
+*
+* The lower 32 bits of the 64 bit word.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+#define XUINT64_LSW(x) ((x).Lower)
+
+#ifndef NDEBUG
+
+/*****************************************************************************/
+/**
+* This assert macro is to be used for functions that do not return anything
+* (void). This in conjunction with the XWaitInAssert boolean can be used to
+* accomodate tests so that asserts which fail allow execution to continue.
+*
+* @param expression is the expression to evaluate. If it evaluates to false,
+* the assert occurs.
+*
+* @return
+*
+* Returns void unless the XWaitInAssert variable is true, in which case
+* no return is made and an infinite loop is entered.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+#define XASSERT_VOID(expression) \
+{ \
+ if (expression) { \
+ XAssertStatus = XASSERT_NONE; \
+ } else { \
+ XAssert(__FILE__, __LINE__); \
+ XAssertStatus = XASSERT_OCCURRED; \
+ return; \
+ } \
+}
+
+/*****************************************************************************/
+/**
+* This assert macro is to be used for functions that do return a value. This in
+* conjunction with the XWaitInAssert boolean can be used to accomodate tests so
+* that asserts which fail allow execution to continue.
+*
+* @param expression is the expression to evaluate. If it evaluates to false,
+* the assert occurs.
+*
+* @return
+*
+* Returns 0 unless the XWaitInAssert variable is true, in which case
+* no return is made and an infinite loop is entered.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+#define XASSERT_NONVOID(expression) \
+{ \
+ if (expression) { \
+ XAssertStatus = XASSERT_NONE; \
+ } else { \
+ XAssert(__FILE__, __LINE__); \
+ XAssertStatus = XASSERT_OCCURRED; \
+ return 0; \
+ } \
+}
+
+/*****************************************************************************/
+/**
+* Always assert. This assert macro is to be used for functions that do not
+* return anything (void). Use for instances where an assert should always
+* occur.
+*
+* @return
+*
+* Returns void unless the XWaitInAssert variable is true, in which case
+* no return is made and an infinite loop is entered.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+#define XASSERT_VOID_ALWAYS() \
+{ \
+ XAssert(__FILE__, __LINE__); \
+ XAssertStatus = XASSERT_OCCURRED; \
+ return; \
+}
+
+/*****************************************************************************/
+/**
+* Always assert. This assert macro is to be used for functions that do return
+* a value. Use for instances where an assert should always occur.
+*
+* @return
+*
+* Returns void unless the XWaitInAssert variable is true, in which case
+* no return is made and an infinite loop is entered.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+#define XASSERT_NONVOID_ALWAYS() \
+{ \
+ XAssert(__FILE__, __LINE__); \
+ XAssertStatus = XASSERT_OCCURRED; \
+ return 0; \
+}
+
+#else
+
+#define XASSERT_VOID(expression)
+#define XASSERT_VOID_ALWAYS()
+#define XASSERT_NONVOID(expression)
+#define XASSERT_NONVOID_ALWAYS()
+#endif
+
+/************************** Function Prototypes ******************************/
+
+void XAssertSetCallback(XAssertCallback Routine);
+void XNullHandler(void *NullParameter);
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/common/xbuf_descriptor.h b/board/xilinx/common/xbuf_descriptor.h
new file mode 100644
index 0000000..fdd51d5
--- /dev/null
+++ b/board/xilinx/common/xbuf_descriptor.h
@@ -0,0 +1,252 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+* FILENAME:
+*
+* xbuf_descriptor.h
+*
+* DESCRIPTION:
+*
+* This file contains the interface for the XBufDescriptor component.
+* The XBufDescriptor component is a passive component that only maps over
+* a buffer descriptor data structure shared by the scatter gather DMA hardware
+* and software. The component's primary purpose is to provide encapsulation of
+* the buffer descriptor processing. See the source file xbuf_descriptor.c for
+* details.
+*
+* NOTES:
+*
+* Most of the functions of this component are implemented as macros in order
+* to optimize the processing. The names are not all uppercase such that they
+* can be switched between macros and functions easily.
+*
+******************************************************************************/
+
+#ifndef XBUF_DESCRIPTOR_H /* prevent circular inclusions */
+#define XBUF_DESCRIPTOR_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xdma_channel_i.h"
+
+/************************** Constant Definitions *****************************/
+
+/* The following constants allow access to all fields of a buffer descriptor
+ * and are necessary at this level of visibility to allow macros to access
+ * and modify the fields of a buffer descriptor. It is not expected that the
+ * user of a buffer descriptor would need to use these constants.
+ */
+
+#define XBD_DEVICE_STATUS_OFFSET 0
+#define XBD_CONTROL_OFFSET 1
+#define XBD_SOURCE_OFFSET 2
+#define XBD_DESTINATION_OFFSET 3
+#define XBD_LENGTH_OFFSET 4
+#define XBD_STATUS_OFFSET 5
+#define XBD_NEXT_PTR_OFFSET 6
+#define XBD_ID_OFFSET 7
+#define XBD_FLAGS_OFFSET 8
+#define XBD_RQSTED_LENGTH_OFFSET 9
+
+#define XBD_SIZE_IN_WORDS 10
+
+/*
+ * The following constants define the bits of the flags field of a buffer
+ * descriptor
+ */
+
+#define XBD_FLAGS_LOCKED_MASK 1UL
+
+/**************************** Type Definitions *******************************/
+
+typedef u32 XBufDescriptor[XBD_SIZE_IN_WORDS];
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/* each of the following macros are named the same as functions rather than all
+ * upper case in order to allow either the macros or the functions to be
+ * used, see the source file xbuf_descriptor.c for documentation
+ */
+
+#define XBufDescriptor_Initialize(InstancePtr) \
+{ \
+ (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = 0); \
+ (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = 0); \
+ (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = 0); \
+ (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = 0); \
+ (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = 0); \
+ (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = 0); \
+ (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = 0); \
+ (*((u32 *)InstancePtr + XBD_ID_OFFSET) = 0); \
+ (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = 0); \
+ (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = 0); \
+}
+
+#define XBufDescriptor_GetControl(InstancePtr) \
+ (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET))
+
+#define XBufDescriptor_SetControl(InstancePtr, Control) \
+ (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = (u32)Control)
+
+#define XBufDescriptor_IsLastControl(InstancePtr) \
+ (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) & \
+ XDC_CONTROL_LAST_BD_MASK)
+
+#define XBufDescriptor_SetLast(InstancePtr) \
+ (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) |= XDC_CONTROL_LAST_BD_MASK)
+
+#define XBufDescriptor_GetSrcAddress(InstancePtr) \
+ ((u32 *)(*((u32 *)InstancePtr + XBD_SOURCE_OFFSET)))
+
+#define XBufDescriptor_SetSrcAddress(InstancePtr, Source) \
+ (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = (u32)Source)
+
+#define XBufDescriptor_GetDestAddress(InstancePtr) \
+ ((u32 *)(*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET)))
+
+#define XBufDescriptor_SetDestAddress(InstancePtr, Destination) \
+ (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = (u32)Destination)
+
+#define XBufDescriptor_GetLength(InstancePtr) \
+ (u32)(*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) - \
+ *((u32 *)InstancePtr + XBD_LENGTH_OFFSET))
+
+#define XBufDescriptor_SetLength(InstancePtr, Length) \
+{ \
+ (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = (u32)(Length)); \
+ (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = (u32)(Length));\
+}
+
+#define XBufDescriptor_GetStatus(InstancePtr) \
+ (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET))
+
+#define XBufDescriptor_SetStatus(InstancePtr, Status) \
+ (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = (u32)Status)
+
+#define XBufDescriptor_IsLastStatus(InstancePtr) \
+ (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET) & \
+ XDC_STATUS_LAST_BD_MASK)
+
+#define XBufDescriptor_GetDeviceStatus(InstancePtr) \
+ ((u32)(*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET)))
+
+#define XBufDescriptor_SetDeviceStatus(InstancePtr, Status) \
+ (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = (u32)Status)
+
+#define XBufDescriptor_GetNextPtr(InstancePtr) \
+ (XBufDescriptor *)(*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET))
+
+#define XBufDescriptor_SetNextPtr(InstancePtr, NextPtr) \
+ (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = (u32)NextPtr)
+
+#define XBufDescriptor_GetId(InstancePtr) \
+ (u32)(*((u32 *)InstancePtr + XBD_ID_OFFSET))
+
+#define XBufDescriptor_SetId(InstancePtr, Id) \
+ (*((u32 *)InstancePtr + XBD_ID_OFFSET) = (u32)Id)
+
+#define XBufDescriptor_GetFlags(InstancePtr) \
+ (u32)(*((u32 *)InstancePtr + XBD_FLAGS_OFFSET))
+
+#define XBufDescriptor_SetFlags(InstancePtr, Flags) \
+ (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = (u32)Flags)
+
+#define XBufDescriptor_Lock(InstancePtr) \
+ (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) |= XBD_FLAGS_LOCKED_MASK)
+
+#define XBufDescriptor_Unlock(InstancePtr) \
+ (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) &= ~XBD_FLAGS_LOCKED_MASK)
+
+#define XBufDescriptor_IsLocked(InstancePtr) \
+ (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) & XBD_FLAGS_LOCKED_MASK)
+
+/************************** Function Prototypes ******************************/
+
+/* The following prototypes are provided to allow each of the functions to
+ * be implemented as a function rather than a macro, and to provide the
+ * syntax to allow users to understand how to call the macros, they are
+ * commented out to prevent linker errors
+ *
+
+u32 XBufDescriptor_Initialize(XBufDescriptor* InstancePtr);
+
+u32 XBufDescriptor_GetControl(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetControl(XBufDescriptor* InstancePtr, u32 Control);
+
+u32 XBufDescriptor_IsLastControl(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetLast(XBufDescriptor* InstancePtr);
+
+u32 XBufDescriptor_GetLength(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetLength(XBufDescriptor* InstancePtr, u32 Length);
+
+u32 XBufDescriptor_GetStatus(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetStatus(XBufDescriptor* InstancePtr, u32 Status);
+u32 XBufDescriptor_IsLastStatus(XBufDescriptor* InstancePtr);
+
+u32 XBufDescriptor_GetDeviceStatus(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetDeviceStatus(XBufDescriptor* InstancePtr,
+ u32 Status);
+
+u32 XBufDescriptor_GetSrcAddress(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetSrcAddress(XBufDescriptor* InstancePtr,
+ u32 SourceAddress);
+
+u32 XBufDescriptor_GetDestAddress(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetDestAddress(XBufDescriptor* InstancePtr,
+ u32 DestinationAddress);
+
+XBufDescriptor* XBufDescriptor_GetNextPtr(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetNextPtr(XBufDescriptor* InstancePtr,
+ XBufDescriptor* NextPtr);
+
+u32 XBufDescriptor_GetId(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetId(XBufDescriptor* InstancePtr, u32 Id);
+
+u32 XBufDescriptor_GetFlags(XBufDescriptor* InstancePtr);
+void XBufDescriptor_SetFlags(XBufDescriptor* InstancePtr, u32 Flags);
+
+void XBufDescriptor_Lock(XBufDescriptor* InstancePtr);
+void XBufDescriptor_Unlock(XBufDescriptor* InstancePtr);
+u32 XBufDescriptor_IsLocked(XBufDescriptor* InstancePtr);
+
+void XBufDescriptor_Copy(XBufDescriptor* InstancePtr,
+ XBufDescriptor* DestinationPtr);
+
+*/
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/common/xdma_channel.c b/board/xilinx/common/xdma_channel.c
new file mode 100644
index 0000000..25f1e26
--- /dev/null
+++ b/board/xilinx/common/xdma_channel.c
@@ -0,0 +1,738 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+* FILENAME:
+*
+* xdma_channel.c
+*
+* DESCRIPTION:
+*
+* This file contains the DMA channel component. This component supports
+* a distributed DMA design in which each device can have it's own dedicated
+* DMA channel, as opposed to a centralized DMA design. This component
+* performs processing for DMA on all devices.
+*
+* See xdma_channel.h for more information about this component.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xdma_channel.h"
+#include "xbasic_types.h"
+#include "xio.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_Initialize
+*
+* DESCRIPTION:
+*
+* This function initializes a DMA channel. This function must be called
+* prior to using a DMA channel. Initialization of a channel includes setting
+* up the registers base address, and resetting the channel such that it's in a
+* known state. Interrupts for the channel are disabled when the channel is
+* reset.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* BaseAddress contains the base address of the registers for the DMA channel.
+*
+* RETURN VALUE:
+*
+* XST_SUCCESS indicating initialization was successful.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress)
+{
+ /* assert to verify input arguments, don't assert base address */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+
+ /* setup the base address of the registers for the DMA channel such
+ * that register accesses can be done
+ */
+ InstancePtr->RegBaseAddress = BaseAddress;
+
+ /* initialize the scatter gather list such that it indicates it has not
+ * been created yet and the DMA channel is ready to use (initialized)
+ */
+ InstancePtr->GetPtr = NULL;
+ InstancePtr->PutPtr = NULL;
+ InstancePtr->CommitPtr = NULL;
+ InstancePtr->LastPtr = NULL;
+
+ InstancePtr->TotalDescriptorCount = 0;
+ InstancePtr->ActiveDescriptorCount = 0;
+ InstancePtr->IsReady = XCOMPONENT_IS_READY;
+
+ /* initialize the version of the component
+ */
+ XVersion_FromString(&InstancePtr->Version, "1.00a");
+
+ /* reset the DMA channel such that it's in a known state and ready
+ * and indicate the initialization occured with no errors, note that
+ * the is ready variable must be set before this call or reset will assert
+ */
+ XDmaChannel_Reset(InstancePtr);
+
+ return XST_SUCCESS;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_IsReady
+*
+* DESCRIPTION:
+*
+* This function determines if a DMA channel component has been successfully
+* initialized such that it's ready to use.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* RETURN VALUE:
+*
+* TRUE if the DMA channel component is ready, FALSE otherwise.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+u32
+XDmaChannel_IsReady(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments used by the base component */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+
+ return InstancePtr->IsReady == XCOMPONENT_IS_READY;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_GetVersion
+*
+* DESCRIPTION:
+*
+* This function gets the software version for the specified DMA channel
+* component.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* RETURN VALUE:
+*
+* A pointer to the software version of the specified DMA channel.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+XVersion *
+XDmaChannel_GetVersion(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* return a pointer to the version of the DMA channel */
+
+ return &InstancePtr->Version;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_SelfTest
+*
+* DESCRIPTION:
+*
+* This function performs a self test on the specified DMA channel. This self
+* test is destructive as the DMA channel is reset and a register default is
+* verified.
+*
+* ARGUMENTS:
+*
+* InstancePtr is a pointer to the DMA channel to be operated on.
+*
+* RETURN VALUE:
+*
+* XST_SUCCESS is returned if the self test is successful, or one of the
+* following errors.
+*
+* XST_DMA_RESET_REGISTER_ERROR Indicates the control register value
+* after a reset was not correct
+*
+* NOTES:
+*
+* This test does not performs a DMA transfer to test the channel because the
+* DMA hardware will not currently allow a non-local memory transfer to non-local
+* memory (memory copy), but only allows a non-local memory to or from the device
+* memory (typically a FIFO).
+*
+******************************************************************************/
+
+#define XDC_CONTROL_REG_RESET_MASK 0x98000000UL /* control reg reset value */
+
+XStatus
+XDmaChannel_SelfTest(XDmaChannel * InstancePtr)
+{
+ u32 ControlReg;
+
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* reset the DMA channel such that it's in a known state before the test
+ * it resets to no interrupts enabled, the desired state for the test
+ */
+ XDmaChannel_Reset(InstancePtr);
+
+ /* this should be the first test to help prevent a lock up with the polling
+ * loop that occurs later in the test, check the reset value of the DMA
+ * control register to make sure it's correct, return with an error if not
+ */
+ ControlReg = XDmaChannel_GetControl(InstancePtr);
+ if (ControlReg != XDC_CONTROL_REG_RESET_MASK) {
+ return XST_DMA_RESET_REGISTER_ERROR;
+ }
+
+ return XST_SUCCESS;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_Reset
+*
+* DESCRIPTION:
+*
+* This function resets the DMA channel. This is a destructive operation such
+* that it should not be done while a channel is being used. If the DMA channel
+* is transferring data into other blocks, such as a FIFO, it may be necessary
+* to reset other blocks. This function does not modify the contents of a
+* scatter gather list for a DMA channel such that the user is responsible for
+* getting buffer descriptors from the list if necessary.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+void
+XDmaChannel_Reset(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* reset the DMA channel such that it's in a known state, the reset
+ * register is self clearing such that it only has to be set
+ */
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_RST_REG_OFFSET,
+ XDC_RESET_MASK);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_GetControl
+*
+* DESCRIPTION:
+*
+* This function gets the control register contents of the DMA channel.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* RETURN VALUE:
+*
+* The control register contents of the DMA channel. One or more of the
+* following values may be contained the register. Each of the values are
+* unique bit masks.
+*
+* XDC_DMACR_SOURCE_INCR_MASK Increment the source address
+* XDC_DMACR_DEST_INCR_MASK Increment the destination address
+* XDC_DMACR_SOURCE_LOCAL_MASK Local source address
+* XDC_DMACR_DEST_LOCAL_MASK Local destination address
+* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable
+* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt
+* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+u32
+XDmaChannel_GetControl(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* return the contents of the DMA control register */
+
+ return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_SetControl
+*
+* DESCRIPTION:
+*
+* This function sets the control register of the specified DMA channel.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* Control contains the value to be written to the control register of the DMA
+* channel. One or more of the following values may be contained the register.
+* Each of the values are unique bit masks such that they may be ORed together
+* to enable multiple bits or inverted and ANDed to disable multiple bits.
+*
+* XDC_DMACR_SOURCE_INCR_MASK Increment the source address
+* XDC_DMACR_DEST_INCR_MASK Increment the destination address
+* XDC_DMACR_SOURCE_LOCAL_MASK Local source address
+* XDC_DMACR_DEST_LOCAL_MASK Local destination address
+* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable
+* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt
+* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+void
+XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control)
+{
+ /* assert to verify input arguments except the control which can't be
+ * asserted since all values are valid
+ */
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* set the DMA control register to the specified value */
+
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET, Control);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_GetStatus
+*
+* DESCRIPTION:
+*
+* This function gets the status register contents of the DMA channel.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* RETURN VALUE:
+*
+* The status register contents of the DMA channel. One or more of the
+* following values may be contained the register. Each of the values are
+* unique bit masks.
+*
+* XDC_DMASR_BUSY_MASK The DMA channel is busy
+* XDC_DMASR_BUS_ERROR_MASK A bus error occurred
+* XDC_DMASR_BUS_TIMEOUT_MASK A bus timeout occurred
+* XDC_DMASR_LAST_BD_MASK The last buffer descriptor of a packet
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+u32
+XDmaChannel_GetStatus(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* return the contents of the DMA status register */
+
+ return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_SetIntrStatus
+*
+* DESCRIPTION:
+*
+* This function sets the interrupt status register of the specified DMA channel.
+* Setting any bit of the interrupt status register will clear the bit to
+* indicate the interrupt processing has been completed. The definitions of each
+* bit in the register match the definition of the bits in the interrupt enable
+* register.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* Status contains the value to be written to the status register of the DMA
+* channel. One or more of the following values may be contained the register.
+* Each of the values are unique bit masks such that they may be ORed together
+* to enable multiple bits or inverted and ANDed to disable multiple bits.
+*
+* XDC_IXR_DMA_DONE_MASK The dma operation is done
+* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
+* XDC_IXR_PKT_DONE_MASK A packet is complete
+* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
+* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
+* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
+* XDC_IXR_BD_MASK A buffer descriptor is done
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+void
+XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status)
+{
+ /* assert to verify input arguments except the status which can't be
+ * asserted since all values are valid
+ */
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* set the interrupt status register with the specified value such that
+ * all bits which are set in the register are cleared effectively clearing
+ * any active interrupts
+ */
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, Status);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_GetIntrStatus
+*
+* DESCRIPTION:
+*
+* This function gets the interrupt status register of the specified DMA channel.
+* The interrupt status register indicates which interrupts are active
+* for the DMA channel. If an interrupt is active, the status register must be
+* set (written) with the bit set for each interrupt which has been processed
+* in order to clear the interrupts. The definitions of each bit in the register
+* match the definition of the bits in the interrupt enable register.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* RETURN VALUE:
+*
+* The interrupt status register contents of the specified DMA channel.
+* One or more of the following values may be contained the register.
+* Each of the values are unique bit masks.
+*
+* XDC_IXR_DMA_DONE_MASK The dma operation is done
+* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
+* XDC_IXR_PKT_DONE_MASK A packet is complete
+* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
+* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
+* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
+* XDC_IXR_SG_END_MASK Current descriptor was the end of the list
+* XDC_IXR_BD_MASK A buffer descriptor is done
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+u32
+XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* return the contents of the interrupt status register */
+
+ return XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_SetIntrEnable
+*
+* DESCRIPTION:
+*
+* This function sets the interrupt enable register of the specified DMA
+* channel. The interrupt enable register contains bits which enable
+* individual interrupts for the DMA channel. The definitions of each bit
+* in the register match the definition of the bits in the interrupt status
+* register.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* Enable contains the interrupt enable register contents to be written
+* in the DMA channel. One or more of the following values may be contained
+* the register. Each of the values are unique bit masks such that they may be
+* ORed together to enable multiple bits or inverted and ANDed to disable
+* multiple bits.
+*
+* XDC_IXR_DMA_DONE_MASK The dma operation is done
+* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
+* XDC_IXR_PKT_DONE_MASK A packet is complete
+* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
+* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
+* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
+* XDC_IXR_SG_END_MASK Current descriptor was the end of the list
+* XDC_IXR_BD_MASK A buffer descriptor is done
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+void
+XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable)
+{
+ /* assert to verify input arguments except the enable which can't be
+ * asserted since all values are valid
+ */
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* set the interrupt enable register to the specified value */
+
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET, Enable);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_GetIntrEnable
+*
+* DESCRIPTION:
+*
+* This function gets the interrupt enable of the DMA channel. The
+* interrupt enable contains flags which enable individual interrupts for the
+* DMA channel. The definitions of each bit in the register match the definition
+* of the bits in the interrupt status register.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* RETURN VALUE:
+*
+* The interrupt enable of the DMA channel. One or more of the following values
+* may be contained the register. Each of the values are unique bit masks.
+*
+* XDC_IXR_DMA_DONE_MASK The dma operation is done
+* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
+* XDC_IXR_PKT_DONE_MASK A packet is complete
+* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
+* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
+* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
+* XDC_IXR_BD_MASK A buffer descriptor is done
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+u32
+XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* return the contents of the interrupt enable register */
+
+ return XIo_In32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_Transfer
+*
+* DESCRIPTION:
+*
+* This function starts the DMA channel transferring data from a memory source
+* to a memory destination. This function only starts the operation and returns
+* before the operation may be complete. If the interrupt is enabled, an
+* interrupt will be generated when the operation is complete, otherwise it is
+* necessary to poll the channel status to determine when it's complete. It is
+* the responsibility of the caller to determine when the operation is complete
+* by handling the generated interrupt or polling the status. It is also the
+* responsibility of the caller to ensure that the DMA channel is not busy with
+* another transfer before calling this function.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on.
+*
+* SourcePtr contains a pointer to the source memory where the data is to
+* be tranferred from and must be 32 bit aligned.
+*
+* DestinationPtr contains a pointer to the destination memory where the data
+* is to be transferred and must be 32 bit aligned.
+*
+* ByteCount contains the number of bytes to transfer during the DMA operation.
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* The DMA h/w will not currently allow a non-local memory transfer to non-local
+* memory (memory copy), but only allows a non-local memory to or from the device
+* memory (typically a FIFO).
+*
+* It is the responsibility of the caller to ensure that the cache is
+* flushed and invalidated both before and after the DMA operation completes
+* if the memory pointed to is cached. The caller must also ensure that the
+* pointers contain a physical address rather than a virtual address
+* if address translation is being used.
+*
+******************************************************************************/
+void
+XDmaChannel_Transfer(XDmaChannel * InstancePtr,
+ u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount)
+{
+ /* assert to verify input arguments and the alignment of any arguments
+ * which have expected alignments
+ */
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(SourcePtr != NULL);
+ XASSERT_VOID(((u32) SourcePtr & 3) == 0);
+ XASSERT_VOID(DestinationPtr != NULL);
+ XASSERT_VOID(((u32) DestinationPtr & 3) == 0);
+ XASSERT_VOID(ByteCount != 0);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* setup the source and destination address registers for the transfer */
+
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_SA_REG_OFFSET,
+ (u32) SourcePtr);
+
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_DA_REG_OFFSET,
+ (u32) DestinationPtr);
+
+ /* start the DMA transfer to copy from the source buffer to the
+ * destination buffer by writing the length to the length register
+ */
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_LEN_REG_OFFSET, ByteCount);
+}
diff --git a/board/xilinx/common/xdma_channel.h b/board/xilinx/common/xdma_channel.h
new file mode 100644
index 0000000..06976c3
--- /dev/null
+++ b/board/xilinx/common/xdma_channel.h
@@ -0,0 +1,291 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+* FILENAME:
+*
+* xdma_channel.h
+*
+* DESCRIPTION:
+*
+* This file contains the DMA channel component implementation. This component
+* supports a distributed DMA design in which each device can have it's own
+* dedicated DMA channel, as opposed to a centralized DMA design.
+* A device which uses DMA typically contains two DMA channels, one for
+* sending data and the other for receiving data.
+*
+* This component is designed to be used as a basic building block for
+* designing a device driver. It provides registers accesses such that all
+* DMA processing can be maintained easier, but the device driver designer
+* must still understand all the details of the DMA channel.
+*
+* The DMA channel allows a CPU to minimize the CPU interaction required to move
+* data between a memory and a device. The CPU requests the DMA channel to
+* perform a DMA operation and typically continues performing other processing
+* until the DMA operation completes. DMA could be considered a primitive form
+* of multiprocessing such that caching and address translation can be an issue.
+*
+* Scatter Gather Operations
+*
+* The DMA channel may support scatter gather operations. A scatter gather
+* operation automates the DMA channel such that multiple buffers can be
+* sent or received with minimal software interaction with the hardware. Buffer
+* descriptors, contained in the XBufDescriptor component, are used by the
+* scatter gather operations of the DMA channel to describe the buffers to be
+* processed.
+*
+* Scatter Gather List Operations
+*
+* A scatter gather list may be supported by each DMA channel. The scatter
+* gather list allows buffer descriptors to be put into the list by a device
+* driver which requires scatter gather. The hardware processes the buffer
+* descriptors which are contained in the list and modifies the buffer
+* descriptors to reflect the status of the DMA operations. The device driver
+* is notified by interrupt that specific DMA events occur including scatter
+* gather events. The device driver removes the completed buffer descriptors
+* from the scatter gather list to evaluate the status of each DMA operation.
+*
+* The scatter gather list is created and buffer descriptors are inserted into
+* the list. Buffer descriptors are never removed from the list after it's
+* creation such that a put operation copies from a temporary buffer descriptor
+* to a buffer descriptor in the list. Get operations don't copy from the list
+* to a temporary, but return a pointer to the buffer descriptor in the list.
+* A buffer descriptor in the list may be locked to prevent it from being
+* overwritten by a put operation. This allows the device driver to get a
+* descriptor from a scatter gather list and prevent it from being overwritten
+* until the buffer associated with the buffer descriptor has been processed.
+*
+* Typical Scatter Gather Processing
+*
+* The following steps illustrate the typical processing to use the
+* scatter gather features of a DMA channel.
+*
+* 1. Create a scatter gather list for the DMA channel which puts empty buffer
+* descriptors into the list.
+* 2. Create buffer descriptors which describe the buffers to be filled with
+* receive data or the buffers which contain data to be sent.
+* 3. Put buffer descriptors into the DMA channel scatter list such that scatter
+* gather operations are requested.
+* 4. Commit the buffer descriptors in the list such that they are ready to be
+* used by the DMA channel hardware.
+* 5. Start the scatter gather operations of the DMA channel.
+* 6. Process any interrupts which occur as a result of the scatter gather
+* operations or poll the DMA channel to determine the status.
+*
+* Interrupts
+*
+* Each DMA channel has the ability to generate an interrupt. This component
+* does not perform processing for the interrupt as this processing is typically
+* tightly coupled with the device which is using the DMA channel. It is the
+* responsibility of the caller of DMA functions to manage the interrupt
+* including connecting to the interrupt and enabling/disabling the interrupt.
+*
+* Critical Sections
+*
+* It is the responsibility of the device driver designer to use critical
+* sections as necessary when calling functions of the DMA channel. This
+* component does not use critical sections and it does access registers using
+* read-modify-write operations. Calls to DMA functions from a main thread
+* and from an interrupt context could produce unpredictable behavior such that
+* the caller must provide the appropriate critical sections.
+*
+* Address Translation
+*
+* All addresses of data structures which are passed to DMA functions must
+* be physical (real) addresses as opposed to logical (virtual) addresses.
+*
+* Caching
+*
+* The memory which is passed to the function which creates the scatter gather
+* list must not be cached such that buffer descriptors are non-cached. This
+* is necessary because the buffer descriptors are kept in a ring buffer and
+* not directly accessible to the caller of DMA functions.
+*
+* The caller of DMA functions is responsible for ensuring that any data
+* buffers which are passed to the DMA channel are cache-line aligned if
+* necessary.
+*
+* The caller of DMA functions is responsible for ensuring that any data
+* buffers which are passed to the DMA channel have been flushed from the cache.
+*
+* The caller of DMA functions is responsible for ensuring that the cache is
+* invalidated prior to using any data buffers which are the result of a DMA
+* operation.
+*
+* Memory Alignment
+*
+* The addresses of data buffers which are passed to DMA functions must be
+* 32 bit word aligned since the DMA hardware performs 32 bit word transfers.
+*
+* Mutual Exclusion
+*
+* The functions of the DMA channel are not thread safe such that the caller
+* of all DMA functions is responsible for ensuring mutual exclusion for a
+* DMA channel. Mutual exclusion across multiple DMA channels is not
+* necessary.
+*
+* NOTES:
+*
+* Many of the provided functions which are register accessors don't provide
+* a lot of error detection. The caller is expected to understand the impact
+* of a function call based upon the current state of the DMA channel. This
+* is done to minimize the overhead in this component.
+*
+******************************************************************************/
+
+#ifndef XDMA_CHANNEL_H /* prevent circular inclusions */
+#define XDMA_CHANNEL_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xdma_channel_i.h" /* constants shared with buffer descriptor */
+#include "xbasic_types.h"
+#include "xstatus.h"
+#include "xversion.h"
+#include "xbuf_descriptor.h"
+
+/************************** Constant Definitions *****************************/
+
+/* the following constants provide access to the bit fields of the DMA control
+ * register (DMACR)
+ */
+#define XDC_DMACR_SOURCE_INCR_MASK 0x80000000UL /* increment source address */
+#define XDC_DMACR_DEST_INCR_MASK 0x40000000UL /* increment dest address */
+#define XDC_DMACR_SOURCE_LOCAL_MASK 0x20000000UL /* local source address */
+#define XDC_DMACR_DEST_LOCAL_MASK 0x10000000UL /* local dest address */
+#define XDC_DMACR_SG_DISABLE_MASK 0x08000000UL /* scatter gather disable */
+#define XDC_DMACR_GEN_BD_INTR_MASK 0x04000000UL /* descriptor interrupt */
+#define XDC_DMACR_LAST_BD_MASK XDC_CONTROL_LAST_BD_MASK /* last buffer */
+ /* descriptor */
+
+/* the following constants provide access to the bit fields of the DMA status
+ * register (DMASR)
+ */
+#define XDC_DMASR_BUSY_MASK 0x80000000UL /* channel is busy */
+#define XDC_DMASR_BUS_ERROR_MASK 0x40000000UL /* bus error occurred */
+#define XDC_DMASR_BUS_TIMEOUT_MASK 0x20000000UL /* bus timeout occurred */
+#define XDC_DMASR_LAST_BD_MASK XDC_STATUS_LAST_BD_MASK /* last buffer */
+ /* descriptor */
+#define XDC_DMASR_SG_BUSY_MASK 0x08000000UL /* scatter gather is busy */
+
+/* the following constants provide access to the bit fields of the interrupt
+ * status register (ISR) and the interrupt enable register (IER), bit masks
+ * match for both registers such that they are named IXR
+ */
+#define XDC_IXR_DMA_DONE_MASK 0x1UL /* dma operation done */
+#define XDC_IXR_DMA_ERROR_MASK 0x2UL /* dma operation error */
+#define XDC_IXR_PKT_DONE_MASK 0x4UL /* packet done */
+#define XDC_IXR_PKT_THRESHOLD_MASK 0x8UL /* packet count threshold */
+#define XDC_IXR_PKT_WAIT_BOUND_MASK 0x10UL /* packet wait bound reached */
+#define XDC_IXR_SG_DISABLE_ACK_MASK 0x20UL /* scatter gather disable
+ acknowledge occurred */
+#define XDC_IXR_SG_END_MASK 0x40UL /* last buffer descriptor
+ disabled scatter gather */
+#define XDC_IXR_BD_MASK 0x80UL /* buffer descriptor done */
+
+/**************************** Type Definitions *******************************/
+
+/*
+ * the following structure contains data which is on a per instance basis
+ * for the XDmaChannel component
+ */
+typedef struct XDmaChannelTag {
+ XVersion Version; /* version of the driver */
+ u32 RegBaseAddress; /* base address of registers */
+ u32 IsReady; /* device is initialized and ready */
+
+ XBufDescriptor *PutPtr; /* keep track of where to put into list */
+ XBufDescriptor *GetPtr; /* keep track of where to get from list */
+ XBufDescriptor *CommitPtr; /* keep track of where to commit in list */
+ XBufDescriptor *LastPtr; /* keep track of the last put in the list */
+ u32 TotalDescriptorCount; /* total # of descriptors in the list */
+ u32 ActiveDescriptorCount; /* # of descriptors pointing to buffers
+ * in the buffer descriptor list */
+} XDmaChannel;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+XStatus XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress);
+u32 XDmaChannel_IsReady(XDmaChannel * InstancePtr);
+XVersion *XDmaChannel_GetVersion(XDmaChannel * InstancePtr);
+XStatus XDmaChannel_SelfTest(XDmaChannel * InstancePtr);
+void XDmaChannel_Reset(XDmaChannel * InstancePtr);
+
+/* Control functions */
+
+u32 XDmaChannel_GetControl(XDmaChannel * InstancePtr);
+void XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control);
+
+/* Status functions */
+
+u32 XDmaChannel_GetStatus(XDmaChannel * InstancePtr);
+void XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status);
+u32 XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr);
+void XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable);
+u32 XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr);
+
+/* DMA without scatter gather functions */
+
+void XDmaChannel_Transfer(XDmaChannel * InstancePtr,
+ u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount);
+
+/* Scatter gather functions */
+
+XStatus XDmaChannel_SgStart(XDmaChannel * InstancePtr);
+XStatus XDmaChannel_SgStop(XDmaChannel * InstancePtr,
+ XBufDescriptor ** BufDescriptorPtr);
+XStatus XDmaChannel_CreateSgList(XDmaChannel * InstancePtr,
+ u32 * MemoryPtr, u32 ByteCount);
+u32 XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr);
+
+XStatus XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr,
+ XBufDescriptor * BufDescriptorPtr);
+XStatus XDmaChannel_CommitPuts(XDmaChannel * InstancePtr);
+XStatus XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr,
+ XBufDescriptor ** BufDescriptorPtr);
+
+/* Packet functions for interrupt collescing */
+
+u32 XDmaChannel_GetPktCount(XDmaChannel * InstancePtr);
+void XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr);
+XStatus XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold);
+u8 XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr);
+void XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound);
+u32 XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr);
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/common/xdma_channel_i.h b/board/xilinx/common/xdma_channel_i.h
new file mode 100644
index 0000000..e9f343b
--- /dev/null
+++ b/board/xilinx/common/xdma_channel_i.h
@@ -0,0 +1,110 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+* FILENAME:
+*
+* xdma_channel_i.h
+*
+* DESCRIPTION:
+*
+* This file contains data which is shared internal data for the DMA channel
+* component. It is also shared with the buffer descriptor component which is
+* very tightly coupled with the DMA channel component.
+*
+* NOTES:
+*
+* The last buffer descriptor constants must be located here to prevent a
+* circular dependency between the DMA channel component and the buffer
+* descriptor component.
+*
+******************************************************************************/
+
+#ifndef XDMA_CHANNEL_I_H /* prevent circular inclusions */
+#define XDMA_CHANNEL_I_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xstatus.h"
+#include "xversion.h"
+
+/************************** Constant Definitions *****************************/
+
+#define XDC_DMA_CHANNEL_V1_00_A "1.00a"
+
+/* the following constant provides access to the bit fields of the DMA control
+ * register (DMACR) which must be shared between the DMA channel component
+ * and the buffer descriptor component
+ */
+#define XDC_CONTROL_LAST_BD_MASK 0x02000000UL /* last buffer descriptor */
+
+/* the following constant provides access to the bit fields of the DMA status
+ * register (DMASR) which must be shared between the DMA channel component
+ * and the buffer descriptor component
+ */
+#define XDC_STATUS_LAST_BD_MASK 0x10000000UL /* last buffer descriptor */
+
+/* the following constants provide access to each of the registers of a DMA
+ * channel
+ */
+#define XDC_RST_REG_OFFSET 0 /* reset register */
+#define XDC_MI_REG_OFFSET 0 /* module information register */
+#define XDC_DMAC_REG_OFFSET 4 /* DMA control register */
+#define XDC_SA_REG_OFFSET 8 /* source address register */
+#define XDC_DA_REG_OFFSET 12 /* destination address register */
+#define XDC_LEN_REG_OFFSET 16 /* length register */
+#define XDC_DMAS_REG_OFFSET 20 /* DMA status register */
+#define XDC_BDA_REG_OFFSET 24 /* buffer descriptor address register */
+#define XDC_SWCR_REG_OFFSET 28 /* software control register */
+#define XDC_UPC_REG_OFFSET 32 /* unserviced packet count register */
+#define XDC_PCT_REG_OFFSET 36 /* packet count threshold register */
+#define XDC_PWB_REG_OFFSET 40 /* packet wait bound register */
+#define XDC_IS_REG_OFFSET 44 /* interrupt status register */
+#define XDC_IE_REG_OFFSET 48 /* interrupt enable register */
+
+/* the following constant is written to the reset register to reset the
+ * DMA channel
+ */
+#define XDC_RESET_MASK 0x0000000AUL
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/common/xdma_channel_sg.c b/board/xilinx/common/xdma_channel_sg.c
new file mode 100644
index 0000000..a8e9462
--- /dev/null
+++ b/board/xilinx/common/xdma_channel_sg.c
@@ -0,0 +1,1317 @@
+/* $Id: xdma_channel_sg.c,v 1.6 2003/02/03 19:50:33 moleres Exp $ */
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+* FILENAME:
+*
+* xdma_channel_sg.c
+*
+* DESCRIPTION:
+*
+* This file contains the implementation of the XDmaChannel component which is
+* related to scatter gather operations.
+*
+* Scatter Gather Operations
+*
+* The DMA channel may support scatter gather operations. A scatter gather
+* operation automates the DMA channel such that multiple buffers can be
+* sent or received with minimal software interaction with the hardware. Buffer
+* descriptors, contained in the XBufDescriptor component, are used by the
+* scatter gather operations of the DMA channel to describe the buffers to be
+* processed.
+*
+* Scatter Gather List Operations
+*
+* A scatter gather list may be supported by each DMA channel. The scatter
+* gather list allows buffer descriptors to be put into the list by a device
+* driver which requires scatter gather. The hardware processes the buffer
+* descriptors which are contained in the list and modifies the buffer
+* descriptors to reflect the status of the DMA operations. The device driver
+* is notified by interrupt that specific DMA events occur including scatter
+* gather events. The device driver removes the completed buffer descriptors
+* from the scatter gather list to evaluate the status of each DMA operation.
+*
+* The scatter gather list is created and buffer descriptors are inserted into
+* the list. Buffer descriptors are never removed from the list after it's
+* creation such that a put operation copies from a temporary buffer descriptor
+* to a buffer descriptor in the list. Get operations don't copy from the list
+* to a temporary, but return a pointer to the buffer descriptor in the list.
+* A buffer descriptor in the list may be locked to prevent it from being
+* overwritten by a put operation. This allows the device driver to get a
+* descriptor from a scatter gather list and prevent it from being overwritten
+* until the buffer associated with the buffer descriptor has been processed.
+*
+* The get and put functions only operate on the list and are asynchronous from
+* the hardware which may be using the list of descriptors. This is important
+* because there are no checks in the get and put functions to ensure that the
+* hardware has processed the descriptors. This must be handled by the driver
+* using the DMA scatter gather channel through the use of the other functions.
+* When a scatter gather operation is started, the start function does ensure
+* that the descriptor to start has not already been processed by the hardware
+* and is not the first of a series of descriptors that have not been committed
+* yet.
+*
+* Descriptors are put into the list but not marked as ready to use by the
+* hardware until a commit operation is done. This allows multiple descriptors
+* which may contain a single packet of information for a protocol to be
+* guaranteed not to cause any underflow conditions during transmission. The
+* hardware design only allows descriptors to cause it to stop after a descriptor
+* has been processed rather than before it is processed. A series of
+* descriptors are put into the list followed by a commit operation, or each
+* descriptor may be commited. A commit operation is performed by changing a
+* single descriptor, the first of the series of puts, to indicate that the
+* hardware may now use all descriptors after it. The last descriptor in the
+* list is always set to cause the hardware to stop after it is processed.
+*
+* Typical Scatter Gather Processing
+*
+* The following steps illustrate the typical processing to use the
+* scatter gather features of a DMA channel.
+*
+* 1. Create a scatter gather list for the DMA channel which puts empty buffer
+* descriptors into the list.
+* 2. Create buffer descriptors which describe the buffers to be filled with
+* receive data or the buffers which contain data to be sent.
+* 3. Put buffer descriptors into the DMA channel scatter list such that scatter
+* gather operations are requested.
+* 4. Commit the buffer descriptors in the list such that they are ready to be
+* used by the DMA channel hardware.
+* 5. Start the scatter gather operations of the DMA channel.
+* 6. Process any interrupts which occur as a result of the scatter gather
+* operations or poll the DMA channel to determine the status. This may
+* be accomplished by getting the packet count for the channel and then
+* getting the appropriate number of descriptors from the list for that
+* number of packets.
+*
+* Minimizing Interrupts
+*
+* The Scatter Gather operating mode is designed to reduce the amount of CPU
+* throughput necessary to manage the hardware for devices. A key to the CPU
+* throughput is the number and rate of interrupts that the CPU must service.
+* Devices with higher data rates can cause larger numbers of interrupts and
+* higher frequency interrupts. Ideally the number of interrupts can be reduced
+* by only generating an interrupt when a specific amount of data has been
+* received from the interface. This design suffers from a lack of interrupts
+* when the amount of data received is less than the specified amount of data
+* to generate an interrupt. In order to help minimize the number of interrupts
+* which the CPU must service, an algorithm referred to as "interrupt coalescing"
+* is utilized.
+*
+* Interrupt Coalescing
+*
+* The principle of interrupt coalescing is to wait before generating an
+* interrupt until a certain number of packets have been received or sent. An
+* interrupt is also generated if a smaller number of packets have been received
+* followed by a certain period of time with no packet reception. This is a
+* trade-off of latency for bandwidth and is accomplished using several
+* mechanisms of the hardware including a counter for packets received or
+* transmitted and a packet timer. These two hardware mechanisms work in
+* combination to allow a reduction in the number of interrupts processed by the
+* CPU for packet reception.
+*
+* Unserviced Packet Count
+*
+* The purpose of the packet counter is to count the number of packets received
+* or transmitted and provide an interrupt when a specific number of packets
+* have been processed by the hardware. An interrupt is generated whenever the
+* counter is greater than or equal to the Packet Count Threshold. This counter
+* contains an accurate count of the number of packets that the hardware has
+* processed, either received or transmitted, and the software has not serviced.
+*
+* The packet counter allows the number of interrupts to be reduced by waiting
+* to generate an interrupt until enough packets are received. For packet
+* reception, packet counts of less than the number to generate an interrupt
+* would not be serviced without the addition of a packet timer. This counter is
+* continuously updated by the hardware, not latched to the value at the time
+* the interrupt occurred.
+*
+* The packet counter can be used within the interrupt service routine for the
+* device to reduce the number of interrupts. The interrupt service routine
+* loops while performing processing for each packet which has been received or
+* transmitted and decrements the counter by a specified value. At the same time,
+* the hardware is possibly continuing to receive or transmit more packets such
+* that the software may choose, based upon the value in the packet counter, to
+* remain in the interrupt service routine rather than exiting and immediately
+* returning. This feature should be used with caution as reducing the number of
+* interrupts is beneficial, but unbounded interrupt processing is not desirable.
+*
+* Since the hardware may be incrementing the packet counter simultaneously
+* with the software decrementing the counter, there is a need for atomic
+* operations. The hardware ensures that the operation is atomic such that
+* simultaneous accesses are properly handled.
+*
+* Packet Wait Bound
+*
+* The purpose of the packet wait bound is to augment the unserviced packet
+* count. Whenever there is no pending interrupt for the channel and the
+* unserviced packet count is non-zero, a timer starts counting timeout at the
+* value contained the the packet wait bound register. If the timeout is
+* reached, an interrupt is generated such that the software may service the
+* data which was buffered.
+*
+* NOTES:
+*
+* Special Test Conditions:
+*
+* The scatter gather list processing must be thoroughly tested if changes are
+* made. Testing should include putting and committing single descriptors and
+* putting multiple descriptors followed by a single commit. There are some
+* conditions in the code which handle the exception conditions.
+*
+* The Put Pointer points to the next location in the descriptor list to copy
+* in a new descriptor. The Get Pointer points to the next location in the
+* list to get a descriptor from. The Get Pointer only allows software to
+* have a traverse the list after the hardware has finished processing some
+* number of descriptors. The Commit Pointer points to the descriptor in the
+* list which is to be committed. It is also used to determine that no
+* descriptor is waiting to be commited (NULL). The Last Pointer points to
+* the last descriptor that was put into the list. It typically points
+* to the previous descriptor to the one pointed to by the Put Pointer.
+* Comparisons are done between these pointers to determine when the following
+* special conditions exist.
+
+* Single Put And Commit
+*
+* The buffer descriptor is ready to be used by the hardware so it is important
+* for the descriptor to not appear to be waiting to be committed. The commit
+* pointer is reset when a commit is done indicating there are no descriptors
+* waiting to be committed. In all cases but this one, the descriptor is
+* changed to cause the hardware to go to the next descriptor after processing
+* this one. But in this case, this is the last descriptor in the list such
+* that it must not be changed.
+*
+* 3 Or More Puts And Commit
+*
+* A series of 3 or more puts followed by a single commit is different in that
+* only the 1st descriptor put into the list is changed when the commit is done.
+* This requires each put starting on the 3rd to change the previous descriptor
+* so that it allows the hardware to continue to the next descriptor in the list.
+*
+* The 1st Put Following A Commit
+*
+* The commit caused the commit pointer to be NULL indicating that there are no
+* descriptors waiting to be committed. It is necessary for the next put to set
+* the commit pointer so that a commit must follow the put for the hardware to
+* use the descriptor.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- ------------------------------------------------------
+* 1.00a rpm 02/03/03 Removed the XST_DMA_SG_COUNT_EXCEEDED return code
+* from SetPktThreshold.
+* </pre>
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xdma_channel.h"
+#include "xbasic_types.h"
+#include "xio.h"
+#include "xbuf_descriptor.h"
+#include "xstatus.h"
+
+/************************** Constant Definitions *****************************/
+
+#define XDC_SWCR_SG_ENABLE_MASK 0x80000000UL /* scatter gather enable */
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/* the following macro copies selected fields of a buffer descriptor to another
+ * buffer descriptor, this was provided by the buffer descriptor component but
+ * was moved here since it is only used internally to this component and since
+ * it does not copy all fields
+ */
+#define CopyBufferDescriptor(InstancePtr, DestinationPtr) \
+{ \
+ *((u32 *)DestinationPtr + XBD_CONTROL_OFFSET) = \
+ *((u32 *)InstancePtr + XBD_CONTROL_OFFSET); \
+ *((u32 *)DestinationPtr + XBD_SOURCE_OFFSET) = \
+ *((u32 *)InstancePtr + XBD_SOURCE_OFFSET); \
+ *((u32 *)DestinationPtr + XBD_DESTINATION_OFFSET) = \
+ *((u32 *)InstancePtr + XBD_DESTINATION_OFFSET); \
+ *((u32 *)DestinationPtr + XBD_LENGTH_OFFSET) = \
+ *((u32 *)InstancePtr + XBD_LENGTH_OFFSET); \
+ *((u32 *)DestinationPtr + XBD_STATUS_OFFSET) = \
+ *((u32 *)InstancePtr + XBD_STATUS_OFFSET); \
+ *((u32 *)DestinationPtr + XBD_DEVICE_STATUS_OFFSET) = \
+ *((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET); \
+ *((u32 *)DestinationPtr + XBD_ID_OFFSET) = \
+ *((u32 *)InstancePtr + XBD_ID_OFFSET); \
+ *((u32 *)DestinationPtr + XBD_FLAGS_OFFSET) = \
+ *((u32 *)InstancePtr + XBD_FLAGS_OFFSET); \
+ *((u32 *)DestinationPtr + XBD_RQSTED_LENGTH_OFFSET) = \
+ *((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET); \
+}
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_SgStart
+*
+* DESCRIPTION:
+*
+* This function starts a scatter gather operation for a scatter gather
+* DMA channel. The first buffer descriptor in the buffer descriptor list
+* will be started with the scatter gather operation. A scatter gather list
+* should have previously been created for the DMA channel and buffer
+* descriptors put into the scatter gather list such that there are scatter
+* operations ready to be performed.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* RETURN VALUE:
+*
+* A status containing XST_SUCCESS if scatter gather was started successfully
+* for the DMA channel.
+*
+* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
+* been created.
+*
+* A value of XST_DMA_SG_LIST_EMPTY indicates scatter gather was not started
+* because the scatter gather list of the DMA channel does not contain any
+* buffer descriptors that are ready to be processed by the hardware.
+*
+* A value of XST_DMA_SG_IS_STARTED indicates scatter gather was not started
+* because the scatter gather was not stopped, but was already started.
+*
+* A value of XST_DMA_SG_BD_NOT_COMMITTED indicates the buffer descriptor of
+* scatter gather list which was to be started is not committed to the list.
+* This status is more likely if this function is being called from an ISR
+* and non-ISR processing is putting descriptors into the list.
+*
+* A value of XST_DMA_SG_NO_DATA indicates that the buffer descriptor of the
+* scatter gather list which was to be started had already been used by the
+* hardware for a DMA transfer that has been completed.
+*
+* NOTES:
+*
+* It is the responsibility of the caller to get all the buffer descriptors
+* after performing a stop operation and before performing a start operation.
+* If buffer descriptors are not retrieved between stop and start operations,
+* buffer descriptors may be processed by the hardware more than once.
+*
+******************************************************************************/
+XStatus
+XDmaChannel_SgStart(XDmaChannel * InstancePtr)
+{
+ u32 Register;
+ XBufDescriptor *LastDescriptorPtr;
+
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* if a scatter gather list has not been created yet, return a status */
+
+ if (InstancePtr->TotalDescriptorCount == 0) {
+ return XST_DMA_SG_NO_LIST;
+ }
+
+ /* if the scatter gather list exists but is empty then return a status */
+
+ if (XDmaChannel_IsSgListEmpty(InstancePtr)) {
+ return XST_DMA_SG_LIST_EMPTY;
+ }
+
+ /* if scatter gather is busy for the DMA channel, return a status because
+ * restarting it could lose data
+ */
+
+ Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
+ if (Register & XDC_DMASR_SG_BUSY_MASK) {
+ return XST_DMA_SG_IS_STARTED;
+ }
+
+ /* get the address of the last buffer descriptor which the DMA hardware
+ * finished processing
+ */
+ LastDescriptorPtr =
+ (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress +
+ XDC_BDA_REG_OFFSET);
+
+ /* setup the first buffer descriptor that will be sent when the scatter
+ * gather channel is enabled, this is only necessary one time since
+ * the BDA register of the channel maintains the last buffer descriptor
+ * processed
+ */
+ if (LastDescriptorPtr == NULL) {
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_BDA_REG_OFFSET,
+ (u32) InstancePtr->GetPtr);
+ } else {
+ XBufDescriptor *NextDescriptorPtr;
+
+ /* get the next descriptor to be started, if the status indicates it
+ * hasn't already been used by the h/w, then it's OK to start it,
+ * s/w sets the status of each descriptor to busy and then h/w clears
+ * the busy when it is complete
+ */
+ NextDescriptorPtr =
+ XBufDescriptor_GetNextPtr(LastDescriptorPtr);
+
+ if ((XBufDescriptor_GetStatus(NextDescriptorPtr) &
+ XDC_DMASR_BUSY_MASK) == 0) {
+ return XST_DMA_SG_NO_DATA;
+ }
+ /* don't start the DMA SG channel if the descriptor to be processed
+ * by h/w is to be committed by the s/w, this function can be called
+ * such that it interrupts a thread that was putting into the list
+ */
+ if (NextDescriptorPtr == InstancePtr->CommitPtr) {
+ return XST_DMA_SG_BD_NOT_COMMITTED;
+ }
+ }
+
+ /* start the scatter gather operation by clearing the stop bit in the
+ * control register and setting the enable bit in the s/w control register,
+ * both of these are necessary to cause it to start, right now the order of
+ * these statements is important, the software control register should be
+ * set 1st. The other order can cause the CPU to have a loss of sync
+ * because it cannot read/write the register while the DMA operation is
+ * running
+ */
+
+ Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET);
+
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET,
+ Register | XDC_SWCR_SG_ENABLE_MASK);
+
+ Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET);
+
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET,
+ Register & ~XDC_DMACR_SG_DISABLE_MASK);
+
+ /* indicate the DMA channel scatter gather operation was started
+ * successfully
+ */
+ return XST_SUCCESS;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_SgStop
+*
+* DESCRIPTION:
+*
+* This function stops a scatter gather operation for a scatter gather
+* DMA channel. This function starts the process of stopping a scatter
+* gather operation that is in progress and waits for the stop to be completed.
+* Since it waits for the operation to stopped before returning, this function
+* could take an amount of time relative to the size of the DMA scatter gather
+* operation which is in progress. The scatter gather list of the DMA channel
+* is not modified by this function such that starting the scatter gather
+* channel after stopping it will cause it to resume. This operation is
+* considered to be a graceful stop in that the scatter gather operation
+* completes the current buffer descriptor before stopping.
+*
+* If the interrupt is enabled, an interrupt will be generated when the
+* operation is stopped and the caller is responsible for handling the
+* interrupt.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* BufDescriptorPtr is also a return value which contains a pointer to the
+* buffer descriptor which the scatter gather operation completed when it
+* was stopped.
+*
+* RETURN VALUE:
+*
+* A status containing XST_SUCCESS if scatter gather was stopped successfully
+* for the DMA channel.
+*
+* A value of XST_DMA_SG_IS_STOPPED indicates scatter gather was not stoppped
+* because the scatter gather is not started, but was already stopped.
+*
+* BufDescriptorPtr contains a pointer to the buffer descriptor which was
+* completed when the operation was stopped.
+*
+* NOTES:
+*
+* This function implements a loop which polls the hardware for an infinite
+* amount of time. If the hardware is not operating correctly, this function
+* may never return.
+*
+******************************************************************************/
+XStatus
+XDmaChannel_SgStop(XDmaChannel * InstancePtr,
+ XBufDescriptor ** BufDescriptorPtr)
+{
+ u32 Register;
+
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(BufDescriptorPtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* get the contents of the software control register, if scatter gather is not
+ * enabled (started), then return a status because the disable acknowledge
+ * would not be generated
+ */
+ Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET);
+
+ if ((Register & XDC_SWCR_SG_ENABLE_MASK) == 0) {
+ return XST_DMA_SG_IS_STOPPED;
+ }
+
+ /* Ensure the interrupt status for the scatter gather is cleared such
+ * that this function will wait til the disable has occurred, writing
+ * a 1 to only that bit in the register will clear only it
+ */
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET,
+ XDC_IXR_SG_DISABLE_ACK_MASK);
+
+ /* disable scatter gather by writing to the software control register
+ * without modifying any other bits of the register
+ */
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET,
+ Register & ~XDC_SWCR_SG_ENABLE_MASK);
+
+ /* scatter gather does not disable immediately, but after the current
+ * buffer descriptor is complete, so wait for the DMA channel to indicate
+ * the disable is complete
+ */
+ do {
+ Register =
+ XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
+ } while ((Register & XDC_IXR_SG_DISABLE_ACK_MASK) == 0);
+
+ /* Ensure the interrupt status for the scatter gather disable is cleared,
+ * writing a 1 to only that bit in the register will clear only it
+ */
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET,
+ XDC_IXR_SG_DISABLE_ACK_MASK);
+
+ /* set the specified buffer descriptor pointer to point to the buffer
+ * descriptor that the scatter gather DMA channel was processing
+ */
+ *BufDescriptorPtr =
+ (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress +
+ XDC_BDA_REG_OFFSET);
+
+ return XST_SUCCESS;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_CreateSgList
+*
+* DESCRIPTION:
+*
+* This function creates a scatter gather list in the DMA channel. A scatter
+* gather list consists of a list of buffer descriptors that are available to
+* be used for scatter gather operations. Buffer descriptors are put into the
+* list to request a scatter gather operation to be performed.
+*
+* A number of buffer descriptors are created from the specified memory and put
+* into a buffer descriptor list as empty buffer descriptors. This function must
+* be called before non-empty buffer descriptors may be put into the DMA channel
+* to request scatter gather operations.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* MemoryPtr contains a pointer to the memory which is to be used for buffer
+* descriptors and must not be cached.
+*
+* ByteCount contains the number of bytes for the specified memory to be used
+* for buffer descriptors.
+*
+* RETURN VALUE:
+*
+* A status contains XST_SUCCESS if the scatter gather list was successfully
+* created.
+*
+* A value of XST_DMA_SG_LIST_EXISTS indicates that the scatter gather list
+* was not created because the list has already been created.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XDmaChannel_CreateSgList(XDmaChannel * InstancePtr,
+ u32 * MemoryPtr, u32 ByteCount)
+{
+ XBufDescriptor *BufferDescriptorPtr = (XBufDescriptor *) MemoryPtr;
+ XBufDescriptor *PreviousDescriptorPtr = NULL;
+ XBufDescriptor *StartOfListPtr = BufferDescriptorPtr;
+ u32 UsedByteCount;
+
+ /* assert to verify valid input arguments, alignment for those
+ * arguments that have alignment restrictions, and at least enough
+ * memory for one buffer descriptor
+ */
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(MemoryPtr != NULL);
+ XASSERT_NONVOID(((u32) MemoryPtr & 3) == 0);
+ XASSERT_NONVOID(ByteCount != 0);
+ XASSERT_NONVOID(ByteCount >= sizeof (XBufDescriptor));
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* if the scatter gather list has already been created, then return
+ * with a status
+ */
+ if (InstancePtr->TotalDescriptorCount != 0) {
+ return XST_DMA_SG_LIST_EXISTS;
+ }
+
+ /* loop thru the specified memory block and create as many buffer
+ * descriptors as possible putting each into the list which is
+ * implemented as a ring buffer, make sure not to use any memory which
+ * is not large enough for a complete buffer descriptor
+ */
+ UsedByteCount = 0;
+ while ((UsedByteCount + sizeof (XBufDescriptor)) <= ByteCount) {
+ /* setup a pointer to the next buffer descriptor in the memory and
+ * update # of used bytes to know when all of memory is used
+ */
+ BufferDescriptorPtr = (XBufDescriptor *) ((u32) MemoryPtr +
+ UsedByteCount);
+
+ /* initialize the new buffer descriptor such that it doesn't contain
+ * garbage which could be used by the DMA hardware
+ */
+ XBufDescriptor_Initialize(BufferDescriptorPtr);
+
+ /* if this is not the first buffer descriptor to be created,
+ * then link it to the last created buffer descriptor
+ */
+ if (PreviousDescriptorPtr != NULL) {
+ XBufDescriptor_SetNextPtr(PreviousDescriptorPtr,
+ BufferDescriptorPtr);
+ }
+
+ /* always keep a pointer to the last created buffer descriptor such
+ * that they can be linked together in the ring buffer
+ */
+ PreviousDescriptorPtr = BufferDescriptorPtr;
+
+ /* keep a count of the number of descriptors in the list to allow
+ * error processing to be performed
+ */
+ InstancePtr->TotalDescriptorCount++;
+
+ UsedByteCount += sizeof (XBufDescriptor);
+ }
+
+ /* connect the last buffer descriptor created and inserted in the list
+ * to the first such that a ring buffer is created
+ */
+ XBufDescriptor_SetNextPtr(BufferDescriptorPtr, StartOfListPtr);
+
+ /* initialize the ring buffer to indicate that there are no
+ * buffer descriptors in the list which point to valid data buffers
+ */
+ InstancePtr->PutPtr = BufferDescriptorPtr;
+ InstancePtr->GetPtr = BufferDescriptorPtr;
+ InstancePtr->CommitPtr = NULL;
+ InstancePtr->LastPtr = BufferDescriptorPtr;
+ InstancePtr->ActiveDescriptorCount = 0;
+
+ /* indicate the scatter gather list was successfully created */
+
+ return XST_SUCCESS;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_IsSgListEmpty
+*
+* DESCRIPTION:
+*
+* This function determines if the scatter gather list of a DMA channel is
+* empty with regard to buffer descriptors which are pointing to buffers to be
+* used for scatter gather operations.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* RETURN VALUE:
+*
+* A value of TRUE if the scatter gather list is empty, otherwise a value of
+* FALSE.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+u32
+XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr)
+{
+ /* assert to verify valid input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* if the number of descriptors which are being used in the list is zero
+ * then the list is empty
+ */
+ return (InstancePtr->ActiveDescriptorCount == 0);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_PutDescriptor
+*
+* DESCRIPTION:
+*
+* This function puts a buffer descriptor into the DMA channel scatter
+* gather list. A DMA channel maintains a list of buffer descriptors which are
+* to be processed. This function puts the specified buffer descriptor
+* at the next location in the list. Note that since the list is already intact,
+* the information in the parameter is copied into the list (rather than modify
+* list pointers on the fly).
+*
+* After buffer descriptors are put into the list, they must also be committed
+* by calling another function. This allows multiple buffer descriptors which
+* span a single packet to be put into the list while preventing the hardware
+* from starting the first buffer descriptor of the packet.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* BufferDescriptorPtr is a pointer to the buffer descriptor to be put into
+* the next available location of the scatter gather list.
+*
+* RETURN VALUE:
+*
+* A status which indicates XST_SUCCESS if the buffer descriptor was
+* successfully put into the scatter gather list.
+*
+* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
+* been created.
+*
+* A value of XST_DMA_SG_LIST_FULL indicates the buffer descriptor was not
+* put into the list because the list was full.
+*
+* A value of XST_DMA_SG_BD_LOCKED indicates the buffer descriptor was not
+* put into the list because the buffer descriptor in the list which is to
+* be overwritten was locked. A locked buffer descriptor indicates the higher
+* layered software is still using the buffer descriptor.
+*
+* NOTES:
+*
+* It is necessary to create a scatter gather list for a DMA channel before
+* putting buffer descriptors into it.
+*
+******************************************************************************/
+XStatus
+XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr,
+ XBufDescriptor * BufferDescriptorPtr)
+{
+ u32 Control;
+
+ /* assert to verify valid input arguments and alignment for those
+ * arguments that have alignment restrictions
+ */
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(BufferDescriptorPtr != NULL);
+ XASSERT_NONVOID(((u32) BufferDescriptorPtr & 3) == 0);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* if a scatter gather list has not been created yet, return a status */
+
+ if (InstancePtr->TotalDescriptorCount == 0) {
+ return XST_DMA_SG_NO_LIST;
+ }
+
+ /* if the list is full because all descriptors are pointing to valid
+ * buffers, then indicate an error, this code assumes no list or an
+ * empty list is detected above
+ */
+ if (InstancePtr->ActiveDescriptorCount ==
+ InstancePtr->TotalDescriptorCount) {
+ return XST_DMA_SG_LIST_FULL;
+ }
+
+ /* if the buffer descriptor in the list which is to be overwritten is
+ * locked, then don't overwrite it and return a status
+ */
+ if (XBufDescriptor_IsLocked(InstancePtr->PutPtr)) {
+ return XST_DMA_SG_BD_LOCKED;
+ }
+
+ /* set the scatter gather stop bit in the control word of the descriptor
+ * to cause the h/w to stop after it processes this descriptor since it
+ * will be the last in the list
+ */
+ Control = XBufDescriptor_GetControl(BufferDescriptorPtr);
+ XBufDescriptor_SetControl(BufferDescriptorPtr,
+ Control | XDC_DMACR_SG_DISABLE_MASK);
+
+ /* set both statuses in the descriptor so we tell if they are updated with
+ * the status of the transfer, the hardware should change the busy in the
+ * DMA status to be false when it completes
+ */
+ XBufDescriptor_SetStatus(BufferDescriptorPtr, XDC_DMASR_BUSY_MASK);
+ XBufDescriptor_SetDeviceStatus(BufferDescriptorPtr, 0);
+
+ /* copy the descriptor into the next position in the list so it's ready to
+ * be used by the h/w, this assumes the descriptor in the list prior to this
+ * one still has the stop bit in the control word set such that the h/w
+ * use this one yet
+ */
+ CopyBufferDescriptor(BufferDescriptorPtr, InstancePtr->PutPtr);
+
+ /* only the last in the list and the one to be committed have scatter gather
+ * disabled in the control word, a commit requires only one descriptor
+ * to be changed, when # of descriptors to commit > 2 all others except the
+ * 1st and last have scatter gather enabled
+ */
+ if ((InstancePtr->CommitPtr != InstancePtr->LastPtr) &&
+ (InstancePtr->CommitPtr != NULL)) {
+ Control = XBufDescriptor_GetControl(InstancePtr->LastPtr);
+ XBufDescriptor_SetControl(InstancePtr->LastPtr,
+ Control & ~XDC_DMACR_SG_DISABLE_MASK);
+ }
+
+ /* update the list data based upon putting a descriptor into the list,
+ * these operations must be last
+ */
+ InstancePtr->ActiveDescriptorCount++;
+
+ /* only update the commit pointer if it is not already active, this allows
+ * it to be deactivated after every commit such that a single descriptor
+ * which is committed does not appear to be waiting to be committed
+ */
+ if (InstancePtr->CommitPtr == NULL) {
+ InstancePtr->CommitPtr = InstancePtr->LastPtr;
+ }
+
+ /* these updates MUST BE LAST after the commit pointer update in order for
+ * the commit pointer to track the correct descriptor to be committed
+ */
+ InstancePtr->LastPtr = InstancePtr->PutPtr;
+ InstancePtr->PutPtr = XBufDescriptor_GetNextPtr(InstancePtr->PutPtr);
+
+ return XST_SUCCESS;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_CommitPuts
+*
+* DESCRIPTION:
+*
+* This function commits the buffer descriptors which have been put into the
+* scatter list for the DMA channel since the last commit operation was
+* performed. This enables the calling functions to put several buffer
+* descriptors into the list (e.g.,a packet's worth) before allowing the scatter
+* gather operations to start. This prevents the DMA channel hardware from
+* starting to use the buffer descriptors in the list before they are ready
+* to be used (multiple buffer descriptors for a single packet).
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* RETURN VALUE:
+*
+* A status indicating XST_SUCCESS if the buffer descriptors of the list were
+* successfully committed.
+*
+* A value of XST_DMA_SG_NOTHING_TO_COMMIT indicates that the buffer descriptors
+* were not committed because there was nothing to commit in the list. All the
+* buffer descriptors which are in the list are commited.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XDmaChannel_CommitPuts(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* if the buffer descriptor to be committed is already committed or
+ * the list is empty (none have been put in), then indicate an error
+ */
+ if ((InstancePtr->CommitPtr == NULL) ||
+ XDmaChannel_IsSgListEmpty(InstancePtr)) {
+ return XST_DMA_SG_NOTHING_TO_COMMIT;
+ }
+
+ /* last descriptor in the list must have scatter gather disabled so the end
+ * of the list is hit by h/w, if descriptor to commit is not last in list,
+ * commit descriptors by enabling scatter gather in the descriptor
+ */
+ if (InstancePtr->CommitPtr != InstancePtr->LastPtr) {
+ u32 Control;
+
+ Control = XBufDescriptor_GetControl(InstancePtr->CommitPtr);
+ XBufDescriptor_SetControl(InstancePtr->CommitPtr, Control &
+ ~XDC_DMACR_SG_DISABLE_MASK);
+ }
+ /* Update the commit pointer to indicate that there is nothing to be
+ * committed, this state is used by start processing to know that the
+ * buffer descriptor to start is not waiting to be committed
+ */
+ InstancePtr->CommitPtr = NULL;
+
+ return XST_SUCCESS;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_GetDescriptor
+*
+* DESCRIPTION:
+*
+* This function gets a buffer descriptor from the scatter gather list of the
+* DMA channel. The buffer descriptor is retrieved from the scatter gather list
+* and the scatter gather list is updated to not include the retrieved buffer
+* descriptor. This is typically done after a scatter gather operation
+* completes indicating that a data buffer has been successfully sent or data
+* has been received into the data buffer. The purpose of this function is to
+* allow the device using the scatter gather operation to get the results of the
+* operation.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* BufDescriptorPtr is a pointer to a pointer to the buffer descriptor which
+* was retrieved from the list. The buffer descriptor is not really removed
+* from the list, but it is changed to a state such that the hardware will not
+* use it again until it is put into the scatter gather list of the DMA channel.
+*
+* RETURN VALUE:
+*
+* A status indicating XST_SUCCESS if a buffer descriptor was retrieved from
+* the scatter gather list of the DMA channel.
+*
+* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
+* been created.
+*
+* A value of XST_DMA_SG_LIST_EMPTY indicates no buffer descriptor was
+* retrieved from the list because there are no buffer descriptors to be
+* processed in the list.
+*
+* BufDescriptorPtr is updated to point to the buffer descriptor which was
+* retrieved from the list if the status indicates success.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr,
+ XBufDescriptor ** BufDescriptorPtr)
+{
+ u32 Control;
+
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(BufDescriptorPtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* if a scatter gather list has not been created yet, return a status */
+
+ if (InstancePtr->TotalDescriptorCount == 0) {
+ return XST_DMA_SG_NO_LIST;
+ }
+
+ /* if the buffer descriptor list is empty, then indicate an error */
+
+ if (XDmaChannel_IsSgListEmpty(InstancePtr)) {
+ return XST_DMA_SG_LIST_EMPTY;
+ }
+
+ /* retrieve the next buffer descriptor which is ready to be processed from
+ * the buffer descriptor list for the DMA channel, set the control word
+ * such that hardware will stop after the descriptor has been processed
+ */
+ Control = XBufDescriptor_GetControl(InstancePtr->GetPtr);
+ XBufDescriptor_SetControl(InstancePtr->GetPtr,
+ Control | XDC_DMACR_SG_DISABLE_MASK);
+
+ /* set the input argument, which is also an output, to point to the
+ * buffer descriptor which is to be retrieved from the list
+ */
+ *BufDescriptorPtr = InstancePtr->GetPtr;
+
+ /* update the pointer of the DMA channel to reflect the buffer descriptor
+ * was retrieved from the list by setting it to the next buffer descriptor
+ * in the list and indicate one less descriptor in the list now
+ */
+ InstancePtr->GetPtr = XBufDescriptor_GetNextPtr(InstancePtr->GetPtr);
+ InstancePtr->ActiveDescriptorCount--;
+
+ return XST_SUCCESS;
+}
+
+/*********************** Interrupt Collescing Functions **********************/
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_GetPktCount
+*
+* DESCRIPTION:
+*
+* This function returns the value of the unserviced packet count register of
+* the DMA channel. This count represents the number of packets that have been
+* sent or received by the hardware, but not processed by software.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* RETURN VALUE:
+*
+* The unserviced packet counter register contents for the DMA channel.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+u32
+XDmaChannel_GetPktCount(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* get the unserviced packet count from the register and return it */
+
+ return XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_DecrementPktCount
+*
+* DESCRIPTION:
+*
+* This function decrements the value of the unserviced packet count register.
+* This informs the hardware that the software has processed a packet. The
+* unserviced packet count register may only be decremented by one in the
+* hardware.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+void
+XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr)
+{
+ u32 Register;
+
+ /* assert to verify input arguments */
+
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* if the unserviced packet count register can be decremented (rather
+ * than rolling over) decrement it by writing a 1 to the register,
+ * this is the only valid write to the register as it serves as an
+ * acknowledge that a packet was handled by the software
+ */
+ Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET);
+ if (Register > 0) {
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET,
+ 1UL);
+ }
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_SetPktThreshold
+*
+* DESCRIPTION:
+*
+* This function sets the value of the packet count threshold register of the
+* DMA channel. It reflects the number of packets that must be sent or
+* received before generating an interrupt. This value helps implement
+* a concept called "interrupt coalescing", which is used to reduce the number
+* of interrupts from devices with high data rates.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* Threshold is the value that is written to the threshold register of the
+* DMA channel.
+*
+* RETURN VALUE:
+*
+* A status containing XST_SUCCESS if the packet count threshold was
+* successfully set.
+*
+* NOTES:
+*
+* The packet threshold could be set to larger than the number of descriptors
+* allocated to the DMA channel. In this case, the wait bound will take over
+* and always indicate data arrival. There was a check in this function that
+* returned an error if the treshold was larger than the number of descriptors,
+* but that was removed because users would then have to set the threshold
+* only after they set descriptor space, which is an order dependency that
+* caused confustion.
+*
+******************************************************************************/
+XStatus
+XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold)
+{
+ /* assert to verify input arguments, don't assert the threshold since
+ * it's range is unknown
+ */
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* set the packet count threshold in the register such that an interrupt
+ * may be generated, if enabled, when the packet count threshold is
+ * reached or exceeded
+ */
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET,
+ (u32) Threshold);
+
+ /* indicate the packet count threshold was successfully set */
+
+ return XST_SUCCESS;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_GetPktThreshold
+*
+* DESCRIPTION:
+*
+* This function gets the value of the packet count threshold register of the
+* DMA channel. This value reflects the number of packets that must be sent or
+* received before generating an interrupt. This value helps implement a concept
+* called "interrupt coalescing", which is used to reduce the number of
+* interrupts from devices with high data rates.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* RETURN VALUE:
+*
+* The packet threshold register contents for the DMA channel and is a value in
+* the range 0 - 1023. A value of 0 indicates the packet wait bound timer is
+* disabled.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+u8
+XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* get the packet count threshold from the register and return it,
+ * since only 8 bits are used, cast it to return only those bits */
+
+ return (u8) XIo_In32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_SetPktWaitBound
+*
+* DESCRIPTION:
+*
+* This function sets the value of the packet wait bound register of the
+* DMA channel. This value reflects the timer value used to trigger an
+* interrupt when not enough packets have been received to reach the packet
+* count threshold.
+*
+* The timer is in millisecond units with +/- 33% accuracy.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* WaitBound is the value, in milliseconds, to be stored in the wait bound
+* register of the DMA channel and is a value in the range 0 - 1023. A value
+* of 0 disables the packet wait bound timer.
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+void
+XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(WaitBound < 1024);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* set the packet wait bound in the register such that interrupt may be
+ * generated, if enabled, when packets have not been handled for a specific
+ * amount of time
+ */
+ XIo_Out32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET, WaitBound);
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XDmaChannel_GetPktWaitBound
+*
+* DESCRIPTION:
+*
+* This function gets the value of the packet wait bound register of the
+* DMA channel. This value contains the timer value used to trigger an
+* interrupt when not enough packets have been received to reach the packet
+* count threshold.
+*
+* The timer is in millisecond units with +/- 33% accuracy.
+*
+* ARGUMENTS:
+*
+* InstancePtr contains a pointer to the DMA channel to operate on. The DMA
+* channel should be configured to use scatter gather in order for this function
+* to be called.
+*
+* RETURN VALUE:
+*
+* The packet wait bound register contents for the DMA channel.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+u32
+XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* get the packet wait bound from the register and return it */
+
+ return XIo_In32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET);
+}
diff --git a/board/xilinx/common/xio.h b/board/xilinx/common/xio.h
new file mode 100644
index 0000000..5bb09c8
--- /dev/null
+++ b/board/xilinx/common/xio.h
@@ -0,0 +1,81 @@
+/*
+ * xio.h
+ *
+ * Defines XIo functions for Xilinx OCP in terms of Linux primitives
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef XIO_H
+#define XIO_H
+
+#include "xbasic_types.h"
+#include <asm/io.h>
+
+typedef u32 XIo_Address;
+
+extern inline u8
+XIo_In8(XIo_Address InAddress)
+{
+ return (u8) in_8((volatile unsigned char *) InAddress);
+}
+extern inline u16
+XIo_In16(XIo_Address InAddress)
+{
+ return (u16) in_be16((volatile unsigned short *) InAddress);
+}
+extern inline u32
+XIo_In32(XIo_Address InAddress)
+{
+ return (u32) in_be32((volatile unsigned *) InAddress);
+}
+extern inline void
+XIo_Out8(XIo_Address OutAddress, u8 Value)
+{
+ out_8((volatile unsigned char *) OutAddress, Value);
+}
+extern inline void
+XIo_Out16(XIo_Address OutAddress, u16 Value)
+{
+ out_be16((volatile unsigned short *) OutAddress, Value);
+}
+extern inline void
+XIo_Out32(XIo_Address OutAddress, u32 Value)
+{
+ out_be32((volatile unsigned *) OutAddress, Value);
+}
+
+#define XIo_ToLittleEndian16(s,d) (*(u16*)(d) = cpu_to_le16((u16)(s)))
+#define XIo_ToLittleEndian32(s,d) (*(u32*)(d) = cpu_to_le32((u32)(s)))
+#define XIo_ToBigEndian16(s,d) (*(u16*)(d) = cpu_to_be16((u16)(s)))
+#define XIo_ToBigEndian32(s,d) (*(u32*)(d) = cpu_to_be32((u32)(s)))
+
+#define XIo_FromLittleEndian16(s,d) (*(u16*)(d) = le16_to_cpu((u16)(s)))
+#define XIo_FromLittleEndian32(s,d) (*(u32*)(d) = le32_to_cpu((u32)(s)))
+#define XIo_FromBigEndian16(s,d) (*(u16*)(d) = be16_to_cpu((u16)(s)))
+#define XIo_FromBigEndian32(s,d) (*(u32*)(d) = be32_to_cpu((u32)(s)))
+
+#endif /* XIO_H */
diff --git a/board/xilinx/common/xipif_v1_23_b.h b/board/xilinx/common/xipif_v1_23_b.h
new file mode 100644
index 0000000..b1520e9
--- /dev/null
+++ b/board/xilinx/common/xipif_v1_23_b.h
@@ -0,0 +1,763 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/******************************************************************************
+*
+* FILENAME:
+*
+* xipif.h
+*
+* DESCRIPTION:
+*
+* The XIpIf component encapsulates the IPIF, which is the standard interface
+* that IP must adhere to when connecting to a bus. The purpose of this
+* component is to encapsulate the IPIF processing such that maintainability
+* is increased. This component does not provide a lot of abstraction from
+* from the details of the IPIF as it is considered a building block for
+* device drivers. A device driver designer must be familiar with the
+* details of the IPIF hardware to use this component.
+*
+* The IPIF hardware provides a building block for all hardware devices such
+* that each device does not need to reimplement these building blocks. The
+* IPIF contains other building blocks, such as FIFOs and DMA channels, which
+* are also common to many devices. These blocks are implemented as separate
+* hardware blocks and instantiated within the IPIF. The primary hardware of
+* the IPIF which is implemented by this software component is the interrupt
+* architecture. Since there are many blocks of a device which may generate
+* interrupts, all the interrupt processing is contained in the common part
+* of the device, the IPIF. This interrupt processing is for the device level
+* only and does not include any processing for the interrupt controller.
+*
+* A device is a mechanism such as an Ethernet MAC. The device is made
+* up of several parts which include an IPIF and the IP. The IPIF contains most
+* of the device infrastructure which is common to all devices, such as
+* interrupt processing, DMA channels, and FIFOs. The infrastructure may also
+* be referred to as IPIF internal blocks since they are part of the IPIF and
+* are separate blocks that can be selected based upon the needs of the device.
+* The IP of the device is the logic that is unique to the device and interfaces
+* to the IPIF of the device.
+*
+* In general, there are two levels of registers within the IPIF. The first
+* level, referred to as the device level, contains registers which are for the
+* entire device. The second level, referred to as the IP level, contains
+* registers which are specific to the IP of the device. The two levels of
+* registers are designed to be hierarchical such that the device level is
+* is a more general register set above the more specific registers of the IP.
+* The IP level of registers provides functionality which is typically common
+* across all devices and allows IP designers to focus on the unique aspects
+* of the IP.
+*
+* Critical Sections
+*
+* It is the responsibility of the device driver designer to use critical
+* sections as necessary when calling functions of the IPIF. This component
+* does not use critical sections and it does access registers using
+* read-modify-write operations. Calls to IPIF functions from a main thread
+* and from an interrupt context could produce unpredictable behavior such that
+* the caller must provide the appropriate critical sections.
+*
+* Mutual Exclusion
+*
+* The functions of the IPIF are not thread safe such that the caller of all
+* functions is responsible for ensuring mutual exclusion for an IPIF. Mutual
+* exclusion across multiple IPIF components is not necessary.
+*
+* NOTES:
+*
+* None.
+*
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.23b jhl 02/27/01 Repartioned to minimize size
+*
+******************************************************************************/
+
+#ifndef XIPIF_H /* prevent circular inclusions */
+#define XIPIF_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+#include "xbasic_types.h"
+#include "xstatus.h"
+#include "xversion.h"
+
+/************************** Constant Definitions *****************************/
+
+/* the following constants define the register offsets for the registers of the
+ * IPIF, there are some holes in the memory map for reserved addresses to allow
+ * other registers to be added and still match the memory map of the interrupt
+ * controller registers
+ */
+#define XIIF_V123B_DISR_OFFSET 0UL /* device interrupt status register */
+#define XIIF_V123B_DIPR_OFFSET 4UL /* device interrupt pending register */
+#define XIIF_V123B_DIER_OFFSET 8UL /* device interrupt enable register */
+#define XIIF_V123B_DIIR_OFFSET 24UL /* device interrupt ID register */
+#define XIIF_V123B_DGIER_OFFSET 28UL /* device global interrupt enable reg */
+#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */
+#define XIIF_V123B_IIER_OFFSET 40UL /* IP interrupt enable register */
+#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */
+
+#define XIIF_V123B_RESET_MASK 0xAUL
+
+/* the following constant is used for the device global interrupt enable
+ * register, to enable all interrupts for the device, this is the only bit
+ * in the register
+ */
+#define XIIF_V123B_GINTR_ENABLE_MASK 0x80000000UL
+
+/* the following constants contain the masks to identify each internal IPIF
+ * condition in the device registers of the IPIF, interrupts are assigned
+ * in the register from LSB to the MSB
+ */
+#define XIIF_V123B_ERROR_MASK 1UL /* LSB of the register */
+
+/* The following constants contain interrupt IDs which identify each internal
+ * IPIF condition, this value must correlate with the mask constant for the
+ * error
+ */
+#define XIIF_V123B_ERROR_INTERRUPT_ID 0 /* interrupt bit #, (LSB = 0) */
+#define XIIF_V123B_NO_INTERRUPT_ID 128 /* no interrupts are pending */
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_RESET
+*
+* DESCRIPTION:
+*
+* Reset the IPIF component and hardware. This is a destructive operation that
+* could cause the loss of data since resetting the IPIF of a device also
+* resets the device using the IPIF and any blocks, such as FIFOs or DMA
+* channels, within the IPIF. All registers of the IPIF will contain their
+* reset value when this function returns.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+
+/* the following constant is used in the reset register to cause the IPIF to
+ * reset
+ */
+#define XIIF_V123B_RESET(RegBaseAddress) \
+ XIo_Out32(RegBaseAddress + XIIF_V123B_RESETR_OFFSET, XIIF_V123B_RESET_MASK)
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_WRITE_DISR
+*
+* DESCRIPTION:
+*
+* This function sets the device interrupt status register to the value.
+* This register indicates the status of interrupt sources for a device
+* which contains the IPIF. The status is independent of whether interrupts
+* are enabled and could be used for polling a device at a higher level rather
+* than a more detailed level.
+*
+* Each bit of the register correlates to a specific interrupt source within the
+* device which contains the IPIF. With the exception of some internal IPIF
+* conditions, the contents of this register are not latched but indicate
+* the live status of the interrupt sources within the device. Writing any of
+* the non-latched bits of the register will have no effect on the register.
+*
+* For the latched bits of this register only, setting a bit which is zero
+* within this register causes an interrupt to generated. The device global
+* interrupt enable register and the device interrupt enable register must be set
+* appropriately to allow an interrupt to be passed out of the device. The
+* interrupt is cleared by writing to this register with the bits to be
+* cleared set to a one and all others to zero. This register implements a
+* toggle on write functionality meaning any bits which are set in the value
+* written cause the bits in the register to change to the opposite state.
+*
+* This function writes the specified value to the register such that
+* some bits may be set and others cleared. It is the caller's responsibility
+* to get the value of the register prior to setting the value to prevent a
+* destructive behavior.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* Status contains the value to be written to the interrupt status register of
+* the device. The only bits which can be written are the latched bits which
+* contain the internal IPIF conditions. The following values may be used to
+* set the status register or clear an interrupt condition.
+*
+* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_WRITE_DISR(RegBaseAddress, Status) \
+ XIo_Out32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET, (Status))
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_READ_DISR
+*
+* DESCRIPTION:
+*
+* This function gets the device interrupt status register contents.
+* This register indicates the status of interrupt sources for a device
+* which contains the IPIF. The status is independent of whether interrupts
+* are enabled and could be used for polling a device at a higher level.
+*
+* Each bit of the register correlates to a specific interrupt source within the
+* device which contains the IPIF. With the exception of some internal IPIF
+* conditions, the contents of this register are not latched but indicate
+* the live status of the interrupt sources within the device.
+*
+* For only the latched bits of this register, the interrupt may be cleared by
+* writing to these bits in the status register.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* A status which contains the value read from the interrupt status register of
+* the device. The bit definitions are specific to the device with
+* the exception of the latched internal IPIF condition bits. The following
+* values may be used to detect internal IPIF conditions in the status.
+*
+* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_READ_DISR(RegBaseAddress) \
+ XIo_In32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET)
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_WRITE_DIER
+*
+* DESCRIPTION:
+*
+* This function sets the device interrupt enable register contents.
+* This register controls which interrupt sources of the device are allowed to
+* generate an interrupt. The device global interrupt enable register must also
+* be set appropriately for an interrupt to be passed out of the device.
+*
+* Each bit of the register correlates to a specific interrupt source within the
+* device which contains the IPIF. Setting a bit in this register enables that
+* interrupt source to generate an interrupt. Clearing a bit in this register
+* disables interrupt generation for that interrupt source.
+*
+* This function writes only the specified value to the register such that
+* some interrupts source may be enabled and others disabled. It is the
+* caller's responsibility to get the value of the interrupt enable register
+* prior to setting the value to prevent an destructive behavior.
+*
+* An interrupt source may not be enabled to generate an interrupt, but can
+* still be polled in the interrupt status register.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* Enable contains the value to be written to the interrupt enable register
+* of the device. The bit definitions are specific to the device with
+* the exception of the internal IPIF conditions. The following
+* values may be used to enable the internal IPIF conditions interrupts.
+*
+* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* Signature: u32 XIIF_V123B_WRITE_DIER(u32 RegBaseAddress,
+* u32 Enable)
+*
+******************************************************************************/
+#define XIIF_V123B_WRITE_DIER(RegBaseAddress, Enable) \
+ XIo_Out32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET, (Enable))
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_READ_DIER
+*
+* DESCRIPTION:
+*
+* This function gets the device interrupt enable register contents.
+* This register controls which interrupt sources of the device
+* are allowed to generate an interrupt. The device global interrupt enable
+* register and the device interrupt enable register must also be set
+* appropriately for an interrupt to be passed out of the device.
+*
+* Each bit of the register correlates to a specific interrupt source within the
+* device which contains the IPIF. Setting a bit in this register enables that
+* interrupt source to generate an interrupt if the global enable is set
+* appropriately. Clearing a bit in this register disables interrupt generation
+* for that interrupt source regardless of the global interrupt enable.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* The value read from the interrupt enable register of the device. The bit
+* definitions are specific to the device with the exception of the internal
+* IPIF conditions. The following values may be used to determine from the
+* value if the internal IPIF conditions interrupts are enabled.
+*
+* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_READ_DIER(RegBaseAddress) \
+ XIo_In32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET)
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_READ_DIPR
+*
+* DESCRIPTION:
+*
+* This function gets the device interrupt pending register contents.
+* This register indicates the pending interrupt sources, those that are waiting
+* to be serviced by the software, for a device which contains the IPIF.
+* An interrupt must be enabled in the interrupt enable register of the IPIF to
+* be pending.
+*
+* Each bit of the register correlates to a specific interrupt source within the
+* the device which contains the IPIF. With the exception of some internal IPIF
+* conditions, the contents of this register are not latched since the condition
+* is latched in the IP interrupt status register, by an internal block of the
+* IPIF such as a FIFO or DMA channel, or by the IP of the device. This register
+* is read only and is not latched, but it is necessary to acknowledge (clear)
+* the interrupt condition by performing the appropriate processing for the IP
+* or block within the IPIF.
+*
+* This register can be thought of as the contents of the interrupt status
+* register ANDed with the contents of the interrupt enable register.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* The value read from the interrupt pending register of the device. The bit
+* definitions are specific to the device with the exception of the latched
+* internal IPIF condition bits. The following values may be used to detect
+* internal IPIF conditions in the value.
+*
+* XIIF_V123B_ERROR_MASK Indicates a device error in the IPIF
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_READ_DIPR(RegBaseAddress) \
+ XIo_In32((RegBaseAddress) + XIIF_V123B_DIPR_OFFSET)
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_READ_DIIR
+*
+* DESCRIPTION:
+*
+* This function gets the device interrupt ID for the highest priority interrupt
+* which is pending from the interrupt ID register. This function provides
+* priority resolution such that faster interrupt processing is possible.
+* Without priority resolution, it is necessary for the software to read the
+* interrupt pending register and then check each interrupt source to determine
+* if an interrupt is pending. Priority resolution becomes more important as the
+* number of interrupt sources becomes larger.
+*
+* Interrupt priorities are based upon the bit position of the interrupt in the
+* interrupt pending register with bit 0 being the highest priority. The
+* interrupt ID is the priority of the interrupt, 0 - 31, with 0 being the
+* highest priority. The interrupt ID register is live rather than latched such
+* that multiple calls to this function may not yield the same results. A
+* special value, outside of the interrupt priority range of 0 - 31, is
+* contained in the register which indicates that no interrupt is pending. This
+* may be useful for allowing software to continue processing interrupts in a
+* loop until there are no longer any interrupts pending.
+*
+* The interrupt ID is designed to allow a function pointer table to be used
+* in the software such that the interrupt ID is used as an index into that
+* table. The function pointer table could contain an instance pointer, such
+* as to DMA channel, and a function pointer to the function which handles
+* that interrupt. This design requires the interrupt processing of the device
+* driver to be partitioned into smaller more granular pieces based upon
+* hardware used by the device, such as DMA channels and FIFOs.
+*
+* It is not mandatory that this function be used by the device driver software.
+* It may choose to read the pending register and resolve the pending interrupt
+* priorities on it's own.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* An interrupt ID, 0 - 31, which identifies the highest priority interrupt
+* which is pending. A value of XIIF_NO_INTERRUPT_ID indicates that there is
+* no interrupt pending. The following values may be used to identify the
+* interrupt ID for the internal IPIF interrupts.
+*
+* XIIF_V123B_ERROR_INTERRUPT_ID Indicates a device error in the IPIF
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_READ_DIIR(RegBaseAddress) \
+ XIo_In32((RegBaseAddress) + XIIF_V123B_DIIR_OFFSET)
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_GLOBAL_INTR_DISABLE
+*
+* DESCRIPTION:
+*
+* This function disables all interrupts for the device by writing to the global
+* interrupt enable register. This register provides the ability to disable
+* interrupts without any modifications to the interrupt enable register such
+* that it is minimal effort to restore the interrupts to the previous enabled
+* state. The corresponding function, XIpIf_GlobalIntrEnable, is provided to
+* restore the interrupts to the previous enabled state. This function is
+* designed to be used in critical sections of device drivers such that it is
+* not necessary to disable other device interrupts.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_GINTR_DISABLE(RegBaseAddress) \
+ XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, 0)
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_GINTR_ENABLE
+*
+* DESCRIPTION:
+*
+* This function writes to the global interrupt enable register to enable
+* interrupts from the device. This register provides the ability to enable
+* interrupts without any modifications to the interrupt enable register such
+* that it is minimal effort to restore the interrupts to the previous enabled
+* state. This function does not enable individual interrupts as the interrupt
+* enable register must be set appropriately. This function is designed to be
+* used in critical sections of device drivers such that it is not necessary to
+* disable other device interrupts.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_GINTR_ENABLE(RegBaseAddress) \
+ XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, \
+ XIIF_V123B_GINTR_ENABLE_MASK)
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_IS_GINTR_ENABLED
+*
+* DESCRIPTION:
+*
+* This function determines if interrupts are enabled at the global level by
+* reading the gloabl interrupt register. This register provides the ability to
+* disable interrupts without any modifications to the interrupt enable register
+* such that it is minimal effort to restore the interrupts to the previous
+* enabled state.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* TRUE if interrupts are enabled for the IPIF, FALSE otherwise.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_IS_GINTR_ENABLED(RegBaseAddress) \
+ (XIo_In32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET) == \
+ XIIF_V123B_GINTR_ENABLE_MASK)
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_WRITE_IISR
+*
+* DESCRIPTION:
+*
+* This function sets the IP interrupt status register to the specified value.
+* This register indicates the status of interrupt sources for the IP of the
+* device. The IP is defined as the part of the device that connects to the
+* IPIF. The status is independent of whether interrupts are enabled such that
+* the status register may also be polled when interrupts are not enabled.
+*
+* Each bit of the register correlates to a specific interrupt source within the
+* IP. All bits of this register are latched. Setting a bit which is zero
+* within this register causes an interrupt to be generated. The device global
+* interrupt enable register and the device interrupt enable register must be set
+* appropriately to allow an interrupt to be passed out of the device. The
+* interrupt is cleared by writing to this register with the bits to be
+* cleared set to a one and all others to zero. This register implements a
+* toggle on write functionality meaning any bits which are set in the value
+* written cause the bits in the register to change to the opposite state.
+*
+* This function writes only the specified value to the register such that
+* some status bits may be set and others cleared. It is the caller's
+* responsibility to get the value of the register prior to setting the value
+* to prevent an destructive behavior.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* Status contains the value to be written to the IP interrupt status
+* register. The bit definitions are specific to the device IP.
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_WRITE_IISR(RegBaseAddress, Status) \
+ XIo_Out32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET, (Status))
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_READ_IISR
+*
+* DESCRIPTION:
+*
+* This function gets the contents of the IP interrupt status register.
+* This register indicates the status of interrupt sources for the IP of the
+* device. The IP is defined as the part of the device that connects to the
+* IPIF. The status is independent of whether interrupts are enabled such
+* that the status register may also be polled when interrupts are not enabled.
+*
+* Each bit of the register correlates to a specific interrupt source within the
+* device. All bits of this register are latched. Writing a 1 to a bit within
+* this register causes an interrupt to be generated if enabled in the interrupt
+* enable register and the global interrupt enable is set. Since the status is
+* latched, each status bit must be acknowledged in order for the bit in the
+* status register to be updated. Each bit can be acknowledged by writing a
+* 0 to the bit in the status register.
+
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* A status which contains the value read from the IP interrupt status register.
+* The bit definitions are specific to the device IP.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_READ_IISR(RegBaseAddress) \
+ XIo_In32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET)
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_WRITE_IIER
+*
+* DESCRIPTION:
+*
+* This function sets the IP interrupt enable register contents. This register
+* controls which interrupt sources of the IP are allowed to generate an
+* interrupt. The global interrupt enable register and the device interrupt
+* enable register must also be set appropriately for an interrupt to be
+* passed out of the device containing the IPIF and the IP.
+*
+* Each bit of the register correlates to a specific interrupt source within the
+* IP. Setting a bit in this register enables the interrupt source to generate
+* an interrupt. Clearing a bit in this register disables interrupt generation
+* for that interrupt source.
+*
+* This function writes only the specified value to the register such that
+* some interrupt sources may be enabled and others disabled. It is the
+* caller's responsibility to get the value of the interrupt enable register
+* prior to setting the value to prevent an destructive behavior.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* Enable contains the value to be written to the IP interrupt enable register.
+* The bit definitions are specific to the device IP.
+*
+* RETURN VALUE:
+*
+* None.
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+#define XIIF_V123B_WRITE_IIER(RegBaseAddress, Enable) \
+ XIo_Out32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET, (Enable))
+
+/******************************************************************************
+*
+* MACRO:
+*
+* XIIF_V123B_READ_IIER
+*
+* DESCRIPTION:
+*
+*
+* This function gets the IP interrupt enable register contents. This register
+* controls which interrupt sources of the IP are allowed to generate an
+* interrupt. The global interrupt enable register and the device interrupt
+* enable register must also be set appropriately for an interrupt to be
+* passed out of the device containing the IPIF and the IP.
+*
+* Each bit of the register correlates to a specific interrupt source within the
+* IP. Setting a bit in this register enables the interrupt source to generate
+* an interrupt. Clearing a bit in this register disables interrupt generation
+* for that interrupt source.
+*
+* ARGUMENTS:
+*
+* RegBaseAddress contains the base address of the IPIF registers.
+*
+* RETURN VALUE:
+*
+* The contents read from the IP interrupt enable register. The bit definitions
+* are specific to the device IP.
+*
+* NOTES:
+*
+* Signature: u32 XIIF_V123B_READ_IIER(u32 RegBaseAddress)
+*
+******************************************************************************/
+#define XIIF_V123B_READ_IIER(RegBaseAddress) \
+ XIo_In32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET)
+
+/************************** Function Prototypes ******************************/
+
+/*
+ * Initialization Functions
+ */
+XStatus XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth);
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.c b/board/xilinx/common/xpacket_fifo_v1_00_b.c
new file mode 100644
index 0000000..ae2d6d4
--- /dev/null
+++ b/board/xilinx/common/xpacket_fifo_v1_00_b.c
@@ -0,0 +1,448 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/*
+*
+* @file xpacket_fifo_v1_00_b.c
+*
+* Contains functions for the XPacketFifoV100b component. See xpacket_fifo_v1_00_b.h
+* for more information about the component.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00b rpm 03/26/02 First release
+* </pre>
+*
+*****************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xio.h"
+#include "xstatus.h"
+#include "xpacket_fifo_v1_00_b.h"
+
+/************************** Constant Definitions *****************************/
+
+/* width of a FIFO word */
+
+#define XPF_FIFO_WIDTH_BYTE_COUNT 4UL
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************* Variable Definitions ******************************/
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/*
+*
+* This function initializes a packet FIFO. Initialization resets the
+* FIFO such that it's empty and ready to use.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+* @param RegBaseAddress contains the base address of the registers for
+* the packet FIFO.
+* @param DataBaseAddress contains the base address of the data for
+* the packet FIFO.
+*
+* @return
+*
+* Always returns XST_SUCCESS.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
+ u32 RegBaseAddress, u32 DataBaseAddress)
+{
+ /* assert to verify input argument are valid */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+
+ /* initialize the component variables to the specified state */
+
+ InstancePtr->RegBaseAddress = RegBaseAddress;
+ InstancePtr->DataBaseAddress = DataBaseAddress;
+ InstancePtr->IsReady = XCOMPONENT_IS_READY;
+
+ /* reset the FIFO such that it's empty and ready to use and indicate the
+ * initialization was successful, note that the is ready variable must be
+ * set prior to calling the reset function to prevent an assert
+ */
+ XPF_V100B_RESET(InstancePtr);
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/*
+*
+* This function performs a self-test on the specified packet FIFO. The self
+* test resets the FIFO and reads a register to determine if it is the correct
+* reset value. This test is destructive in that any data in the FIFO will
+* be lost.
+*
+* @param InstancePtr is a pointer to the packet FIFO to be operated on.
+*
+* @param FifoType specifies the type of FIFO, read or write, for the self test.
+* The FIFO type is specified by the values XPF_READ_FIFO_TYPE or
+* XPF_WRITE_FIFO_TYPE.
+*
+* @return
+*
+* XST_SUCCESS is returned if the selftest is successful, or
+* XST_PFIFO_BAD_REG_VALUE indicating that the value readback from the
+* occupancy/vacancy count register after a reset does not match the
+* specified reset value.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType)
+{
+ u32 Register;
+
+ /* assert to verify valid input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID((FifoType == XPF_READ_FIFO_TYPE) ||
+ (FifoType == XPF_WRITE_FIFO_TYPE));
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* reset the fifo and then check to make sure the occupancy/vacancy
+ * register contents are correct for a reset condition
+ */
+ XPF_V100B_RESET(InstancePtr);
+
+ Register = XIo_In32(InstancePtr->RegBaseAddress +
+ XPF_COUNT_STATUS_REG_OFFSET);
+
+ /* check the value of the register to ensure that it's correct for the
+ * specified FIFO type since both FIFO types reset to empty, but a bit
+ * in the register changes definition based upon FIFO type
+ */
+
+ if (FifoType == XPF_READ_FIFO_TYPE) {
+ /* check the regiser value for a read FIFO which should be empty */
+
+ if (Register != XPF_EMPTY_FULL_MASK) {
+ return XST_PFIFO_BAD_REG_VALUE;
+ }
+ } else {
+ /* check the register value for a write FIFO which should not be full
+ * on reset
+ */
+ if ((Register & XPF_EMPTY_FULL_MASK) != 0) {
+ return XST_PFIFO_BAD_REG_VALUE;
+ }
+ }
+
+ /* the test was successful */
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/*
+*
+* Read data from a FIFO and puts it into a specified buffer. The packet FIFO is
+* currently 32 bits wide such that an input buffer which is a series of bytes
+* is filled from the FIFO a word at a time. If the requested byte count is not
+* a multiple of 32 bit words, it is necessary for this function to format the
+* remaining 32 bit word from the FIFO into a series of bytes in the buffer.
+* There may be up to 3 extra bytes which must be extracted from the last word
+* of the FIFO and put into the buffer.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+* @param BufferPtr points to the memory buffer to write the data into. This
+* buffer must be 32 bit aligned or an alignment exception could be
+* generated. Since this buffer is a byte buffer, the data is assumed to
+* be endian independent.
+* @param ByteCount contains the number of bytes to read from the FIFO. This
+* number of bytes must be present in the FIFO or an error will be
+* returned.
+*
+* @return
+*
+* XST_SUCCESS indicates the operation was successful. If the number of
+* bytes specified by the byte count is not present in the FIFO
+* XST_PFIFO_LACK_OF_DATA is returned.
+*
+* If the function was successful, the specified buffer is modified to contain
+* the bytes which were removed from the FIFO.
+*
+* @note
+*
+* Note that the exact number of bytes which are present in the FIFO is
+* not known by this function. It can only check for a number of 32 bit
+* words such that if the byte count specified is incorrect, but is still
+* possible based on the number of words in the FIFO, up to 3 garbage bytes
+* may be present at the end of the buffer.
+* <br><br>
+* This function assumes that if the device consuming data from the FIFO is
+* a byte device, the order of the bytes to be consumed is from the most
+* significant byte to the least significant byte of a 32 bit word removed
+* from the FIFO.
+*
+******************************************************************************/
+XStatus
+XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
+ u8 * BufferPtr, u32 ByteCount)
+{
+ u32 FifoCount;
+ u32 WordCount;
+ u32 ExtraByteCount;
+ u32 *WordBuffer = (u32 *) BufferPtr;
+
+ /* assert to verify valid input arguments including 32 bit alignment of
+ * the buffer pointer
+ */
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(BufferPtr != NULL);
+ XASSERT_NONVOID(((u32) BufferPtr &
+ (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0);
+ XASSERT_NONVOID(ByteCount != 0);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* get the count of how many 32 bit words are in the FIFO, if there aren't
+ * enought words to satisfy the request, return an error
+ */
+
+ FifoCount = XIo_In32(InstancePtr->RegBaseAddress +
+ XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
+
+ if ((FifoCount * XPF_FIFO_WIDTH_BYTE_COUNT) < ByteCount) {
+ return XST_PFIFO_LACK_OF_DATA;
+ }
+
+ /* calculate the number of words to read from the FIFO before the word
+ * containing the extra bytes, and calculate the number of extra bytes
+ * the extra bytes are defined as those at the end of the buffer when
+ * the buffer does not end on a 32 bit boundary
+ */
+ WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT;
+ ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT;
+
+ /* Read the 32 bit words from the FIFO for all the buffer except the
+ * last word which contains the extra bytes, the following code assumes
+ * that the buffer is 32 bit aligned, otherwise an alignment exception could
+ * be generated
+ */
+ for (FifoCount = 0; FifoCount < WordCount; FifoCount++) {
+ WordBuffer[FifoCount] = XIo_In32(InstancePtr->DataBaseAddress);
+ }
+
+ /* if there are extra bytes to handle, read the last word from the FIFO
+ * and insert the extra bytes into the buffer
+ */
+ if (ExtraByteCount > 0) {
+ u32 LastWord;
+ u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount);
+
+ /* get the last word from the FIFO for the extra bytes */
+
+ LastWord = XIo_In32(InstancePtr->DataBaseAddress);
+
+ /* one extra byte in the last word, put the byte into the next location
+ * of the buffer, bytes in a word of the FIFO are ordered from most
+ * significant byte to least
+ */
+ if (ExtraByteCount == 1) {
+ ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
+ }
+
+ /* two extra bytes in the last word, put each byte into the next two
+ * locations of the buffer
+ */
+ else if (ExtraByteCount == 2) {
+ ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
+ ExtraBytesBuffer[1] = (u8) (LastWord >> 16);
+ }
+ /* three extra bytes in the last word, put each byte into the next three
+ * locations of the buffer
+ */
+ else if (ExtraByteCount == 3) {
+ ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
+ ExtraBytesBuffer[1] = (u8) (LastWord >> 16);
+ ExtraBytesBuffer[2] = (u8) (LastWord >> 8);
+ }
+ }
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/*
+*
+* Write data into a packet FIFO. The packet FIFO is currently 32 bits wide
+* such that an input buffer which is a series of bytes must be written into the
+* FIFO a word at a time. If the buffer is not a multiple of 32 bit words, it is
+* necessary for this function to format the remaining bytes into a single 32
+* bit word to be inserted into the FIFO. This is necessary to avoid any
+* accesses past the end of the buffer.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+* @param BufferPtr points to the memory buffer that data is to be read from
+* and written into the FIFO. Since this buffer is a byte buffer, the data
+* is assumed to be endian independent. This buffer must be 32 bit aligned
+* or an alignment exception could be generated.
+* @param ByteCount contains the number of bytes to read from the buffer and to
+* write to the FIFO.
+*
+* @return
+*
+* XST_SUCCESS is returned if the operation succeeded. If there is not enough
+* room in the FIFO to hold the specified bytes, XST_PFIFO_NO_ROOM is
+* returned.
+*
+* @note
+*
+* This function assumes that if the device inserting data into the FIFO is
+* a byte device, the order of the bytes in each 32 bit word is from the most
+* significant byte to the least significant byte.
+*
+******************************************************************************/
+XStatus
+XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
+ u8 * BufferPtr, u32 ByteCount)
+{
+ u32 FifoCount;
+ u32 WordCount;
+ u32 ExtraByteCount;
+ u32 *WordBuffer = (u32 *) BufferPtr;
+
+ /* assert to verify valid input arguments including 32 bit alignment of
+ * the buffer pointer
+ */
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(BufferPtr != NULL);
+ XASSERT_NONVOID(((u32) BufferPtr &
+ (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0);
+ XASSERT_NONVOID(ByteCount != 0);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /* get the count of how many words may be inserted into the FIFO */
+
+ FifoCount = XIo_In32(InstancePtr->RegBaseAddress +
+ XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
+
+ /* Calculate the number of 32 bit words required to insert the specified
+ * number of bytes in the FIFO and determine the number of extra bytes
+ * if the buffer length is not a multiple of 32 bit words
+ */
+
+ WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT;
+ ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT;
+
+ /* take into account the extra bytes in the total word count */
+
+ if (ExtraByteCount > 0) {
+ WordCount++;
+ }
+
+ /* if there's not enough room in the FIFO to hold the specified
+ * number of bytes, then indicate an error,
+ */
+ if (FifoCount < WordCount) {
+ return XST_PFIFO_NO_ROOM;
+ }
+
+ /* readjust the word count to not take into account the extra bytes */
+
+ if (ExtraByteCount > 0) {
+ WordCount--;
+ }
+
+ /* Write all the bytes of the buffer which can be written as 32 bit
+ * words into the FIFO, waiting to handle the extra bytes seperately
+ */
+ for (FifoCount = 0; FifoCount < WordCount; FifoCount++) {
+ XIo_Out32(InstancePtr->DataBaseAddress, WordBuffer[FifoCount]);
+ }
+
+ /* if there are extra bytes to handle, extract them from the buffer
+ * and create a 32 bit word and write it to the FIFO
+ */
+ if (ExtraByteCount > 0) {
+ u32 LastWord = 0;
+ u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount);
+
+ /* one extra byte in the buffer, put the byte into the last word
+ * to be inserted into the FIFO, perform this processing inline rather
+ * than in a loop to help performance
+ */
+ if (ExtraByteCount == 1) {
+ LastWord = ExtraBytesBuffer[0] << 24;
+ }
+
+ /* two extra bytes in the buffer, put each byte into the last word
+ * to be inserted into the FIFO
+ */
+ else if (ExtraByteCount == 2) {
+ LastWord = ExtraBytesBuffer[0] << 24 |
+ ExtraBytesBuffer[1] << 16;
+ }
+
+ /* three extra bytes in the buffer, put each byte into the last word
+ * to be inserted into the FIFO
+ */
+ else if (ExtraByteCount == 3) {
+ LastWord = ExtraBytesBuffer[0] << 24 |
+ ExtraBytesBuffer[1] << 16 |
+ ExtraBytesBuffer[2] << 8;
+ }
+
+ /* write the last 32 bit word to the FIFO and return with no errors */
+
+ XIo_Out32(InstancePtr->DataBaseAddress, LastWord);
+ }
+
+ return XST_SUCCESS;
+}
diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.h b/board/xilinx/common/xpacket_fifo_v1_00_b.h
new file mode 100644
index 0000000..1cda0e8
--- /dev/null
+++ b/board/xilinx/common/xpacket_fifo_v1_00_b.h
@@ -0,0 +1,306 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/*
+*
+* @file xpacket_fifo_v1_00_b.h
+*
+* This component is a common component because it's primary purpose is to
+* prevent code duplication in drivers. A driver which must handle a packet
+* FIFO uses this component rather than directly manipulating a packet FIFO.
+*
+* A FIFO is a device which has dual port memory such that one user may be
+* inserting data into the FIFO while another is consuming data from the FIFO.
+* A packet FIFO is designed for use with packet protocols such as Ethernet and
+* ATM. It is typically only used with devices when DMA and/or Scatter Gather
+* is used. It differs from a nonpacket FIFO in that it does not provide any
+* interrupts for thresholds of the FIFO such that it is less useful without
+* DMA.
+*
+* @note
+*
+* This component has the capability to generate an interrupt when an error
+* condition occurs. It is the user's responsibility to provide the interrupt
+* processing to handle the interrupt. This component provides the ability to
+* determine if that interrupt is active, a deadlock condition, and the ability
+* to reset the FIFO to clear the condition. In this condition, the device which
+* is using the FIFO should also be reset to prevent other problems. This error
+* condition could occur as a normal part of operation if the size of the FIFO
+* is not setup correctly. See the hardware IP specification for more details.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00b rpm 03/26/02 First release
+* </pre>
+*
+*****************************************************************************/
+#ifndef XPACKET_FIFO_H /* prevent circular inclusions */
+#define XPACKET_FIFO_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xstatus.h"
+
+/************************** Constant Definitions *****************************/
+
+/*
+ * These constants specify the FIFO type and are mutually exclusive
+ */
+#define XPF_READ_FIFO_TYPE 0 /* a read FIFO */
+#define XPF_WRITE_FIFO_TYPE 1 /* a write FIFO */
+
+/*
+ * These constants define the offsets to each of the registers from the
+ * register base address, each of the constants are a number of bytes
+ */
+#define XPF_RESET_REG_OFFSET 0UL
+#define XPF_MODULE_INFO_REG_OFFSET 0UL
+#define XPF_COUNT_STATUS_REG_OFFSET 4UL
+
+/*
+ * This constant is used with the Reset Register
+ */
+#define XPF_RESET_FIFO_MASK 0x0000000A
+
+/*
+ * These constants are used with the Occupancy/Vacancy Count Register. This
+ * register also contains FIFO status
+ */
+#define XPF_COUNT_MASK 0x0000FFFF
+#define XPF_DEADLOCK_MASK 0x20000000
+#define XPF_ALMOST_EMPTY_FULL_MASK 0x40000000
+#define XPF_EMPTY_FULL_MASK 0x80000000
+
+/**************************** Type Definitions *******************************/
+
+/*
+ * The XPacketFifo driver instance data. The driver is required to allocate a
+ * variable of this type for every packet FIFO in the device.
+ */
+typedef struct {
+ u32 RegBaseAddress; /* Base address of registers */
+ u32 IsReady; /* Device is initialized and ready */
+ u32 DataBaseAddress; /* Base address of data for FIFOs */
+} XPacketFifoV100b;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************/
+/*
+*
+* Reset the specified packet FIFO. Resetting a FIFO will cause any data
+* contained in the FIFO to be lost.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* Signature: void XPF_V100B_RESET(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_RESET(InstancePtr) \
+ XIo_Out32((InstancePtr)->RegBaseAddress + XPF_RESET_REG_OFFSET, XPF_RESET_FIFO_MASK);
+
+/*****************************************************************************/
+/*
+*
+* Get the occupancy count for a read packet FIFO and the vacancy count for a
+* write packet FIFO. These counts indicate the number of 32-bit words
+* contained (occupancy) in the FIFO or the number of 32-bit words available
+* to write (vacancy) in the FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* The occupancy or vacancy count for the specified packet FIFO.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_GET_COUNT(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_GET_COUNT(InstancePtr) \
+ (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+ XPF_COUNT_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is almost empty. Almost empty is
+* defined for a read FIFO when there is only one data word in the FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is almost empty, FALSE otherwise.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_IS_ALMOST_EMPTY(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_ALMOST_EMPTY(InstancePtr) \
+ (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+ XPF_ALMOST_EMPTY_FULL_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is almost full. Almost full is
+* defined for a write FIFO when there is only one available data word in the
+* FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is almost full, FALSE otherwise.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_IS_ALMOST_FULL(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_ALMOST_FULL(InstancePtr) \
+ (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+ XPF_ALMOST_EMPTY_FULL_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is empty. This applies only to a
+* read FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is empty, FALSE otherwise.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_IS_EMPTY(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_EMPTY(InstancePtr) \
+ (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+ XPF_EMPTY_FULL_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is full. This applies only to a
+* write FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is full, FALSE otherwise.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_IS_FULL(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_FULL(InstancePtr) \
+ (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+ XPF_EMPTY_FULL_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is deadlocked. This condition occurs
+* when the FIFO is full and empty at the same time and is caused by a packet
+* being written to the FIFO which exceeds the total data capacity of the FIFO.
+* It occurs because of the mark/restore features of the packet FIFO which allow
+* retransmission of a packet. The software should reset the FIFO and any devices
+* using the FIFO when this condition occurs.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is deadlocked, FALSE otherwise.
+*
+* @note
+*
+* This component has the capability to generate an interrupt when an error
+* condition occurs. It is the user's responsibility to provide the interrupt
+* processing to handle the interrupt. This function provides the ability to
+* determine if a deadlock condition, and the ability to reset the FIFO to
+* clear the condition.
+*
+* In this condition, the device which is using the FIFO should also be reset
+* to prevent other problems. This error condition could occur as a normal part
+* of operation if the size of the FIFO is not setup correctly.
+*
+* Signature: u32 XPF_V100B_IS_DEADLOCKED(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_DEADLOCKED(InstancePtr) \
+ (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+ XPF_DEADLOCK_MASK)
+
+/************************** Function Prototypes ******************************/
+
+/* Standard functions */
+
+XStatus XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
+ u32 RegBaseAddress, u32 DataBaseAddress);
+XStatus XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType);
+
+/* Data functions */
+
+XStatus XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
+ u8 * ReadBufferPtr, u32 ByteCount);
+XStatus XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
+ u8 * WriteBufferPtr, u32 ByteCount);
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/common/xstatus.h b/board/xilinx/common/xstatus.h
new file mode 100644
index 0000000..ffda4d7
--- /dev/null
+++ b/board/xilinx/common/xstatus.h
@@ -0,0 +1,347 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xstatus.h
+*
+* This file contains Xilinx software status codes. Status codes have their
+* own data type called XStatus. These codes are used throughout the Xilinx
+* device drivers.
+*
+******************************************************************************/
+
+#ifndef XSTATUS_H /* prevent circular inclusions */
+#define XSTATUS_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+
+/************************** Constant Definitions *****************************/
+
+/*********************** Common statuses 0 - 500 *****************************/
+
+#define XST_SUCCESS 0L
+#define XST_FAILURE 1L
+#define XST_DEVICE_NOT_FOUND 2L
+#define XST_DEVICE_BLOCK_NOT_FOUND 3L
+#define XST_INVALID_VERSION 4L
+#define XST_DEVICE_IS_STARTED 5L
+#define XST_DEVICE_IS_STOPPED 6L
+#define XST_FIFO_ERROR 7L /* an error occurred during an
+ operation with a FIFO such as
+ an underrun or overrun, this
+ error requires the device to
+ be reset */
+#define XST_RESET_ERROR 8L /* an error occurred which requires
+ the device to be reset */
+#define XST_DMA_ERROR 9L /* a DMA error occurred, this error
+ typically requires the device
+ using the DMA to be reset */
+#define XST_NOT_POLLED 10L /* the device is not configured for
+ polled mode operation */
+#define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to put
+ the specified data into */
+#define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large enough
+ to hold the expected data */
+#define XST_NO_DATA 13L /* there was no data available */
+#define XST_REGISTER_ERROR 14L /* a register did not contain the
+ expected value */
+#define XST_INVALID_PARAM 15L /* an invalid parameter was passed
+ into the function */
+#define XST_NOT_SGDMA 16L /* the device is not configured for
+ scatter-gather DMA operation */
+#define XST_LOOPBACK_ERROR 17L /* a loopback test failed */
+#define XST_NO_CALLBACK 18L /* a callback has not yet been
+ * registered */
+#define XST_NO_FEATURE 19L /* device is not configured with
+ * the requested feature */
+#define XST_NOT_INTERRUPT 20L /* device is not configured for
+ * interrupt mode operation */
+#define XST_DEVICE_BUSY 21L /* device is busy */
+#define XST_ERROR_COUNT_MAX 22L /* the error counters of a device
+ * have maxed out */
+#define XST_IS_STARTED 23L /* used when part of device is
+ * already started i.e.
+ * sub channel */
+#define XST_IS_STOPPED 24L /* used when part of device is
+ * already stopped i.e.
+ * sub channel */
+
+/***************** Utility Component statuses 401 - 500 *********************/
+
+#define XST_MEMTEST_FAILED 401L /* memory test failed */
+
+/***************** Common Components statuses 501 - 1000 *********************/
+
+/********************* Packet Fifo statuses 501 - 510 ************************/
+
+#define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */
+#define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */
+#define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value
+ was invalid after reset */
+
+/************************** DMA statuses 511 - 530 ***************************/
+
+#define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer
+ failed */
+#define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value
+ was invalid after reset */
+#define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains
+ no buffer descriptors ready
+ to be processed */
+#define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */
+#define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */
+#define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of
+ the scatter gather list are
+ being used */
+#define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer
+ descriptor which is to be
+ copied over in the scatter
+ list is locked */
+#define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have been
+ put into the scatter gather
+ list to be commited */
+#define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold
+ specified was larger than the
+ total # of buffer descriptors
+ in the scatter gather list */
+#define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has
+ already been created */
+#define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has
+ been created */
+#define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which was
+ being started was not committed
+ to the list */
+#define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to start
+ has already been used by the
+ hardware so it can't be reused
+ */
+
+/************************** IPIF statuses 531 - 550 ***************************/
+
+#define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width
+ was passed into the function */
+#define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at
+ reset was not valid */
+#define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device interrupt
+ status register did not read
+ back correctly */
+#define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status
+ register did not reset when
+ acked */
+#define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable
+ register was not updated when
+ other registers changed */
+#define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt
+ status register did not read
+ back correctly */
+#define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status register
+ did not reset when acked */
+#define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register was
+ not updated correctly when other
+ registers changed */
+#define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending
+ register did not indicate the
+ expected value */
+#define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID register
+ did not indicate the expected
+ value */
+
+/****************** Device specific statuses 1001 - 4095 *********************/
+
+/********************* Ethernet statuses 1001 - 1050 *************************/
+
+#define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big enough
+ * to hold the minimum number of
+ * buffers or descriptors */
+#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */
+#define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */
+#define XST_EMAC_MII_BUSY 1004L /* An MII operation is in progress */
+#define XST_EMAC_OUT_OF_BUFFERS 1005L /* Adapter is out of buffers */
+#define XST_EMAC_PARSE_ERROR 1006L /* Invalid adapter init string */
+#define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late
+ * collision on polled send */
+
+/*********************** UART statuses 1051 - 1075 ***************************/
+#define XST_UART
+
+#define XST_UART_INIT_ERROR 1051L
+#define XST_UART_START_ERROR 1052L
+#define XST_UART_CONFIG_ERROR 1053L
+#define XST_UART_TEST_FAIL 1054L
+#define XST_UART_BAUD_ERROR 1055L
+#define XST_UART_BAUD_RANGE 1056L
+
+/************************ IIC statuses 1076 - 1100 ***************************/
+
+#define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */
+#define XST_IIC_BUS_BUSY 1077 /* bus found busy */
+#define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with */
+ /* general call address */
+#define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg */
+ /* value after reset not valid */
+#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design */
+ /* value after reset not valid */
+#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design */
+ /* value after reset not valid */
+#define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design */
+ /* value after reset not valid */
+#define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register */
+ /* didn't return value written */
+#define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg */
+ /* didn't return value written */
+#define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg */
+ /* didn't return value written */
+#define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg */
+ /* didn't return value written */
+#define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg */
+ /* didn't return written value */
+#define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */
+
+/*********************** ATMC statuses 1101 - 1125 ***************************/
+
+#define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM
+ controller hit the max value
+ which requires the statistics
+ to be cleared */
+
+/*********************** Flash statuses 1126 - 1150 **************************/
+
+#define XST_FLASH_BUSY 1126L /* Flash is erasing or programming */
+#define XST_FLASH_READY 1127L /* Flash is ready for commands */
+#define XST_FLASH_ERROR 1128L /* Flash had detected an internal
+ error. Use XFlash_DeviceControl
+ to retrieve device specific codes */
+#define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase state */
+#define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write state */
+#define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by
+ driver */
+#define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */
+#define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */
+#define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase operation
+ aborted due to a timeout */
+#define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its
+ addressible range */
+#define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */
+#define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from
+ write/erase function with
+ XFL_NON_BLOCKING_WRITE/ERASE
+ option cleared */
+#define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */
+
+/*********************** SPI statuses 1151 - 1175 ****************************/
+
+#define XST_SPI_MODE_FAULT 1151 /* master was selected as slave */
+#define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */
+#define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit register */
+#define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive register */
+#define XST_SPI_NO_SLAVE 1155 /* no slave has been selected yet */
+#define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being
+ * selected */
+#define XST_SPI_NOT_MASTER 1157 /* operation is valid only as master */
+#define XST_SPI_SLAVE_ONLY 1158 /* device is configured as slave-only */
+#define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while disabled */
+
+/********************** OPB Arbiter statuses 1176 - 1200 *********************/
+
+#define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have either
+ * one master assigned to two or more
+ * priorities, or one master not
+ * assigned to any priority
+ */
+#define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify the
+ * priority levels without first
+ * suspending the use of priority
+ * levels
+ */
+#define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled but
+ * bus parking was not enabled
+ */
+#define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed
+ * priority mode to allow the
+ * priorities to be changed
+ */
+
+/************************ Intc statuses 1201 - 1225 **************************/
+
+#define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */
+#define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */
+
+/********************** TmrCtr statuses 1226 - 1250 **************************/
+
+#define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */
+
+/********************** WdtTb statuses 1251 - 1275 ***************************/
+
+#define XST_WDTTB_TIMER_FAILED 1251L
+
+/********************** PlbArb statuses 1276 - 1300 **************************/
+
+#define XST_PLBARB_FAIL_SELFTEST 1276L
+
+/********************** Plb2Opb statuses 1301 - 1325 *************************/
+
+#define XST_PLB2OPB_FAIL_SELFTEST 1301L
+
+/********************** Opb2Plb statuses 1326 - 1350 *************************/
+
+#define XST_OPB2PLB_FAIL_SELFTEST 1326L
+
+/********************** SysAce statuses 1351 - 1360 **************************/
+
+#define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted */
+
+/********************** PCI Bridge statuses 1361 - 1375 **********************/
+
+#define XST_PCI_INVALID_ADDRESS 1361L
+
+/**************************** Type Definitions *******************************/
+
+/**
+ * The status typedef.
+ */
+typedef u32 XStatus;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/common/xversion.c b/board/xilinx/common/xversion.c
new file mode 100644
index 0000000..c8a6915
--- /dev/null
+++ b/board/xilinx/common/xversion.c
@@ -0,0 +1,350 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************
+*
+* This file contains the implementation of the XVersion component. This
+* component represents a version ID. It is encapsulated within a component
+* so that it's type and implementation can change without affecting users of
+* it.
+*
+* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z
+* X is the major revision, YY is the minor revision, and Z is the
+* compatability revision.
+*
+* Packed versions are also utilized for the configuration ROM such that
+* memory is minimized. A packed version consumes only 16 bits and is
+* formatted as follows.
+*
+* <pre>
+* Revision Range Bit Positions
+*
+* Major Revision 0 - 9 Bits 15 - 12
+* Minor Revision 0 - 99 Bits 11 - 5
+* Compatability Revision a - z Bits 4 - 0
+</pre>
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xversion.h"
+
+/************************** Constant Definitions *****************************/
+
+/* the following constants define the masks and shift values to allow the
+ * revisions to be packed and unpacked, a packed version is packed into a 16
+ * bit value in the following format, XXXXYYYYYYYZZZZZ, where XXXX is the
+ * major revision, YYYYYYY is the minor revision, and ZZZZZ is the compatability
+ * revision
+ */
+#define XVE_MAJOR_SHIFT_VALUE 12
+#define XVE_MINOR_ONLY_MASK 0x0FE0
+#define XVE_MINOR_SHIFT_VALUE 5
+#define XVE_COMP_ONLY_MASK 0x001F
+
+/* the following constants define the specific characters of a version string
+ * for each character of the revision, a version string is in the following
+ * format, "X.YYZ" where X is the major revision (0 - 9), YY is the minor
+ * revision (00 - 99), and Z is the compatability revision (a - z)
+ */
+#define XVE_MAJOR_CHAR 0 /* major revision 0 - 9 */
+#define XVE_MINOR_TENS_CHAR 2 /* minor revision tens 0 - 9 */
+#define XVE_MINOR_ONES_CHAR 3 /* minor revision ones 0 - 9 */
+#define XVE_COMP_CHAR 4 /* compatability revision a - z */
+#define XVE_END_STRING_CHAR 5
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+static u32 IsVersionStringValid(s8 * StringPtr);
+
+/*****************************************************************************
+*
+* Unpacks a packed version into the specified version. Versions are packed
+* into the configuration ROM to reduce the amount storage. A packed version
+* is a binary format as oppossed to a non-packed version which is implemented
+* as a string.
+*
+* @param InstancePtr points to the version to unpack the packed version into.
+* @param PackedVersion contains the packed version to unpack.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+void
+XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion)
+{
+ /* not implemented yet since CROM related */
+}
+
+/*****************************************************************************
+*
+* Packs a version into the specified packed version. Versions are packed into
+* the configuration ROM to reduce the amount storage.
+*
+* @param InstancePtr points to the version to pack.
+* @param PackedVersionPtr points to the packed version which will receive
+* the new packed version.
+*
+* @return
+*
+* A status, XST_SUCCESS, indicating the packing was accomplished
+* successfully, or an error, XST_INVALID_VERSION, indicating the specified
+* input version was not valid such that the pack did not occur
+* <br><br>
+* The packed version pointed to by PackedVersionPtr is modified with the new
+* packed version if the status indicates success.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersionPtr)
+{
+ /* not implemented yet since CROM related */
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************
+*
+* Determines if two versions are equal.
+*
+* @param InstancePtr points to the first version to be compared.
+* @param VersionPtr points to a second version to be compared.
+*
+* @return
+*
+* TRUE if the versions are equal, FALSE otherwise.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+u32
+XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr)
+{
+ u8 *Version1 = (u8 *) InstancePtr;
+ u8 *Version2 = (u8 *) VersionPtr;
+ int Index;
+
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(VersionPtr != NULL);
+
+ /* check each byte of the versions to see if they are the same,
+ * return at any point a byte differs between them
+ */
+ for (Index = 0; Index < sizeof (XVersion); Index++) {
+ if (Version1[Index] != Version2[Index]) {
+ return FALSE;
+ }
+ }
+
+ /* No byte was found to be different between the versions, so indicate
+ * the versions are equal
+ */
+ return TRUE;
+}
+
+/*****************************************************************************
+*
+* Converts a version to a null terminated string.
+*
+* @param InstancePtr points to the version to convert.
+* @param StringPtr points to the string which will be the result of the
+* conversion. This does not need to point to a null terminated
+* string as an input, but must point to storage which is an adequate
+* amount to hold the result string.
+*
+* @return
+*
+* The null terminated string is inserted at the location pointed to by
+* StringPtr if the status indicates success.
+*
+* @note
+*
+* It is necessary for the caller to have already allocated the storage to
+* contain the string. The amount of memory necessary for the string is
+* specified in the version header file.
+*
+******************************************************************************/
+void
+XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(StringPtr != NULL);
+
+ /* since version is implemented as a string, just copy the specified
+ * input into the specified output
+ */
+ XVersion_Copy(InstancePtr, (XVersion *) StringPtr);
+}
+
+/*****************************************************************************
+*
+* Initializes a version from a null terminated string. Since the string may not
+* be a format which is compatible with the version, an error could occur.
+*
+* @param InstancePtr points to the version which is to be initialized.
+* @param StringPtr points to a null terminated string which will be
+* converted to a version. The format of the string must match the
+* version string format which is X.YYX where X = 0 - 9, YY = 00 - 99,
+* Z = a - z.
+*
+* @return
+*
+* A status, XST_SUCCESS, indicating the conversion was accomplished
+* successfully, or XST_INVALID_VERSION indicating the version string format
+* was not valid.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr)
+{
+ /* assert to verify input arguments */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(StringPtr != NULL);
+
+ /* if the version string specified is not valid, return an error */
+
+ if (!IsVersionStringValid(StringPtr)) {
+ return XST_INVALID_VERSION;
+ }
+
+ /* copy the specified string into the specified version and indicate the
+ * conversion was successful
+ */
+ XVersion_Copy((XVersion *) StringPtr, InstancePtr);
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************
+*
+* Copies the contents of a version to another version.
+*
+* @param InstancePtr points to the version which is the source of data for
+* the copy operation.
+* @param VersionPtr points to another version which is the destination of
+* the copy operation.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+void
+XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr)
+{
+ u8 *Source = (u8 *) InstancePtr;
+ u8 *Destination = (u8 *) VersionPtr;
+ int Index;
+
+ /* assert to verify input arguments */
+
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(VersionPtr != NULL);
+
+ /* copy each byte of the source version to the destination version */
+
+ for (Index = 0; Index < sizeof (XVersion); Index++) {
+ Destination[Index] = Source[Index];
+ }
+}
+
+/*****************************************************************************
+*
+* Determines if the specified version is valid.
+*
+* @param StringPtr points to the string to be validated.
+*
+* @return
+*
+* TRUE if the version string is a valid format, FALSE otherwise.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+static u32
+IsVersionStringValid(s8 * StringPtr)
+{
+ /* if the input string is not a valid format, "X.YYZ" where X = 0 - 9,
+ * YY = 00 - 99, and Z = a - z, then indicate it's not valid
+ */
+ if ((StringPtr[XVE_MAJOR_CHAR] < '0') ||
+ (StringPtr[XVE_MAJOR_CHAR] > '9') ||
+ (StringPtr[XVE_MINOR_TENS_CHAR] < '0') ||
+ (StringPtr[XVE_MINOR_TENS_CHAR] > '9') ||
+ (StringPtr[XVE_MINOR_ONES_CHAR] < '0') ||
+ (StringPtr[XVE_MINOR_ONES_CHAR] > '9') ||
+ (StringPtr[XVE_COMP_CHAR] < 'a') ||
+ (StringPtr[XVE_COMP_CHAR] > 'z')) {
+ return FALSE;
+ }
+
+ return TRUE;
+}
diff --git a/board/xilinx/common/xversion.h b/board/xilinx/common/xversion.h
new file mode 100644
index 0000000..17f9da7
--- /dev/null
+++ b/board/xilinx/common/xversion.h
@@ -0,0 +1,97 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************
+*
+* This file contains the interface for the XVersion component. This
+* component represents a version ID. It is encapsulated within a component
+* so that it's type and implementation can change without affecting users of
+* it.
+*
+* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z
+* X is the major revision, YY is the minor revision, and Z is the
+* compatability revision.
+*
+* Packed versions are also utilized for the configuration ROM such that
+* memory is minimized. A packed version consumes only 16 bits and is
+* formatted as follows.
+*
+* <pre>
+* Revision Range Bit Positions
+*
+* Major Revision 0 - 9 Bits 15 - 12
+* Minor Revision 0 - 99 Bits 11 - 5
+* Compatability Revision a - z Bits 4 - 0
+* </pre>
+*
+******************************************************************************/
+
+#ifndef XVERSION_H /* prevent circular inclusions */
+#define XVERSION_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xstatus.h"
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/* the following data type is used to hold a null terminated version string
+ * consisting of the following format, "X.YYX"
+ */
+typedef s8 XVersion[6];
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+void XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion);
+
+XStatus XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersion);
+
+u32 XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr);
+
+void XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr);
+
+XStatus XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr);
+
+void XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr);
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile
new file mode 100644
index 0000000..d9007c0
--- /dev/null
+++ b/board/xilinx/ml300/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+CFLAGS += -I../ml300 -I../common -I../xilinx_enet
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o serial.o \
+ ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
+ ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
+ ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
+ ../xilinx_enet/xemac_intr_dma.o \
+ ../common/xbasic_types.o ../common/xdma_channel.o \
+ ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
+ ../common/xversion.o
+
+SOBJS = init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/xilinx/ml300/config.mk b/board/xilinx/ml300/config.mk
new file mode 100644
index 0000000..57ddb2f
--- /dev/null
+++ b/board/xilinx/ml300/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ADCIOP boards
+#
+
+#TEXT_BASE = 0xFFFE0000
+TEXT_BASE = 0x04000000
diff --git a/board/xilinx/ml300/init.S b/board/xilinx/ml300/init.S
new file mode 100644
index 0000000..f753df8
--- /dev/null
+++ b/board/xilinx/ml300/init.S
@@ -0,0 +1,48 @@
+/*
+ * init.S: Stubs for U-Boot initialization
+ *
+ * Author: Xilinx, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+ * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+ * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+ * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+ * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+ * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+ * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+ * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+ * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+ * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ *
+ * Xilinx hardware products are not intended for use in life support
+ * appliances, devices, or systems. Use in such applications is
+ * expressly prohibited.
+ *
+ *
+ * (c) Copyright 2002-2004 Xilinx Inc.
+ * All rights reserved.
+ *
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ */
+
+ .globl ext_bus_cntlr_init
+ext_bus_cntlr_init:
+ blr
+
+ .globl sdram_init
+sdram_init:
+ blr
diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c
new file mode 100644
index 0000000..dbe8a8a
--- /dev/null
+++ b/board/xilinx/ml300/ml300.c
@@ -0,0 +1,109 @@
+/*
+ * ml300.c: U-Boot platform support for Xilinx ML300 board
+ *
+ * Author: Xilinx, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+ * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+ * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+ * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+ * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+ * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+ * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+ * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+ * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+ * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ *
+ * Xilinx hardware products are not intended for use in life support
+ * appliances, devices, or systems. Use in such applications is
+ * expressly prohibited.
+ *
+ *
+ * (c) Copyright 2002-2004 Xilinx Inc.
+ * All rights reserved.
+ *
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include "xparameters.h"
+
+int
+board_pre_init(void)
+{
+ return 0;
+}
+
+int
+checkboard(void)
+{
+ unsigned char *s = getenv("serial#");
+ unsigned char *e;
+
+ if (!s || strncmp(s, "ML300", 9)) {
+ printf("### No HW ID - assuming ML300");
+ } else {
+ for (e = s; *e; ++e) {
+ if (*e == ' ')
+ break;
+ }
+
+ for (; s < e; ++s) {
+ putc(*s);
+ }
+ }
+
+ putc('\n');
+
+ return (0);
+}
+
+long int
+initdram(int board_type)
+{
+ return 128 * 1024 * 1024;
+}
+
+int
+testdram(void)
+{
+ printf("test: xxx MB - ok\n");
+
+ return (0);
+}
+
+/* implement functions originally in cpu/ppc4xx/speed.c */
+void
+get_sys_info(sys_info_t * sysInfo)
+{
+ sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+
+ /* only correct if the PLB and OPB run at the same frequency */
+ sysInfo->freqPLB = XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
+ sysInfo->freqPCI = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 3;
+}
+
+ulong
+get_PCI_freq(void)
+{
+ ulong val;
+ PPC405_SYS_INFO sys_info;
+
+ get_sys_info(&sys_info);
+ val = sys_info.freqPCI;
+ return val;
+}
diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c
new file mode 100644
index 0000000..19bcc6f
--- /dev/null
+++ b/board/xilinx/ml300/serial.c
@@ -0,0 +1,155 @@
+/*
+ * Author: Xilinx, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+ * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+ * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+ * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+ * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+ * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+ * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+ * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+ * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+ * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ *
+ * Xilinx hardware products are not intended for use in life support
+ * appliances, devices, or systems. Use in such applications is
+ * expressly prohibited.
+ *
+ *
+ * (c) Copyright 2002-2004 Xilinx Inc.
+ * All rights reserved.
+ *
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <asm/u-boot.h>
+#include <asm/processor.h>
+#include <common.h>
+#include <command.h>
+#include <configs/ml300.h>
+#include "xparameters.h"
+
+#define USE_CHAN1 \
+ ((defined XPAR_UARTNS550_0_BASEADDR) && (defined CFG_INIT_CHAN1))
+#define USE_CHAN2 \
+ ((defined XPAR_UARTNS550_1_BASEADDR) && (defined CFG_INIT_CHAN2))
+
+#if USE_CHAN1
+#include <ns16550.h>
+#endif
+
+#if USE_CHAN1
+const NS16550_t COM_PORTS[] = { (NS16550_t) (XPAR_UARTNS550_0_BASEADDR + 3)
+#if USE_CHAN2
+ , (NS16550_t) (XPAR_UARTNS550_1_BASEADDR + 3)
+#endif
+};
+#endif
+
+int
+serial_init(void)
+{
+#if USE_CHAN1
+ DECLARE_GLOBAL_DATA_PTR;
+ int clock_divisor;
+
+ clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
+ (void) NS16550_init(COM_PORTS[0], clock_divisor);
+#if USE_CHAN2
+ clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
+ (void) NS16550_init(COM_PORTS[1], clock_divisor);
+#endif
+#endif
+ return 0;
+
+}
+
+void
+serial_putc(const char c)
+{
+ if (c == '\n')
+ NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r');
+
+ NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c);
+}
+
+int
+serial_getc(void)
+{
+ return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]);
+}
+
+int
+serial_tstc(void)
+{
+ return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]);
+}
+
+void
+serial_setbrg(void)
+{
+#if USE_CHAN1
+ DECLARE_GLOBAL_DATA_PTR;
+ int clock_divisor;
+
+ clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
+ NS16550_reinit(COM_PORTS[0], clock_divisor);
+#if USE_CHAN2
+ clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
+ NS16550_reinit(COM_PORTS[1], clock_divisor);
+#endif
+#endif
+}
+
+void
+serial_puts(const char *s)
+{
+ while (*s) {
+ serial_putc(*s++);
+ }
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+void
+kgdb_serial_init(void)
+{
+}
+
+void
+putDebugChar(int c)
+{
+ serial_putc(c);
+}
+
+void
+putDebugStr(const char *str)
+{
+ serial_puts(str);
+}
+
+int
+getDebugChar(void)
+{
+ return serial_getc();
+}
+
+void
+kgdb_interruptible(int yes)
+{
+ return;
+}
+#endif /* CFG_CMD_KGDB */
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
new file mode 100644
index 0000000..319b925
--- /dev/null
+++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
@@ -0,0 +1,41 @@
+#!/bin/bash
+
+if[$
+# -ne 1 ]
+ then echo "usage: Ltypes filename" > &2 exit 2 fi FILE = "$1"
+#TMPFILE='mktemp "${FILE}.XXXXXX"' || exit 1
+ TMPFILE = $ {
+ FILE}
+
+ . ` date "+%s" ` touch $TMPFILE || exit 1
+# Change all the Xilinx types to Linux types and put the result into a temp file
+ sed
+ - e 's/\bXTRUE\b/TRUE/g'
+ - e 's/\bXFALSE\b/FALSE/g'
+ - e 's/\bXNULL\b/NULL/g'
+ - e 's/<asm/delay.h>/<asm\/delay.h>/g'
+ - e 's/\bXENV_USLEEP\b/udelay/g'
+ - e 's/\bXuint8\b/u8/g'
+ - e 's/\bXuint16\b/u16/g'
+ - e 's/\bXuint32\b/u32/g'
+ - e 's/\bXint8\b/s8/g'
+ - e 's/\bXint16\b/s16/g'
+ - e 's/\bXint32\b/s32/g' - e 's/\bXboolean\b/u32/g' "${FILE}" > "${TMPFILE}"
+# Overlay the original file with the temp file
+ mv "${TMPFILE}" "${FILE}"
+# Are we doing xbasic_types.h?
+ if["${FILE##*/}" = xbasic_types.h]
+ then
+# Remember as you're reading this that we've already gone through the prior
+# sed script. We need to do some other things to xbasic_types.h:
+# 1) Add ifndefs around TRUE and FALSE defines
+# 2) Remove definition of NULL as NULL
+# 3) Replace most of the primitive types section with a #include
+ sed - e '/u32 true/,/#define false/Ic\
+#ifndef TRUE\
+#define TRUE 1\
+#endif\
+#ifndef FALSE\
+#define FALSE 0\
+#endif' - e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' - e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\
+#include <linux/types.h>' "${FILE}" > "${TMPFILE}" mv "${TMPFILE}" "${FILE}" fi
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
new file mode 100644
index 0000000..e1aa7fd
--- /dev/null
+++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
@@ -0,0 +1,48 @@
+# (c) Copyright 2004 Xilinx Inc.
+# Author: Xilinx, Inc.
+#
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+#
+# XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+# COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+# ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+# XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+# FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+# ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+# XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+# THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+# WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+# CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE.
+#
+#
+# Xilinx hardware products are not intended for use in life support
+# appliances, devices, or systems. Use in such applications is
+# expressly prohibited.
+#
+#
+# (c) Copyright 2002-2004 Xilinx Inc.
+# All rights reserved.
+#
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 675 Mass Ave, Cambridge, MA 02139, USA.
+
+OPTION psf_version = 2.1;
+
+BEGIN LIBRARY uboot OPTION DRC = uboot_drc;
+
+BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot";
+PROPERTY size = 0;
+PARAM name = periph_name, desc = "Name of Peripheral connected", type = string;
+END ARRAY
+ PARAMETER name = TARGET_DIR, desc =
+ "Target Directory for U-Boot BSP", type = string;
+
+END LIBRARY
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
new file mode 100644
index 0000000..8d939b4
--- /dev/null
+++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
@@ -0,0 +1,298 @@
+#
+# Author: Xilinx, Inc.
+#
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+#
+# XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+# COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+# ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+# XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+# FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+# ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+# XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+# THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+# WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+# CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE.
+#
+#
+# Xilinx hardware products are not intended for use in life support
+# appliances, devices, or systems. Use in such applications is
+# expressly prohibited.
+#
+#
+# (c) Copyright 2002-2004 Xilinx Inc.
+# All rights reserved.
+#
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+# Globals
+lappend drvlist
+set ltypes "../../../sw_services/uboot_v1_00_a/data/Ltypes"
+
+proc uboot_drc {lib_handle} {
+ puts "U-Boot DRC..."
+}
+
+proc generate {libname} {
+
+ global drvlist
+
+ # Get list of peripherals connected to uboot
+ set conn_periphs [xget_handle $libname "ARRAY" "connected_periphs"]
+ #lappend drvlist
+ if {[string compare -nocase $conn_periphs ""] != 0} {
+ set conn_periphs_elems [xget_handle $conn_periphs "ELEMENTS" "*"]
+ # For each periph
+ foreach periph_elem $conn_periphs_elems {
+ set periph [xget_value $periph_elem "PARAMETER" "periph_name"]
+ # 1. Get driver
+ set drv [xget_swhandle $periph]
+ set posn [lsearch -exact $drvlist $drv]
+ if {$posn == -1} {
+ lappend drvlist $drv
+ }
+ }
+
+ set file_handle [xopen_include_file "xparameters.h"]
+ puts $file_handle "\n/******************************************************************/\n"
+ puts $file_handle "/* U-Boot Redefines */"
+ puts $file_handle "\n/******************************************************************/\n"
+ close $file_handle
+
+ foreach drv $drvlist {
+ set drvname [xget_value $drv "NAME"]
+
+ #Redefines xparameters.h
+ if {[string compare -nocase $drvname "uartns550"] == 0} {
+ xredefine_uartns550 $drv "xparameters.h"
+ } elseif {[string compare -nocase $drvname "emac"] == 0} {
+ xredefine_emac $drv "xparameters.h"
+ }
+ }
+ }
+
+ # define core_clock
+ xredefine_params $libname "xparameters.h" "CORE_CLOCK_FREQ_HZ"
+}
+
+proc xget_corefreq {} {
+ set processor [xget_processor]
+ set name [xget_value $processor "NAME"]
+ puts "procname : $name"
+ set processor_driver [xget_swhandle [xget_value $processor "NAME"]]
+ puts "procdrv : $processor_driver"
+ if {[string compare -nocase $processor_driver ""] != 0} {
+ set arg "CORE_CLOCK_FREQ_HZ"
+ #set retval [xget_value $processor_driver "PARAMETER" $arg]
+ set retval [xget_dname [xget_value $processor_driver "NAME"] $arg]
+ return $retval
+ }
+}
+
+# procedure that adds # defines to xparameters.h as XPAR_argument
+proc xredefine_params {handle file_name args} {
+
+ puts "xredfine ..."
+ # Open include file
+ set file_handle [xopen_include_file $file_name]
+ puts "args : $args"
+
+ foreach arg $args {
+ if {[string compare -nocase $arg "CORE_CLOCK_FREQ_HZ"] == 0} {
+ set value [xget_corefreq]
+ puts "corefreq : $value"
+ } else {
+ set value [xget_value $handle "PARAMETER" $arg]
+ puts "value : $value"
+ }
+
+ if {$value != ""} {
+ set value [xformat_addr_string $value $arg]
+ set name [string toupper $arg]
+ set name [format "XPAR_%s" $name]
+ puts $file_handle "#define $name $value"
+ }
+ }
+
+ puts $file_handle "\n/******************************************************************/\n"
+ close $file_handle
+}
+
+# uart redefines...
+proc xredefine_uartns550 {drvhandle file_name} {
+
+ xredefine_include_file $drvhandle $file_name "uartns550" "C_BASEADDR" "C_HIGHADDR" "CLOCK_HZ" "DEVICE_ID"
+
+}
+
+proc xredefine_emac {drvhandle file_name} {
+
+ xredefine_include_file $drvhandle $file_name "emac" "C_BASEADDR" "C_HIGHADDR" "C_DMA_PRESENT" "C_MII_EXIST" "C_ERR_COUNT_EXIST" "DEVICE_ID"
+
+}
+
+#######################
+
+proc xredefine_include_file {drv_handle file_name drv_string args} {
+
+ # Open include file
+ set file_handle [xopen_include_file $file_name]
+
+ # Get all peripherals connected to this driver
+ set periphs [xget_periphs $drv_handle]
+
+ set pname [format "XPAR_%s_" [string toupper $drv_string]]
+
+ # Print all parameters for all peripherals
+ set device_id 0
+ set sub_periphs 1
+ foreach periph $periphs {
+ puts "$periph : $drv_string : $sub_periphs"
+
+ for {set i 0} {$i < $sub_periphs} {incr i} {
+ foreach arg $args {
+ set name "${pname}${device_id}_"
+
+ if {[string compare -nocase "CLOCK_HZ" $arg] == 0} {
+ set xdrv_string [format "%s%s" "X" $drv_string]
+ set value [xget_dname $xdrv_string $arg]
+ set name "${name}CLOCK_FREQ_HZ"
+ } else {
+ if {[string match C_* $arg]} {
+ set name [format "%s%s" $name [string range $arg 2 end]]
+ } else {
+ set name "${name}${arg}"
+ }
+ set value [xget_name $periph $arg]
+ }
+
+ if {[string compare -nocase "uartns550" $drv_string] == 0} {
+ if {[string compare -nocase "C_BASEADDR" $arg] == 0} {
+ set value [format "(%s%s%s)" $value "+" "0x1000"]
+ }
+ }
+
+ puts $file_handle "#define $name $value"
+ if {[string compare -nocase "DEVICE_ID" $arg] == 0} {
+ incr device_id
+ }
+ }
+ }
+ }
+ puts $file_handle "\n/******************************************************************/\n"
+ close $file_handle
+}
+
+##################################################
+# procedure post_generate
+# This generates the drivers directory for uboot
+# and runs the ltypes script
+##################################################
+
+proc post_generate {lib_handle} {
+
+ global drvlist
+
+ # Create U-Boot tree structure
+ set pwd [pwd]
+ set common_dir "uboot/board/xilinx/common"
+ set xilinx_enet_dir "uboot/board/xilinx/xilinx_enet"
+ set ml300_dir "uboot/board/xilinx/ml300"
+
+ exec bash -c "mkdir -p $common_dir $xilinx_enet_dir $ml300_dir"
+
+ # Copy files for xilinx_ocp
+ xcopy_commonfiles
+
+ foreach drv $drvlist {
+ set drvname [xget_value $drv "NAME"]
+ set ver [xget_value $drv "PARAMETER" "DRIVER_VER"]
+ set ver [string map {. _} $ver]
+ set dirname [format "%s_v%s" $drvname $ver]
+
+ if {[string compare -nocase $drvname "emac"] == 0} {
+ xcopy_emac $drv $dirname
+ }
+ }
+
+ # Call Ltypes Script here
+ set uboot "uboot"
+ xltype_file $uboot
+
+ # Move xparameters.h around
+ exec bash -c "cp ../../include/xparameters.h $ml300_dir"
+
+ # copy the whole U-Boot BSP to its final destination
+ set value [xget_value $lib_handle "PARAMETER" TARGET_DIR]
+ puts "TARGET_DIR : $value"
+
+ if {$value != ""} {
+ if {[file isdirectory $value] == 0} {
+ exec bash -c "mkdir -p $value"
+ }
+ exec bash -c "cp -Rp uboot/* $value"
+ }
+}
+
+proc xcopy_commonfiles {} {
+
+ global drvlist
+
+ set common_dir "uboot/board/xilinx/common"
+
+ foreach drv $drvlist {
+ set depends [xget_value $drv "OPTION" "DEPENDS"]
+ foreach dep $depends {
+ puts "dep : $dep"
+ if {[file isdirectory "../$dep"] == 1} {
+ exec bash -c "cp -f ../$dep/src/*.c $common_dir"
+ exec bash -c "cp -f ../$dep/src/*.h $common_dir"
+ }
+ }
+ }
+
+}
+
+proc xcopy_emac {drv_handle dirname} {
+ set emac "board/xilinx/xilinx_enet"
+ xcopy_dir $dirname $emac
+}
+
+proc xcopy_dir {srcdir dstdir} {
+
+ set dstdirname [format "%s%s" "uboot/" $dstdir]
+ if {[file isdirectory "../$srcdir"] == 1} {
+ # Copy files from src to dst
+ exec bash -c "mkdir -p $dstdirname"
+ exec bash -c "cp -f ../$srcdir/src/*.c $dstdirname"
+ exec bash -c "cp -f ../$srcdir/src/*.h $dstdirname"
+ } else {
+ puts "$srcdir does not exist ..."
+ }
+}
+
+
+proc xltype_file {filename} {
+
+ global ltypes
+
+ puts $filename
+
+ if {[file isdirectory $filename]} {
+ foreach entry [glob -nocomplain [file join $filename *]] {
+ xltype_file $entry
+ }
+ } else {
+ exec bash -c "$ltypes $filename"
+ }
+
+}
diff --git a/board/xilinx/ml300/u-boot.lds b/board/xilinx/ml300/u-boot.lds
new file mode 100644
index 0000000..e7b7e10
--- /dev/null
+++ b/board/xilinx/ml300/u-boot.lds
@@ -0,0 +1,146 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+ENTRY(_start)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+/*
+ cpu/ppc4xx/start.o (.text)
+ board/xilinx/ml300/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ cpu/ppc4xx/405gp_enet.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+*/
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/xilinx/ml300/u-boot.lds.debug b/board/xilinx/ml300/u-boot.lds.debug
new file mode 100644
index 0000000..d483424
--- /dev/null
+++ b/board/xilinx/ml300/u-boot.lds.debug
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+
+ common/environment.o(.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/xilinx/ml300/xparameters.h b/board/xilinx/ml300/xparameters.h
new file mode 100644
index 0000000..c636256
--- /dev/null
+++ b/board/xilinx/ml300/xparameters.h
@@ -0,0 +1,216 @@
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by libgen.
+* Version: Xilinx EDK 6.1.2 EDK_G.14
+* DO NOT EDIT.
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+* Description: Driver parameters
+*
+*******************************************************************/
+
+#define XPAR_XPCI_NUM_INSTANCES 1
+#define XPAR_XPCI_CLOCK_HZ 33333333
+#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
+#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000
+#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF
+#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000
+#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004
+#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000
+#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000
+#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF
+#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000
+#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF
+
+/******************************************************************/
+
+#define XPAR_XEMAC_NUM_INSTANCES 1
+#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
+
+/******************************************************************/
+
+#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0
+#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000
+#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7)
+#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1
+#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8)
+#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F)
+#define XPAR_XGPIO_NUM_INSTANCES 2
+
+/******************************************************************/
+
+#define XPAR_XIIC_NUM_INSTANCES 1
+#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
+#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
+#define XPAR_OPB_IIC_0_DEVICE_ID 0
+#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
+
+/******************************************************************/
+
+#define XPAR_XUARTNS550_NUM_INSTANCES 2
+#define XPAR_XUARTNS550_CLOCK_HZ 100000000
+#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
+#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
+#define XPAR_OPB_UART16550_0_DEVICE_ID 0
+#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000
+#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF
+#define XPAR_OPB_UART16550_1_DEVICE_ID 1
+
+/******************************************************************/
+
+#define XPAR_XSPI_NUM_INSTANCES 1
+#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
+#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
+#define XPAR_OPB_SPI_0_DEVICE_ID 0
+#define XPAR_OPB_SPI_0_FIFO_EXIST 1
+#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
+#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
+
+/******************************************************************/
+
+#define XPAR_XPS2_NUM_INSTANCES 2
+#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
+#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
+#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
+#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
+#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
+#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
+
+/******************************************************************/
+
+#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1
+#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000
+#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007
+#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0
+
+/******************************************************************/
+
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
+#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000
+#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF
+#define XPAR_PLB_DDR_0_BASEADDR 0x00000000
+#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF
+
+/******************************************************************/
+
+#define XPAR_XINTC_HAS_IPR 1
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18
+#define XPAR_XINTC_USE_DCR 0
+#define XPAR_XINTC_NUM_INSTANCES 1
+#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0
+#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF
+#define XPAR_DCR_INTC_0_DEVICE_ID 0
+#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000
+
+/******************************************************************/
+
+#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0
+#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1
+#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2
+#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3
+#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4
+#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5
+#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6
+#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7
+#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
+#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9
+#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10
+#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11
+#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12
+#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13
+#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14
+#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15
+#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16
+#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17
+
+/******************************************************************/
+
+#define XPAR_XTFT_NUM_INSTANCES 1
+#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
+#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
+#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
+
+/******************************************************************/
+
+#define XPAR_XSYSACE_MEM_WIDTH 8
+#define XPAR_XSYSACE_NUM_INSTANCES 1
+#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
+#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
+#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
+#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
+
+/******************************************************************/
+
+#define STDIN_BASEADDRESS 0xA0000000
+#define STDOUT_BASEADDRESS 0xA0000000
+#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
+
+/******************************************************************/
+
+/* U-Boot Redefines */
+
+/******************************************************************/
+
+#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
+#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
+#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
+#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
+#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
+#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
+#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
+#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
+#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
+#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
+#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
+#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
+#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
+
+/******************************************************************/
diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c
new file mode 100644
index 0000000..a3c37ba
--- /dev/null
+++ b/board/xilinx/xilinx_enet/emac_adapter.c
@@ -0,0 +1,153 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+
+#include <common.h>
+#include <net.h>
+#include <configs/ml300.h>
+#include "xparameters.h"
+#include "xemac.h"
+
+#if defined(XPAR_EMAC_0_DEVICE_ID)
+/*
+ * ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from
+ * PKTSIZE and PKTSIZE_ALIGN (include/net.h)
+ */
+
+#define ENET_MAX_MTU PKTSIZE
+#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
+#define ENET_ADDR_LENGTH 6
+
+static XEmac Emac;
+static char etherrxbuff[PKTSIZE_ALIGN]; /* Receive buffer */
+
+/* hardcoded MAC address for the Xilinx EMAC Core */
+static u8 EMACAddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
+
+static int initialized = 0;
+
+void
+eth_halt(void)
+{
+ if (initialized)
+ (void) XEmac_Stop(&Emac);
+}
+
+int
+eth_init(bd_t * bis)
+{
+ u32 Options;
+ XStatus Result;
+
+#ifdef DEBUG
+ printf("EMAC Initialization Started\n\r");
+#endif
+
+ Result = XEmac_Initialize(&Emac, XPAR_EMAC_0_DEVICE_ID);
+ if (Result != XST_SUCCESS) {
+ return 0;
+ }
+
+ /* make sure the Emac is stopped before it is started */
+ (void) XEmac_Stop(&Emac);
+
+ memcpy(bis->bi_enetaddr, EMACAddr, 6);
+ Result = XEmac_SetMacAddress(&Emac, EMACAddr);
+ if (Result != XST_SUCCESS) {
+ return 0;
+ }
+
+ Options =
+ (XEM_POLLED_OPTION | XEM_UNICAST_OPTION | XEM_BROADCAST_OPTION |
+ XEM_FDUPLEX_OPTION | XEM_INSERT_FCS_OPTION |
+ XEM_INSERT_PAD_OPTION);
+ Result = XEmac_SetOptions(&Emac, Options);
+ if (Result != XST_SUCCESS) {
+ return 0;
+ }
+
+ Result = XEmac_Start(&Emac);
+ if (Result != XST_SUCCESS) {
+ return 0;
+ }
+#ifdef DEBUG
+ printf("EMAC Initialization complete\n\r");
+#endif
+
+ initialized = 1;
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------------+
++-----------------------------------------------------------------------------*/
+int
+eth_send(volatile void *ptr, int len)
+{
+ XStatus Result;
+
+ if (len > ENET_MAX_MTU)
+ len = ENET_MAX_MTU;
+
+ Result = XEmac_PollSend(&Emac, (u8 *) ptr, len);
+ if (Result == XST_SUCCESS) {
+ return (1);
+ } else {
+ printf("Error while sending frame\n\r");
+ return (0);
+ }
+
+}
+
+int
+eth_rx(void)
+{
+ u32 RecvFrameLength;
+ XStatus Result;
+
+ RecvFrameLength = PKTSIZE;
+ Result = XEmac_PollRecv(&Emac, (u8 *) etherrxbuff, &RecvFrameLength);
+ if (Result == XST_SUCCESS) {
+ NetReceive(etherrxbuff, RecvFrameLength);
+ return (1);
+ } else {
+ return (0);
+ }
+}
+
+#endif
diff --git a/board/xilinx/xilinx_enet/xemac.c b/board/xilinx/xilinx_enet/xemac.c
new file mode 100644
index 0000000..48b4ede
--- /dev/null
+++ b/board/xilinx/xilinx_enet/xemac.c
@@ -0,0 +1,844 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemac.c
+*
+* The XEmac driver. Functions in this file are the minimum required functions
+* for this driver. See xemac.h for a detailed description of the driver.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a rpm 07/31/01 First release
+* 1.00b rpm 02/20/02 Repartitioned files and functions
+* 1.00b rpm 07/23/02 Removed the PHY reset from Initialize()
+* 1.00b rmm 09/23/02 Removed commented code in Initialize(). Recycled as
+* XEmac_mPhyReset macro in xemac_l.h.
+* 1.00c rpm 12/05/02 New version includes support for simple DMA
+* 1.00c rpm 12/12/02 Changed location of IsStarted assignment in XEmac_Start
+* to be sure the flag is set before the device and
+* interrupts are enabled.
+* 1.00c rpm 02/03/03 SelfTest was not clearing polled mode. Take driver out
+* of polled mode in XEmac_Reset() to fix this problem.
+* 1.00c rmm 05/13/03 Fixed diab compiler warnings relating to asserts.
+* </pre>
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xemac_i.h"
+#include "xio.h"
+#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+static XStatus ConfigureDma(XEmac * InstancePtr);
+static XStatus ConfigureFifo(XEmac * InstancePtr);
+static void StubFifoHandler(void *CallBackRef);
+static void StubErrorHandler(void *CallBackRef, XStatus ErrorCode);
+static void StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr,
+ u32 NumBds);
+
+/************************** Variable Definitions *****************************/
+
+/*****************************************************************************/
+/**
+*
+* Initialize a specific XEmac instance/driver. The initialization entails:
+* - Initialize fields of the XEmac structure
+* - Clear the Ethernet statistics for this device
+* - Initialize the IPIF component with its register base address
+* - Configure the FIFO components with their register base addresses.
+* - If the device is configured with DMA, configure the DMA channel components
+* with their register base addresses. At some later time, memory pools for
+* the scatter-gather descriptor lists may be passed to the driver.
+* - Reset the Ethernet MAC
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param DeviceId is the unique id of the device controlled by this XEmac
+* instance. Passing in a device id associates the generic XEmac
+* instance to a specific device, as chosen by the caller or application
+* developer.
+*
+* @return
+*
+* - XST_SUCCESS if initialization was successful
+* - XST_DEVICE_IS_STARTED if the device has already been started
+* - XST_DEVICE_NOT_FOUND if device configuration information was not found for
+* a device with the supplied device ID.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XEmac_Initialize(XEmac * InstancePtr, u16 DeviceId)
+{
+ XStatus Result;
+ XEmac_Config *ConfigPtr; /* configuration information */
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+
+ /*
+ * If the device is started, disallow the initialize and return a status
+ * indicating it is started. This allows the user to stop the device
+ * and reinitialize, but prevents a user from inadvertently initializing
+ */
+ if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STARTED;
+ }
+
+ /*
+ * Lookup the device configuration in the temporary CROM table. Use this
+ * configuration info down below when initializing this component.
+ */
+ ConfigPtr = XEmac_LookupConfig(DeviceId);
+ if (ConfigPtr == NULL) {
+ return XST_DEVICE_NOT_FOUND;
+ }
+
+ /*
+ * Set some default values
+ */
+ InstancePtr->IsReady = 0;
+ InstancePtr->IsStarted = 0;
+ InstancePtr->IpIfDmaConfig = ConfigPtr->IpIfDmaConfig;
+ InstancePtr->HasMii = ConfigPtr->HasMii;
+ InstancePtr->HasMulticastHash = FALSE;
+
+ /* Always default polled to false, let user configure this mode */
+ InstancePtr->IsPolled = FALSE;
+ InstancePtr->FifoRecvHandler = StubFifoHandler;
+ InstancePtr->FifoSendHandler = StubFifoHandler;
+ InstancePtr->ErrorHandler = StubErrorHandler;
+ InstancePtr->SgRecvHandler = StubSgHandler;
+ InstancePtr->SgSendHandler = StubSgHandler;
+
+ /*
+ * Clear the statistics for this driver
+ */
+ XEmac_mClearStruct((u8 *) & InstancePtr->Stats, sizeof (XEmac_Stats));
+
+ /*
+ * Initialize the device register base addresses
+ */
+ InstancePtr->BaseAddress = ConfigPtr->BaseAddress;
+
+ /*
+ * Configure the send and receive FIFOs in the MAC
+ */
+ Result = ConfigureFifo(InstancePtr);
+ if (Result != XST_SUCCESS) {
+ return Result;
+ }
+
+ /*
+ * If the device is configured for DMA, configure the send and receive DMA
+ * channels in the MAC.
+ */
+ if (XEmac_mIsDma(InstancePtr)) {
+ Result = ConfigureDma(InstancePtr);
+ if (Result != XST_SUCCESS) {
+ return Result;
+ }
+ }
+
+ /*
+ * Indicate the component is now ready to use. Note that this is done before
+ * we reset the device and the PHY below, which may seem a bit odd. The
+ * choice was made to move it here rather than remove the asserts in various
+ * functions (e.g., Reset() and all functions that it calls). Applications
+ * that use multiple threads, one to initialize the XEmac driver and one
+ * waiting on the IsReady condition could have a problem with this sequence.
+ */
+ InstancePtr->IsReady = XCOMPONENT_IS_READY;
+
+ /*
+ * Reset the MAC to get it into its initial state. It is expected that
+ * device configuration by the user will take place after this
+ * initialization is done, but before the device is started.
+ */
+ XEmac_Reset(InstancePtr);
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Start the Ethernet controller as follows:
+* - If not in polled mode
+* - Set the internal interrupt enable registers appropriately
+* - Enable interrupts within the device itself. Note that connection of
+* the driver's interrupt handler to the interrupt source (typically
+* done using the interrupt controller component) is done by the higher
+* layer software.
+* - If the device is configured with scatter-gather DMA, start the DMA
+* channels if the descriptor lists are not empty
+* - Enable the transmitter
+* - Enable the receiver
+*
+* The PHY is enabled after driver initialization. We assume the upper layer
+* software has configured it and the EMAC appropriately before this function
+* is called.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* - XST_SUCCESS if the device was started successfully
+* - XST_NO_CALLBACK if a callback function has not yet been registered using
+* the SetxxxHandler function. This is required if in interrupt mode.
+* - XST_DEVICE_IS_STARTED if the device is already started
+* - XST_DMA_SG_NO_LIST if configured for scatter-gather DMA and a descriptor
+* list has not yet been created for the send or receive channel.
+*
+* @note
+*
+* The driver tries to match the hardware configuration. So if the hardware
+* is configured with scatter-gather DMA, the driver expects to start the
+* scatter-gather channels and expects that the user has set up the buffer
+* descriptor lists already. If the user expects to use the driver in a mode
+* different than how the hardware is configured, the user should modify the
+* configuration table to reflect the mode to be used. Modifying the config
+* table is a workaround for now until we get some experience with how users
+* are intending to use the hardware in its different configurations. For
+* example, if the hardware is built with scatter-gather DMA but the user is
+* intending to use only simple DMA, the user either needs to modify the config
+* table as a workaround or rebuild the hardware with only simple DMA.
+*
+* This function makes use of internal resources that are shared between the
+* Start, Stop, and SetOptions functions. So if one task might be setting device
+* options while another is trying to start the device, the user is required to
+* provide protection of this shared data (typically using a semaphore).
+*
+******************************************************************************/
+XStatus
+XEmac_Start(XEmac * InstancePtr)
+{
+ u32 ControlReg;
+ XStatus Result;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * If it is already started, return a status indicating so
+ */
+ if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STARTED;
+ }
+
+ /*
+ * If not polled, enable interrupts
+ */
+ if (!InstancePtr->IsPolled) {
+ /*
+ * Verify that the callbacks have been registered, then enable
+ * interrupts
+ */
+ if (XEmac_mIsSgDma(InstancePtr)) {
+ if ((InstancePtr->SgRecvHandler == StubSgHandler) ||
+ (InstancePtr->SgSendHandler == StubSgHandler)) {
+ return XST_NO_CALLBACK;
+ }
+
+ /* Enable IPIF interrupts */
+ XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
+ XEM_IPIF_DMA_DFT_MASK |
+ XIIF_V123B_ERROR_MASK);
+ XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress,
+ XEM_EIR_DFT_SG_MASK);
+
+ /* Enable scatter-gather DMA interrupts */
+ XDmaChannel_SetIntrEnable(&InstancePtr->RecvChannel,
+ XEM_DMA_SG_INTR_MASK);
+ XDmaChannel_SetIntrEnable(&InstancePtr->SendChannel,
+ XEM_DMA_SG_INTR_MASK);
+ } else {
+ if ((InstancePtr->FifoRecvHandler == StubFifoHandler) ||
+ (InstancePtr->FifoSendHandler == StubFifoHandler)) {
+ return XST_NO_CALLBACK;
+ }
+
+ /* Enable IPIF interrupts (used by simple DMA also) */
+ XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
+ XEM_IPIF_FIFO_DFT_MASK |
+ XIIF_V123B_ERROR_MASK);
+ XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress,
+ XEM_EIR_DFT_FIFO_MASK);
+ }
+
+ /* Enable the global IPIF interrupt output */
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+ }
+
+ /*
+ * Indicate that the device is started before we enable the transmitter
+ * or receiver. This needs to be done before because as soon as the
+ * receiver is enabled we may get an interrupt, and there are functions
+ * in the interrupt handling path that rely on the IsStarted flag.
+ */
+ InstancePtr->IsStarted = XCOMPONENT_IS_STARTED;
+
+ /*
+ * Enable the transmitter, and receiver (do a read/modify/write to preserve
+ * current settings). There is no critical section here since this register
+ * is not modified during interrupt context.
+ */
+ ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
+ ControlReg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK);
+ ControlReg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
+
+ XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
+
+ /*
+ * If configured with scatter-gather DMA and not polled, restart the
+ * DMA channels in case there are buffers ready to be sent or received into.
+ * The DMA SgStart function uses data that can be modified during interrupt
+ * context, so a critical section is required here.
+ */
+ if ((XEmac_mIsSgDma(InstancePtr)) && (!InstancePtr->IsPolled)) {
+ XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
+
+ /*
+ * The only error we care about is if the list has not yet been
+ * created, or on receive, if no buffer descriptors have been
+ * added yet (the list is empty). Other errors are benign at this point.
+ */
+ Result = XDmaChannel_SgStart(&InstancePtr->RecvChannel);
+ if ((Result == XST_DMA_SG_NO_LIST)
+ || (Result == XST_DMA_SG_LIST_EMPTY)) {
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+ return Result;
+ }
+
+ Result = XDmaChannel_SgStart(&InstancePtr->SendChannel);
+ if (Result == XST_DMA_SG_NO_LIST) {
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+ return Result;
+ }
+
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+ }
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Stop the Ethernet MAC as follows:
+* - If the device is configured with scatter-gather DMA, stop the DMA
+* channels (wait for acknowledgment of stop)
+* - Disable the transmitter and receiver
+* - Disable interrupts if not in polled mode (the higher layer software is
+* responsible for disabling interrupts at the interrupt controller)
+*
+* The PHY is left enabled after a Stop is called.
+*
+* If the device is configured for scatter-gather DMA, the DMA engine stops at
+* the next buffer descriptor in its list. The remaining descriptors in the list
+* are not removed, so anything in the list will be transmitted or received when
+* the device is restarted. The side effect of doing this is that the last
+* buffer descriptor processed by the DMA engine before stopping may not be the
+* last descriptor in the Ethernet frame. So when the device is restarted, a
+* partial frame (i.e., a bad frame) may be transmitted/received. This is only a
+* concern if a frame can span multiple buffer descriptors, which is dependent
+* on the size of the network buffers.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* - XST_SUCCESS if the device was stopped successfully
+* - XST_DEVICE_IS_STOPPED if the device is already stopped
+*
+* @note
+*
+* This function makes use of internal resources that are shared between the
+* Start, Stop, and SetOptions functions. So if one task might be setting device
+* options while another is trying to start the device, the user is required to
+* provide protection of this shared data (typically using a semaphore).
+*
+******************************************************************************/
+XStatus
+XEmac_Stop(XEmac * InstancePtr)
+{
+ u32 ControlReg;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * If the device is already stopped, do nothing but return a status
+ * indicating so
+ */
+ if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STOPPED;
+ }
+
+ /*
+ * If configured for scatter-gather DMA, stop the DMA channels. Ignore
+ * the XST_DMA_SG_IS_STOPPED return code. There is a critical section
+ * here between SgStart and SgStop, and SgStart can be called in interrupt
+ * context, so disable interrupts while calling SgStop.
+ */
+ if (XEmac_mIsSgDma(InstancePtr)) {
+ XBufDescriptor *BdTemp; /* temporary descriptor pointer */
+
+ XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
+
+ (void) XDmaChannel_SgStop(&InstancePtr->SendChannel, &BdTemp);
+ (void) XDmaChannel_SgStop(&InstancePtr->RecvChannel, &BdTemp);
+
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+ }
+
+ /*
+ * Disable the transmitter and receiver. There is no critical section
+ * here since this register is not modified during interrupt context.
+ */
+ ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
+ ControlReg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
+ XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
+
+ /*
+ * If not in polled mode, disable interrupts for IPIF (includes MAC and
+ * DMAs)
+ */
+ if (!InstancePtr->IsPolled) {
+ XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
+ }
+
+ InstancePtr->IsStarted = 0;
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Reset the Ethernet MAC. This is a graceful reset in that the device is stopped
+* first. Resets the DMA channels, the FIFOs, the transmitter, and the receiver.
+* The PHY is not reset. Any frames in the scatter-gather descriptor lists will
+* remain in the lists. The side effect of doing this is that after a reset and
+* following a restart of the device, frames that were in the list before the
+* reset may be transmitted or received. Reset must only be called after the
+* driver has been initialized.
+*
+* The driver is also taken out of polled mode if polled mode was set. The user
+* is responsbile for re-configuring the driver into polled mode after the
+* reset if desired.
+*
+* The configuration after this reset is as follows:
+* - Half duplex
+* - Disabled transmitter and receiver
+* - Enabled PHY (the PHY is not reset)
+* - MAC transmitter does pad insertion, FCS insertion, and source address
+* overwrite.
+* - MAC receiver does not strip padding or FCS
+* - Interframe Gap as recommended by IEEE Std. 802.3 (96 bit times)
+* - Unicast addressing enabled
+* - Broadcast addressing enabled
+* - Multicast addressing disabled (addresses are preserved)
+* - Promiscuous addressing disabled
+* - Default packet threshold and packet wait bound register values for
+* scatter-gather DMA operation
+* - MAC address of all zeros
+* - Non-polled mode
+*
+* The upper layer software is responsible for re-configuring (if necessary)
+* and restarting the MAC after the reset. Note that the PHY is not reset. PHY
+* control is left to the upper layer software. Note also that driver statistics
+* are not cleared on reset. It is up to the upper layer software to clear the
+* statistics if needed.
+*
+* When a reset is required due to an internal error, the driver notifies the
+* upper layer software of this need through the ErrorHandler callback and
+* specific status codes. The upper layer software is responsible for calling
+* this Reset function and then re-configuring the device.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+* @internal
+*
+* The reset is accomplished by setting the IPIF reset register. This takes
+* care of resetting all hardware blocks, including the MAC.
+*
+******************************************************************************/
+void
+XEmac_Reset(XEmac * InstancePtr)
+{
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * Stop the device first
+ */
+ (void) XEmac_Stop(InstancePtr);
+
+ /*
+ * Take the driver out of polled mode
+ */
+ InstancePtr->IsPolled = FALSE;
+
+ /*
+ * Reset the entire IPIF at once. If we choose someday to reset each
+ * hardware block separately, the reset should occur in the direction of
+ * data flow. For example, for the send direction the reset order is DMA
+ * first, then FIFO, then the MAC transmitter.
+ */
+ XIIF_V123B_RESET(InstancePtr->BaseAddress);
+
+ if (XEmac_mIsSgDma(InstancePtr)) {
+ /*
+ * After reset, configure the scatter-gather DMA packet threshold and
+ * packet wait bound registers to default values. Ignore the return
+ * values of these functions since they only return error if the device
+ * is not stopped.
+ */
+ (void) XEmac_SetPktThreshold(InstancePtr, XEM_SEND,
+ XEM_SGDMA_DFT_THRESHOLD);
+ (void) XEmac_SetPktThreshold(InstancePtr, XEM_RECV,
+ XEM_SGDMA_DFT_THRESHOLD);
+ (void) XEmac_SetPktWaitBound(InstancePtr, XEM_SEND,
+ XEM_SGDMA_DFT_WAITBOUND);
+ (void) XEmac_SetPktWaitBound(InstancePtr, XEM_RECV,
+ XEM_SGDMA_DFT_WAITBOUND);
+ }
+}
+
+/*****************************************************************************/
+/**
+*
+* Set the MAC address for this driver/device. The address is a 48-bit value.
+* The device must be stopped before calling this function.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param AddressPtr is a pointer to a 6-byte MAC address.
+*
+* @return
+*
+* - XST_SUCCESS if the MAC address was set successfully
+* - XST_DEVICE_IS_STARTED if the device has not yet been stopped
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XEmac_SetMacAddress(XEmac * InstancePtr, u8 * AddressPtr)
+{
+ u32 MacAddr = 0;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(AddressPtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * The device must be stopped before setting the MAC address
+ */
+ if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STARTED;
+ }
+
+ /*
+ * Set the device station address high and low registers
+ */
+ MacAddr = (AddressPtr[0] << 8) | AddressPtr[1];
+ XIo_Out32(InstancePtr->BaseAddress + XEM_SAH_OFFSET, MacAddr);
+
+ MacAddr = (AddressPtr[2] << 24) | (AddressPtr[3] << 16) |
+ (AddressPtr[4] << 8) | AddressPtr[5];
+
+ XIo_Out32(InstancePtr->BaseAddress + XEM_SAL_OFFSET, MacAddr);
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Get the MAC address for this driver/device.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param BufferPtr is an output parameter, and is a pointer to a buffer into
+* which the current MAC address will be copied. The buffer must be at
+* least 6 bytes.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+void
+XEmac_GetMacAddress(XEmac * InstancePtr, u8 * BufferPtr)
+{
+ u32 MacAddrHi;
+ u32 MacAddrLo;
+
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(BufferPtr != NULL);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ MacAddrHi = XIo_In32(InstancePtr->BaseAddress + XEM_SAH_OFFSET);
+ MacAddrLo = XIo_In32(InstancePtr->BaseAddress + XEM_SAL_OFFSET);
+
+ BufferPtr[0] = (u8) (MacAddrHi >> 8);
+ BufferPtr[1] = (u8) MacAddrHi;
+ BufferPtr[2] = (u8) (MacAddrLo >> 24);
+ BufferPtr[3] = (u8) (MacAddrLo >> 16);
+ BufferPtr[4] = (u8) (MacAddrLo >> 8);
+ BufferPtr[5] = (u8) MacAddrLo;
+}
+
+/******************************************************************************/
+/**
+*
+* Configure DMA capabilities.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* - XST_SUCCESS if successful initialization of DMA
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+static XStatus
+ConfigureDma(XEmac * InstancePtr)
+{
+ XStatus Result;
+
+ /*
+ * Initialize the DMA channels with their base addresses. We assume
+ * scatter-gather DMA is the only possible configuration. Descriptor space
+ * will need to be set later by the upper layer.
+ */
+ Result = XDmaChannel_Initialize(&InstancePtr->RecvChannel,
+ InstancePtr->BaseAddress +
+ XEM_DMA_RECV_OFFSET);
+ if (Result != XST_SUCCESS) {
+ return Result;
+ }
+
+ Result = XDmaChannel_Initialize(&InstancePtr->SendChannel,
+ InstancePtr->BaseAddress +
+ XEM_DMA_SEND_OFFSET);
+
+ return Result;
+}
+
+/******************************************************************************/
+/**
+*
+* Configure the send and receive FIFO components with their base addresses
+* and interrupt masks. Currently the base addresses are defined constants.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* XST_SUCCESS if successful initialization of the packet FIFOs
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+static XStatus
+ConfigureFifo(XEmac * InstancePtr)
+{
+ XStatus Result;
+
+ /*
+ * Return status from the packet FIFOs initialization is ignored since
+ * they always return success.
+ */
+ Result = XPacketFifoV100b_Initialize(&InstancePtr->RecvFifo,
+ InstancePtr->BaseAddress +
+ XEM_PFIFO_RXREG_OFFSET,
+ InstancePtr->BaseAddress +
+ XEM_PFIFO_RXDATA_OFFSET);
+ if (Result != XST_SUCCESS) {
+ return Result;
+ }
+
+ Result = XPacketFifoV100b_Initialize(&InstancePtr->SendFifo,
+ InstancePtr->BaseAddress +
+ XEM_PFIFO_TXREG_OFFSET,
+ InstancePtr->BaseAddress +
+ XEM_PFIFO_TXDATA_OFFSET);
+ return Result;
+}
+
+/******************************************************************************/
+/**
+*
+* This is a stub for the scatter-gather send and recv callbacks. The stub
+* is here in case the upper layers forget to set the handlers.
+*
+* @param CallBackRef is a pointer to the upper layer callback reference
+* @param BdPtr is a pointer to the first buffer descriptor in a list
+* @param NumBds is the number of descriptors in the list.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+static void
+StubSgHandler(void *CallBackRef, XBufDescriptor * BdPtr, u32 NumBds)
+{
+ XASSERT_VOID_ALWAYS();
+}
+
+/******************************************************************************/
+/**
+*
+* This is a stub for the non-DMA send and recv callbacks. The stub is here in
+* case the upper layers forget to set the handlers.
+*
+* @param CallBackRef is a pointer to the upper layer callback reference
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+static void
+StubFifoHandler(void *CallBackRef)
+{
+ XASSERT_VOID_ALWAYS();
+}
+
+/******************************************************************************/
+/**
+*
+* This is a stub for the asynchronous error callback. The stub is here in
+* case the upper layers forget to set the handler.
+*
+* @param CallBackRef is a pointer to the upper layer callback reference
+* @param ErrorCode is the Xilinx error code, indicating the cause of the error
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+static void
+StubErrorHandler(void *CallBackRef, XStatus ErrorCode)
+{
+ XASSERT_VOID_ALWAYS();
+}
+
+/*****************************************************************************/
+/**
+*
+* Lookup the device configuration based on the unique device ID. The table
+* EmacConfigTable contains the configuration info for each device in the system.
+*
+* @param DeviceId is the unique device ID of the device being looked up.
+*
+* @return
+*
+* A pointer to the configuration table entry corresponding to the given
+* device ID, or NULL if no match is found.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XEmac_Config *
+XEmac_LookupConfig(u16 DeviceId)
+{
+ XEmac_Config *CfgPtr = NULL;
+ int i;
+
+ for (i = 0; i < XPAR_XEMAC_NUM_INSTANCES; i++) {
+ if (XEmac_ConfigTable[i].DeviceId == DeviceId) {
+ CfgPtr = &XEmac_ConfigTable[i];
+ break;
+ }
+ }
+
+ return CfgPtr;
+}
diff --git a/board/xilinx/xilinx_enet/xemac.h b/board/xilinx/xilinx_enet/xemac.h
new file mode 100644
index 0000000..ed704bf
--- /dev/null
+++ b/board/xilinx/xilinx_enet/xemac.h
@@ -0,0 +1,673 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemac.h
+*
+* The Xilinx Ethernet driver component. This component supports the Xilinx
+* Ethernet 10/100 MAC (EMAC).
+*
+* The Xilinx Ethernet 10/100 MAC supports the following features:
+* - Simple and scatter-gather DMA operations, as well as simple memory
+* mapped direct I/O interface (FIFOs).
+* - Media Independent Interface (MII) for connection to external
+* 10/100 Mbps PHY transceivers.
+* - MII management control reads and writes with MII PHYs
+* - Independent internal transmit and receive FIFOs
+* - CSMA/CD compliant operations for half-duplex modes
+* - Programmable PHY reset signal
+* - Unicast, broadcast, and promiscuous address filtering (no multicast yet)
+* - Internal loopback
+* - Automatic source address insertion or overwrite (programmable)
+* - Automatic FCS insertion and stripping (programmable)
+* - Automatic pad insertion and stripping (programmable)
+* - Pause frame (flow control) detection in full-duplex mode
+* - Programmable interframe gap
+* - VLAN frame support.
+* - Pause frame support
+*
+* The device driver supports all the features listed above.
+*
+* <b>Driver Description</b>
+*
+* The device driver enables higher layer software (e.g., an application) to
+* communicate to the EMAC. The driver handles transmission and reception of
+* Ethernet frames, as well as configuration of the controller. It does not
+* handle protocol stack functionality such as Link Layer Control (LLC) or the
+* Address Resolution Protocol (ARP). The protocol stack that makes use of the
+* driver handles this functionality. This implies that the driver is simply a
+* pass-through mechanism between a protocol stack and the EMAC. A single device
+* driver can support multiple EMACs.
+*
+* The driver is designed for a zero-copy buffer scheme. That is, the driver will
+* not copy buffers. This avoids potential throughput bottlenecks within the
+* driver.
+*
+* Since the driver is a simple pass-through mechanism between a protocol stack
+* and the EMAC, no assembly or disassembly of Ethernet frames is done at the
+* driver-level. This assumes that the protocol stack passes a correctly
+* formatted Ethernet frame to the driver for transmission, and that the driver
+* does not validate the contents of an incoming frame
+*
+* <b>PHY Communication</b>
+*
+* The driver provides rudimentary read and write functions to allow the higher
+* layer software to access the PHY. The EMAC provides MII registers for the
+* driver to access. This management interface can be parameterized away in the
+* FPGA implementation process. If this is the case, the PHY read and write
+* functions of the driver return XST_NO_FEATURE.
+*
+* External loopback is usually supported at the PHY. It is up to the user to
+* turn external loopback on or off at the PHY. The driver simply provides pass-
+* through functions for configuring the PHY. The driver does not read, write,
+* or reset the PHY on its own. All control of the PHY must be done by the user.
+*
+* <b>Asynchronous Callbacks</b>
+*
+* The driver services interrupts and passes Ethernet frames to the higher layer
+* software through asynchronous callback functions. When using the driver
+* directly (i.e., not with the RTOS protocol stack), the higher layer
+* software must register its callback functions during initialization. The
+* driver requires callback functions for received frames, for confirmation of
+* transmitted frames, and for asynchronous errors.
+*
+* <b>Interrupts</b>
+*
+* The driver has no dependencies on the interrupt controller. The driver
+* provides two interrupt handlers. XEmac_IntrHandlerDma() handles interrupts
+* when the EMAC is configured with scatter-gather DMA. XEmac_IntrHandlerFifo()
+* handles interrupts when the EMAC is configured for direct FIFO I/O or simple
+* DMA. Either of these routines can be connected to the system interrupt
+* controller by the user.
+*
+* <b>Interrupt Frequency</b>
+*
+* When the EMAC is configured with scatter-gather DMA, the frequency of
+* interrupts can be controlled with the interrupt coalescing features of the
+* scatter-gather DMA engine. The frequency of interrupts can be adjusted using
+* the driver API functions for setting the packet count threshold and the packet
+* wait bound values.
+*
+* The scatter-gather DMA engine only interrupts when the packet count threshold
+* is reached, instead of interrupting for each packet. A packet is a generic
+* term used by the scatter-gather DMA engine, and is equivalent to an Ethernet
+* frame in our case.
+*
+* The packet wait bound is a timer value used during interrupt coalescing to
+* trigger an interrupt when not enough packets have been received to reach the
+* packet count threshold.
+*
+* These values can be tuned by the user to meet their needs. If there appear to
+* be interrupt latency problems or delays in packet arrival that are longer than
+* might be expected, the user should verify that the packet count threshold is
+* set low enough to receive interrupts before the wait bound timer goes off.
+*
+* <b>Device Reset</b>
+*
+* Some errors that can occur in the device require a device reset. These errors
+* are listed in the XEmac_SetErrorHandler() function header. The user's error
+* handler is responsible for resetting the device and re-configuring it based on
+* its needs (the driver does not save the current configuration). When
+* integrating into an RTOS, these reset and re-configure obligations are
+* taken care of by the Xilinx adapter software if it exists for that RTOS.
+*
+* <b>Device Configuration</b>
+*
+* The device can be configured in various ways during the FPGA implementation
+* process. Configuration parameters are stored in the xemac_g.c files.
+* A table is defined where each entry contains configuration information
+* for an EMAC device. This information includes such things as the base address
+* of the memory-mapped device, the base addresses of IPIF, DMA, and FIFO modules
+* within the device, and whether the device has DMA, counter registers,
+* multicast support, MII support, and flow control.
+*
+* The driver tries to use the features built into the device. So if, for
+* example, the hardware is configured with scatter-gather DMA, the driver
+* expects to start the scatter-gather channels and expects that the user has set
+* up the buffer descriptor lists already. If the user expects to use the driver
+* in a mode different than how the hardware is configured, the user should
+* modify the configuration table to reflect the mode to be used. Modifying the
+* configuration table is a workaround for now until we get some experience with
+* how users are intending to use the hardware in its different configurations.
+* For example, if the hardware is built with scatter-gather DMA but the user is
+* intending to use only simple DMA, the user either needs to modify the config
+* table as a workaround or rebuild the hardware with only simple DMA. The
+* recommendation at this point is to build the hardware with the features you
+* intend to use. If you're inclined to modify the table, do so before the call
+* to XEmac_Initialize(). Here is a snippet of code that changes a device to
+* simple DMA (the hardware needs to have DMA for this to work of course):
+* <pre>
+* XEmac_Config *ConfigPtr;
+*
+* ConfigPtr = XEmac_LookupConfig(DeviceId);
+* ConfigPtr->IpIfDmaConfig = XEM_CFG_SIMPLE_DMA;
+* </pre>
+*
+* <b>Simple DMA</b>
+*
+* Simple DMA is supported through the FIFO functions, FifoSend and FifoRecv, of
+* the driver (i.e., there is no separate interface for it). The driver makes use
+* of the DMA engine for a simple DMA transfer if the device is configured with
+* DMA, otherwise it uses the FIFOs directly. While the simple DMA interface is
+* therefore transparent to the user, the caching of network buffers is not.
+* If the device is configured with DMA and the FIFO interface is used, the user
+* must ensure that the network buffers are not cached or are cache coherent,
+* since DMA will be used to transfer to and from the Emac device. If the device
+* is configured with DMA and the user really wants to use the FIFOs directly,
+* the user should rebuild the hardware without DMA. If unable to do this, there
+* is a workaround (described above in Device Configuration) to modify the
+* configuration table of the driver to fake the driver into thinking the device
+* has no DMA. A code snippet follows:
+* <pre>
+* XEmac_Config *ConfigPtr;
+*
+* ConfigPtr = XEmac_LookupConfig(DeviceId);
+* ConfigPtr->IpIfDmaConfig = XEM_CFG_NO_DMA;
+* </pre>
+*
+* <b>Asserts</b>
+*
+* Asserts are used within all Xilinx drivers to enforce constraints on argument
+* values. Asserts can be turned off on a system-wide basis by defining, at
+* compile time, the NDEBUG identifier. By default, asserts are turned on and it
+* is recommended that users leave asserts on during development.
+*
+* <b>Building the driver</b>
+*
+* The XEmac driver is composed of several source files. Why so many? This
+* allows the user to build and link only those parts of the driver that are
+* necessary. Since the EMAC hardware can be configured in various ways (e.g.,
+* with or without DMA), the driver too can be built with varying features.
+* For the most part, this means that besides always linking in xemac.c, you
+* link in only the driver functionality you want. Some of the choices you have
+* are polled vs. interrupt, interrupt with FIFOs only vs. interrupt with DMA,
+* self-test diagnostics, and driver statistics. Note that currently the DMA code
+* must be linked in, even if you don't have DMA in the device.
+*
+* @note
+*
+* Xilinx drivers are typically composed of two components, one is the driver
+* and the other is the adapter. The driver is independent of OS and processor
+* and is intended to be highly portable. The adapter is OS-specific and
+* facilitates communication between the driver and an OS.
+* <br><br>
+* This driver is intended to be RTOS and processor independent. It works
+* with physical addresses only. Any needs for dynamic memory management,
+* threads or thread mutual exclusion, virtual memory, or cache control must
+* be satisfied by the layer above this driver.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -------------------------------------------------------
+* 1.00a rpm 07/31/01 First release
+* 1.00b rpm 02/20/02 Repartitioned files and functions
+* 1.00b rpm 10/08/02 Replaced HasSgDma boolean with IpifDmaConfig enumerated
+* configuration parameter
+* 1.00c rpm 12/05/02 New version includes support for simple DMA and the delay
+* argument to SgSend
+* 1.00c rpm 02/03/03 The XST_DMA_SG_COUNT_EXCEEDED return code was removed
+* from SetPktThreshold in the internal DMA driver. Also
+* avoided compiler warnings by initializing Result in the
+* DMA interrupt service routines.
+* </pre>
+*
+******************************************************************************/
+
+#ifndef XEMAC_H /* prevent circular inclusions */
+#define XEMAC_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xstatus.h"
+#include "xparameters.h"
+#include "xpacket_fifo_v1_00_b.h" /* Uses v1.00b of Packet Fifo */
+#include "xdma_channel.h"
+
+/************************** Constant Definitions *****************************/
+
+/*
+ * Device information
+ */
+#define XEM_DEVICE_NAME "xemac"
+#define XEM_DEVICE_DESC "Xilinx Ethernet 10/100 MAC"
+
+/** @name Configuration options
+ *
+ * Device configuration options (see the XEmac_SetOptions() and
+ * XEmac_GetOptions() for information on how to use these options)
+ * @{
+ */
+/**
+ * <pre>
+ * XEM_BROADCAST_OPTION Broadcast addressing on or off (default is on)
+ * XEM_UNICAST_OPTION Unicast addressing on or off (default is on)
+ * XEM_PROMISC_OPTION Promiscuous addressing on or off (default is off)
+ * XEM_FDUPLEX_OPTION Full duplex on or off (default is off)
+ * XEM_POLLED_OPTION Polled mode on or off (default is off)
+ * XEM_LOOPBACK_OPTION Internal loopback on or off (default is off)
+ * XEM_FLOW_CONTROL_OPTION Interpret pause frames in full duplex mode
+ * (default is off)
+ * XEM_INSERT_PAD_OPTION Pad short frames on transmit (default is on)
+ * XEM_INSERT_FCS_OPTION Insert FCS (CRC) on transmit (default is on)
+ * XEM_INSERT_ADDR_OPTION Insert source address on transmit (default is on)
+ * XEM_OVWRT_ADDR_OPTION Overwrite source address on transmit. This is
+ * only used if source address insertion is on.
+ * (default is on)
+ * XEM_STRIP_PAD_FCS_OPTION Strip FCS and padding from received frames
+ * (default is off)
+ * </pre>
+ */
+#define XEM_UNICAST_OPTION 0x00000001UL
+#define XEM_BROADCAST_OPTION 0x00000002UL
+#define XEM_PROMISC_OPTION 0x00000004UL
+#define XEM_FDUPLEX_OPTION 0x00000008UL
+#define XEM_POLLED_OPTION 0x00000010UL
+#define XEM_LOOPBACK_OPTION 0x00000020UL
+#define XEM_FLOW_CONTROL_OPTION 0x00000080UL
+#define XEM_INSERT_PAD_OPTION 0x00000100UL
+#define XEM_INSERT_FCS_OPTION 0x00000200UL
+#define XEM_INSERT_ADDR_OPTION 0x00000400UL
+#define XEM_OVWRT_ADDR_OPTION 0x00000800UL
+#define XEM_STRIP_PAD_FCS_OPTION 0x00002000UL
+/*@}*/
+/*
+ * Not supported yet:
+ * XEM_MULTICAST_OPTION Multicast addressing on or off (default is off)
+ */
+/* NOT SUPPORTED YET... */
+#define XEM_MULTICAST_OPTION 0x00000040UL
+
+/*
+ * Some default values for interrupt coalescing within the scatter-gather
+ * DMA engine.
+ */
+#define XEM_SGDMA_DFT_THRESHOLD 1 /* Default pkt threshold */
+#define XEM_SGDMA_MAX_THRESHOLD 255 /* Maximum pkt theshold */
+#define XEM_SGDMA_DFT_WAITBOUND 5 /* Default pkt wait bound (msec) */
+#define XEM_SGDMA_MAX_WAITBOUND 1023 /* Maximum pkt wait bound (msec) */
+
+/*
+ * Direction identifiers. These are used for setting values like packet
+ * thresholds and wait bound for specific channels
+ */
+#define XEM_SEND 1
+#define XEM_RECV 2
+
+/*
+ * Arguments to SgSend function to indicate whether to hold off starting
+ * the scatter-gather engine.
+ */
+#define XEM_SGDMA_NODELAY 0 /* start SG DMA immediately */
+#define XEM_SGDMA_DELAY 1 /* do not start SG DMA */
+
+/*
+ * Constants to determine the configuration of the hardware device. They are
+ * used to allow the driver to verify it can operate with the hardware.
+ */
+#define XEM_CFG_NO_IPIF 0 /* Not supported by the driver */
+#define XEM_CFG_NO_DMA 1 /* No DMA */
+#define XEM_CFG_SIMPLE_DMA 2 /* Simple DMA */
+#define XEM_CFG_DMA_SG 3 /* DMA scatter gather */
+
+/*
+ * The next few constants help upper layers determine the size of memory
+ * pools used for Ethernet buffers and descriptor lists.
+ */
+#define XEM_MAC_ADDR_SIZE 6 /* six-byte MAC address */
+#define XEM_MTU 1500 /* max size of Ethernet frame */
+#define XEM_HDR_SIZE 14 /* size of Ethernet header */
+#define XEM_HDR_VLAN_SIZE 18 /* size of Ethernet header with VLAN */
+#define XEM_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */
+#define XEM_MAX_FRAME_SIZE (XEM_MTU + XEM_HDR_SIZE + XEM_TRL_SIZE)
+#define XEM_MAX_VLAN_FRAME_SIZE (XEM_MTU + XEM_HDR_VLAN_SIZE + XEM_TRL_SIZE)
+
+/*
+ * Define a default number of send and receive buffers
+ */
+#define XEM_MIN_RECV_BUFS 32 /* minimum # of recv buffers */
+#define XEM_DFT_RECV_BUFS 64 /* default # of recv buffers */
+
+#define XEM_MIN_SEND_BUFS 16 /* minimum # of send buffers */
+#define XEM_DFT_SEND_BUFS 32 /* default # of send buffers */
+
+#define XEM_MIN_BUFFERS (XEM_MIN_RECV_BUFS + XEM_MIN_SEND_BUFS)
+#define XEM_DFT_BUFFERS (XEM_DFT_RECV_BUFS + XEM_DFT_SEND_BUFS)
+
+/*
+ * Define the number of send and receive buffer descriptors, used for
+ * scatter-gather DMA
+ */
+#define XEM_MIN_RECV_DESC 16 /* minimum # of recv descriptors */
+#define XEM_DFT_RECV_DESC 32 /* default # of recv descriptors */
+
+#define XEM_MIN_SEND_DESC 8 /* minimum # of send descriptors */
+#define XEM_DFT_SEND_DESC 16 /* default # of send descriptors */
+
+/**************************** Type Definitions *******************************/
+
+/**
+ * Ethernet statistics (see XEmac_GetStats() and XEmac_ClearStats())
+ */
+typedef struct {
+ u32 XmitFrames; /**< Number of frames transmitted */
+ u32 XmitBytes; /**< Number of bytes transmitted */
+ u32 XmitLateCollisionErrors;
+ /**< Number of transmission failures
+ due to late collisions */
+ u32 XmitExcessDeferral; /**< Number of transmission failures
+ due o excess collision deferrals */
+ u32 XmitOverrunErrors; /**< Number of transmit overrun errors */
+ u32 XmitUnderrunErrors; /**< Number of transmit underrun errors */
+ u32 RecvFrames; /**< Number of frames received */
+ u32 RecvBytes; /**< Number of bytes received */
+ u32 RecvFcsErrors; /**< Number of frames discarded due
+ to FCS errors */
+ u32 RecvAlignmentErrors; /**< Number of frames received with
+ alignment errors */
+ u32 RecvOverrunErrors; /**< Number of frames discarded due
+ to overrun errors */
+ u32 RecvUnderrunErrors; /**< Number of recv underrun errors */
+ u32 RecvMissedFrameErrors;
+ /**< Number of frames missed by MAC */
+ u32 RecvCollisionErrors; /**< Number of frames discarded due
+ to collisions */
+ u32 RecvLengthFieldErrors;
+ /**< Number of frames discarded with
+ invalid length field */
+ u32 RecvShortErrors; /**< Number of short frames discarded */
+ u32 RecvLongErrors; /**< Number of long frames discarded */
+ u32 DmaErrors; /**< Number of DMA errors since init */
+ u32 FifoErrors; /**< Number of FIFO errors since init */
+ u32 RecvInterrupts; /**< Number of receive interrupts */
+ u32 XmitInterrupts; /**< Number of transmit interrupts */
+ u32 EmacInterrupts; /**< Number of MAC (device) interrupts */
+ u32 TotalIntrs; /**< Total interrupts */
+} XEmac_Stats;
+
+/**
+ * This typedef contains configuration information for a device.
+ */
+typedef struct {
+ u16 DeviceId; /**< Unique ID of device */
+ u32 BaseAddress; /**< Register base address */
+ u32 HasCounters; /**< Does device have counters? */
+ u8 IpIfDmaConfig; /**< IPIF/DMA hardware configuration */
+ u32 HasMii; /**< Does device support MII? */
+
+} XEmac_Config;
+
+/** @name Typedefs for callbacks
+ * Callback functions.
+ * @{
+ */
+/**
+ * Callback when data is sent or received with scatter-gather DMA.
+ *
+ * @param CallBackRef is a callback reference passed in by the upper layer
+ * when setting the callback functions, and passed back to the upper
+ * layer when the callback is invoked.
+ * @param BdPtr is a pointer to the first buffer descriptor in a list of
+ * buffer descriptors.
+ * @param NumBds is the number of buffer descriptors in the list pointed
+ * to by BdPtr.
+ */
+typedef void (*XEmac_SgHandler) (void *CallBackRef, XBufDescriptor * BdPtr,
+ u32 NumBds);
+
+/**
+ * Callback when data is sent or received with direct FIFO communication or
+ * simple DMA. The user typically defines two callacks, one for send and one
+ * for receive.
+ *
+ * @param CallBackRef is a callback reference passed in by the upper layer
+ * when setting the callback functions, and passed back to the upper
+ * layer when the callback is invoked.
+ */
+typedef void (*XEmac_FifoHandler) (void *CallBackRef);
+
+/**
+ * Callback when an asynchronous error occurs.
+ *
+ * @param CallBackRef is a callback reference passed in by the upper layer
+ * when setting the callback functions, and passed back to the upper
+ * layer when the callback is invoked.
+ * @param ErrorCode is a Xilinx error code defined in xstatus.h. Also see
+ * XEmac_SetErrorHandler() for a description of possible errors.
+ */
+typedef void (*XEmac_ErrorHandler) (void *CallBackRef, XStatus ErrorCode);
+/*@}*/
+
+/**
+ * The XEmac driver instance data. The user is required to allocate a
+ * variable of this type for every EMAC device in the system. A pointer
+ * to a variable of this type is then passed to the driver API functions.
+ */
+typedef struct {
+ u32 BaseAddress; /* Base address (of IPIF) */
+ u32 IsStarted; /* Device is currently started */
+ u32 IsReady; /* Device is initialized and ready */
+ u32 IsPolled; /* Device is in polled mode */
+ u8 IpIfDmaConfig; /* IPIF/DMA hardware configuration */
+ u32 HasMii; /* Does device support MII? */
+ u32 HasMulticastHash; /* Does device support multicast hash table? */
+
+ XEmac_Stats Stats;
+ XPacketFifoV100b RecvFifo; /* FIFO used to receive frames */
+ XPacketFifoV100b SendFifo; /* FIFO used to send frames */
+
+ /*
+ * Callbacks
+ */
+ XEmac_FifoHandler FifoRecvHandler; /* for non-DMA/simple DMA interrupts */
+ void *FifoRecvRef;
+ XEmac_FifoHandler FifoSendHandler; /* for non-DMA/simple DMA interrupts */
+ void *FifoSendRef;
+ XEmac_ErrorHandler ErrorHandler; /* for asynchronous errors */
+ void *ErrorRef;
+
+ XDmaChannel RecvChannel; /* DMA receive channel driver */
+ XDmaChannel SendChannel; /* DMA send channel driver */
+
+ XEmac_SgHandler SgRecvHandler; /* callback for scatter-gather DMA */
+ void *SgRecvRef;
+ XEmac_SgHandler SgSendHandler; /* callback for scatter-gather DMA */
+ void *SgSendRef;
+} XEmac;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************/
+/**
+*
+* This macro determines if the device is currently configured for
+* scatter-gather DMA.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* Boolean TRUE if the device is configured for scatter-gather DMA, or FALSE
+* if it is not.
+*
+* @note
+*
+* Signature: u32 XEmac_mIsSgDma(XEmac *InstancePtr)
+*
+******************************************************************************/
+#define XEmac_mIsSgDma(InstancePtr) \
+ ((InstancePtr)->IpIfDmaConfig == XEM_CFG_DMA_SG)
+
+/*****************************************************************************/
+/**
+*
+* This macro determines if the device is currently configured for simple DMA.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* Boolean TRUE if the device is configured for simple DMA, or FALSE otherwise
+*
+* @note
+*
+* Signature: u32 XEmac_mIsSimpleDma(XEmac *InstancePtr)
+*
+******************************************************************************/
+#define XEmac_mIsSimpleDma(InstancePtr) \
+ ((InstancePtr)->IpIfDmaConfig == XEM_CFG_SIMPLE_DMA)
+
+/*****************************************************************************/
+/**
+*
+* This macro determines if the device is currently configured with DMA (either
+* simple DMA or scatter-gather DMA)
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* Boolean TRUE if the device is configured with DMA, or FALSE otherwise
+*
+* @note
+*
+* Signature: u32 XEmac_mIsDma(XEmac *InstancePtr)
+*
+******************************************************************************/
+#define XEmac_mIsDma(InstancePtr) \
+ (XEmac_mIsSimpleDma(InstancePtr) || XEmac_mIsSgDma(InstancePtr))
+
+/************************** Function Prototypes ******************************/
+
+/*
+ * Initialization functions in xemac.c
+ */
+XStatus XEmac_Initialize(XEmac * InstancePtr, u16 DeviceId);
+XStatus XEmac_Start(XEmac * InstancePtr);
+XStatus XEmac_Stop(XEmac * InstancePtr);
+void XEmac_Reset(XEmac * InstancePtr);
+XEmac_Config *XEmac_LookupConfig(u16 DeviceId);
+
+/*
+ * Diagnostic functions in xemac_selftest.c
+ */
+XStatus XEmac_SelfTest(XEmac * InstancePtr);
+
+/*
+ * Polled functions in xemac_polled.c
+ */
+XStatus XEmac_PollSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount);
+XStatus XEmac_PollRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr);
+
+/*
+ * Interrupts with scatter-gather DMA functions in xemac_intr_dma.c
+ */
+XStatus XEmac_SgSend(XEmac * InstancePtr, XBufDescriptor * BdPtr, int Delay);
+XStatus XEmac_SgRecv(XEmac * InstancePtr, XBufDescriptor * BdPtr);
+XStatus XEmac_SetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 Threshold);
+XStatus XEmac_GetPktThreshold(XEmac * InstancePtr, u32 Direction,
+ u8 * ThreshPtr);
+XStatus XEmac_SetPktWaitBound(XEmac * InstancePtr, u32 Direction,
+ u32 TimerValue);
+XStatus XEmac_GetPktWaitBound(XEmac * InstancePtr, u32 Direction,
+ u32 * WaitPtr);
+XStatus XEmac_SetSgRecvSpace(XEmac * InstancePtr, u32 * MemoryPtr,
+ u32 ByteCount);
+XStatus XEmac_SetSgSendSpace(XEmac * InstancePtr, u32 * MemoryPtr,
+ u32 ByteCount);
+void XEmac_SetSgRecvHandler(XEmac * InstancePtr, void *CallBackRef,
+ XEmac_SgHandler FuncPtr);
+void XEmac_SetSgSendHandler(XEmac * InstancePtr, void *CallBackRef,
+ XEmac_SgHandler FuncPtr);
+
+void XEmac_IntrHandlerDma(void *InstancePtr); /* interrupt handler */
+
+/*
+ * Interrupts with direct FIFO functions in xemac_intr_fifo.c. Also used
+ * for simple DMA.
+ */
+XStatus XEmac_FifoSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount);
+XStatus XEmac_FifoRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr);
+void XEmac_SetFifoRecvHandler(XEmac * InstancePtr, void *CallBackRef,
+ XEmac_FifoHandler FuncPtr);
+void XEmac_SetFifoSendHandler(XEmac * InstancePtr, void *CallBackRef,
+ XEmac_FifoHandler FuncPtr);
+
+void XEmac_IntrHandlerFifo(void *InstancePtr); /* interrupt handler */
+
+/*
+ * General interrupt-related functions in xemac_intr.c
+ */
+void XEmac_SetErrorHandler(XEmac * InstancePtr, void *CallBackRef,
+ XEmac_ErrorHandler FuncPtr);
+
+/*
+ * MAC configuration in xemac_options.c
+ */
+XStatus XEmac_SetOptions(XEmac * InstancePtr, u32 OptionFlag);
+u32 XEmac_GetOptions(XEmac * InstancePtr);
+XStatus XEmac_SetMacAddress(XEmac * InstancePtr, u8 * AddressPtr);
+void XEmac_GetMacAddress(XEmac * InstancePtr, u8 * BufferPtr);
+XStatus XEmac_SetInterframeGap(XEmac * InstancePtr, u8 Part1, u8 Part2);
+void XEmac_GetInterframeGap(XEmac * InstancePtr, u8 * Part1Ptr, u8 * Part2Ptr);
+
+/*
+ * Multicast functions in xemac_multicast.c (not supported by EMAC yet)
+ */
+XStatus XEmac_MulticastAdd(XEmac * InstancePtr, u8 * AddressPtr);
+XStatus XEmac_MulticastClear(XEmac * InstancePtr);
+
+/*
+ * PHY configuration in xemac_phy.c
+ */
+XStatus XEmac_PhyRead(XEmac * InstancePtr, u32 PhyAddress,
+ u32 RegisterNum, u16 * PhyDataPtr);
+XStatus XEmac_PhyWrite(XEmac * InstancePtr, u32 PhyAddress,
+ u32 RegisterNum, u16 PhyData);
+
+/*
+ * Statistics in xemac_stats.c
+ */
+void XEmac_GetStats(XEmac * InstancePtr, XEmac_Stats * StatsPtr);
+void XEmac_ClearStats(XEmac * InstancePtr);
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/xilinx_enet/xemac_g.c b/board/xilinx/xilinx_enet/xemac_g.c
new file mode 100644
index 0000000..9340f91
--- /dev/null
+++ b/board/xilinx/xilinx_enet/xemac_g.c
@@ -0,0 +1,60 @@
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by libgen.
+* Version: Xilinx EDK 6.1.2 EDK_G.14
+* DO NOT EDIT.
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+* Description: Driver configuration
+*
+*******************************************************************/
+
+#include "xparameters.h"
+#include "xemac.h"
+
+/*
+* The configuration table for devices
+*/
+
+XEmac_Config XEmac_ConfigTable[] = {
+ {
+ XPAR_OPB_ETHERNET_0_DEVICE_ID,
+ XPAR_OPB_ETHERNET_0_BASEADDR,
+ XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST,
+ XPAR_OPB_ETHERNET_0_DMA_PRESENT,
+ XPAR_OPB_ETHERNET_0_MII_EXIST}
+};
diff --git a/board/xilinx/xilinx_enet/xemac_i.h b/board/xilinx/xilinx_enet/xemac_i.h
new file mode 100644
index 0000000..9c160f3
--- /dev/null
+++ b/board/xilinx/xilinx_enet/xemac_i.h
@@ -0,0 +1,207 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemac_i.h
+*
+* This header file contains internal identifiers, which are those shared
+* between XEmac components. The identifiers in this file are not intended for
+* use external to the driver.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a rpm 07/31/01 First release
+* 1.00b rpm 02/20/02 Repartitioned files and functions
+* 1.00b rpm 04/29/02 Moved register definitions to xemac_l.h
+* 1.00c rpm 12/05/02 New version includes support for simple DMA
+* </pre>
+*
+******************************************************************************/
+
+#ifndef XEMAC_I_H /* prevent circular inclusions */
+#define XEMAC_I_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xemac.h"
+#include "xemac_l.h"
+
+/************************** Constant Definitions *****************************/
+
+/*
+ * Default buffer descriptor control word masks. The default send BD control
+ * is set for incrementing the source address by one for each byte transferred,
+ * and specify that the destination address (FIFO) is local to the device. The
+ * default receive BD control is set for incrementing the destination address
+ * by one for each byte transferred, and specify that the source address is
+ * local to the device.
+ */
+#define XEM_DFT_SEND_BD_MASK (XDC_DMACR_SOURCE_INCR_MASK | \
+ XDC_DMACR_DEST_LOCAL_MASK)
+#define XEM_DFT_RECV_BD_MASK (XDC_DMACR_DEST_INCR_MASK | \
+ XDC_DMACR_SOURCE_LOCAL_MASK)
+
+/*
+ * Masks for the IPIF Device Interrupt enable and status registers.
+ */
+#define XEM_IPIF_EMAC_MASK 0x00000004UL /* MAC interrupt */
+#define XEM_IPIF_SEND_DMA_MASK 0x00000008UL /* Send DMA interrupt */
+#define XEM_IPIF_RECV_DMA_MASK 0x00000010UL /* Receive DMA interrupt */
+#define XEM_IPIF_RECV_FIFO_MASK 0x00000020UL /* Receive FIFO interrupt */
+#define XEM_IPIF_SEND_FIFO_MASK 0x00000040UL /* Send FIFO interrupt */
+
+/*
+ * Default IPIF Device Interrupt mask when configured for DMA
+ */
+#define XEM_IPIF_DMA_DFT_MASK (XEM_IPIF_SEND_DMA_MASK | \
+ XEM_IPIF_RECV_DMA_MASK | \
+ XEM_IPIF_EMAC_MASK | \
+ XEM_IPIF_SEND_FIFO_MASK | \
+ XEM_IPIF_RECV_FIFO_MASK)
+
+/*
+ * Default IPIF Device Interrupt mask when configured without DMA
+ */
+#define XEM_IPIF_FIFO_DFT_MASK (XEM_IPIF_EMAC_MASK | \
+ XEM_IPIF_SEND_FIFO_MASK | \
+ XEM_IPIF_RECV_FIFO_MASK)
+
+#define XEM_IPIF_DMA_DEV_INTR_COUNT 7 /* Number of interrupt sources */
+#define XEM_IPIF_FIFO_DEV_INTR_COUNT 5 /* Number of interrupt sources */
+#define XEM_IPIF_DEVICE_INTR_COUNT 7 /* Number of interrupt sources */
+#define XEM_IPIF_IP_INTR_COUNT 22 /* Number of MAC interrupts */
+
+/* a mask for all transmit interrupts, used in polled mode */
+#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK | \
+ XEM_EIR_XMIT_ERROR_MASK | \
+ XEM_EIR_XMIT_SFIFO_EMPTY_MASK | \
+ XEM_EIR_XMIT_LFIFO_FULL_MASK)
+
+/* a mask for all receive interrupts, used in polled mode */
+#define XEM_EIR_RECV_ALL_MASK (XEM_EIR_RECV_DONE_MASK | \
+ XEM_EIR_RECV_ERROR_MASK | \
+ XEM_EIR_RECV_LFIFO_EMPTY_MASK | \
+ XEM_EIR_RECV_LFIFO_OVER_MASK | \
+ XEM_EIR_RECV_LFIFO_UNDER_MASK | \
+ XEM_EIR_RECV_DFIFO_OVER_MASK | \
+ XEM_EIR_RECV_MISSED_FRAME_MASK | \
+ XEM_EIR_RECV_COLLISION_MASK | \
+ XEM_EIR_RECV_FCS_ERROR_MASK | \
+ XEM_EIR_RECV_LEN_ERROR_MASK | \
+ XEM_EIR_RECV_SHORT_ERROR_MASK | \
+ XEM_EIR_RECV_LONG_ERROR_MASK | \
+ XEM_EIR_RECV_ALIGN_ERROR_MASK)
+
+/* a default interrupt mask for scatter-gather DMA operation */
+#define XEM_EIR_DFT_SG_MASK (XEM_EIR_RECV_ERROR_MASK | \
+ XEM_EIR_RECV_LFIFO_OVER_MASK | \
+ XEM_EIR_RECV_LFIFO_UNDER_MASK | \
+ XEM_EIR_XMIT_SFIFO_OVER_MASK | \
+ XEM_EIR_XMIT_SFIFO_UNDER_MASK | \
+ XEM_EIR_XMIT_LFIFO_OVER_MASK | \
+ XEM_EIR_XMIT_LFIFO_UNDER_MASK | \
+ XEM_EIR_RECV_DFIFO_OVER_MASK | \
+ XEM_EIR_RECV_MISSED_FRAME_MASK | \
+ XEM_EIR_RECV_COLLISION_MASK | \
+ XEM_EIR_RECV_FCS_ERROR_MASK | \
+ XEM_EIR_RECV_LEN_ERROR_MASK | \
+ XEM_EIR_RECV_SHORT_ERROR_MASK | \
+ XEM_EIR_RECV_LONG_ERROR_MASK | \
+ XEM_EIR_RECV_ALIGN_ERROR_MASK)
+
+/* a default interrupt mask for non-DMA operation (direct FIFOs) */
+#define XEM_EIR_DFT_FIFO_MASK (XEM_EIR_XMIT_DONE_MASK | \
+ XEM_EIR_RECV_DONE_MASK | \
+ XEM_EIR_DFT_SG_MASK)
+
+/*
+ * Mask for the DMA interrupt enable and status registers when configured
+ * for scatter-gather DMA.
+ */
+#define XEM_DMA_SG_INTR_MASK (XDC_IXR_DMA_ERROR_MASK | \
+ XDC_IXR_PKT_THRESHOLD_MASK | \
+ XDC_IXR_PKT_WAIT_BOUND_MASK | \
+ XDC_IXR_SG_END_MASK)
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************/
+/*
+*
+* Clears a structure of given size, in bytes, by setting each byte to 0.
+*
+* @param StructPtr is a pointer to the structure to be cleared.
+* @param NumBytes is the number of bytes in the structure.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* Signature: void XEmac_mClearStruct(u8 *StructPtr, unsigned int NumBytes)
+*
+******************************************************************************/
+#define XEmac_mClearStruct(StructPtr, NumBytes) \
+{ \
+ int i; \
+ u8 *BytePtr = (u8 *)(StructPtr); \
+ for (i=0; i < (unsigned int)(NumBytes); i++) \
+ { \
+ *BytePtr++ = 0; \
+ } \
+}
+
+/************************** Variable Definitions *****************************/
+
+extern XEmac_Config XEmac_ConfigTable[];
+
+/************************** Function Prototypes ******************************/
+
+void XEmac_CheckEmacError(XEmac * InstancePtr, u32 IntrStatus);
+void XEmac_CheckFifoRecvError(XEmac * InstancePtr);
+void XEmac_CheckFifoSendError(XEmac * InstancePtr);
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/xilinx_enet/xemac_intr.c b/board/xilinx/xilinx_enet/xemac_intr.c
new file mode 100644
index 0000000..b9a2621
--- /dev/null
+++ b/board/xilinx/xilinx_enet/xemac_intr.c
@@ -0,0 +1,402 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemac_intr.c
+*
+* This file contains general interrupt-related functions of the XEmac driver.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a rpm 07/31/01 First release
+* 1.00b rpm 02/20/02 Repartitioned files and functions
+* 1.00c rpm 12/05/02 New version includes support for simple DMA
+* 1.00c rpm 03/31/03 Added comment to indicate that no Receive Length FIFO
+* overrun interrupts occur in v1.00l and later of the EMAC
+* device. This avoids the need to reset the device on
+* receive overruns.
+* </pre>
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xemac_i.h"
+#include "xio.h"
+#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+*
+* Set the callback function for handling asynchronous errors. The upper layer
+* software should call this function during initialization.
+*
+* The error callback is invoked by the driver within interrupt context, so it
+* needs to do its job quickly. If there are potentially slow operations within
+* the callback, these should be done at task-level.
+*
+* The Xilinx errors that must be handled by the callback are:
+* - XST_DMA_ERROR indicates an unrecoverable DMA error occurred. This is
+* typically a bus error or bus timeout. The handler must reset and
+* re-configure the device.
+* - XST_FIFO_ERROR indicates an unrecoverable FIFO error occurred. This is a
+* deadlock condition in the packet FIFO. The handler must reset and
+* re-configure the device.
+* - XST_RESET_ERROR indicates an unrecoverable MAC error occurred, usually an
+* overrun or underrun. The handler must reset and re-configure the device.
+* - XST_DMA_SG_NO_LIST indicates an attempt was made to access a scatter-gather
+* DMA list that has not yet been created.
+* - XST_DMA_SG_LIST_EMPTY indicates the driver tried to get a descriptor from
+* the receive descriptor list, but the list was empty.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param CallBackRef is a reference pointer to be passed back to the adapter in
+* the callback. This helps the adapter correlate the callback to a
+* particular driver.
+* @param FuncPtr is the pointer to the callback function.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+void
+XEmac_SetErrorHandler(XEmac * InstancePtr, void *CallBackRef,
+ XEmac_ErrorHandler FuncPtr)
+{
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(FuncPtr != NULL);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ InstancePtr->ErrorHandler = FuncPtr;
+ InstancePtr->ErrorRef = CallBackRef;
+}
+
+/****************************************************************************/
+/*
+*
+* Check the interrupt status bits of the Ethernet MAC for errors. Errors
+* currently handled are:
+* - Receive length FIFO overrun. Indicates data was lost due to the receive
+* length FIFO becoming full during the reception of a packet. Only a device
+* reset clears this condition.
+* - Receive length FIFO underrun. An attempt to read an empty FIFO. Only a
+* device reset clears this condition.
+* - Transmit status FIFO overrun. Indicates data was lost due to the transmit
+* status FIFO becoming full following the transmission of a packet. Only a
+* device reset clears this condition.
+* - Transmit status FIFO underrun. An attempt to read an empty FIFO. Only a
+* device reset clears this condition.
+* - Transmit length FIFO overrun. Indicates data was lost due to the transmit
+* length FIFO becoming full following the transmission of a packet. Only a
+* device reset clears this condition.
+* - Transmit length FIFO underrun. An attempt to read an empty FIFO. Only a
+* device reset clears this condition.
+* - Receive data FIFO overrun. Indicates data was lost due to the receive data
+* FIFO becoming full during the reception of a packet.
+* - Receive data errors:
+* - Receive missed frame error. Valid data was lost by the MAC.
+* - Receive collision error. Data was lost by the MAC due to a collision.
+* - Receive FCS error. Data was dicarded by the MAC due to FCS error.
+* - Receive length field error. Data was dicarded by the MAC due to an invalid
+* length field in the packet.
+* - Receive short error. Data was dicarded by the MAC because a packet was
+* shorter than allowed.
+* - Receive long error. Data was dicarded by the MAC because a packet was
+* longer than allowed.
+* - Receive alignment error. Data was truncated by the MAC because its length
+* was not byte-aligned.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param IntrStatus is the contents of the interrupt status register to be checked
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* This function is intended for internal use only.
+*
+******************************************************************************/
+void
+XEmac_CheckEmacError(XEmac * InstancePtr, u32 IntrStatus)
+{
+ u32 ResetError = FALSE;
+
+ /*
+ * First check for receive fifo overrun/underrun errors. Most require a
+ * reset by the user to clear, but the data FIFO overrun error does not.
+ */
+ if (IntrStatus & XEM_EIR_RECV_DFIFO_OVER_MASK) {
+ InstancePtr->Stats.RecvOverrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_LFIFO_OVER_MASK) {
+ /*
+ * Receive Length FIFO overrun interrupts no longer occur in v1.00l
+ * and later of the EMAC device. Frames are just dropped by the EMAC
+ * if the length FIFO is full. The user would notice the Receive Missed
+ * Frame count incrementing without any other errors being reported.
+ * This code is left here for backward compatibility with v1.00k and
+ * older EMAC devices.
+ */
+ InstancePtr->Stats.RecvOverrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ ResetError = TRUE; /* requires a reset */
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_LFIFO_UNDER_MASK) {
+ InstancePtr->Stats.RecvUnderrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ ResetError = TRUE; /* requires a reset */
+ }
+
+ /*
+ * Now check for general receive errors. Get the latest count where
+ * available, otherwise just bump the statistic so we know the interrupt
+ * occurred.
+ */
+ if (IntrStatus & XEM_EIR_RECV_ERROR_MASK) {
+ if (IntrStatus & XEM_EIR_RECV_MISSED_FRAME_MASK) {
+ /*
+ * Caused by length FIFO or data FIFO overruns on receive side
+ */
+ InstancePtr->Stats.RecvMissedFrameErrors =
+ XIo_In32(InstancePtr->BaseAddress +
+ XEM_RMFC_OFFSET);
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_COLLISION_MASK) {
+ InstancePtr->Stats.RecvCollisionErrors =
+ XIo_In32(InstancePtr->BaseAddress + XEM_RCC_OFFSET);
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_FCS_ERROR_MASK) {
+ InstancePtr->Stats.RecvFcsErrors =
+ XIo_In32(InstancePtr->BaseAddress +
+ XEM_RFCSEC_OFFSET);
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_LEN_ERROR_MASK) {
+ InstancePtr->Stats.RecvLengthFieldErrors++;
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_SHORT_ERROR_MASK) {
+ InstancePtr->Stats.RecvShortErrors++;
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_LONG_ERROR_MASK) {
+ InstancePtr->Stats.RecvLongErrors++;
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_ALIGN_ERROR_MASK) {
+ InstancePtr->Stats.RecvAlignmentErrors =
+ XIo_In32(InstancePtr->BaseAddress +
+ XEM_RAEC_OFFSET);
+ }
+
+ /*
+ * Bump recv interrupts stats only if not scatter-gather DMA (this
+ * stat gets bumped elsewhere in that case)
+ */
+ if (!XEmac_mIsSgDma(InstancePtr)) {
+ InstancePtr->Stats.RecvInterrupts++; /* TODO: double bump? */
+ }
+
+ }
+
+ /*
+ * Check for transmit errors. These apply to both DMA and non-DMA modes
+ * of operation. The entire device should be reset after overruns or
+ * underruns.
+ */
+ if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
+ XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
+ InstancePtr->Stats.XmitOverrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ ResetError = TRUE;
+ }
+
+ if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
+ XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
+ InstancePtr->Stats.XmitUnderrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ ResetError = TRUE;
+ }
+
+ if (ResetError) {
+ /*
+ * If a reset error occurred, disable the EMAC interrupts since the
+ * reset-causing interrupt(s) is latched in the EMAC - meaning it will
+ * keep occurring until the device is reset. In order to give the higher
+ * layer software time to reset the device, we have to disable the
+ * overrun/underrun interrupts until that happens. We trust that the
+ * higher layer resets the device. We are able to get away with disabling
+ * all EMAC interrupts since the only interrupts it generates are for
+ * error conditions, and we don't care about any more errors right now.
+ */
+ XIIF_V123B_WRITE_IIER(InstancePtr->BaseAddress, 0);
+
+ /*
+ * Invoke the error handler callback, which should result in a reset
+ * of the device by the upper layer software.
+ */
+ InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
+ XST_RESET_ERROR);
+ }
+}
+
+/*****************************************************************************/
+/*
+*
+* Check the receive packet FIFO for errors. FIFO error interrupts are:
+* - Deadlock. See the XPacketFifo component for a description of deadlock on a
+* FIFO.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* Although the function returns void, it can return an asynchronous error to the
+* application through the error handler. It can return XST_FIFO_ERROR if a FIFO
+* error occurred.
+*
+* @note
+*
+* This function is intended for internal use only.
+*
+******************************************************************************/
+void
+XEmac_CheckFifoRecvError(XEmac * InstancePtr)
+{
+ /*
+ * Although the deadlock is currently the only interrupt from a packet
+ * FIFO, make sure it is deadlocked before taking action. There is no
+ * need to clear this interrupt since it requires a reset of the device.
+ */
+ if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->RecvFifo)) {
+ u32 IntrEnable;
+
+ InstancePtr->Stats.FifoErrors++;
+
+ /*
+ * Invoke the error callback function, which should result in a reset
+ * of the device by the upper layer software. We first need to disable
+ * the FIFO interrupt, since otherwise the upper layer thread that
+ * handles the reset may never run because this interrupt condition
+ * doesn't go away until a reset occurs (there is no way to ack it).
+ */
+ IntrEnable = XIIF_V123B_READ_DIER(InstancePtr->BaseAddress);
+ XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
+ IntrEnable & ~XEM_IPIF_RECV_FIFO_MASK);
+
+ InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
+ XST_FIFO_ERROR);
+ }
+}
+
+/*****************************************************************************/
+/*
+*
+* Check the send packet FIFO for errors. FIFO error interrupts are:
+* - Deadlock. See the XPacketFifo component for a description of deadlock on a
+* FIFO.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* Although the function returns void, it can return an asynchronous error to the
+* application through the error handler. It can return XST_FIFO_ERROR if a FIFO
+* error occurred.
+*
+* @note
+*
+* This function is intended for internal use only.
+*
+******************************************************************************/
+void
+XEmac_CheckFifoSendError(XEmac * InstancePtr)
+{
+ /*
+ * Although the deadlock is currently the only interrupt from a packet
+ * FIFO, make sure it is deadlocked before taking action. There is no
+ * need to clear this interrupt since it requires a reset of the device.
+ */
+ if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->SendFifo)) {
+ u32 IntrEnable;
+
+ InstancePtr->Stats.FifoErrors++;
+
+ /*
+ * Invoke the error callback function, which should result in a reset
+ * of the device by the upper layer software. We first need to disable
+ * the FIFO interrupt, since otherwise the upper layer thread that
+ * handles the reset may never run because this interrupt condition
+ * doesn't go away until a reset occurs (there is no way to ack it).
+ */
+ IntrEnable = XIIF_V123B_READ_DIER(InstancePtr->BaseAddress);
+ XIIF_V123B_WRITE_DIER(InstancePtr->BaseAddress,
+ IntrEnable & ~XEM_IPIF_SEND_FIFO_MASK);
+
+ InstancePtr->ErrorHandler(InstancePtr->ErrorRef,
+ XST_FIFO_ERROR);
+ }
+}
diff --git a/board/xilinx/xilinx_enet/xemac_intr_dma.c b/board/xilinx/xilinx_enet/xemac_intr_dma.c
new file mode 100644
index 0000000..567abb4
--- /dev/null
+++ b/board/xilinx/xilinx_enet/xemac_intr_dma.c
@@ -0,0 +1,1344 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemac_intr_dma.c
+*
+* Contains functions used in interrupt mode when configured with scatter-gather
+* DMA.
+*
+* The interrupt handler, XEmac_IntrHandlerDma(), must be connected by the user
+* to the interrupt controller.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- ---------------------------------------------------------
+* 1.00a rpm 07/31/01 First release
+* 1.00b rpm 02/20/02 Repartitioned files and functions
+* 1.00c rpm 12/05/02 New version includes support for simple DMA and the delay
+* argument to SgSend
+* 1.00c rpm 02/03/03 The XST_DMA_SG_COUNT_EXCEEDED return code was removed
+* from SetPktThreshold in the internal DMA driver. Also
+* avoided compiler warnings by initializing Result in the
+* interrupt service routines.
+* 1.00c rpm 03/26/03 Fixed a problem in the interrupt service routines where
+* the interrupt status was toggled clear after a call to
+* ErrorHandler, but if ErrorHandler reset the device the
+* toggle actually asserted the interrupt because the
+* reset had cleared it.
+* </pre>
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xemac_i.h"
+#include "xio.h"
+#include "xbuf_descriptor.h"
+#include "xdma_channel.h"
+#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+static void HandleDmaRecvIntr(XEmac * InstancePtr);
+static void HandleDmaSendIntr(XEmac * InstancePtr);
+static void HandleEmacDmaIntr(XEmac * InstancePtr);
+
+/*****************************************************************************/
+/**
+*
+* Send an Ethernet frame using scatter-gather DMA. The caller attaches the
+* frame to one or more buffer descriptors, then calls this function once for
+* each descriptor. The caller is responsible for allocating and setting up the
+* descriptor. An entire Ethernet frame may or may not be contained within one
+* descriptor. This function simply inserts the descriptor into the scatter-
+* gather engine's transmit list. The caller is responsible for providing mutual
+* exclusion to guarantee that a frame is contiguous in the transmit list. The
+* buffer attached to the descriptor must be word-aligned.
+*
+* The driver updates the descriptor with the device control register before
+* being inserted into the transmit list. If this is the last descriptor in
+* the frame, the inserts are committed, which means the descriptors for this
+* frame are now available for transmission.
+*
+* It is assumed that the upper layer software supplies a correctly formatted
+* Ethernet frame, including the destination and source addresses, the
+* type/length field, and the data field. It is also assumed that upper layer
+* software does not append FCS at the end of the frame.
+*
+* The buffer attached to the descriptor must be word-aligned on the front end.
+*
+* This call is non-blocking. Notification of error or successful transmission
+* is done asynchronously through the send or error callback function.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param BdPtr is the address of a descriptor to be inserted into the transmit
+* ring.
+* @param Delay indicates whether to start the scatter-gather DMA channel
+* immediately, or whether to wait. This allows the user to build up a
+* list of more than one descriptor before starting the transmission of
+* the packets, which allows the application to keep up with DMA and have
+* a constant stream of frames being transmitted. Use XEM_SGDMA_NODELAY or
+* XEM_SGDMA_DELAY, defined in xemac.h, as the value of this argument. If
+* the user chooses to delay and build a list, the user must call this
+* function with the XEM_SGDMA_NODELAY option or call XEmac_Start() to
+* kick off the tranmissions.
+*
+* @return
+*
+* - XST_SUCCESS if the buffer was successfull sent
+* - XST_DEVICE_IS_STOPPED if the Ethernet MAC has not been started yet
+* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode
+* - XST_DMA_SG_LIST_FULL if the descriptor list for the DMA channel is full
+* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into
+* the list because a locked descriptor exists at the insert point
+* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the
+* list, the DMA channel believes there are no new descriptors to commit. If
+* this is ever encountered, there is likely a thread mutual exclusion problem
+* on transmit.
+*
+* @note
+*
+* This function is not thread-safe. The user must provide mutually exclusive
+* access to this function if there are to be multiple threads that can call it.
+*
+* @internal
+*
+* A status that should never be returned from this function, although
+* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device
+* requires a list to be created, and this function requires the device to be
+* started.
+*
+******************************************************************************/
+XStatus
+XEmac_SgSend(XEmac * InstancePtr, XBufDescriptor * BdPtr, int Delay)
+{
+ XStatus Result;
+ u32 BdControl;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(BdPtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * Be sure the device is configured for scatter-gather DMA, then be sure
+ * it is started.
+ */
+ if (!XEmac_mIsSgDma(InstancePtr)) {
+ return XST_NOT_SGDMA;
+ }
+
+ /*
+ * Set some descriptor control word defaults (source address increment
+ * and local destination address) and the destination address
+ * (the FIFO). These are the same for every transmit descriptor.
+ */
+ BdControl = XBufDescriptor_GetControl(BdPtr);
+ XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_SEND_BD_MASK);
+
+ XBufDescriptor_SetDestAddress(BdPtr,
+ InstancePtr->BaseAddress +
+ XEM_PFIFO_TXDATA_OFFSET);
+
+ /*
+ * Put the descriptor in the send list. The DMA component accesses data
+ * here that can also be modified in interrupt context, so a critical
+ * section is required.
+ */
+ XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
+
+ Result = XDmaChannel_PutDescriptor(&InstancePtr->SendChannel, BdPtr);
+ if (Result != XST_SUCCESS) {
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+ return Result;
+ }
+
+ /*
+ * If this is the last buffer in the frame, commit the inserts and start
+ * the DMA engine if necessary
+ */
+ if (XBufDescriptor_IsLastControl(BdPtr)) {
+ Result = XDmaChannel_CommitPuts(&InstancePtr->SendChannel);
+ if (Result != XST_SUCCESS) {
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+ return Result;
+ }
+
+ if (Delay == XEM_SGDMA_NODELAY) {
+ /*
+ * Start the DMA channel. Ignore the return status since we know the
+ * list exists and has at least one entry and we don't care if the
+ * channel is already started. The DMA component accesses data here
+ * that can be modified at interrupt or task levels, so a critical
+ * section is required.
+ */
+ (void) XDmaChannel_SgStart(&InstancePtr->SendChannel);
+ }
+ }
+
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Add a descriptor, with an attached empty buffer, into the receive descriptor
+* list. The buffer attached to the descriptor must be word-aligned. This is
+* used by the upper layer software during initialization when first setting up
+* the receive descriptors, and also during reception of frames to replace
+* filled buffers with empty buffers. This function can be called when the
+* device is started or stopped. Note that it does start the scatter-gather DMA
+* engine. Although this is not necessary during initialization, it is not a
+* problem during initialization because the MAC receiver is not yet started.
+*
+* The buffer attached to the descriptor must be word-aligned on both the front
+* end and the back end.
+*
+* Notification of received frames are done asynchronously through the receive
+* callback function.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param BdPtr is a pointer to the buffer descriptor that will be added to the
+* descriptor list.
+*
+* @return
+*
+* - XST_SUCCESS if a descriptor was successfully returned to the driver
+* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode
+* - XST_DMA_SG_LIST_FULL if the receive descriptor list is full
+* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into
+* the list because a locked descriptor exists at the insert point.
+* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the
+* list, the DMA channel believes there are no new descriptors to commit.
+*
+* @internal
+*
+* A status that should never be returned from this function, although
+* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device
+* requires a list to be created, and this function requires the device to be
+* started.
+*
+******************************************************************************/
+XStatus
+XEmac_SgRecv(XEmac * InstancePtr, XBufDescriptor * BdPtr)
+{
+ XStatus Result;
+ u32 BdControl;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(BdPtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * Be sure the device is configured for scatter-gather DMA
+ */
+ if (!XEmac_mIsSgDma(InstancePtr)) {
+ return XST_NOT_SGDMA;
+ }
+
+ /*
+ * Set some descriptor control word defaults (destination address increment
+ * and local source address) and the source address (the FIFO). These are
+ * the same for every receive descriptor.
+ */
+ BdControl = XBufDescriptor_GetControl(BdPtr);
+ XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_RECV_BD_MASK);
+ XBufDescriptor_SetSrcAddress(BdPtr,
+ InstancePtr->BaseAddress +
+ XEM_PFIFO_RXDATA_OFFSET);
+
+ /*
+ * Put the descriptor into the channel's descriptor list and commit.
+ * Although this function is likely called within interrupt context, there
+ * is the possibility that the upper layer software queues it to a task.
+ * In this case, a critical section is needed here to protect shared data
+ * in the DMA component.
+ */
+ XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress);
+
+ Result = XDmaChannel_PutDescriptor(&InstancePtr->RecvChannel, BdPtr);
+ if (Result != XST_SUCCESS) {
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+ return Result;
+ }
+
+ Result = XDmaChannel_CommitPuts(&InstancePtr->RecvChannel);
+ if (Result != XST_SUCCESS) {
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+ return Result;
+ }
+
+ /*
+ * Start the DMA channel. Ignore the return status since we know the list
+ * exists and has at least one entry and we don't care if the channel is
+ * already started. The DMA component accesses data here that can be
+ * modified at interrupt or task levels, so a critical section is required.
+ */
+ (void) XDmaChannel_SgStart(&InstancePtr->RecvChannel);
+
+ XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress);
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* The interrupt handler for the Ethernet driver when configured with scatter-
+* gather DMA.
+*
+* Get the interrupt status from the IpIf to determine the source of the
+* interrupt. The source can be: MAC, Recv Packet FIFO, Send Packet FIFO, Recv
+* DMA channel, or Send DMA channel. The packet FIFOs only interrupt during
+* "deadlock" conditions.
+*
+* @param InstancePtr is a pointer to the XEmac instance that just interrupted.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+void
+XEmac_IntrHandlerDma(void *InstancePtr)
+{
+ u32 IntrStatus;
+ XEmac *EmacPtr = (XEmac *) InstancePtr;
+
+ EmacPtr->Stats.TotalIntrs++;
+
+ /*
+ * Get the interrupt status from the IPIF. There is no clearing of
+ * interrupts in the IPIF. Interrupts must be cleared at the source.
+ */
+ IntrStatus = XIIF_V123B_READ_DIPR(EmacPtr->BaseAddress);
+
+ /*
+ * See which type of interrupt is being requested, and service it
+ */
+ if (IntrStatus & XEM_IPIF_RECV_DMA_MASK) { /* Receive DMA interrupt */
+ EmacPtr->Stats.RecvInterrupts++;
+ HandleDmaRecvIntr(EmacPtr);
+ }
+
+ if (IntrStatus & XEM_IPIF_SEND_DMA_MASK) { /* Send DMA interrupt */
+ EmacPtr->Stats.XmitInterrupts++;
+ HandleDmaSendIntr(EmacPtr);
+ }
+
+ if (IntrStatus & XEM_IPIF_EMAC_MASK) { /* MAC interrupt */
+ EmacPtr->Stats.EmacInterrupts++;
+ HandleEmacDmaIntr(EmacPtr);
+ }
+
+ if (IntrStatus & XEM_IPIF_RECV_FIFO_MASK) { /* Receive FIFO interrupt */
+ EmacPtr->Stats.RecvInterrupts++;
+ XEmac_CheckFifoRecvError(EmacPtr);
+ }
+
+ if (IntrStatus & XEM_IPIF_SEND_FIFO_MASK) { /* Send FIFO interrupt */
+ EmacPtr->Stats.XmitInterrupts++;
+ XEmac_CheckFifoSendError(EmacPtr);
+ }
+
+ if (IntrStatus & XIIF_V123B_ERROR_MASK) {
+ /*
+ * An error occurred internal to the IPIF. This is more of a debug and
+ * integration issue rather than a production error. Don't do anything
+ * other than clear it, which provides a spot for software to trap
+ * on the interrupt and begin debugging.
+ */
+ XIIF_V123B_WRITE_DISR(EmacPtr->BaseAddress,
+ XIIF_V123B_ERROR_MASK);
+ }
+}
+
+/*****************************************************************************/
+/**
+*
+* Set the packet count threshold for this device. The device must be stopped
+* before setting the threshold. The packet count threshold is used for interrupt
+* coalescing, which reduces the frequency of interrupts from the device to the
+* processor. In this case, the scatter-gather DMA engine only interrupts when
+* the packet count threshold is reached, instead of interrupting for each packet.
+* A packet is a generic term used by the scatter-gather DMA engine, and is
+* equivalent to an Ethernet frame in our case.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param Direction indicates the channel, send or receive, from which the
+* threshold register is read.
+* @param Threshold is the value of the packet threshold count used during
+* interrupt coalescing. A value of 0 disables the use of packet threshold
+* by the hardware.
+*
+* @return
+*
+* - XST_SUCCESS if the threshold was successfully set
+* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
+* - XST_DEVICE_IS_STARTED if the device has not been stopped
+* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
+* asserts would also catch this error.
+*
+* @note
+*
+* The packet threshold could be set to larger than the number of descriptors
+* allocated to the DMA channel. In this case, the wait bound will take over
+* and always indicate data arrival. There was a check in this function that
+* returned an error if the treshold was larger than the number of descriptors,
+* but that was removed because users would then have to set the threshold
+* only after they set descriptor space, which is an order dependency that
+* caused confustion.
+*
+******************************************************************************/
+XStatus
+XEmac_SetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 Threshold)
+{
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * Be sure device is configured for scatter-gather DMA and has been stopped
+ */
+ if (!XEmac_mIsSgDma(InstancePtr)) {
+ return XST_NOT_SGDMA;
+ }
+
+ if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STARTED;
+ }
+
+ /*
+ * Based on the direction, set the packet threshold in the
+ * corresponding DMA channel component. Default to the receive
+ * channel threshold register (if an invalid Direction is passed).
+ */
+ switch (Direction) {
+ case XEM_SEND:
+ return XDmaChannel_SetPktThreshold(&InstancePtr->SendChannel,
+ Threshold);
+
+ case XEM_RECV:
+ return XDmaChannel_SetPktThreshold(&InstancePtr->RecvChannel,
+ Threshold);
+
+ default:
+ return XST_INVALID_PARAM;
+ }
+}
+
+/*****************************************************************************/
+/**
+*
+* Get the value of the packet count threshold for this driver/device. The packet
+* count threshold is used for interrupt coalescing, which reduces the frequency
+* of interrupts from the device to the processor. In this case, the
+* scatter-gather DMA engine only interrupts when the packet count threshold is
+* reached, instead of interrupting for each packet. A packet is a generic term
+* used by the scatter-gather DMA engine, and is equivalent to an Ethernet frame
+* in our case.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param Direction indicates the channel, send or receive, from which the
+* threshold register is read.
+* @param ThreshPtr is a pointer to the byte into which the current value of the
+* packet threshold register will be copied. An output parameter. A value
+* of 0 indicates the use of packet threshold by the hardware is disabled.
+*
+* @return
+*
+* - XST_SUCCESS if the packet threshold was retrieved successfully
+* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
+* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
+* asserts would also catch this error.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XEmac_GetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 * ThreshPtr)
+{
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
+ XASSERT_NONVOID(ThreshPtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ if (!XEmac_mIsSgDma(InstancePtr)) {
+ return XST_NOT_SGDMA;
+ }
+
+ /*
+ * Based on the direction, return the packet threshold set in the
+ * corresponding DMA channel component. Default to the value in
+ * the receive channel threshold register (if an invalid Direction
+ * is passed).
+ */
+ switch (Direction) {
+ case XEM_SEND:
+ *ThreshPtr =
+ XDmaChannel_GetPktThreshold(&InstancePtr->SendChannel);
+ break;
+
+ case XEM_RECV:
+ *ThreshPtr =
+ XDmaChannel_GetPktThreshold(&InstancePtr->RecvChannel);
+ break;
+
+ default:
+ return XST_INVALID_PARAM;
+ }
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Set the packet wait bound timer for this driver/device. The device must be
+* stopped before setting the timer value. The packet wait bound is used during
+* interrupt coalescing to trigger an interrupt when not enough packets have been
+* received to reach the packet count threshold. A packet is a generic term used
+* by the scatter-gather DMA engine, and is equivalent to an Ethernet frame in
+* our case. The timer is in milliseconds.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param Direction indicates the channel, send or receive, from which the
+* threshold register is read.
+* @param TimerValue is the value of the packet wait bound used during interrupt
+* coalescing. It is in milliseconds in the range 0 - 1023. A value of 0
+* disables the packet wait bound timer.
+*
+* @return
+*
+* - XST_SUCCESS if the packet wait bound was set successfully
+* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
+* - XST_DEVICE_IS_STARTED if the device has not been stopped
+* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
+* asserts would also catch this error.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XEmac_SetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 TimerValue)
+{
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
+ XASSERT_NONVOID(TimerValue <= XEM_SGDMA_MAX_WAITBOUND);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * Be sure device is configured for scatter-gather DMA and has been stopped
+ */
+ if (!XEmac_mIsSgDma(InstancePtr)) {
+ return XST_NOT_SGDMA;
+ }
+
+ if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STARTED;
+ }
+
+ /*
+ * Based on the direction, set the packet wait bound in the
+ * corresponding DMA channel component. Default to the receive
+ * channel wait bound register (if an invalid Direction is passed).
+ */
+ switch (Direction) {
+ case XEM_SEND:
+ XDmaChannel_SetPktWaitBound(&InstancePtr->SendChannel,
+ TimerValue);
+ break;
+
+ case XEM_RECV:
+ XDmaChannel_SetPktWaitBound(&InstancePtr->RecvChannel,
+ TimerValue);
+ break;
+
+ default:
+ return XST_INVALID_PARAM;
+ }
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Get the packet wait bound timer for this driver/device. The packet wait bound
+* is used during interrupt coalescing to trigger an interrupt when not enough
+* packets have been received to reach the packet count threshold. A packet is a
+* generic term used by the scatter-gather DMA engine, and is equivalent to an
+* Ethernet frame in our case. The timer is in milliseconds.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param Direction indicates the channel, send or receive, from which the
+* threshold register is read.
+* @param WaitPtr is a pointer to the byte into which the current value of the
+* packet wait bound register will be copied. An output parameter. Units
+* are in milliseconds in the range 0 - 1023. A value of 0 indicates the
+* packet wait bound timer is disabled.
+*
+* @return
+*
+* - XST_SUCCESS if the packet wait bound was retrieved successfully
+* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
+* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on
+* asserts would also catch this error.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XEmac_GetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 * WaitPtr)
+{
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV);
+ XASSERT_NONVOID(WaitPtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ if (!XEmac_mIsSgDma(InstancePtr)) {
+ return XST_NOT_SGDMA;
+ }
+
+ /*
+ * Based on the direction, return the packet wait bound set in the
+ * corresponding DMA channel component. Default to the value in
+ * the receive channel wait bound register (if an invalid Direction
+ * is passed).
+ */
+ switch (Direction) {
+ case XEM_SEND:
+ *WaitPtr =
+ XDmaChannel_GetPktWaitBound(&InstancePtr->SendChannel);
+ break;
+
+ case XEM_RECV:
+ *WaitPtr =
+ XDmaChannel_GetPktWaitBound(&InstancePtr->RecvChannel);
+ break;
+
+ default:
+ return XST_INVALID_PARAM;
+ }
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Give the driver the memory space to be used for the scatter-gather DMA
+* receive descriptor list. This function should only be called once, during
+* initialization of the Ethernet driver. The memory space must be big enough
+* to hold some number of descriptors, depending on the needs of the system.
+* The xemac.h file defines minimum and default numbers of descriptors
+* which can be used to allocate this memory space.
+*
+* The memory space must be word-aligned. An assert will occur if asserts are
+* turned on and the memory is not word-aligned.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param MemoryPtr is a pointer to the word-aligned memory.
+* @param ByteCount is the length, in bytes, of the memory space.
+*
+* @return
+*
+* - XST_SUCCESS if the space was initialized successfully
+* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
+* - XST_DMA_SG_LIST_EXISTS if this list space has already been created
+*
+* @note
+*
+* If the device is configured for scatter-gather DMA, this function must be
+* called AFTER the XEmac_Initialize() function because the DMA channel
+* components must be initialized before the memory space is set.
+*
+******************************************************************************/
+XStatus
+XEmac_SetSgRecvSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount)
+{
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(MemoryPtr != NULL);
+ XASSERT_NONVOID(ByteCount != 0);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ if (!XEmac_mIsSgDma(InstancePtr)) {
+ return XST_NOT_SGDMA;
+ }
+
+ return XDmaChannel_CreateSgList(&InstancePtr->RecvChannel, MemoryPtr,
+ ByteCount);
+}
+
+/*****************************************************************************/
+/**
+*
+* Give the driver the memory space to be used for the scatter-gather DMA
+* transmit descriptor list. This function should only be called once, during
+* initialization of the Ethernet driver. The memory space must be big enough
+* to hold some number of descriptors, depending on the needs of the system.
+* The xemac.h file defines minimum and default numbers of descriptors
+* which can be used to allocate this memory space.
+*
+* The memory space must be word-aligned. An assert will occur if asserts are
+* turned on and the memory is not word-aligned.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param MemoryPtr is a pointer to the word-aligned memory.
+* @param ByteCount is the length, in bytes, of the memory space.
+*
+* @return
+*
+* - XST_SUCCESS if the space was initialized successfully
+* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA
+* - XST_DMA_SG_LIST_EXISTS if this list space has already been created
+*
+* @note
+*
+* If the device is configured for scatter-gather DMA, this function must be
+* called AFTER the XEmac_Initialize() function because the DMA channel
+* components must be initialized before the memory space is set.
+*
+******************************************************************************/
+XStatus
+XEmac_SetSgSendSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount)
+{
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(MemoryPtr != NULL);
+ XASSERT_NONVOID(ByteCount != 0);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ if (!XEmac_mIsSgDma(InstancePtr)) {
+ return XST_NOT_SGDMA;
+ }
+
+ return XDmaChannel_CreateSgList(&InstancePtr->SendChannel, MemoryPtr,
+ ByteCount);
+}
+
+/*****************************************************************************/
+/**
+*
+* Set the callback function for handling received frames in scatter-gather DMA
+* mode. The upper layer software should call this function during
+* initialization. The callback is called once per frame received. The head of
+* a descriptor list is passed in along with the number of descriptors in the
+* list. Before leaving the callback, the upper layer software should attach a
+* new buffer to each descriptor in the list.
+*
+* The callback is invoked by the driver within interrupt context, so it needs
+* to do its job quickly. Sending the received frame up the protocol stack
+* should be done at task-level. If there are other potentially slow operations
+* within the callback, these too should be done at task-level.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param CallBackRef is a reference pointer to be passed back to the adapter in
+* the callback. This helps the adapter correlate the callback to a
+* particular driver.
+* @param FuncPtr is the pointer to the callback function.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+void
+XEmac_SetSgRecvHandler(XEmac * InstancePtr, void *CallBackRef,
+ XEmac_SgHandler FuncPtr)
+{
+ /*
+ * Asserted IsDmaSg here instead of run-time check because there is really
+ * no ill-effects of setting these when not configured for scatter-gather.
+ */
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(FuncPtr != NULL);
+ XASSERT_VOID(XEmac_mIsSgDma(InstancePtr));
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ InstancePtr->SgRecvHandler = FuncPtr;
+ InstancePtr->SgRecvRef = CallBackRef;
+}
+
+/*****************************************************************************/
+/**
+*
+* Set the callback function for handling confirmation of transmitted frames in
+* scatter-gather DMA mode. The upper layer software should call this function
+* during initialization. The callback is called once per frame sent. The head
+* of a descriptor list is passed in along with the number of descriptors in
+* the list. The callback is responsible for freeing buffers attached to these
+* descriptors.
+*
+* The callback is invoked by the driver within interrupt context, so it needs
+* to do its job quickly. If there are potentially slow operations within the
+* callback, these should be done at task-level.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param CallBackRef is a reference pointer to be passed back to the adapter in
+* the callback. This helps the adapter correlate the callback to a
+* particular driver.
+* @param FuncPtr is the pointer to the callback function.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+void
+XEmac_SetSgSendHandler(XEmac * InstancePtr, void *CallBackRef,
+ XEmac_SgHandler FuncPtr)
+{
+ /*
+ * Asserted IsDmaSg here instead of run-time check because there is really
+ * no ill-effects of setting these when not configured for scatter-gather.
+ */
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(FuncPtr != NULL);
+ XASSERT_VOID(XEmac_mIsSgDma(InstancePtr));
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ InstancePtr->SgSendHandler = FuncPtr;
+ InstancePtr->SgSendRef = CallBackRef;
+}
+
+/*****************************************************************************/
+/*
+*
+* Handle an interrupt from the DMA receive channel. DMA interrupts are:
+*
+* - DMA error. DMA encountered a bus error or timeout. This is a fatal error
+* that requires reset of the channel. The driver calls the error handler
+* of the upper layer software with an error code indicating the device should
+* be reset.
+* - Packet count threshold reached. For scatter-gather operations, indicates
+* the threshold for the number of packets not serviced by software has been
+* reached. The driver behaves as follows:
+* - Get the value of the packet counter, which tells us how many packets
+* are ready to be serviced
+* - For each packet
+* - For each descriptor, remove it from the scatter-gather list
+* - Check for the last descriptor in the frame, and if set
+* - Bump frame statistics
+* - Call the scatter-gather receive callback function
+* - Decrement the packet counter by one
+* Note that there are no receive errors reported in the status word of
+* the buffer descriptor. If receive errors occur, the MAC drops the
+* packet, and we only find out about the errors through various error
+* count registers.
+* - Packet wait bound reached. For scatter-gather, indicates the time to wait
+* for the next packet has expired. The driver follows the same logic as when
+* the packet count threshold interrupt is received.
+* - Scatter-gather end acknowledge. Hardware has reached the end of the
+* descriptor list. The driver follows the same logic as when the packet count
+* threshold interrupt is received. In addition, the driver restarts the DMA
+* scatter-gather channel in case there are newly inserted descriptors.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* Although the function returns void, there are asynchronous errors that can
+* be generated (by calling the ErrorHandler) from this function. These are:
+* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from the
+* DMA channel, but there was not one ready for software.
+* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a fatal
+* error that requires reset.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+static void
+HandleDmaRecvIntr(XEmac * InstancePtr)
+{
+ u32 IntrStatus;
+
+ /*
+ * Read the interrupt status
+ */
+ IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->RecvChannel);
+
+ /*
+ * For packet threshold or wait bound interrupts, process desciptors. Also
+ * process descriptors on a SG end acknowledgement, which means the end of
+ * the descriptor list has been reached by the hardware. For receive, this
+ * is potentially trouble since it means the descriptor list is full,
+ * unless software can process enough packets quickly enough so the
+ * hardware has room to put new packets.
+ */
+ if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK |
+ XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) {
+ XStatus Result = XST_SUCCESS;
+ u32 NumFrames;
+ u32 NumProcessed;
+ u32 NumBuffers;
+ u32 NumBytes;
+ u32 IsLast;
+ XBufDescriptor *FirstBdPtr;
+ XBufDescriptor *BdPtr;
+
+ /*
+ * Get the number of unserviced packets
+ */
+ NumFrames = XDmaChannel_GetPktCount(&InstancePtr->RecvChannel);
+
+ for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) {
+ IsLast = FALSE;
+ FirstBdPtr = NULL;
+ NumBuffers = 0;
+ NumBytes = 0;
+
+ /*
+ * For each packet, get the descriptor from the list. On the
+ * last one in the frame, make the callback to the upper layer.
+ */
+ while (!IsLast) {
+ Result =
+ XDmaChannel_GetDescriptor(&InstancePtr->
+ RecvChannel,
+ &BdPtr);
+ if (Result != XST_SUCCESS) {
+ /*
+ * An error getting a buffer descriptor from the list.
+ * This should not happen, but if it does, report it to
+ * the error callback and break out of the loops to service
+ * other interrupts.
+ */
+ InstancePtr->ErrorHandler(InstancePtr->
+ ErrorRef,
+ Result);
+ break;
+ }
+
+ /*
+ * Keep a pointer to the first descriptor in the list, as it
+ * will be passed to the upper layers in a bit. By the fact
+ * that we received this packet means no errors occurred, so
+ * no need to check the device status word for errors.
+ */
+ if (FirstBdPtr == NULL) {
+ FirstBdPtr = BdPtr;
+ }
+
+ NumBytes += XBufDescriptor_GetLength(BdPtr);
+
+ /*
+ * Check to see if this is the last descriptor in the frame,
+ * and if so, set the IsLast flag to get out of the loop.
+ */
+ if (XBufDescriptor_IsLastStatus(BdPtr)) {
+ IsLast = TRUE;
+ }
+
+ /*
+ * Bump the number of buffers in this packet
+ */
+ NumBuffers++;
+
+ } /* end while loop */
+
+ /*
+ * Check for error that occurred inside the while loop, and break
+ * out of the for loop if there was one so other interrupts can
+ * be serviced.
+ */
+ if (Result != XST_SUCCESS) {
+ break;
+ }
+
+ InstancePtr->Stats.RecvFrames++;
+ InstancePtr->Stats.RecvBytes += NumBytes;
+
+ /*
+ * Make the callback to the upper layers, passing it the first
+ * descriptor in the packet and the number of descriptors in the
+ * packet.
+ */
+ InstancePtr->SgRecvHandler(InstancePtr->SgRecvRef,
+ FirstBdPtr, NumBuffers);
+
+ /*
+ * Decrement the packet count register to reflect the fact we
+ * just processed a packet
+ */
+ XDmaChannel_DecrementPktCount(&InstancePtr->
+ RecvChannel);
+
+ } /* end for loop */
+
+ /*
+ * If the interrupt was an end-ack, check the descriptor list again to
+ * see if it is empty. If not, go ahead and restart the scatter-gather
+ * channel. This is to fix a possible race condition where, on receive,
+ * the driver attempted to start a scatter-gather channel that was
+ * already started, which resulted in no action from the XDmaChannel
+ * component. But, just after the XDmaChannel component saw that the
+ * hardware was already started, the hardware stopped because it
+ * reached the end of the list. In that case, this interrupt is
+ * generated and we can restart the hardware here.
+ */
+ if (IntrStatus & XDC_IXR_SG_END_MASK) {
+ /*
+ * Ignore the return status since we know the list exists and we
+ * don't care if the list is empty or the channel is already started.
+ */
+ (void) XDmaChannel_SgStart(&InstancePtr->RecvChannel);
+ }
+ }
+
+ /*
+ * All interrupts are handled (except the error below) so acknowledge
+ * (clear) the interrupts by writing the value read above back to the status
+ * register. The packet count interrupt must be acknowledged after the
+ * decrement, otherwise it will come right back. We clear the interrupts
+ * before we handle the error interrupt because the ErrorHandler should
+ * result in a reset, which clears the interrupt status register. So we
+ * don't want to toggle the interrupt back on by writing the interrupt
+ * status register with an old value after a reset.
+ */
+ XDmaChannel_SetIntrStatus(&InstancePtr->RecvChannel, IntrStatus);
+
+ /*
+ * Check for DMA errors and call the error callback function if an error
+ * occurred (DMA bus or timeout error), which should result in a reset of
+ * the device by the upper layer software.
+ */
+ if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) {
+ InstancePtr->Stats.DmaErrors++;
+ InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR);
+ }
+}
+
+/*****************************************************************************/
+/*
+*
+* Handle an interrupt from the DMA send channel. DMA interrupts are:
+*
+* - DMA error. DMA encountered a bus error or timeout. This is a fatal error
+* that requires reset of the channel. The driver calls the error handler
+* of the upper layer software with an error code indicating the device should
+* be reset.
+* - Packet count threshold reached. For scatter-gather operations, indicates
+* the threshold for the number of packets not serviced by software has been
+* reached. The driver behaves as follows:
+* - Get the value of the packet counter, which tells us how many packets
+* are ready to be serviced
+* - For each packet
+* - For each descriptor, remove it from the scatter-gather list
+* - Check for the last descriptor in the frame, and if set
+* - Bump frame statistics
+* - Call the scatter-gather receive callback function
+* - Decrement the packet counter by one
+* Note that there are no receive errors reported in the status word of
+* the buffer descriptor. If receive errors occur, the MAC drops the
+* packet, and we only find out about the errors through various error
+* count registers.
+* - Packet wait bound reached. For scatter-gather, indicates the time to wait
+* for the next packet has expired. The driver follows the same logic as when
+* the packet count threshold interrupt is received.
+* - Scatter-gather end acknowledge. Hardware has reached the end of the
+* descriptor list. The driver follows the same logic as when the packet count
+* threshold interrupt is received. In addition, the driver restarts the DMA
+* scatter-gather channel in case there are newly inserted descriptors.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* Although the function returns void, there are asynchronous errors
+* that can be generated from this function. These are:
+* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from
+* the DMA channel, but there was not one ready for software.
+* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a
+* fatal error that requires reset.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+static void
+HandleDmaSendIntr(XEmac * InstancePtr)
+{
+ u32 IntrStatus;
+
+ /*
+ * Read the interrupt status
+ */
+ IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->SendChannel);
+
+ /*
+ * For packet threshold or wait bound interrupt, process descriptors. Also
+ * process descriptors on a SG end acknowledgement, which means the end of
+ * the descriptor list has been reached by the hardware. For transmit,
+ * this is a normal condition during times of light traffic. In fact, the
+ * wait bound interrupt may be masked for transmit since the end-ack would
+ * always occur before the wait bound expires.
+ */
+ if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK |
+ XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) {
+ XStatus Result = XST_SUCCESS;
+ u32 NumFrames;
+ u32 NumProcessed;
+ u32 NumBuffers;
+ u32 NumBytes;
+ u32 IsLast;
+ XBufDescriptor *FirstBdPtr;
+ XBufDescriptor *BdPtr;
+
+ /*
+ * Get the number of unserviced packets
+ */
+ NumFrames = XDmaChannel_GetPktCount(&InstancePtr->SendChannel);
+
+ for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) {
+ IsLast = FALSE;
+ FirstBdPtr = NULL;
+ NumBuffers = 0;
+ NumBytes = 0;
+
+ /*
+ * For each frame, traverse the descriptor list and look for
+ * errors. On the last one in the frame, make the callback.
+ */
+ while (!IsLast) {
+ Result =
+ XDmaChannel_GetDescriptor(&InstancePtr->
+ SendChannel,
+ &BdPtr);
+ if (Result != XST_SUCCESS) {
+ /*
+ * An error getting a buffer descriptor from the list.
+ * This should not happen, but if it does, report it to
+ * the error callback and break out of the loops to service
+ * other interrupts
+ */
+ InstancePtr->ErrorHandler(InstancePtr->
+ ErrorRef,
+ Result);
+ break;
+ }
+
+ /*
+ * Keep a pointer to the first descriptor in the list and
+ * check the device status for errors. The device status is
+ * only available in the first descriptor of a packet.
+ */
+ if (FirstBdPtr == NULL) {
+ u32 XmitStatus;
+
+ FirstBdPtr = BdPtr;
+
+ XmitStatus =
+ XBufDescriptor_GetDeviceStatus
+ (BdPtr);
+ if (XmitStatus &
+ XEM_TSR_EXCESS_DEFERRAL_MASK) {
+ InstancePtr->Stats.
+ XmitExcessDeferral++;
+ }
+
+ if (XmitStatus &
+ XEM_TSR_LATE_COLLISION_MASK) {
+ InstancePtr->Stats.
+ XmitLateCollisionErrors++;
+ }
+ }
+
+ NumBytes += XBufDescriptor_GetLength(BdPtr);
+
+ /*
+ * Check to see if this is the last descriptor in the frame,
+ * and if so, set the IsLast flag to get out of the loop. The
+ * transmit channel must check the last bit in the control
+ * word, not the status word (the DMA engine does not update
+ * the last bit in the status word for the transmit direction).
+ */
+ if (XBufDescriptor_IsLastControl(BdPtr)) {
+ IsLast = TRUE;
+ }
+
+ /*
+ * Bump the number of buffers in this packet
+ */
+ NumBuffers++;
+
+ } /* end while loop */
+
+ /*
+ * Check for error that occurred inside the while loop, and break
+ * out of the for loop if there was one so other interrupts can
+ * be serviced.
+ */
+ if (Result != XST_SUCCESS) {
+ break;
+ }
+
+ InstancePtr->Stats.XmitFrames++;
+ InstancePtr->Stats.XmitBytes += NumBytes;
+
+ /*
+ * Make the callback to the upper layers, passing it the first
+ * descriptor in the packet and the number of descriptors in the
+ * packet.
+ */
+ InstancePtr->SgSendHandler(InstancePtr->SgSendRef,
+ FirstBdPtr, NumBuffers);
+
+ /*
+ * Decrement the packet count register to reflect the fact we
+ * just processed a packet
+ */
+ XDmaChannel_DecrementPktCount(&InstancePtr->
+ SendChannel);
+
+ } /* end for loop */
+
+ /*
+ * If the interrupt was an end-ack, check the descriptor list again to
+ * see if it is empty. If not, go ahead and restart the scatter-gather
+ * channel. This is to fix a possible race condition where, on transmit,
+ * the driver attempted to start a scatter-gather channel that was
+ * already started, which resulted in no action from the XDmaChannel
+ * component. But, just after the XDmaChannel component saw that the
+ * hardware was already started, the hardware stopped because it
+ * reached the end of the list. In that case, this interrupt is
+ * generated and we can restart the hardware here.
+ */
+ if (IntrStatus & XDC_IXR_SG_END_MASK) {
+ /*
+ * Ignore the return status since we know the list exists and we
+ * don't care if the list is empty or the channel is already started.
+ */
+ (void) XDmaChannel_SgStart(&InstancePtr->SendChannel);
+ }
+ }
+
+ /*
+ * All interrupts are handled (except the error below) so acknowledge
+ * (clear) the interrupts by writing the value read above back to the status
+ * register. The packet count interrupt must be acknowledged after the
+ * decrement, otherwise it will come right back. We clear the interrupts
+ * before we handle the error interrupt because the ErrorHandler should
+ * result in a reset, which clears the interrupt status register. So we
+ * don't want to toggle the interrupt back on by writing the interrupt
+ * status register with an old value after a reset.
+ */
+ XDmaChannel_SetIntrStatus(&InstancePtr->SendChannel, IntrStatus);
+
+ /*
+ * Check for DMA errors and call the error callback function if an error
+ * occurred (DMA bus or timeout error), which should result in a reset of
+ * the device by the upper layer software.
+ */
+ if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) {
+ InstancePtr->Stats.DmaErrors++;
+ InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR);
+ }
+}
+
+/*****************************************************************************/
+/*
+*
+* Handle an interrupt from the Ethernet MAC when configured with scatter-gather
+* DMA. The only interrupts handled in this case are errors.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+static void
+HandleEmacDmaIntr(XEmac * InstancePtr)
+{
+ u32 IntrStatus;
+
+ /*
+ * When configured with DMA, the EMAC generates interrupts only when errors
+ * occur. We clear the interrupts immediately so that any latched status
+ * interrupt bits will reflect the true status of the device, and so any
+ * pulsed interrupts (non-status) generated during the Isr will not be lost.
+ */
+ IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
+ XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, IntrStatus);
+
+ /*
+ * Check the MAC for errors
+ */
+ XEmac_CheckEmacError(InstancePtr, IntrStatus);
+}
diff --git a/board/xilinx/xilinx_enet/xemac_l.h b/board/xilinx/xilinx_enet/xemac_l.h
new file mode 100644
index 0000000..a463937
--- /dev/null
+++ b/board/xilinx/xilinx_enet/xemac_l.h
@@ -0,0 +1,462 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemac_l.h
+*
+* This header file contains identifiers and low-level driver functions (or
+* macros) that can be used to access the device. High-level driver functions
+* are defined in xemac.h.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00b rpm 04/26/02 First release
+* 1.00b rmm 09/23/02 Added XEmac_mPhyReset macro
+* 1.00c rpm 12/05/02 New version includes support for simple DMA
+* </pre>
+*
+******************************************************************************/
+
+#ifndef XEMAC_L_H /* prevent circular inclusions */
+#define XEMAC_L_H /* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xio.h"
+
+/************************** Constant Definitions *****************************/
+
+/* Offset of the MAC registers from the IPIF base address */
+#define XEM_REG_OFFSET 0x1100UL
+
+/*
+ * Register offsets for the Ethernet MAC. Each register is 32 bits.
+ */
+#define XEM_EMIR_OFFSET (XEM_REG_OFFSET + 0x0) /* EMAC Module ID */
+#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */
+#define XEM_IFGP_OFFSET (XEM_REG_OFFSET + 0x8) /* Interframe Gap */
+#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */
+#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */
+#define XEM_MGTCR_OFFSET (XEM_REG_OFFSET + 0x14) /* MII mgmt control */
+#define XEM_MGTDR_OFFSET (XEM_REG_OFFSET + 0x18) /* MII mgmt data */
+#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */
+#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */
+#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */
+#define XEM_RMFC_OFFSET (XEM_REG_OFFSET + 0x28) /* Rx missed frames */
+#define XEM_RCC_OFFSET (XEM_REG_OFFSET + 0x2C) /* Rx collisions */
+#define XEM_RFCSEC_OFFSET (XEM_REG_OFFSET + 0x30) /* Rx FCS errors */
+#define XEM_RAEC_OFFSET (XEM_REG_OFFSET + 0x34) /* Rx alignment errors */
+#define XEM_TEDC_OFFSET (XEM_REG_OFFSET + 0x38) /* Transmit excess
+ * deferral cnt */
+
+/*
+ * Register offsets for the IPIF components
+ */
+#define XEM_ISR_OFFSET 0x20UL /* Interrupt status */
+
+#define XEM_DMA_OFFSET 0x2300UL
+#define XEM_DMA_SEND_OFFSET (XEM_DMA_OFFSET + 0x0) /* DMA send channel */
+#define XEM_DMA_RECV_OFFSET (XEM_DMA_OFFSET + 0x40) /* DMA recv channel */
+
+#define XEM_PFIFO_OFFSET 0x2000UL
+#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0) /* Tx registers */
+#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10) /* Rx registers */
+#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100) /* Tx keyhole */
+#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200) /* Rx keyhole */
+
+/*
+ * EMAC Module Identification Register (EMIR)
+ */
+#define XEM_EMIR_VERSION_MASK 0xFFFF0000UL /* Device version */
+#define XEM_EMIR_TYPE_MASK 0x0000FF00UL /* Device type */
+
+/*
+ * EMAC Control Register (ECR)
+ */
+#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL /* Full duplex mode */
+#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL /* Reset transmitter */
+#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL /* Enable transmitter */
+#define XEM_ECR_RECV_RESET_MASK 0x10000000UL /* Reset receiver */
+#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL /* Enable receiver */
+#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL /* Enable PHY */
+#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL /* Enable xmit pad insert */
+#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL /* Enable xmit FCS insert */
+#define XEM_ECR_XMIT_ADDR_INSERT_MASK 0x00800000UL /* Enable xmit source addr
+ * insertion */
+#define XEM_ECR_XMIT_ERROR_INSERT_MASK 0x00400000UL /* Insert xmit error */
+#define XEM_ECR_XMIT_ADDR_OVWRT_MASK 0x00200000UL /* Enable xmit source addr
+ * overwrite */
+#define XEM_ECR_LOOPBACK_MASK 0x00100000UL /* Enable internal
+ * loopback */
+#define XEM_ECR_RECV_STRIP_ENABLE_MASK 0x00080000UL /* Enable recv pad/fcs strip */
+#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL /* Enable unicast addr */
+#define XEM_ECR_MULTI_ENABLE_MASK 0x00010000UL /* Enable multicast addr */
+#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL /* Enable broadcast addr */
+#define XEM_ECR_PROMISC_ENABLE_MASK 0x00004000UL /* Enable promiscuous mode */
+#define XEM_ECR_RECV_ALL_MASK 0x00002000UL /* Receive all frames */
+#define XEM_ECR_RESERVED2_MASK 0x00001000UL /* Reserved */
+#define XEM_ECR_MULTI_HASH_ENABLE_MASK 0x00000800UL /* Enable multicast hash */
+#define XEM_ECR_PAUSE_FRAME_MASK 0x00000400UL /* Interpret pause frames */
+#define XEM_ECR_CLEAR_HASH_MASK 0x00000200UL /* Clear hash table */
+#define XEM_ECR_ADD_HASH_ADDR_MASK 0x00000100UL /* Add hash table address */
+
+/*
+ * Interframe Gap Register (IFGR)
+ */
+#define XEM_IFGP_PART1_MASK 0xF8000000UL /* Interframe Gap Part1 */
+#define XEM_IFGP_PART1_SHIFT 27
+#define XEM_IFGP_PART2_MASK 0x07C00000UL /* Interframe Gap Part2 */
+#define XEM_IFGP_PART2_SHIFT 22
+
+/*
+ * Station Address High Register (SAH)
+ */
+#define XEM_SAH_ADDR_MASK 0x0000FFFFUL /* Station address high bytes */
+
+/*
+ * Station Address Low Register (SAL)
+ */
+#define XEM_SAL_ADDR_MASK 0xFFFFFFFFUL /* Station address low bytes */
+
+/*
+ * MII Management Control Register (MGTCR)
+ */
+#define XEM_MGTCR_START_MASK 0x80000000UL /* Start/Busy */
+#define XEM_MGTCR_RW_NOT_MASK 0x40000000UL /* Read/Write Not (direction) */
+#define XEM_MGTCR_PHY_ADDR_MASK 0x3E000000UL /* PHY address */
+#define XEM_MGTCR_PHY_ADDR_SHIFT 25 /* PHY address shift */
+#define XEM_MGTCR_REG_ADDR_MASK 0x01F00000UL /* Register address */
+#define XEM_MGTCR_REG_ADDR_SHIFT 20 /* Register addr shift */
+#define XEM_MGTCR_MII_ENABLE_MASK 0x00080000UL /* Enable MII from EMAC */
+#define XEM_MGTCR_RD_ERROR_MASK 0x00040000UL /* MII mgmt read error */
+
+/*
+ * MII Management Data Register (MGTDR)
+ */
+#define XEM_MGTDR_DATA_MASK 0x0000FFFFUL /* MII data */
+
+/*
+ * Receive Packet Length Register (RPLR)
+ */
+#define XEM_RPLR_LENGTH_MASK 0x0000FFFFUL /* Receive packet length */
+
+/*
+ * Transmit Packet Length Register (TPLR)
+ */
+#define XEM_TPLR_LENGTH_MASK 0x0000FFFFUL /* Transmit packet length */
+
+/*
+ * Transmit Status Register (TSR)
+ */
+#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL /* Transmit excess deferral */
+#define XEM_TSR_FIFO_UNDERRUN_MASK 0x40000000UL /* Packet FIFO underrun */
+#define XEM_TSR_ATTEMPTS_MASK 0x3E000000UL /* Transmission attempts */
+#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL /* Transmit late collision */
+
+/*
+ * Receive Missed Frame Count (RMFC)
+ */
+#define XEM_RMFC_DATA_MASK 0x0000FFFFUL
+
+/*
+ * Receive Collision Count (RCC)
+ */
+#define XEM_RCC_DATA_MASK 0x0000FFFFUL
+
+/*
+ * Receive FCS Error Count (RFCSEC)
+ */
+#define XEM_RFCSEC_DATA_MASK 0x0000FFFFUL
+
+/*
+ * Receive Alignment Error Count (RALN)
+ */
+#define XEM_RAEC_DATA_MASK 0x0000FFFFUL
+
+/*
+ * Transmit Excess Deferral Count (TEDC)
+ */
+#define XEM_TEDC_DATA_MASK 0x0000FFFFUL
+
+/*
+ * EMAC Interrupt Registers (Status and Enable) masks. These registers are
+ * part of the IPIF IP Interrupt registers
+ */
+#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL /* Xmit complete */
+#define XEM_EIR_RECV_DONE_MASK 0x00000002UL /* Recv complete */
+#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL /* Xmit error */
+#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL /* Recv error */
+#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL /* Xmit status fifo empty */
+#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL /* Recv length fifo empty */
+#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL /* Xmit length fifo full */
+#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL /* Recv length fifo
+ * overrun */
+#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL /* Recv length fifo
+ * underrun */
+#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL /* Xmit status fifo
+ * overrun */
+#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL /* Transmit status fifo
+ * underrun */
+#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL /* Transmit length fifo
+ * overrun */
+#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL /* Transmit length fifo
+ * underrun */
+#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL /* Transmit pause pkt
+ * received */
+#define XEM_EIR_RECV_DFIFO_OVER_MASK 0x00004000UL /* Receive data fifo
+ * overrun */
+#define XEM_EIR_RECV_MISSED_FRAME_MASK 0x00008000UL /* Receive missed frame
+ * error */
+#define XEM_EIR_RECV_COLLISION_MASK 0x00010000UL /* Receive collision
+ * error */
+#define XEM_EIR_RECV_FCS_ERROR_MASK 0x00020000UL /* Receive FCS error */
+#define XEM_EIR_RECV_LEN_ERROR_MASK 0x00040000UL /* Receive length field
+ * error */
+#define XEM_EIR_RECV_SHORT_ERROR_MASK 0x00080000UL /* Receive short frame
+ * error */
+#define XEM_EIR_RECV_LONG_ERROR_MASK 0x00100000UL /* Receive long frame
+ * error */
+#define XEM_EIR_RECV_ALIGN_ERROR_MASK 0x00200000UL /* Receive alignment
+ * error */
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************
+*
+* Low-level driver macros and functions. The list below provides signatures
+* to help the user use the macros.
+*
+* u32 XEmac_mReadReg(u32 BaseAddress, int RegOffset)
+* void XEmac_mWriteReg(u32 BaseAddress, int RegOffset, u32 Mask)
+*
+* void XEmac_mSetControlReg(u32 BaseAddress, u32 Mask)
+* void XEmac_mSetMacAddress(u32 BaseAddress, u8 *AddressPtr)
+*
+* void XEmac_mEnable(u32 BaseAddress)
+* void XEmac_mDisable(u32 BaseAddress)
+*
+* u32 XEmac_mIsTxDone(u32 BaseAddress)
+* u32 XEmac_mIsRxEmpty(u32 BaseAddress)
+*
+* void XEmac_SendFrame(u32 BaseAddress, u8 *FramePtr, int Size)
+* int XEmac_RecvFrame(u32 BaseAddress, u8 *FramePtr)
+*
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*
+* Read the given register.
+*
+* @param BaseAddress is the base address of the device
+* @param RegOffset is the register offset to be read
+*
+* @return The 32-bit value of the register
+*
+* @note None.
+*
+*****************************************************************************/
+#define XEmac_mReadReg(BaseAddress, RegOffset) \
+ XIo_In32((BaseAddress) + (RegOffset))
+
+/****************************************************************************/
+/**
+*
+* Write the given register.
+*
+* @param BaseAddress is the base address of the device
+* @param RegOffset is the register offset to be written
+* @param Data is the 32-bit value to write to the register
+*
+* @return None.
+*
+* @note None.
+*
+*****************************************************************************/
+#define XEmac_mWriteReg(BaseAddress, RegOffset, Data) \
+ XIo_Out32((BaseAddress) + (RegOffset), (Data))
+
+/****************************************************************************/
+/**
+*
+* Set the contents of the control register. Use the XEM_ECR_* constants
+* defined above to create the bit-mask to be written to the register.
+*
+* @param BaseAddress is the base address of the device
+* @param Mask is the 16-bit value to write to the control register
+*
+* @return None.
+*
+* @note None.
+*
+*****************************************************************************/
+#define XEmac_mSetControlReg(BaseAddress, Mask) \
+ XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, (Mask))
+
+/****************************************************************************/
+/**
+*
+* Set the station address of the EMAC device.
+*
+* @param BaseAddress is the base address of the device
+* @param AddressPtr is a pointer to a 6-byte MAC address
+*
+* @return None.
+*
+* @note None.
+*
+*****************************************************************************/
+#define XEmac_mSetMacAddress(BaseAddress, AddressPtr) \
+{ \
+ u32 MacAddr; \
+ \
+ MacAddr = ((AddressPtr)[0] << 8) | (AddressPtr)[1]; \
+ XIo_Out32((BaseAddress) + XEM_SAH_OFFSET, MacAddr); \
+ \
+ MacAddr = ((AddressPtr)[2] << 24) | ((AddressPtr)[3] << 16) | \
+ ((AddressPtr)[4] << 8) | (AddressPtr)[5]; \
+ \
+ XIo_Out32((BaseAddress) + XEM_SAL_OFFSET, MacAddr); \
+}
+
+/****************************************************************************/
+/**
+*
+* Enable the transmitter and receiver. Preserve the contents of the control
+* register.
+*
+* @param BaseAddress is the base address of the device
+*
+* @return None.
+*
+* @note None.
+*
+*****************************************************************************/
+#define XEmac_mEnable(BaseAddress) \
+{ \
+ u32 Control; \
+ Control = XIo_In32((BaseAddress) + XEM_ECR_OFFSET); \
+ Control &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK); \
+ Control |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); \
+ XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \
+}
+
+/****************************************************************************/
+/**
+*
+* Disable the transmitter and receiver. Preserve the contents of the control
+* register.
+*
+* @param BaseAddress is the base address of the device
+*
+* @return None.
+*
+* @note None.
+*
+*****************************************************************************/
+#define XEmac_mDisable(BaseAddress) \
+ XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, \
+ XIo_In32((BaseAddress) + XEM_ECR_OFFSET) & \
+ ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK))
+
+/****************************************************************************/
+/**
+*
+* Check to see if the transmission is complete.
+*
+* @param BaseAddress is the base address of the device
+*
+* @return TRUE if it is done, or FALSE if it is not.
+*
+* @note None.
+*
+*****************************************************************************/
+#define XEmac_mIsTxDone(BaseAddress) \
+ (XIo_In32((BaseAddress) + XEM_ISR_OFFSET) & XEM_EIR_XMIT_DONE_MASK)
+
+/****************************************************************************/
+/**
+*
+* Check to see if the receive FIFO is empty.
+*
+* @param BaseAddress is the base address of the device
+*
+* @return TRUE if it is empty, or FALSE if it is not.
+*
+* @note None.
+*
+*****************************************************************************/
+#define XEmac_mIsRxEmpty(BaseAddress) \
+ (!(XIo_In32((BaseAddress) + XEM_ISR_OFFSET) & XEM_EIR_RECV_DONE_MASK))
+
+/****************************************************************************/
+/**
+*
+* Reset MII compliant PHY
+*
+* @param BaseAddress is the base address of the device
+*
+* @return None.
+*
+* @note None.
+*
+*****************************************************************************/
+#define XEmac_mPhyReset(BaseAddress) \
+{ \
+ u32 Control; \
+ Control = XIo_In32((BaseAddress) + XEM_ECR_OFFSET); \
+ Control &= ~XEM_ECR_PHY_ENABLE_MASK; \
+ XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \
+ Control |= XEM_ECR_PHY_ENABLE_MASK; \
+ XIo_Out32((BaseAddress) + XEM_ECR_OFFSET, Control); \
+}
+
+/************************** Function Prototypes ******************************/
+
+void XEmac_SendFrame(u32 BaseAddress, u8 * FramePtr, int Size);
+int XEmac_RecvFrame(u32 BaseAddress, u8 * FramePtr);
+
+#endif /* end of protection macro */
diff --git a/board/xilinx/xilinx_enet/xemac_options.c b/board/xilinx/xilinx_enet/xemac_options.c
new file mode 100644
index 0000000..1f225f8
--- /dev/null
+++ b/board/xilinx/xilinx_enet/xemac_options.c
@@ -0,0 +1,318 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemac_options.c
+*
+* Functions in this file handle configuration of the XEmac driver.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a rpm 07/31/01 First release
+* 1.00b rpm 02/20/02 Repartitioned files and functions
+* 1.00c rpm 12/05/02 New version includes support for simple DMA
+* </pre>
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xemac_i.h"
+#include "xio.h"
+
+/************************** Constant Definitions *****************************/
+
+#define XEM_MAX_IFG 32 /* Maximum Interframe gap value */
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Function Prototypes ******************************/
+
+/************************** Variable Definitions *****************************/
+
+/*
+ * A table of options and masks. This table maps the user-visible options with
+ * the control register masks. It is used in Set/GetOptions as an alternative
+ * to a series of if/else pairs. Note that the polled options does not have a
+ * corresponding entry in the control register, so it does not exist in the
+ * table.
+ */
+typedef struct {
+ u32 Option;
+ u32 Mask;
+} OptionMap;
+
+static OptionMap OptionsTable[] = {
+ {XEM_UNICAST_OPTION, XEM_ECR_UNICAST_ENABLE_MASK},
+ {XEM_BROADCAST_OPTION, XEM_ECR_BROAD_ENABLE_MASK},
+ {XEM_PROMISC_OPTION, XEM_ECR_PROMISC_ENABLE_MASK},
+ {XEM_FDUPLEX_OPTION, XEM_ECR_FULL_DUPLEX_MASK},
+ {XEM_LOOPBACK_OPTION, XEM_ECR_LOOPBACK_MASK},
+ {XEM_MULTICAST_OPTION, XEM_ECR_MULTI_ENABLE_MASK},
+ {XEM_FLOW_CONTROL_OPTION, XEM_ECR_PAUSE_FRAME_MASK},
+ {XEM_INSERT_PAD_OPTION, XEM_ECR_XMIT_PAD_ENABLE_MASK},
+ {XEM_INSERT_FCS_OPTION, XEM_ECR_XMIT_FCS_ENABLE_MASK},
+ {XEM_INSERT_ADDR_OPTION, XEM_ECR_XMIT_ADDR_INSERT_MASK},
+ {XEM_OVWRT_ADDR_OPTION, XEM_ECR_XMIT_ADDR_OVWRT_MASK},
+ {XEM_STRIP_PAD_FCS_OPTION, XEM_ECR_RECV_STRIP_ENABLE_MASK}
+};
+
+#define XEM_NUM_OPTIONS (sizeof(OptionsTable) / sizeof(OptionMap))
+
+/*****************************************************************************/
+/**
+*
+* Set Ethernet driver/device options. The device must be stopped before
+* calling this function. The options are contained within a bit-mask with each
+* bit representing an option (i.e., you can OR the options together). A one (1)
+* in the bit-mask turns an option on, and a zero (0) turns the option off.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param OptionsFlag is a bit-mask representing the Ethernet options to turn on
+* or off. See xemac.h for a description of the available options.
+*
+* @return
+*
+* - XST_SUCCESS if the options were set successfully
+* - XST_DEVICE_IS_STARTED if the device has not yet been stopped
+*
+* @note
+*
+* This function is not thread-safe and makes use of internal resources that are
+* shared between the Start, Stop, and SetOptions functions, so if one task
+* might be setting device options while another is trying to start the device,
+* protection of this shared data (typically using a semaphore) is required.
+*
+******************************************************************************/
+XStatus
+XEmac_SetOptions(XEmac * InstancePtr, u32 OptionsFlag)
+{
+ u32 ControlReg;
+ int Index;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STARTED;
+ }
+
+ ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
+
+ /*
+ * Loop through the options table, turning the option on or off
+ * depending on whether the bit is set in the incoming options flag.
+ */
+ for (Index = 0; Index < XEM_NUM_OPTIONS; Index++) {
+ if (OptionsFlag & OptionsTable[Index].Option) {
+ ControlReg |= OptionsTable[Index].Mask; /* turn it on */
+ } else {
+ ControlReg &= ~OptionsTable[Index].Mask; /* turn it off */
+ }
+ }
+
+ /*
+ * TODO: need to validate addr-overwrite only if addr-insert?
+ */
+
+ /*
+ * Now write the control register. Leave it to the upper layers
+ * to restart the device.
+ */
+ XIo_Out32(InstancePtr->BaseAddress + XEM_ECR_OFFSET, ControlReg);
+
+ /*
+ * Check the polled option
+ */
+ if (OptionsFlag & XEM_POLLED_OPTION) {
+ InstancePtr->IsPolled = TRUE;
+ } else {
+ InstancePtr->IsPolled = FALSE;
+ }
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Get Ethernet driver/device options. The 32-bit value returned is a bit-mask
+* representing the options. A one (1) in the bit-mask means the option is on,
+* and a zero (0) means the option is off.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+*
+* @return
+*
+* The 32-bit value of the Ethernet options. The value is a bit-mask
+* representing all options that are currently enabled. See xemac.h for a
+* description of the available options.
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+u32
+XEmac_GetOptions(XEmac * InstancePtr)
+{
+ u32 OptionsFlag = 0;
+ u32 ControlReg;
+ int Index;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * Get the control register to determine which options are currently set.
+ */
+ ControlReg = XIo_In32(InstancePtr->BaseAddress + XEM_ECR_OFFSET);
+
+ /*
+ * Loop through the options table to determine which options are set
+ */
+ for (Index = 0; Index < XEM_NUM_OPTIONS; Index++) {
+ if (ControlReg & OptionsTable[Index].Mask) {
+ OptionsFlag |= OptionsTable[Index].Option;
+ }
+ }
+
+ if (InstancePtr->IsPolled) {
+ OptionsFlag |= XEM_POLLED_OPTION;
+ }
+
+ return OptionsFlag;
+}
+
+/*****************************************************************************/
+/**
+*
+* Set the Interframe Gap (IFG), which is the time the MAC delays between
+* transmitting frames. There are two parts required. The total interframe gap
+* is the total of the two parts. The values provided for the Part1 and Part2
+* parameters are multiplied by 4 to obtain the bit-time interval. The first
+* part should be the first 2/3 of the total interframe gap. The MAC will reset
+* the interframe gap timer if carrier sense becomes true during the period
+* defined by interframe gap Part1. Part1 may be shorter than 2/3 the total and
+* can be as small as zero. The second part should be the last 1/3 of the total
+* interframe gap, but can be as large as the total interframe gap. The MAC
+* will not reset the interframe gap timer if carrier sense becomes true during
+* the period defined by interframe gap Part2.
+*
+* The device must be stopped before setting the interframe gap.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param Part1 is the interframe gap part 1 (which will be multiplied by 4 to
+* get the bit-time interval).
+* @param Part2 is the interframe gap part 2 (which will be multiplied by 4 to
+* get the bit-time interval).
+*
+* @return
+*
+* - XST_SUCCESS if the interframe gap was set successfully
+* - XST_DEVICE_IS_STARTED if the device has not been stopped
+*
+* @note
+*
+* None.
+*
+******************************************************************************/
+XStatus
+XEmac_SetInterframeGap(XEmac * InstancePtr, u8 Part1, u8 Part2)
+{
+ u32 Ifg;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(Part1 < XEM_MAX_IFG);
+ XASSERT_NONVOID(Part2 < XEM_MAX_IFG);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * Be sure device has been stopped
+ */
+ if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STARTED;
+ }
+
+ Ifg = Part1 << XEM_IFGP_PART1_SHIFT;
+ Ifg |= (Part2 << XEM_IFGP_PART2_SHIFT);
+ XIo_Out32(InstancePtr->BaseAddress + XEM_IFGP_OFFSET, Ifg);
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Get the interframe gap, parts 1 and 2. See the description of interframe gap
+* above in XEmac_SetInterframeGap().
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param Part1Ptr is a pointer to an 8-bit buffer into which the interframe gap
+* part 1 value will be copied.
+* @param Part2Ptr is a pointer to an 8-bit buffer into which the interframe gap
+* part 2 value will be copied.
+*
+* @return
+*
+* None. The values of the interframe gap parts are copied into the
+* output parameters.
+*
+******************************************************************************/
+void
+XEmac_GetInterframeGap(XEmac * InstancePtr, u8 * Part1Ptr, u8 * Part2Ptr)
+{
+ u32 Ifg;
+
+ XASSERT_VOID(InstancePtr != NULL);
+ XASSERT_VOID(Part1Ptr != NULL);
+ XASSERT_VOID(Part2Ptr != NULL);
+ XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ Ifg = XIo_In32(InstancePtr->BaseAddress + XEM_IFGP_OFFSET);
+ *Part1Ptr = (Ifg & XEM_IFGP_PART1_MASK) >> XEM_IFGP_PART1_SHIFT;
+ *Part2Ptr = (Ifg & XEM_IFGP_PART2_MASK) >> XEM_IFGP_PART2_SHIFT;
+}
diff --git a/board/xilinx/xilinx_enet/xemac_polled.c b/board/xilinx/xilinx_enet/xemac_polled.c
new file mode 100644
index 0000000..23768bc
--- /dev/null
+++ b/board/xilinx/xilinx_enet/xemac_polled.c
@@ -0,0 +1,482 @@
+/******************************************************************************
+*
+* Author: Xilinx, Inc.
+*
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+* FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+* Xilinx hardware products are not intended for use in life support
+* appliances, devices, or systems. Use in such applications is
+* expressly prohibited.
+*
+*
+* (c) Copyright 2002-2004 Xilinx Inc.
+* All rights reserved.
+*
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/**
+*
+* @file xemac_polled.c
+*
+* Contains functions used when the driver is in polled mode. Use the
+* XEmac_SetOptions() function to put the driver into polled mode.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00a rpm 07/31/01 First release
+* 1.00b rpm 02/20/02 Repartitioned files and functions
+* 1.00c rpm 12/05/02 New version includes support for simple DMA
+* </pre>
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xemac_i.h"
+#include "xio.h"
+#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */
+
+/************************** Constant Definitions *****************************/
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+/*****************************************************************************/
+/**
+*
+* Send an Ethernet frame in polled mode. The device/driver must be in polled
+* mode before calling this function. The driver writes the frame directly to
+* the MAC's packet FIFO, then enters a loop checking the device status for
+* completion or error. Statistics are updated if an error occurs. The buffer
+* to be sent must be word-aligned.
+*
+* It is assumed that the upper layer software supplies a correctly formatted
+* Ethernet frame, including the destination and source addresses, the
+* type/length field, and the data field. It is also assumed that upper layer
+* software does not append FCS at the end of the frame.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param BufPtr is a pointer to a word-aligned buffer containing the Ethernet
+* frame to be sent.
+* @param ByteCount is the size of the Ethernet frame.
+*
+* @return
+*
+* - XST_SUCCESS if the frame was sent successfully
+* - XST_DEVICE_IS_STOPPED if the device has not yet been started
+* - XST_NOT_POLLED if the device is not in polled mode
+* - XST_FIFO_NO_ROOM if there is no room in the EMAC's length FIFO for this frame
+* - XST_FIFO_ERROR if the FIFO was overrun or underrun. This error is critical
+* and requires the caller to reset the device.
+* - XST_EMAC_COLLISION if the send failed due to excess deferral or late
+* collision
+*
+* @note
+*
+* There is the possibility that this function will not return if the hardware
+* is broken (i.e., it never sets the status bit indicating that transmission is
+* done). If this is of concern to the user, the user should provide protection
+* from this problem - perhaps by using a different timer thread to monitor the
+* PollSend thread. On a 10Mbps MAC, it takes about 1.21 msecs to transmit a
+* maximum size Ethernet frame (1518 bytes). On a 100Mbps MAC, it takes about
+* 121 usecs to transmit a maximum size Ethernet frame.
+*
+* @internal
+*
+* The EMAC uses FIFOs behind its length and status registers. For this reason,
+* it is important to keep the length, status, and data FIFOs in sync when
+* reading or writing to them.
+*
+******************************************************************************/
+XStatus
+XEmac_PollSend(XEmac * InstancePtr, u8 * BufPtr, u32 ByteCount)
+{
+ u32 IntrStatus;
+ u32 XmitStatus;
+ XStatus Result;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(BufPtr != NULL);
+ XASSERT_NONVOID(ByteCount > XEM_HDR_SIZE); /* send at least 1 byte */
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * Be sure the device is configured for polled mode and it is started
+ */
+ if (!InstancePtr->IsPolled) {
+ return XST_NOT_POLLED;
+ }
+
+ if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STOPPED;
+ }
+
+ /*
+ * Check for overruns and underruns for the transmit status and length
+ * FIFOs and make sure the send packet FIFO is not deadlocked. Any of these
+ * conditions is bad enough that we do not want to continue. The upper layer
+ * software should reset the device to resolve the error.
+ */
+ IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
+
+ /*
+ * Overrun errors
+ */
+ if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
+ XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
+ InstancePtr->Stats.XmitOverrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ return XST_FIFO_ERROR;
+ }
+
+ /*
+ * Underrun errors
+ */
+ if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
+ XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
+ InstancePtr->Stats.XmitUnderrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ return XST_FIFO_ERROR;
+ }
+
+ if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->SendFifo)) {
+ InstancePtr->Stats.FifoErrors++;
+ return XST_FIFO_ERROR;
+ }
+
+ /*
+ * Before writing to the data FIFO, make sure the length FIFO is not
+ * full. The data FIFO might not be full yet even though the length FIFO
+ * is. This avoids an overrun condition on the length FIFO and keeps the
+ * FIFOs in sync.
+ */
+ if (IntrStatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) {
+ /*
+ * Clear the latched LFIFO_FULL bit so next time around the most
+ * current status is represented
+ */
+ XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
+ XEM_EIR_XMIT_LFIFO_FULL_MASK);
+ return XST_FIFO_NO_ROOM;
+ }
+
+ /*
+ * This is a non-blocking write. The packet FIFO returns an error if there
+ * is not enough room in the FIFO for this frame.
+ */
+ Result =
+ XPacketFifoV100b_Write(&InstancePtr->SendFifo, BufPtr, ByteCount);
+ if (Result != XST_SUCCESS) {
+ return Result;
+ }
+
+ /*
+ * Loop on the MAC's status to wait for any pause to complete.
+ */
+ IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
+
+ while ((IntrStatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) {
+ IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
+ /*
+ * Clear the pause status from the transmit status register
+ */
+ XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
+ IntrStatus & XEM_EIR_XMIT_PAUSE_MASK);
+ }
+
+ /*
+ * Set the MAC's transmit packet length register to tell it to transmit
+ */
+ XIo_Out32(InstancePtr->BaseAddress + XEM_TPLR_OFFSET, ByteCount);
+
+ /*
+ * Loop on the MAC's status to wait for the transmit to complete. The
+ * transmit status is in the FIFO when the XMIT_DONE bit is set.
+ */
+ do {
+ IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
+ }
+ while ((IntrStatus & XEM_EIR_XMIT_DONE_MASK) == 0);
+
+ XmitStatus = XIo_In32(InstancePtr->BaseAddress + XEM_TSR_OFFSET);
+
+ InstancePtr->Stats.XmitFrames++;
+ InstancePtr->Stats.XmitBytes += ByteCount;
+
+ /*
+ * Check for various errors, bump statistics, and return an error status.
+ */
+
+ /*
+ * Overrun errors
+ */
+ if (IntrStatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
+ XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
+ InstancePtr->Stats.XmitOverrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ return XST_FIFO_ERROR;
+ }
+
+ /*
+ * Underrun errors
+ */
+ if (IntrStatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
+ XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
+ InstancePtr->Stats.XmitUnderrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ return XST_FIFO_ERROR;
+ }
+
+ /*
+ * Clear the interrupt status register of transmit statuses
+ */
+ XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
+ IntrStatus & XEM_EIR_XMIT_ALL_MASK);
+
+ /*
+ * Collision errors are stored in the transmit status register
+ * instead of the interrupt status register
+ */
+ if (XmitStatus & XEM_TSR_EXCESS_DEFERRAL_MASK) {
+ InstancePtr->Stats.XmitExcessDeferral++;
+ return XST_EMAC_COLLISION_ERROR;
+ }
+
+ if (XmitStatus & XEM_TSR_LATE_COLLISION_MASK) {
+ InstancePtr->Stats.XmitLateCollisionErrors++;
+ return XST_EMAC_COLLISION_ERROR;
+ }
+
+ return XST_SUCCESS;
+}
+
+/*****************************************************************************/
+/**
+*
+* Receive an Ethernet frame in polled mode. The device/driver must be in polled
+* mode before calling this function. The driver receives the frame directly
+* from the MAC's packet FIFO. This is a non-blocking receive, in that if there
+* is no frame ready to be received at the device, the function returns with an
+* error. The MAC's error status is not checked, so statistics are not updated
+* for polled receive. The buffer into which the frame will be received must be
+* word-aligned.
+*
+* @param InstancePtr is a pointer to the XEmac instance to be worked on.
+* @param BufPtr is a pointer to a word-aligned buffer into which the received
+* Ethernet frame will be copied.
+* @param ByteCountPtr is both an input and an output parameter. It is a pointer
+* to a 32-bit word that contains the size of the buffer on entry into the
+* function and the size the received frame on return from the function.
+*
+* @return
+*
+* - XST_SUCCESS if the frame was sent successfully
+* - XST_DEVICE_IS_STOPPED if the device has not yet been started
+* - XST_NOT_POLLED if the device is not in polled mode
+* - XST_NO_DATA if there is no frame to be received from the FIFO
+* - XST_BUFFER_TOO_SMALL if the buffer to receive the frame is too small for
+* the frame waiting in the FIFO.
+*
+* @note
+*
+* Input buffer must be big enough to hold the largest Ethernet frame. Buffer
+* must also be 32-bit aligned.
+*
+* @internal
+*
+* The EMAC uses FIFOs behind its length and status registers. For this reason,
+* it is important to keep the length, status, and data FIFOs in sync when
+* reading or writing to them.
+*
+******************************************************************************/
+XStatus
+XEmac_PollRecv(XEmac * InstancePtr, u8 * BufPtr, u32 * ByteCountPtr)
+{
+ XStatus Result;
+ u32 PktLength;
+ u32 IntrStatus;
+
+ XASSERT_NONVOID(InstancePtr != NULL);
+ XASSERT_NONVOID(BufPtr != NULL);
+ XASSERT_NONVOID(ByteCountPtr != NULL);
+ XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
+
+ /*
+ * Be sure the device is configured for polled mode and it is started
+ */
+ if (!InstancePtr->IsPolled) {
+ return XST_NOT_POLLED;
+ }
+
+ if (InstancePtr->IsStarted != XCOMPONENT_IS_STARTED) {
+ return XST_DEVICE_IS_STOPPED;
+ }
+
+ /*
+ * Make sure the buffer is big enough to hold the maximum frame size.
+ * We need to do this because as soon as we read the MAC's packet length
+ * register, which is actually a FIFO, we remove that length from the
+ * FIFO. We do not want to read the length FIFO without also reading the
+ * data FIFO since this would get the FIFOs out of sync. So we have to
+ * make this restriction.
+ */
+ if (*ByteCountPtr < XEM_MAX_FRAME_SIZE) {
+ return XST_BUFFER_TOO_SMALL;
+ }
+
+ /*
+ * First check for packet FIFO deadlock and return an error if it has
+ * occurred. A reset by the caller is necessary to correct this problem.
+ */
+ if (XPF_V100B_IS_DEADLOCKED(&InstancePtr->RecvFifo)) {
+ InstancePtr->Stats.FifoErrors++;
+ return XST_FIFO_ERROR;
+ }
+
+ /*
+ * Get the interrupt status to know what happened (whether an error occurred
+ * and/or whether frames have been received successfully). When clearing the
+ * intr status register, clear only statuses that pertain to receive.
+ */
+ IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
+ XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress,
+ IntrStatus & XEM_EIR_RECV_ALL_MASK);
+
+ /*
+ * Check receive errors and bump statistics so the caller will have a clue
+ * as to why data may not have been received. We continue on if an error
+ * occurred since there still may be frames that were received successfully.
+ */
+ if (IntrStatus & (XEM_EIR_RECV_LFIFO_OVER_MASK |
+ XEM_EIR_RECV_DFIFO_OVER_MASK)) {
+ InstancePtr->Stats.RecvOverrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_LFIFO_UNDER_MASK) {
+ InstancePtr->Stats.RecvUnderrunErrors++;
+ InstancePtr->Stats.FifoErrors++;
+ }
+
+ /*
+ * General receive errors
+ */
+ if (IntrStatus & XEM_EIR_RECV_ERROR_MASK) {
+ if (IntrStatus & XEM_EIR_RECV_MISSED_FRAME_MASK) {
+ InstancePtr->Stats.RecvMissedFrameErrors =
+ XIo_In32(InstancePtr->BaseAddress +
+ XEM_RMFC_OFFSET);
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_COLLISION_MASK) {
+ InstancePtr->Stats.RecvCollisionErrors =
+ XIo_In32(InstancePtr->BaseAddress + XEM_RCC_OFFSET);
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_FCS_ERROR_MASK) {
+ InstancePtr->Stats.RecvFcsErrors =
+ XIo_In32(InstancePtr->BaseAddress +
+ XEM_RFCSEC_OFFSET);
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_LEN_ERROR_MASK) {
+ InstancePtr->Stats.RecvLengthFieldErrors++;
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_SHORT_ERROR_MASK) {
+ InstancePtr->Stats.RecvShortErrors++;
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_LONG_ERROR_MASK) {
+ InstancePtr->Stats.RecvLongErrors++;
+ }
+
+ if (IntrStatus & XEM_EIR_RECV_ALIGN_ERROR_MASK) {
+ InstancePtr->Stats.RecvAlignmentErrors =
+ XIo_In32(InstancePtr->BaseAddress +
+ XEM_RAEC_OFFSET);
+ }
+ }
+
+ /*
+ * Before reading from the length FIFO, make sure the length FIFO is not
+ * empty. We could cause an underrun error if we try to read from an
+ * empty FIFO.
+ */
+ if ((IntrStatus & XEM_EIR_RECV_DONE_MASK) == 0) {
+ return XST_NO_DATA;
+ }
+
+ /*
+ * Determine, from the MAC, the length of the next packet available
+ * in the data FIFO (there should be a non-zero length here)
+ */
+ PktLength = XIo_In32(InstancePtr->BaseAddress + XEM_RPLR_OFFSET);
+ if (PktLength == 0) {
+ return XST_NO_DATA;
+ }
+
+ /*
+ * Write the RECV_DONE bit in the status register to clear it. This bit
+ * indicates the RPLR is non-empty, and we know it's set at this point.
+ * We clear it so that subsequent entry into this routine will reflect the
+ * current status. This is done because the non-empty bit is latched in the
+ * IPIF, which means it may indicate a non-empty condition even though
+ * there is something in the FIFO.
+ */
+ XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, XEM_EIR_RECV_DONE_MASK);
+
+ /*
+ * We assume that the MAC never has a length bigger than the largest
+ * Ethernet frame, so no need to make another check here.
+ */
+
+ /*
+ * This is a non-blocking read. The FIFO returns an error if there is
+ * not at least the requested amount of data in the FIFO.
+ */
+ Result =
+ XPacketFifoV100b_Read(&InstancePtr->RecvFifo, BufPtr, PktLength);
+ if (Result != XST_SUCCESS) {
+ return Result;
+ }
+
+ InstancePtr->Stats.RecvFrames++;
+ InstancePtr->Stats.RecvBytes += PktLength;
+
+ *ByteCountPtr = PktLength;
+
+ return XST_SUCCESS;
+}