board: stemmy: Parse atags to get available memory
At the moment the "stemmy" board attempts to detect the RAM size with
a simple memory test (get_ram_size()). Unfortunately, this does not work
correctly for devices with 768 MiB RAM (e.g. Samsung Galaxy Ace 2
(GT-I8160), "codina"). Reading/writing memory after the 768 MiB RAM
succeeds but actually overwrites some earlier parts of the memory.
For U-Boot this does not result in any major problems, but on Linux
this will eventually lead to strange crashes because of the memory
corruption.
Since the "stemmy" U-Boot port is designed to be chainloaded from
the original Samsung bootloader, the most reliable way to get the
available amount of RAM is to look at the ATAGS passed by the Samsung
bootloader. Fortunately, the header used to generate ATAGS in U-Boot
(asm/setup.h) can also be easily used to parse them.
Also clarify and simplify stemmy.h a bit to make it more clear where
some of the magic values in there are actually coming from.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/configs/stemmy_defconfig b/configs/stemmy_defconfig
index 79c05ac..f31960b 100644
--- a/configs/stemmy_defconfig
+++ b/configs/stemmy_defconfig
@@ -1,7 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_U8500=y
CONFIG_SYS_TEXT_BASE=0x100000
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_NR_DRAM_BANKS=2
CONFIG_DEFAULT_DEVICE_TREE="ste-ux500-samsung-stemmy"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_HUSH_PARSER=y