ram: add ddr4 dual x8 configuration
the aspeed ddr sdram controller needs to know if the memory chip mounted on
the board is dual x8 die or not. Or it may get the wrong size of the
memory space.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index a0e859a..a270e13 100644
--- a/drivers/ram/Kconfig
+++ b/drivers/ram/Kconfig
@@ -73,6 +73,7 @@
to support external memories like sdram, psram & nand.
This driver is for the sdram memory interface with the SEMC.
+source "drivers/ram/aspeed/Kconfig"
source "drivers/ram/rockchip/Kconfig"
source "drivers/ram/sifive/Kconfig"
source "drivers/ram/stm32mp1/Kconfig"
diff --git a/drivers/ram/aspeed/Kconfig b/drivers/ram/aspeed/Kconfig
new file mode 100644
index 0000000..020c913
--- /dev/null
+++ b/drivers/ram/aspeed/Kconfig
@@ -0,0 +1,10 @@
+if RAM || SPL_RAM
+config ASPEED_DDR4_DUALX8
+ bool "Enable Dual X8 DDR4 die"
+ depends on DM && OF_CONTROL && ARCH_ASPEED
+ default n
+ help
+ Say Y if dual X8 DDR4 die is used on the board. The aspeed ddr sdram
+ controller needs to know if the memory chip mounted on the board is dual
+ x8 die or not. Or it may get the wrong size of the memory space.
+endif
diff --git a/drivers/ram/aspeed/sdram_ast2500.c b/drivers/ram/aspeed/sdram_ast2500.c
index 8536a70..9f4304c 100644
--- a/drivers/ram/aspeed/sdram_ast2500.c
+++ b/drivers/ram/aspeed/sdram_ast2500.c
@@ -247,7 +247,7 @@
| SDRAM_PCR_RESETN_DIS
| SDRAM_PCR_RGAP_CTRL_EN | SDRAM_PCR_ODT_EN | SDRAM_PCR_ODT_EXT_EN;
const u32 conf = (SDRAM_CONF_CAP_1024M << SDRAM_CONF_CAP_SHIFT)
-#ifdef CONFIG_DUALX8_RAM
+#ifdef CONFIG_ASPEED_DDR4_DUALX8
| SDRAM_CONF_DUALX8
#endif
| SDRAM_CONF_SCRAMBLE | SDRAM_CONF_SCRAMBLE_PAT2 | SDRAM_CONF_DDR4;