| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * Copyright 2022 Google LLC |
| * Written by Simon Glass <sjg@chromium.org> |
| */ |
| |
| #include <common.h> |
| #include <blk.h> |
| #include <dm.h> |
| #include <fs.h> |
| #include <sandbox_host.h> |
| #include <asm/test.h> |
| #include <dm/device-internal.h> |
| #include <dm/test.h> |
| #include <test/test.h> |
| #include <test/ut.h> |
| |
| static const char filename[] = "2MB.ext2.img"; |
| static const char filename2[] = "1MB.fat32.img"; |
| |
| /* Basic test of host interface */ |
| static int dm_test_host(struct unit_test_state *uts) |
| { |
| static char label[] = "test"; |
| struct udevice *dev, *part, *chk, *blk; |
| struct host_sb_plat *plat; |
| struct blk_desc *desc; |
| ulong mem_start; |
| loff_t actwrite; |
| |
| ut_asserteq(-ENODEV, uclass_first_device_err(UCLASS_HOST, &dev)); |
| ut_asserteq(-ENODEV, uclass_first_device_err(UCLASS_PARTITION, &part)); |
| |
| mem_start = ut_check_delta(0); |
| ut_assertok(host_create_device(label, true, &dev)); |
| |
| /* Check that the plat data has been allocated */ |
| plat = dev_get_plat(dev); |
| ut_asserteq_str("test", plat->label); |
| ut_assert(label != plat->label); |
| ut_asserteq(0, plat->fd); |
| |
| /* Attach a file created in test_host.py */ |
| ut_assertok(host_attach_file(dev, filename)); |
| ut_assertok(uclass_first_device_err(UCLASS_HOST, &chk)); |
| ut_asserteq_ptr(chk, dev); |
| |
| ut_asserteq_str(filename, plat->filename); |
| ut_assert(filename != plat->filename); |
| ut_assert(plat->fd != 0); |
| |
| /* Get the block device */ |
| ut_assertok(blk_get_from_parent(dev, &blk)); |
| ut_assertok(device_probe(blk)); |
| |
| /* There should be no partition table in this device */ |
| ut_asserteq(-ENODEV, uclass_first_device_err(UCLASS_PARTITION, &part)); |
| |
| /* Write to a file on the ext4 filesystem */ |
| desc = dev_get_uclass_plat(blk); |
| ut_asserteq(true, desc->removable); |
| ut_assertok(fs_set_blk_dev_with_part(desc, 0)); |
| ut_assertok(fs_write("/testing", 0, 0, 0x1000, &actwrite)); |
| |
| ut_assertok(host_detach_file(dev)); |
| ut_asserteq(0, plat->fd); |
| ut_asserteq(-ENODEV, blk_get_from_parent(dev, &blk)); |
| ut_assertok(device_unbind(dev)); |
| |
| /* check there were no memory leaks */ |
| ut_asserteq(0, ut_check_delta(mem_start)); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_host, UT_TESTF_SCAN_FDT); |
| |
| /* reusing the same label should work */ |
| static int dm_test_host_dup(struct unit_test_state *uts) |
| { |
| static char label[] = "test"; |
| struct udevice *dev, *chk; |
| |
| ut_asserteq(0, uclass_id_count(UCLASS_HOST)); |
| ut_assertok(host_create_device(label, true, &dev)); |
| |
| /* Attach a file created in test_host.py */ |
| ut_assertok(host_attach_file(dev, filename)); |
| ut_assertok(uclass_first_device_err(UCLASS_HOST, &chk)); |
| ut_asserteq_ptr(chk, dev); |
| ut_asserteq(1, uclass_id_count(UCLASS_HOST)); |
| |
| /* Create another device with the same label (should remove old one) */ |
| ut_assertok(host_create_device(label, true, &dev)); |
| |
| /* Attach a different file created in test_host.py */ |
| ut_assertok(host_attach_file(dev, filename2)); |
| ut_assertok(uclass_first_device_err(UCLASS_HOST, &chk)); |
| ut_asserteq_ptr(chk, dev); |
| |
| /* Make sure there is still only one device */ |
| ut_asserteq(1, uclass_id_count(UCLASS_HOST)); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_host_dup, UT_TESTF_SCAN_FDT); |
| |
| /* Basic test of 'host' command */ |
| static int dm_test_cmd_host(struct unit_test_state *uts) |
| { |
| struct udevice *dev, *blk; |
| struct blk_desc *desc; |
| |
| console_record_reset(); |
| |
| /* first check 'host info' with binding */ |
| ut_assertok(run_command("host info", 0)); |
| ut_assert_nextline("dev blocks label path"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_commandf("host bind -r test2 %s", filename)); |
| |
| /* Check the -r flag worked */ |
| ut_assertok(uclass_first_device_err(UCLASS_HOST, &dev)); |
| ut_assertok(blk_get_from_parent(dev, &blk)); |
| desc = dev_get_uclass_plat(blk); |
| ut_asserteq(true, desc->removable); |
| |
| ut_assertok(run_command("host info", 0)); |
| ut_assert_nextline("dev blocks label path"); |
| ut_assert_nextline(" 0 4096 test2 2MB.ext2.img"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_commandf("host bind fat %s", filename2)); |
| |
| /* Check it is not removeable (no '-r') */ |
| ut_assertok(uclass_next_device_err(&dev)); |
| ut_assertok(blk_get_from_parent(dev, &blk)); |
| desc = dev_get_uclass_plat(blk); |
| ut_asserteq(false, desc->removable); |
| |
| ut_assertok(run_command("host info", 0)); |
| ut_assert_nextline("dev blocks label path"); |
| ut_assert_nextline(" 0 4096 test2 2MB.ext2.img"); |
| ut_assert_nextline(" 1 2048 fat 1MB.fat32.img"); |
| ut_assert_console_end(); |
| |
| ut_asserteq(1, run_command("host info test", 0)); |
| ut_assert_nextline("No such device 'test'"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("host info fat", 0)); |
| ut_assert_nextline("dev blocks label path"); |
| ut_assert_nextline(" 1 2048 fat 1MB.fat32.img"); |
| ut_assert_console_end(); |
| |
| /* check 'host dev' */ |
| ut_asserteq(1, run_command("host dev", 0)); |
| ut_assert_nextline("No current host device"); |
| ut_assert_console_end(); |
| |
| ut_asserteq(1, run_command("host dev missing", 0)); |
| ut_assert_nextline("No such device 'missing'"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("host dev fat", 0)); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("host dev", 0)); |
| ut_assert_nextline("Current host device: 1: fat"); |
| ut_assert_console_end(); |
| |
| /* Try a numerical label */ |
| ut_assertok(run_command("host dev 0", 0)); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("host dev", 0)); |
| ut_assert_nextline("Current host device: 0: test2"); |
| ut_assert_console_end(); |
| |
| /* Remove one of the bindings */ |
| ut_assertok(run_commandf("host unbind test2")); |
| |
| /* There should now be no current device */ |
| ut_asserteq(1, run_command("host dev", 0)); |
| ut_assert_nextline("No current host device"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("host info", 0)); |
| ut_assert_nextline("dev blocks label path"); |
| ut_assert_nextline(" 1 2048 fat 1MB.fat32.img"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_cmd_host, UT_TESTF_SCAN_FDT); |