dm: video: Add support for the NXP PTN3460 bridge
This chip provides an eDP to LVDS bridge which is useful for SoCs that don't
support LVDS displays (or it would waste scarce pins). There is no setup
required by this chip, other than to adjust power-down and reset pins, and
those are managed by the uclass.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/video/bridge/Kconfig b/drivers/video/bridge/Kconfig
index 589795d..2a3b6c4 100644
--- a/drivers/video/bridge/Kconfig
+++ b/drivers/video/bridge/Kconfig
@@ -16,3 +16,12 @@
to be connected to an eDP output device such as an SoC that lacks
LVDS capability, or where LVDS requires too many signals to route
on the PCB. Setup parameters are provided in the device tree.
+
+config VIDEO_BRIDGE_NXP_PTN3460
+ bool "Support NXP PTN3460 DP->LVDS bridge"
+ depends on VIDEO_BRIDGE
+ help
+ The NXP PTN3460 is a DisplayPort-to-LVDS (Low voltage differential
+ signalling) converter. It enables an LVDS LCD panel to be connected
+ to an eDP output device such as an SoC that lacks LVDS capability,
+ or where LVDS requires too many signals to route on the PCB.