ARM: uniphier: remove DRAM base address from board parameters
The base address of each DRAM channel can be calculated from other
parameters, so does not need hard-coding. What we need is the size
of each DRAM channel and DRAM_SPARSE flag to decide the start address
of DRAM channel 1.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/mach-uniphier/bcu/bcu-ld4.c b/arch/arm/mach-uniphier/bcu/bcu-ld4.c
index 7557880..a16b24e 100644
--- a/arch/arm/mach-uniphier/bcu/bcu-ld4.c
+++ b/arch/arm/mach-uniphier/bcu/bcu-ld4.c
@@ -24,7 +24,7 @@
writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */
/* Specify DDR channel */
- shift = (bd->dram_ch[1].base - bd->dram_ch[0].base) / 0x04000000 * 4;
+ shift = bd->dram_ch[0].size / 0x04000000 * 4;
writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */
shift -= 32;
diff --git a/arch/arm/mach-uniphier/bcu/bcu-sld3.c b/arch/arm/mach-uniphier/bcu/bcu-sld3.c
index 64efd37..99b318f 100644
--- a/arch/arm/mach-uniphier/bcu/bcu-sld3.c
+++ b/arch/arm/mach-uniphier/bcu/bcu-sld3.c
@@ -28,7 +28,7 @@
writel(0x24440000, BCSCR5);
/* Specify DDR channel */
- shift = (bd->dram_ch[1].base - bd->dram_ch[0].base) / 0x04000000 * 4;
+ shift = bd->dram_ch[0].size / 0x04000000 * 4;
writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */
shift -= 32;
diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c
index 0596451..26dae9e 100644
--- a/arch/arm/mach-uniphier/boards.c
+++ b/arch/arm/mach-uniphier/boards.c
@@ -18,20 +18,18 @@
.dram_freq = 1600,
.dram_nr_ch = 3,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x20000000,
.width = 32,
},
.dram_ch[1] = {
- .base = 0xc0000000,
.size = 0x20000000,
.width = 16,
},
.dram_ch[2] = {
- .base = 0xc0000000,
.size = 0x10000000,
.width = 16,
},
+ .flags = UNIPHIER_BD_DRAM_SPARSE,
};
#endif
@@ -40,12 +38,10 @@
.dram_freq = 1600,
.dram_nr_ch = 2,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x10000000,
.width = 16,
},
.dram_ch[1] = {
- .base = 0x90000000,
.size = 0x10000000,
.width = 16,
},
@@ -59,12 +55,10 @@
.dram_freq = 1600,
.dram_nr_ch = 2,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x20000000,
.width = 32,
},
.dram_ch[1] = {
- .base = 0xa0000000,
.size = 0x20000000,
.width = 32,
},
@@ -75,12 +69,10 @@
.dram_freq = 1600,
.dram_nr_ch = 2,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x40000000,
.width = 32,
},
.dram_ch[1] = {
- .base = 0xc0000000,
.size = 0x40000000,
.width = 32,
},
@@ -92,12 +84,10 @@
.dram_freq = 1333,
.dram_nr_ch = 2,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x10000000,
.width = 16,
},
.dram_ch[1] = {
- .base = 0x90000000,
.size = 0x10000000,
.width = 16,
},
@@ -110,12 +100,10 @@
.dram_freq = 1866,
.dram_nr_ch = 2,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x20000000,
.width = 32,
},
.dram_ch[1] = {
- .base = 0xa0000000,
.size = 0x20000000,
.width = 32,
},
@@ -127,17 +115,14 @@
.dram_freq = 2133,
.dram_nr_ch = 3,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x40000000,
.width = 32,
},
.dram_ch[1] = {
- .base = 0xc0000000,
.size = 0x20000000,
.width = 32,
},
.dram_ch[2] = {
- .base = 0xe0000000,
.size = 0x20000000,
.width = 16,
},
@@ -149,17 +134,14 @@
.dram_freq = 1866,
.dram_nr_ch = 3,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x40000000,
.width = 32,
},
.dram_ch[1] = {
- .base = 0xc0000000,
.size = 0x20000000,
.width = 32,
},
.dram_ch[2] = {
- .base = 0xe0000000,
.size = 0x20000000,
.width = 16,
},
@@ -171,12 +153,10 @@
.dram_freq = 1600,
.dram_nr_ch = 2,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x20000000,
.width = 16,
},
.dram_ch[1] = {
- .base = 0xa0000000,
.size = 0x20000000,
.width = 16,
},
@@ -188,17 +168,14 @@
.dram_freq = 1866,
.dram_nr_ch = 3,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x40000000,
.width = 32,
},
.dram_ch[1] = {
- .base = 0xc0000000,
.size = 0x40000000,
.width = 32,
},
.dram_ch[2] = {
- .base = 0x100000000UL,
.size = 0x40000000,
.width = 32,
},
@@ -209,17 +186,14 @@
.dram_freq = 1866,
.dram_nr_ch = 3,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x40000000,
.width = 32,
},
.dram_ch[1] = {
- .base = 0xc0000000,
.size = 0x40000000,
.width = 32,
},
.dram_ch[2] = {
- .base = 0x100000000UL,
.size = 0x40000000,
.width = 32,
},
@@ -230,12 +204,10 @@
.dram_freq = 1866,
.dram_nr_ch = 2,
.dram_ch[0] = {
- .base = 0x80000000,
.size = 0x20000000,
.width = 32,
},
.dram_ch[1] = {
- .base = 0xc0000000,
.size = 0x40000000,
.width = 32,
},
diff --git a/arch/arm/mach-uniphier/dram_init.c b/arch/arm/mach-uniphier/dram_init.c
index b9b0cd6..d9f6c16 100644
--- a/arch/arm/mach-uniphier/dram_init.c
+++ b/arch/arm/mach-uniphier/dram_init.c
@@ -11,10 +11,12 @@
#include <linux/errno.h>
#include <linux/sizes.h>
-#include "init.h"
#include "sg-regs.h"
#include "soc-info.h"
+#define pr_warn(fmt, args...) printf(fmt, ##args)
+#define pr_err(fmt, args...) printf(fmt, ##args)
+
DECLARE_GLOBAL_DATA_PTR;
struct uniphier_memif_data {
@@ -76,7 +78,12 @@
};
UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_memif_data, uniphier_memif_data)
-static int uniphier_memconf_decode(struct uniphier_dram_ch *dram_ch)
+struct uniphier_dram_map {
+ unsigned long base;
+ unsigned long size;
+};
+
+static int uniphier_memconf_decode(struct uniphier_dram_map *dram_map)
{
const struct uniphier_memif_data *data;
unsigned long size;
@@ -91,7 +98,7 @@
val = readl(SG_MEMCONF);
/* set up ch0 */
- dram_ch[0].base = CONFIG_SYS_SDRAM_BASE;
+ dram_map[0].base = CONFIG_SYS_SDRAM_BASE;
switch (val & SG_MEMCONF_CH0_SZ_MASK) {
case SG_MEMCONF_CH0_SZ_64M:
@@ -117,20 +124,20 @@
if ((val & SG_MEMCONF_CH0_NUM_MASK) == SG_MEMCONF_CH0_NUM_2)
size *= 2;
- dram_ch[0].size = size;
+ dram_map[0].size = size;
/* set up ch1 */
- dram_ch[1].base = dram_ch[0].base + size;
+ dram_map[1].base = dram_map[0].base + size;
if (val & SG_MEMCONF_SPARSEMEM) {
- if (dram_ch[1].base > data->sparse_ch1_base) {
+ if (dram_map[1].base > data->sparse_ch1_base) {
pr_warn("Sparse mem is enabled, but ch0 and ch1 overlap\n");
pr_warn("Only ch0 is available\n");
- dram_ch[1].base = 0;
+ dram_map[1].base = 0;
return 0;
}
- dram_ch[1].base = data->sparse_ch1_base;
+ dram_map[1].base = data->sparse_ch1_base;
}
switch (val & SG_MEMCONF_CH1_SZ_MASK) {
@@ -157,13 +164,13 @@
if ((val & SG_MEMCONF_CH1_NUM_MASK) == SG_MEMCONF_CH1_NUM_2)
size *= 2;
- dram_ch[1].size = size;
+ dram_map[1].size = size;
if (!data->have_ch2 || val & SG_MEMCONF_CH2_DISABLE)
return 0;
/* set up ch2 */
- dram_ch[2].base = dram_ch[1].base + size;
+ dram_map[2].base = dram_map[1].base + size;
switch (val & SG_MEMCONF_CH2_SZ_MASK) {
case SG_MEMCONF_CH2_SZ_64M:
@@ -189,25 +196,25 @@
if ((val & SG_MEMCONF_CH2_NUM_MASK) == SG_MEMCONF_CH2_NUM_2)
size *= 2;
- dram_ch[2].size = size;
+ dram_map[2].size = size;
return 0;
}
int dram_init(void)
{
- struct uniphier_dram_ch dram_ch[UNIPHIER_MAX_NR_DRAM_CH] = {};
+ struct uniphier_dram_map dram_map[3] = {};
int ret, i;
gd->ram_size = 0;
- ret = uniphier_memconf_decode(dram_ch);
+ ret = uniphier_memconf_decode(dram_map);
if (ret)
return ret;
- for (i = 0; i < ARRAY_SIZE(dram_ch); i++) {
+ for (i = 0; i < ARRAY_SIZE(dram_map); i++) {
- if (!dram_ch[i].size)
+ if (!dram_map[i].size)
break;
/*
@@ -215,11 +222,11 @@
* but it does not expect sparse memory. We use the first
* contiguous chunk here.
*/
- if (i > 0 &&
- dram_ch[i - 1].base + dram_ch[i - 1].size < dram_ch[i].base)
+ if (i > 0 && dram_map[i - 1].base + dram_map[i - 1].size <
+ dram_map[i].base)
break;
- gd->ram_size += dram_ch[i].size;
+ gd->ram_size += dram_map[i].size;
}
return 0;
@@ -227,17 +234,17 @@
void dram_init_banksize(void)
{
- struct uniphier_dram_ch dram_ch[UNIPHIER_MAX_NR_DRAM_CH] = {};
+ struct uniphier_dram_map dram_map[3] = {};
int i;
- uniphier_memconf_decode(dram_ch);
+ uniphier_memconf_decode(dram_map);
- for (i = 0; i < ARRAY_SIZE(dram_ch); i++) {
+ for (i = 0; i < ARRAY_SIZE(dram_map); i++) {
if (i >= ARRAY_SIZE(gd->bd->bi_dram))
break;
- gd->bd->bi_dram[i].start = dram_ch[i].base;
- gd->bd->bi_dram[i].size = dram_ch[i].size;
+ gd->bd->bi_dram[i].start = dram_map[i].base;
+ gd->bd->bi_dram[i].size = dram_map[i].size;
}
}
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index 453e68a..c41a5df 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -13,7 +13,6 @@
#define UNIPHIER_MAX_NR_DRAM_CH 3
struct uniphier_dram_ch {
- unsigned long base;
unsigned long size;
unsigned int width;
};
@@ -24,7 +23,8 @@
struct uniphier_dram_ch dram_ch[UNIPHIER_MAX_NR_DRAM_CH];
unsigned int flags;
-#define UNIPHIER_BD_DDR3PLUS BIT(2)
+#define UNIPHIER_BD_DRAM_SPARSE BIT(9)
+#define UNIPHIER_BD_DDR3PLUS BIT(8)
#define UNIPHIER_BD_BOARD_GET_TYPE(f) ((f) & 0x7)
#define UNIPHIER_BD_BOARD_LD20_REF 0 /* LD20 reference */
diff --git a/arch/arm/mach-uniphier/memconf.c b/arch/arm/mach-uniphier/memconf.c
index dcfc645..4ced2cb 100644
--- a/arch/arm/mach-uniphier/memconf.c
+++ b/arch/arm/mach-uniphier/memconf.c
@@ -93,7 +93,7 @@
}
/* is sparse mem? */
- if (bd->dram_ch[0].base + bd->dram_ch[0].size < bd->dram_ch[1].base)
+ if (bd->flags & UNIPHIER_BD_DRAM_SPARSE)
val |= SG_MEMCONF_SPARSEMEM;
if (!have_ch2)