ARM: dts: uniphier: Sync DT with Linux v6.2
Synchronize devicetree sources with Linux v6.2.
- Use GIC interrupt definitions
- Add reg properties in USB-glue and SoC-glue node
- Fix node names to follow the generic names list in DT specification
- Add L2 cache and AHCI nodes
- Update nand and pcie nodes
- And some trivial fixes
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Marek Vasut <marex@denx.de>
diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi
index 1aad4cf..4e21716 100644
--- a/arch/arm/dts/uniphier-ld20.dtsi
+++ b/arch/arm/dts/uniphier-ld20.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -45,6 +46,7 @@
reg = <0 0x000>;
clocks = <&sys_clk 32>;
enable-method = "psci";
+ next-level-cache = <&a72_l2>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
@@ -55,6 +57,7 @@
reg = <0 0x001>;
clocks = <&sys_clk 32>;
enable-method = "psci";
+ next-level-cache = <&a72_l2>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
@@ -65,6 +68,7 @@
reg = <0 0x100>;
clocks = <&sys_clk 33>;
enable-method = "psci";
+ next-level-cache = <&a53_l2>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
};
@@ -75,12 +79,21 @@
reg = <0 0x101>;
clocks = <&sys_clk 33>;
enable-method = "psci";
+ next-level-cache = <&a53_l2>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
};
+
+ a72_l2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ a53_l2: l2-cache1 {
+ compatible = "cache";
+ };
};
- cluster0_opp: opp-table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -118,7 +131,7 @@
};
};
- cluster1_opp: opp-table1 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
@@ -176,10 +189,10 @@
timer {
compatible = "arm,armv8-timer";
- interrupts = <1 13 4>,
- <1 14 4>,
- <1 11 4>,
- <1 10 4>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
};
thermal-zones {
@@ -236,7 +249,7 @@
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 39 4>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
clocks = <&peri_clk 11>;
@@ -249,7 +262,7 @@
reg = <0x54006100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 216 4>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 12>;
@@ -262,7 +275,7 @@
reg = <0x54006200 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 229 4>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
clocks = <&peri_clk 13>;
@@ -275,7 +288,7 @@
reg = <0x54006300 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 230 4>;
+ interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi3>;
clocks = <&peri_clk 14>;
@@ -286,7 +299,7 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
- interrupts = <0 33 4>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
@@ -297,7 +310,7 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
- interrupts = <0 35 4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
@@ -308,7 +321,7 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
- interrupts = <0 37 4>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
@@ -319,7 +332,7 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
- interrupts = <0 177 4>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
@@ -348,7 +361,7 @@
audio@56000000 {
compatible = "socionext,uniphier-ld20-aio";
reg = <0x56000000 0x80000>;
- interrupts = <0 144 4>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aout1>,
<&pinctrl_aoutiec1>;
@@ -431,12 +444,12 @@
};
};
- adamv@57920000 {
+ syscon@57920000 {
compatible = "socionext,uniphier-ld20-adamv",
"simple-mfd", "syscon";
reg = <0x57920000 0x1000>;
- adamv_rst: reset {
+ adamv_rst: reset-controller {
compatible = "socionext,uniphier-ld20-adamv-reset";
#reset-cells = <1>;
};
@@ -448,7 +461,7 @@
reg = <0x58780000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 41 4>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
@@ -462,7 +475,7 @@
reg = <0x58781000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 42 4>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
@@ -475,7 +488,7 @@
reg = <0x58782000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 43 4>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&peri_clk 6>;
resets = <&peri_rst 6>;
clock-frequency = <400000>;
@@ -487,7 +500,7 @@
reg = <0x58783000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 44 4>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
@@ -501,7 +514,7 @@
reg = <0x58784000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 45 4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clocks = <&peri_clk 8>;
@@ -514,7 +527,7 @@
reg = <0x58785000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 25 4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&peri_clk 9>;
resets = <&peri_rst 9>;
clock-frequency = <400000>;
@@ -535,33 +548,33 @@
reg = <0x59801000 0x400>;
};
- sdctrl@59810000 {
+ sdctrl: syscon@59810000 {
compatible = "socionext,uniphier-ld20-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x400>;
- sd_clk: clock {
+ sd_clk: clock-controller {
compatible = "socionext,uniphier-ld20-sd-clock";
#clock-cells = <1>;
};
- sd_rst: reset {
+ sd_rst: reset-controller {
compatible = "socionext,uniphier-ld20-sd-reset";
#reset-cells = <1>;
};
};
- perictrl@59820000 {
+ syscon@59820000 {
compatible = "socionext,uniphier-ld20-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-ld20-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-ld20-peri-reset";
#reset-cells = <1>;
};
@@ -570,7 +583,7 @@
emmc: mmc@5a000000 {
compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
reg = <0x5a000000 0x400>;
- interrupts = <0 78 4>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
clocks = <&sys_clk 4>;
@@ -590,7 +603,7 @@
compatible = "socionext,uniphier-sd-v3.1.1";
status = "disabled";
reg = <0x5a400000 0x800>;
- interrupts = <0 76 4>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd>;
clocks = <&sd_clk 0>;
@@ -598,9 +611,10 @@
resets = <&sd_rst 0>;
bus-width = <4>;
cap-sd-highspeed;
+ socionext,syscon-uhs-mode = <&sdctrl 0>;
};
- soc_glue: soc-glue@5f800000 {
+ soc_glue: syscon@5f800000 {
compatible = "socionext,uniphier-ld20-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -610,9 +624,10 @@
};
};
- soc-glue@5f900000 {
+ syscon@5f900000 {
compatible = "socionext,uniphier-ld20-soc-glue-debug",
- "simple-mfd";
+ "simple-mfd", "syscon";
+ reg = <0x5f900000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5f900000 0x2000>;
@@ -675,7 +690,7 @@
xdmac: dma-controller@5fc10000 {
compatible = "socionext,uniphier-xdmac";
reg = <0x5fc10000 0x5300>;
- interrupts = <0 188 4>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <2>;
};
@@ -693,20 +708,20 @@
<0x5fe80000 0x80000>; /* GICR */
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <1 9 4>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
- sysctrl@61840000 {
+ syscon@61840000 {
compatible = "socionext,uniphier-ld20-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-ld20-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-ld20-reset";
#reset-cells = <1>;
};
@@ -715,9 +730,9 @@
compatible = "socionext,uniphier-wdt";
};
- pvtctl: pvtctl {
+ pvtctl: thermal-sensor {
compatible = "socionext,uniphier-ld20-thermal";
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
socionext,tmod-calibration = <0x0f22 0x68ee>;
};
@@ -727,7 +742,7 @@
compatible = "socionext,uniphier-ld20-ave4";
status = "disabled";
reg = <0x65000000 0x8500>;
- interrupts = <0 66 4>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether_rgmii>;
clock-names = "ether";
@@ -749,7 +764,7 @@
status = "disabled";
reg = <0x65a00000 0xcd00>;
interrupt-names = "host";
- interrupts = <0 134 4>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
<&pinctrl_usb2>, <&pinctrl_usb3>;
@@ -762,14 +777,15 @@
dr_mode = "host";
};
- usb-glue@65b00000 {
+ usb-controller@65b00000 {
compatible = "socionext,uniphier-ld20-dwc3-glue",
"simple-mfd";
+ reg = <0x65b00000 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
- usb_rst: reset@0 {
+ usb_rst: reset-controller@0 {
compatible = "socionext,uniphier-ld20-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -815,7 +831,7 @@
resets = <&sys_rst 14>;
};
- usb_hsphy0: hs-phy@200 {
+ usb_hsphy0: phy@200 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
@@ -829,7 +845,7 @@
<&usb_hs_i0>;
};
- usb_hsphy1: hs-phy@210 {
+ usb_hsphy1: phy@210 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
@@ -843,7 +859,7 @@
<&usb_hs_i0>;
};
- usb_hsphy2: hs-phy@220 {
+ usb_hsphy2: phy@220 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x220 0x10>;
#phy-cells = <0>;
@@ -857,7 +873,7 @@
<&usb_hs_i2>;
};
- usb_hsphy3: hs-phy@230 {
+ usb_hsphy3: phy@230 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x230 0x10>;
#phy-cells = <0>;
@@ -871,7 +887,7 @@
<&usb_hs_i2>;
};
- usb_ssphy0: ss-phy@300 {
+ usb_ssphy0: phy@300 {
compatible = "socionext,uniphier-ld20-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
@@ -882,7 +898,7 @@
vbus-supply = <&usb_vbus0>;
};
- usb_ssphy1: ss-phy@310 {
+ usb_ssphy1: phy@310 {
compatible = "socionext,uniphier-ld20-usb3-ssphy";
reg = <0x310 0x10>;
#phy-cells = <0>;
@@ -895,7 +911,7 @@
};
pcie: pcie@66000000 {
- compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
+ compatible = "socionext,uniphier-pcie";
status = "disabled";
reg-names = "dbi", "link", "config";
reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
@@ -915,7 +931,8 @@
<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
#interrupt-cells = <1>;
interrupt-names = "dma", "msi";
- interrupts = <0 224 4>, <0 225 4>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */
<0 0 0 2 &pcie_intc 1>, /* INTB */
@@ -928,7 +945,7 @@
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
- interrupts = <0 226 4>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -948,7 +965,9 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
- interrupts = <0 65 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";