ARM: dts: uniphier: Sync DT with Linux v6.2
Synchronize devicetree sources with Linux v6.2.
- Use GIC interrupt definitions
- Add reg properties in USB-glue and SoC-glue node
- Fix node names to follow the generic names list in DT specification
- Add L2 cache and AHCI nodes
- Update nand and pcie nodes
- And some trivial fixes
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Marek Vasut <marex@denx.de>
diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi
index 0364bdc..e3a4b6a 100644
--- a/arch/arm/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/dts/uniphier-pxs2.dtsi
@@ -6,6 +6,7 @@
// Author: Masahiro Yamada <yamada.masahiro@socionext.com>
#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -161,7 +162,10 @@
compatible = "socionext,uniphier-system-cache";
reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
<0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-size = <(1280 * 1024)>;
cache-sets = <512>;
@@ -175,7 +179,7 @@
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 39 4>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
clocks = <&peri_clk 11>;
@@ -188,7 +192,7 @@
reg = <0x54006100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 216 4>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 12>;
@@ -199,7 +203,7 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
- interrupts = <0 33 4>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
@@ -210,7 +214,7 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
- interrupts = <0 35 4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
@@ -221,7 +225,7 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
- interrupts = <0 37 4>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
@@ -232,7 +236,7 @@
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
- interrupts = <0 177 4>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
@@ -259,7 +263,7 @@
audio@56000000 {
compatible = "socionext,uniphier-pxs2-aio";
reg = <0x56000000 0x80000>;
- interrupts = <0 144 4>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ain1>,
<&pinctrl_ain2>,
@@ -317,7 +321,7 @@
reg = <0x58780000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 41 4>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
@@ -331,7 +335,7 @@
reg = <0x58781000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 42 4>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
@@ -345,7 +349,7 @@
reg = <0x58782000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 43 4>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
@@ -359,7 +363,7 @@
reg = <0x58783000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 44 4>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
@@ -373,7 +377,7 @@
reg = <0x58784000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 45 4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&peri_clk 8>;
resets = <&peri_rst 8>;
clock-frequency = <400000>;
@@ -385,7 +389,7 @@
reg = <0x58785000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 25 4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&peri_clk 9>;
resets = <&peri_rst 9>;
clock-frequency = <400000>;
@@ -397,7 +401,7 @@
reg = <0x58786000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 26 4>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&peri_clk 10>;
resets = <&peri_rst 10>;
clock-frequency = <400000>;
@@ -418,33 +422,33 @@
reg = <0x59801000 0x400>;
};
- sdctrl@59810000 {
+ sdctrl: syscon@59810000 {
compatible = "socionext,uniphier-pxs2-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x400>;
- sd_clk: clock {
+ sd_clk: clock-controller {
compatible = "socionext,uniphier-pxs2-sd-clock";
#clock-cells = <1>;
};
- sd_rst: reset {
+ sd_rst: reset-controller {
compatible = "socionext,uniphier-pxs2-sd-reset";
#reset-cells = <1>;
};
};
- perictrl@59820000 {
+ syscon@59820000 {
compatible = "socionext,uniphier-pxs2-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- peri_clk: clock {
+ peri_clk: clock-controller {
compatible = "socionext,uniphier-pxs2-peri-clock";
#clock-cells = <1>;
};
- peri_rst: reset {
+ peri_rst: reset-controller {
compatible = "socionext,uniphier-pxs2-peri-reset";
#reset-cells = <1>;
};
@@ -454,7 +458,7 @@
compatible = "socionext,uniphier-sd-v3.1.1";
status = "disabled";
reg = <0x5a000000 0x800>;
- interrupts = <0 78 4>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
clocks = <&sd_clk 1>;
@@ -470,7 +474,7 @@
compatible = "socionext,uniphier-sd-v3.1.1";
status = "disabled";
reg = <0x5a400000 0x800>;
- interrupts = <0 76 4>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default", "uhs";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -482,9 +486,10 @@
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
+ socionext,syscon-uhs-mode = <&sdctrl 0>;
};
- soc_glue: soc-glue@5f800000 {
+ soc_glue: syscon@5f800000 {
compatible = "socionext,uniphier-pxs2-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
@@ -494,9 +499,10 @@
};
};
- soc-glue@5f900000 {
+ syscon@5f900000 {
compatible = "socionext,uniphier-pxs2-soc-glue-debug",
- "simple-mfd";
+ "simple-mfd", "syscon";
+ reg = <0x5f900000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5f900000 0x2000>;
@@ -515,7 +521,7 @@
xdmac: dma-controller@5fc10000 {
compatible = "socionext,uniphier-xdmac";
reg = <0x5fc10000 0x5300>;
- interrupts = <0 188 4>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <2>;
};
@@ -530,14 +536,16 @@
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
- interrupts = <1 11 0xf04>;
+ interrupts = <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&arm_timer_clk>;
};
timer@60000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x60000600 0x20>;
- interrupts = <1 13 0xf04>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&arm_timer_clk>;
};
@@ -549,24 +557,24 @@
interrupt-controller;
};
- sysctrl@61840000 {
+ syscon@61840000 {
compatible = "socionext,uniphier-pxs2-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
- sys_clk: clock {
+ sys_clk: clock-controller {
compatible = "socionext,uniphier-pxs2-clock";
#clock-cells = <1>;
};
- sys_rst: reset {
+ sys_rst: reset-controller {
compatible = "socionext,uniphier-pxs2-reset";
#reset-cells = <1>;
};
- pvtctl: pvtctl {
+ pvtctl: thermal-sensor {
compatible = "socionext,uniphier-pxs2-thermal";
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
socionext,tmod-calibration = <0x0f86 0x6844>;
};
@@ -576,7 +584,7 @@
compatible = "socionext,uniphier-pxs2-ave4";
status = "disabled";
reg = <0x65000000 0x8500>;
- interrupts = <0 66 4>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether_rgmii>;
clock-names = "ether";
@@ -593,12 +601,53 @@
};
};
+ ahci: sata@65600000 {
+ compatible = "socionext,uniphier-pxs2-ahci",
+ "generic-ahci";
+ status = "disabled";
+ reg = <0x65600000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_clk 28>;
+ resets = <&sys_rst 28>, <&ahci_rst 0>;
+ ports-implemented = <1>;
+ phys = <&ahci_phy>;
+ };
+
+ sata-controller@65700000 {
+ compatible = "socionext,uniphier-pxs2-ahci-glue",
+ "simple-mfd";
+ reg = <0x65700000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65700000 0x100>;
+
+ ahci_rst: reset-controller@0 {
+ compatible = "socionext,uniphier-pxs2-ahci-reset";
+ reg = <0x0 0x4>;
+ clock-names = "link";
+ clocks = <&sys_clk 28>;
+ reset-names = "link";
+ resets = <&sys_rst 28>;
+ #reset-cells = <1>;
+ };
+
+ ahci_phy: phy@10 {
+ compatible = "socionext,uniphier-pxs2-ahci-phy";
+ reg = <0x10 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 28>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 28>, <&sys_rst 30>;
+ #phy-cells = <0>;
+ };
+ };
+
usb0: usb@65a00000 {
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
status = "disabled";
reg = <0x65a00000 0xcd00>;
- interrupt-names = "host", "peripheral";
- interrupts = <0 134 4>, <0 135 4>;
+ interrupt-names = "dwc_usb3";
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
clock-names = "ref", "bus_early", "suspend";
@@ -609,14 +658,15 @@
dr_mode = "host";
};
- usb-glue@65b00000 {
+ usb-controller@65b00000 {
compatible = "socionext,uniphier-pxs2-dwc3-glue",
"simple-mfd";
+ reg = <0x65b00000 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65b00000 0x400>;
- usb0_rst: reset@0 {
+ usb0_rst: reset-controller@0 {
compatible = "socionext,uniphier-pxs2-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -644,7 +694,7 @@
resets = <&sys_rst 14>;
};
- usb0_hsphy0: hs-phy@200 {
+ usb0_hsphy0: phy@200 {
compatible = "socionext,uniphier-pxs2-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
@@ -655,7 +705,7 @@
vbus-supply = <&usb0_vbus0>;
};
- usb0_hsphy1: hs-phy@210 {
+ usb0_hsphy1: phy@210 {
compatible = "socionext,uniphier-pxs2-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
@@ -666,7 +716,7 @@
vbus-supply = <&usb0_vbus1>;
};
- usb0_ssphy0: ss-phy@300 {
+ usb0_ssphy0: phy@300 {
compatible = "socionext,uniphier-pxs2-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
@@ -677,7 +727,7 @@
vbus-supply = <&usb0_vbus0>;
};
- usb0_ssphy1: ss-phy@310 {
+ usb0_ssphy1: phy@310 {
compatible = "socionext,uniphier-pxs2-usb3-ssphy";
reg = <0x310 0x10>;
#phy-cells = <0>;
@@ -693,8 +743,8 @@
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
status = "disabled";
reg = <0x65c00000 0xcd00>;
- interrupt-names = "host", "peripheral";
- interrupts = <0 137 4>, <0 138 4>;
+ interrupt-names = "dwc_usb3";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
clock-names = "ref", "bus_early", "suspend";
@@ -704,14 +754,15 @@
dr_mode = "host";
};
- usb-glue@65d00000 {
+ usb-controller@65d00000 {
compatible = "socionext,uniphier-pxs2-dwc3-glue",
"simple-mfd";
+ reg = <0x65d00000 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x65d00000 0x400>;
- usb1_rst: reset@0 {
+ usb1_rst: reset-controller@0 {
compatible = "socionext,uniphier-pxs2-usb3-reset";
reg = <0x0 0x4>;
#reset-cells = <1>;
@@ -739,7 +790,7 @@
resets = <&sys_rst 15>;
};
- usb1_hsphy0: hs-phy@200 {
+ usb1_hsphy0: phy@200 {
compatible = "socionext,uniphier-pxs2-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
@@ -750,7 +801,7 @@
vbus-supply = <&usb1_vbus0>;
};
- usb1_hsphy1: hs-phy@210 {
+ usb1_hsphy1: phy@210 {
compatible = "socionext,uniphier-pxs2-usb3-hsphy";
reg = <0x210 0x10>;
#phy-cells = <0>;
@@ -761,7 +812,7 @@
vbus-supply = <&usb1_vbus1>;
};
- usb1_ssphy0: ss-phy@300 {
+ usb1_ssphy0: phy@300 {
compatible = "socionext,uniphier-pxs2-usb3-ssphy";
reg = <0x300 0x10>;
#phy-cells = <0>;
@@ -778,7 +829,9 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
- interrupts = <0 65 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clock-names = "nand", "nand_x", "ecc";