| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * TLMM driver for Qualcomm APQ8016, APQ8096 |
| * |
| * (C) Copyright 2018 Ramon Fried <ramon.fried@gmail.com> |
| * |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <asm/io.h> |
| #include <dm/device_compat.h> |
| #include <dm/device-internal.h> |
| #include <dm/lists.h> |
| #include <asm/gpio.h> |
| #include <dm/pinctrl.h> |
| #include <linux/bitops.h> |
| #include <linux/bug.h> |
| #include <mach/gpio.h> |
| |
| #include "pinctrl-qcom.h" |
| |
| struct msm_pinctrl_priv { |
| phys_addr_t base; |
| struct msm_pinctrl_data *data; |
| }; |
| |
| #define GPIO_CONFIG_REG(priv, x) \ |
| (qcom_pin_offset((priv)->data->pin_data.pin_offsets, x)) |
| |
| #define TLMM_GPIO_PULL_MASK GENMASK(1, 0) |
| #define TLMM_FUNC_SEL_MASK GENMASK(5, 2) |
| #define TLMM_DRV_STRENGTH_MASK GENMASK(8, 6) |
| #define TLMM_GPIO_DISABLE BIT(9) |
| |
| static const struct pinconf_param msm_conf_params[] = { |
| { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 2 }, |
| { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, |
| { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 3 }, |
| }; |
| |
| static int msm_get_functions_count(struct udevice *dev) |
| { |
| struct msm_pinctrl_priv *priv = dev_get_priv(dev); |
| |
| return priv->data->functions_count; |
| } |
| |
| static int msm_get_pins_count(struct udevice *dev) |
| { |
| struct msm_pinctrl_priv *priv = dev_get_priv(dev); |
| |
| return priv->data->pin_data.pin_count; |
| } |
| |
| static const char *msm_get_function_name(struct udevice *dev, |
| unsigned int selector) |
| { |
| struct msm_pinctrl_priv *priv = dev_get_priv(dev); |
| |
| return priv->data->get_function_name(dev, selector); |
| } |
| |
| static int msm_pinctrl_probe(struct udevice *dev) |
| { |
| struct msm_pinctrl_priv *priv = dev_get_priv(dev); |
| |
| priv->base = dev_read_addr(dev); |
| priv->data = (struct msm_pinctrl_data *)dev_get_driver_data(dev); |
| |
| return priv->base == FDT_ADDR_T_NONE ? -EINVAL : 0; |
| } |
| |
| static const char *msm_get_pin_name(struct udevice *dev, unsigned int selector) |
| { |
| struct msm_pinctrl_priv *priv = dev_get_priv(dev); |
| |
| return priv->data->get_pin_name(dev, selector); |
| } |
| |
| static int msm_pinmux_set(struct udevice *dev, unsigned int pin_selector, |
| unsigned int func_selector) |
| { |
| struct msm_pinctrl_priv *priv = dev_get_priv(dev); |
| u32 func = priv->data->get_function_mux(pin_selector, func_selector); |
| |
| /* Always NOP for special pins, assume they're in the correct state */ |
| if (qcom_is_special_pin(&priv->data->pin_data, pin_selector)) |
| return 0; |
| |
| clrsetbits_le32(priv->base + GPIO_CONFIG_REG(priv, pin_selector), |
| TLMM_FUNC_SEL_MASK | TLMM_GPIO_DISABLE, func << 2); |
| return 0; |
| } |
| |
| static int msm_pinconf_set(struct udevice *dev, unsigned int pin_selector, |
| unsigned int param, unsigned int argument) |
| { |
| struct msm_pinctrl_priv *priv = dev_get_priv(dev); |
| |
| /* Always NOP for special pins */ |
| if (qcom_is_special_pin(&priv->data->pin_data, pin_selector)) |
| return 0; |
| |
| switch (param) { |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| argument = (argument / 2) - 1; |
| clrsetbits_le32(priv->base + GPIO_CONFIG_REG(priv, pin_selector), |
| TLMM_DRV_STRENGTH_MASK, argument << 6); |
| break; |
| case PIN_CONFIG_BIAS_DISABLE: |
| clrbits_le32(priv->base + GPIO_CONFIG_REG(priv, pin_selector), |
| TLMM_GPIO_PULL_MASK); |
| break; |
| case PIN_CONFIG_BIAS_PULL_UP: |
| clrsetbits_le32(priv->base + GPIO_CONFIG_REG(priv, pin_selector), |
| TLMM_GPIO_PULL_MASK, argument); |
| break; |
| default: |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| struct pinctrl_ops msm_pinctrl_ops = { |
| .get_pins_count = msm_get_pins_count, |
| .get_pin_name = msm_get_pin_name, |
| .set_state = pinctrl_generic_set_state, |
| .pinmux_set = msm_pinmux_set, |
| .pinconf_num_params = ARRAY_SIZE(msm_conf_params), |
| .pinconf_params = msm_conf_params, |
| .pinconf_set = msm_pinconf_set, |
| .get_functions_count = msm_get_functions_count, |
| .get_function_name = msm_get_function_name, |
| }; |
| |
| int msm_pinctrl_bind(struct udevice *dev) |
| { |
| ofnode node = dev_ofnode(dev); |
| struct msm_pinctrl_data *data = (struct msm_pinctrl_data *)dev_get_driver_data(dev); |
| struct driver *drv; |
| struct udevice *pinctrl_dev; |
| const char *name; |
| int ret; |
| |
| if (!data->pin_data.special_pins_start) |
| dev_warn(dev, "Special pins start index not defined!\n"); |
| |
| drv = lists_driver_lookup_name("pinctrl_qcom"); |
| if (!drv) |
| return -ENOENT; |
| |
| ret = device_bind_with_driver_data(dev_get_parent(dev), drv, ofnode_get_name(node), (ulong)data, |
| dev_ofnode(dev), &pinctrl_dev); |
| if (ret) |
| return ret; |
| |
| ofnode_get_property(node, "gpio-controller", &ret); |
| if (ret < 0) |
| return 0; |
| |
| /* Get the name of gpio node */ |
| name = ofnode_get_name(node); |
| if (!name) |
| return -EINVAL; |
| |
| drv = lists_driver_lookup_name("gpio_msm"); |
| if (!drv) { |
| printf("Can't find gpio_msm driver\n"); |
| return -ENODEV; |
| } |
| |
| /* Bind gpio device as a child of the pinctrl device */ |
| ret = device_bind_with_driver_data(pinctrl_dev, drv, |
| name, (ulong)&data->pin_data, node, NULL); |
| if (ret) { |
| device_unbind(pinctrl_dev); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(pinctrl_qcom) = { |
| .name = "pinctrl_qcom", |
| .id = UCLASS_PINCTRL, |
| .priv_auto = sizeof(struct msm_pinctrl_priv), |
| .ops = &msm_pinctrl_ops, |
| .probe = msm_pinctrl_probe, |
| }; |