powerpc/85xx: Cleanup SGMII detection and reporting
Use new is_serdes_configured to determine if TSECs are in SGMII mode and
report that on the various boards that use or can be configured in SGMII
mode in board_eth_init() instead of in the PCI init code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index cf92ba1..bd80cb7 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -194,7 +194,7 @@
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
struct fsl_pci_info pci_info[4];
- u32 devdisr, pordevsr, io_sel, sdrs2_io_sel;
+ u32 devdisr, pordevsr, io_sel;
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
int first_free_busno = 0;
int num = 0;
@@ -205,18 +205,8 @@
pordevsr = in_be32(&gur->pordevsr);
porpllsr = in_be32(&gur->porpllsr);
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- sdrs2_io_sel = (pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
- debug(" pci_init_board: devdisr=%x, sdrs2_io_sel=%x, io_sel=%x\n",
- devdisr, sdrs2_io_sel, io_sel);
-
- if (sdrs2_io_sel == 7)
- printf("Serdes2 disalbed\n");
- else if (sdrs2_io_sel == 4) {
- printf("eTSEC1 is in sgmii mode.\n");
- printf("eTSEC3 is in sgmii mode.\n");
- } else if (sdrs2_io_sel == 6)
- printf("eTSEC1 is in sgmii mode.\n");
+ debug(" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
puts("\n");
#ifdef CONFIG_PCIE3
@@ -354,14 +344,12 @@
{
#ifdef CONFIG_TSEC_ENET
struct tsec_info_struct tsec_info[2];
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int num = 0;
- uint sdrs2_io_sel =
- (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
- if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) {
+ if (is_serdes_configured(SGMII_TSEC1)) {
+ puts("eTSEC1 is in sgmii mode.\n");
tsec_info[num].phyaddr = 0;
tsec_info[num].flags |= TSEC_SGMII;
}
@@ -369,7 +357,8 @@
#endif
#ifdef CONFIG_TSEC3
SET_STD_TSEC_INFO(tsec_info[num], 3);
- if (sdrs2_io_sel == 4) {
+ if (is_serdes_configured(SGMII_TSEC3)) {
+ puts("eTSEC3 is in sgmii mode.\n");
tsec_info[num].phyaddr = 1;
tsec_info[num].flags |= TSEC_SGMII;
}
@@ -382,8 +371,10 @@
}
#ifdef CONFIG_FSL_SGMII_RISER
- if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6))
+ if (is_serdes_configured(SGMII_TSEC1) ||
+ is_serdes_configured(SGMII_TSEC3)) {
fsl_sgmii_riser_init(tsec_info, num);
+ }
#endif
tsec_eth_init(bis, tsec_info, num);