ARM: dts: sun7i: Sync from Linux v5.18-rc1

Copy the devicetree source for the A20 SoC and all existing boards
verbatim from the Linux v5.18-rc1 tag.

This commit also adds the following new board devicetrees:
 - sun7i-a20-haoyu-marsboard.dts
 - sun7i-a20-linutronix-testbox-v2.dts
 - sun7i-a20-olinuxino-lime-emmc.dts

This update includes changes to the USB PHY detection GPIO properties
which are needed to convert that driver to use the DM GPIO framework.

Signed-off-by: Samuel Holland <samuel@sholland.org>
[Andre: fix Mele M5 U-Boot only DT]
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 83630af..08d38fe 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -582,11 +582,13 @@
 	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
 	sun7i-a20-hummingbird.dtb \
 	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-icnova-swac.dtb \
 	sun7i-a20-itead-ibox.dtb \
 	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-m5.dtb \
 	sun7i-a20-mk808c.dtb \
@@ -594,6 +596,7 @@
 	sun7i-a20-olimex-som204-evb.dtb \
 	sun7i-a20-olimex-som204-evb-emmc.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
 	sun7i-a20-olinuxino-lime2-emmc.dtb \
 	sun7i-a20-olinuxino-micro.dtb \
diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
index 4dbcad1..caa935c 100644
--- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -74,12 +74,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-0 {
 			label = "bananapi-m1-plus:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-1 {
 			label = "bananapi-m1-plus:pwr:usr";
 			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -129,14 +129,10 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -171,6 +167,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
index 33040c4..46ecf9d 100644
--- a/arch/arm/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi.dts
@@ -77,7 +77,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "bananapi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
@@ -104,16 +104,15 @@
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		960000	1400000
-		912000	1400000
-		864000	1350000
-		720000	1250000
-		528000	1150000
-		312000	1100000
-		144000	1050000
-		>;
+		<960000	1400000>,
+		<912000	1400000>,
+		<864000	1350000>,
+		<720000	1250000>,
+		<528000	1150000>,
+		<312000	1100000>,
+		<144000	1050000>;
 };
 
 &de {
@@ -131,14 +130,10 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -171,6 +166,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -246,12 +247,6 @@
 			"SPI-MISO", "SPI-CE1", "",
 		"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
 		"", "", "", "", "", "", "", "";
-
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
 };
 
 #include "axp209.dtsi"
@@ -329,9 +324,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
index 8a75545..e22f0e8 100644
--- a/arch/arm/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/dts/sun7i-a20-bananapro.dts
@@ -63,12 +63,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "bananapro:blue:usr";
 			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "bananapro:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
@@ -109,14 +109,10 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -143,6 +139,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts
index 200685b..e35e699 100644
--- a/arch/arm/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
@@ -75,12 +75,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "cubieboard2:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "cubieboard2:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
@@ -115,13 +115,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -161,6 +157,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -173,14 +175,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_ahci_5v {
 	status = "okay";
 };
@@ -236,9 +230,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
index 46a9f46..52160e3 100644
--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -75,22 +75,22 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "cubietruck:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		orange {
+		led-1 {
 			label = "cubietruck:orange:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		white {
+		led-2 {
 			label = "cubietruck:white:usr";
 			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-3 {
 			label = "cubietruck:green:usr";
 			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -150,13 +150,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -194,6 +190,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts b/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 0000000..097e479
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A20";
+	compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
index fd0153f..3def2a3 100644
--- a/arch/arm/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
@@ -100,19 +100,10 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_vdd>;
-	/* phy reset config */
-	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
-	snps,reset-active-low;
-	/* wait 1s after reset, otherwise fail to read phy id */
-	snps,reset-delays-us = <0 10000 1000000>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -146,6 +137,16 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
index 5f1c4f5..b21ddd0 100644
--- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
@@ -62,12 +62,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-0 {
 			label = "i12_tvbox:red:usr";
 			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
 		};
 
-		blue {
+		led-1 {
 			label = "i12_tvbox:blue:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
@@ -115,14 +115,10 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -145,6 +141,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts
index 9494947..413505f 100644
--- a/arch/arm/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts
@@ -49,7 +49,8 @@
 
 / {
 	model = "ICnova-A20 SWAC";
-	compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
+	compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
 
 	aliases {
 		serial0 = &uart0;
@@ -75,13 +76,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -98,6 +95,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts
index b90a760..8ff8301 100644
--- a/arch/arm/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts
@@ -53,13 +53,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_itead_core>;
 
-		green {
+		led-0 {
 			label = "itead_core:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		blue {
+		led-1 {
 			label = "itead_core:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -97,10 +97,12 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
+};
 
+&gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
index f91e1be..97518af 100644
--- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
@@ -75,7 +75,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "lamobo_r1:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
@@ -123,8 +123,6 @@
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-	/delete-property/#address-cells;
-	/delete-property/#size-cells;
 
 	fixed-link {
 		speed = <1000>;
@@ -229,14 +227,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 #include "axp209.dtsi"
 
 &ac_power_supply {
@@ -322,9 +312,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 0000000..da5a2ee
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts
index b8a1aaa..f161d52 100644
--- a/arch/arm/dts/sun7i-a20-m3.dts
+++ b/arch/arm/dts/sun7i-a20-m3.dts
@@ -64,7 +64,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "m3:blue:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
@@ -82,13 +82,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -111,6 +107,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-m5.dts b/arch/arm/dts/sun7i-a20-m5.dts
index 6de52c7..cfbc50d 100644
--- a/arch/arm/dts/sun7i-a20-m5.dts
+++ b/arch/arm/dts/sun7i-a20-m5.dts
@@ -39,7 +39,9 @@
 	phy = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
+};
 
+&gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
index f0e6a96..f05ee32b 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
@@ -75,7 +75,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "a20-olimex-som-evb:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -111,13 +111,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -202,6 +198,12 @@
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
index 823aabc..54af6c1 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
@@ -46,19 +46,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		stat {
+		led-0 {
 			label = "a20-som204-evb:green:stat";
 			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		led1 {
+		led-1 {
 			label = "a20-som204-evb:green:led1";
 			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		led2 {
+		led-2 {
 			label = "a20-som204-evb:yellow:led2";
 			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -105,18 +105,10 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy3>;
+	phy-handle = <&phy3>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_vcc3v3>;
-
-	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 1000000>;
 	status = "okay";
-
-	phy3: ethernet-phy@3 {
-		reg = <3>;
-	};
 };
 
 &hdmi {
@@ -161,6 +153,16 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -314,8 +316,8 @@
 };
 
 &usbphy {
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 0000000..033cab3
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME-eMMC";
+	compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
index 5e41119..92938d0 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
@@ -78,7 +78,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a20-olinuxino-lime:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -106,13 +106,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -149,6 +145,12 @@
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -174,18 +176,6 @@
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
 };
 
 &reg_ahci_5v {
@@ -217,10 +207,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
index 9962016..ecb91fb 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
@@ -75,7 +75,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a20-olinuxino-lime2:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -111,13 +111,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -154,6 +150,12 @@
 	vref-supply = <&reg_vcc3v0>;
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -174,23 +176,17 @@
 };
 
 &pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_ldo3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_ldo4>;
+
 	led_pins_olinuxinolime: led-pins {
 		pins = "PH2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
 };
 
 &reg_ahci_5v {
@@ -200,6 +196,14 @@
 
 #include "axp209.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -267,10 +271,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
index 840ae11..a1b89b2 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
@@ -82,7 +82,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		green {
+		led {
 			label = "a20-olinuxino-micro:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -118,13 +118,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -215,6 +211,12 @@
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -252,18 +254,6 @@
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
 };
 
 #include "axp209.dtsi"
@@ -355,10 +345,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
index 1588108..84efa01 100644
--- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
@@ -75,12 +75,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-0 {
 			label = "orangepi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 		};
 
-		blue {
+		led-1 {
 			label = "orangepi:blue:usr";
 			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 		};
@@ -120,14 +120,10 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -158,6 +154,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -176,14 +178,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -239,9 +233,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
index d64de2e..5d77f1d 100644
--- a/arch/arm/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
@@ -64,7 +64,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "orangepi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 		};
@@ -96,14 +96,10 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -124,6 +120,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -135,14 +137,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -198,9 +192,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
index 205eaae..e40ecb4 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2015 Adam Sampson <ats@offog.org>
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -72,14 +72,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		/* Marked "LED3" on the PCB. */
-		usr1 {
+		led-3 {
 			label = "pcduino3-nano:green:usr1";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
 		};
 
-		/* Marked "LED4" on the PCB. */
-		usr2 {
+		led-4 {
 			label = "pcduino3-nano:green:usr2";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
 		};
@@ -114,13 +112,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -149,6 +143,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -168,14 +168,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_ahci_5v {
 	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 	status = "okay";
@@ -226,9 +218,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
index a72ed43..4f8d55d 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -64,12 +64,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		tx {
+		led-0 {
 			label = "pcduino3:green:tx";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
 		};
 
-		rx {
+		led-1 {
 			label = "pcduino3:green:rx";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
 		};
@@ -122,13 +122,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -149,6 +145,12 @@
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -168,14 +170,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_ahci_5v {
 	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 	status = "okay";
@@ -226,9 +220,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
index ffade25..fef02fc 100644
--- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
@@ -64,6 +64,7 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
@@ -156,14 +157,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_pin>;
@@ -223,9 +216,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
index c27e560..3bfae98 100644
--- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -81,13 +81,9 @@
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -110,6 +106,12 @@
 
 #include "axp209.dtsi"
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -145,14 +147,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0-id-detect-pin {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -206,9 +200,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
index 641a8fa..5574299 100644
--- a/arch/arm/dts/sun7i-a20.dtsi
+++ b/arch/arm/dts/sun7i-a20.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/clock/sun7i-a20-ccu.h>
 #include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -105,16 +106,15 @@
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				960000	1400000
-				912000	1400000
-				864000	1300000
-				720000	1200000
-				528000	1100000
-				312000	1000000
-				144000	1000000
-				>;
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -124,22 +124,21 @@
 			reg = <1>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				960000	1400000
-				912000	1400000
-				864000	1300000
-				720000	1200000
-				528000	1100000
-				312000	1000000
-				144000	1000000
-				>;
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
 			#cooling-cells = <2>;
 		};
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -180,7 +179,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
@@ -333,7 +332,7 @@
 			#dma-cells = <2>;
 		};
 
-		nfc: nand@1c03000 {
+		nfc: nand-controller@1c03000 {
 			compatible = "allwinner,sun4i-a10-nand";
 			reg = <0x01c03000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -376,6 +375,16 @@
 			num-cs = <1>;
 		};
 
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_CSI0>;
+			status = "disabled";
+		};
+
 		emac: ethernet@1c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
@@ -394,11 +403,12 @@
 		};
 
 		tcon0: lcd-controller@1c0c000 {
-			compatible = "allwinner,sun7i-a20-tcon";
+			compatible = "allwinner,sun7i-a20-tcon0",
+				     "allwinner,sun7i-a20-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_TCON0>;
-			reset-names = "lcd";
+			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB_LCD0>,
 				 <&ccu CLK_TCON0_CH0>,
 				 <&ccu CLK_TCON0_CH1>;
@@ -406,6 +416,7 @@
 				      "tcon-ch0",
 				      "tcon-ch1";
 			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
 			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
 
 			ports {
@@ -443,7 +454,8 @@
 		};
 
 		tcon1: lcd-controller@1c0d000 {
-			compatible = "allwinner,sun7i-a20-tcon";
+			compatible = "allwinner,sun7i-a20-tcon1",
+				     "allwinner,sun7i-a20-tcon";
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&ccu RST_TCON1>;
@@ -455,6 +467,7 @@
 				      "tcon-ch0",
 				      "tcon-ch1";
 			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
 			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
 
 			ports {
@@ -586,13 +599,14 @@
 			phy-names = "usb";
 			extcon = <&usbphy 0>;
 			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
 			status = "disabled";
 		};
 
 		usbphy: phy@1c13400 {
 			#phy-cells = <1>;
 			compatible = "allwinner,sun7i-a20-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
 			reg-names = "phy_ctrl", "pmu1", "pmu2";
 			clocks = <&ccu CLK_USB_PHY>;
 			clock-names = "usb_phy";
@@ -716,6 +730,17 @@
 			status = "disabled";
 		};
 
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun7i-a20-csi1",
+				     "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
 		spi3: spi@1c1f000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c1f000 0x1000>;
@@ -751,21 +776,70 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			/omit-if-no-ref/
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
 			can_ph_pins: can-ph-pins {
 				pins = "PH20", "PH21";
 				function = "can";
 			};
 
+			/omit-if-no-ref/
 			clk_out_a_pin: clk-out-a-pin {
 				pins = "PI12";
 				function = "clk_out_a";
 			};
 
+			/omit-if-no-ref/
 			clk_out_b_pin: clk-out-b-pin {
 				pins = "PI13";
 				function = "clk_out_b";
 			};
 
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_clk_pin: csi-clk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
 			emac_pa_pins: emac-pa-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
@@ -775,6 +849,17 @@
 				function = "emac";
 			};
 
+			/omit-if-no-ref/
+			emac_ph_pins: emac-ph-pins {
+				pins = "PH8", "PH9", "PH10", "PH11",
+				       "PH14", "PH15", "PH16", "PH17",
+				       "PH18", "PH19", "PH20", "PH21",
+				       "PH22", "PH23", "PH24", "PH25",
+				       "PH26";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
 			gmac_mii_pins: gmac-mii-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
@@ -784,6 +869,7 @@
 				function = "gmac";
 			};
 
+			/omit-if-no-ref/
 			gmac_rgmii_pins: gmac-rgmii-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
@@ -798,46 +884,69 @@
 				drive-strength = <40>;
 			};
 
+			/omit-if-no-ref/
 			i2c0_pins: i2c0-pins {
 				pins = "PB0", "PB1";
 				function = "i2c0";
 			};
 
+			/omit-if-no-ref/
 			i2c1_pins: i2c1-pins {
 				pins = "PB18", "PB19";
 				function = "i2c1";
 			};
 
+			/omit-if-no-ref/
 			i2c2_pins: i2c2-pins {
 				pins = "PB20", "PB21";
 				function = "i2c2";
 			};
 
+			/omit-if-no-ref/
 			i2c3_pins: i2c3-pins {
 				pins = "PI0", "PI1";
 				function = "i2c3";
 			};
 
+			/omit-if-no-ref/
 			ir0_rx_pin: ir0-rx-pin {
 				pins = "PB4";
 				function = "ir0";
 			};
 
+			/omit-if-no-ref/
 			ir0_tx_pin: ir0-tx-pin {
 				pins = "PB3";
 				function = "ir0";
 			};
 
+			/omit-if-no-ref/
 			ir1_rx_pin: ir1-rx-pin {
 				pins = "PB23";
 				function = "ir1";
 			};
 
+			/omit-if-no-ref/
 			ir1_tx_pin: ir1-tx-pin {
 				pins = "PB22";
 				function = "ir1";
 			};
 
+			/omit-if-no-ref/
+			lcd_lvds0_pins: lcd-lvds0-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds1_pins: lcd-lvds1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+			};
+
+			/omit-if-no-ref/
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
@@ -846,6 +955,7 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
 			mmc2_pins: mmc2-pins {
 				pins = "PC6", "PC7", "PC8",
 				       "PC9", "PC10", "PC11";
@@ -854,6 +964,7 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
 			mmc3_pins: mmc3-pins {
 				pins = "PI4", "PI5", "PI6",
 				       "PI7", "PI8", "PI9";
@@ -862,127 +973,206 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
 			ps2_0_pins: ps2-0-pins {
 				pins = "PI20", "PI21";
 				function = "ps2";
 			};
 
+			/omit-if-no-ref/
 			ps2_1_ph_pins: ps2-1-ph-pins {
 				pins = "PH12", "PH13";
 				function = "ps2";
 			};
 
+			/omit-if-no-ref/
 			pwm0_pin: pwm0-pin {
 				pins = "PB2";
 				function = "pwm";
 			};
 
+			/omit-if-no-ref/
 			pwm1_pin: pwm1-pin {
 				pins = "PI3";
 				function = "pwm";
 			};
 
+			/omit-if-no-ref/
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PB13";
 				function = "spdif";
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
 			spi0_pi_pins: spi0-pi-pins {
 				pins = "PI11", "PI12", "PI13";
 				function = "spi0";
 			};
 
+			/omit-if-no-ref/
 			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
 				pins = "PI10";
 				function = "spi0";
 			};
 
+			/omit-if-no-ref/
 			spi0_cs1_pi_pin: spi0-cs1-pi-pin {
 				pins = "PI14";
 				function = "spi0";
 			};
 
+			/omit-if-no-ref/
 			spi1_pi_pins: spi1-pi-pins {
 				pins = "PI17", "PI18", "PI19";
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
 				pins = "PI16";
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spi2_pb_pins: spi2-pb-pins {
 				pins = "PB15", "PB16", "PB17";
 				function = "spi2";
 			};
 
+			/omit-if-no-ref/
 			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
 				pins = "PB14";
 				function = "spi2";
 			};
 
+			/omit-if-no-ref/
 			spi2_pc_pins: spi2-pc-pins {
 				pins = "PC20", "PC21", "PC22";
 				function = "spi2";
 			};
 
+			/omit-if-no-ref/
 			spi2_cs0_pc_pin: spi2-cs0-pc-pin {
 				pins = "PC19";
 				function = "spi2";
 			};
 
+			/omit-if-no-ref/
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB22", "PB23";
 				function = "uart0";
 			};
 
+			/omit-if-no-ref/
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart2_pa_pins: uart2-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
 			uart2_pi_pins: uart2-pi-pins {
 				pins = "PI18", "PI19";
 				function = "uart2";
 			};
 
+			/omit-if-no-ref/
 			uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
 				pins = "PI16", "PI17";
 				function = "uart2";
 			};
 
+			/omit-if-no-ref/
 			uart3_pg_pins: uart3-pg-pins {
 				pins = "PG6", "PG7";
 				function = "uart3";
 			};
 
+			/omit-if-no-ref/
 			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
 				pins = "PG8", "PG9";
 				function = "uart3";
 			};
 
+			/omit-if-no-ref/
 			uart3_ph_pins: uart3-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart3";
 			};
 
+			/omit-if-no-ref/
+			uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
+				pins = "PH2", "PH3";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
 			uart4_pg_pins: uart4-pg-pins {
 				pins = "PG10", "PG11";
 				function = "uart4";
 			};
 
+			/omit-if-no-ref/
 			uart4_ph_pins: uart4-ph-pins {
 				pins = "PH4", "PH5";
 				function = "uart4";
 			};
 
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
 			uart5_pi_pins: uart5-pi-pins {
 				pins = "PI10", "PI11";
 				function = "uart5";
 			};
 
+			/omit-if-no-ref/
+			uart6_pa_pins: uart6-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart6";
+			};
+
+			/omit-if-no-ref/
 			uart6_pi_pins: uart6-pi-pins {
 				pins = "PI12", "PI13";
 				function = "uart6";
 			};
 
+			/omit-if-no-ref/
+			uart7_pa_pins: uart7-pa-pins {
+				pins = "PA14", "PA15";
+				function = "uart7";
+			};
+
+			/omit-if-no-ref/
 			uart7_pi_pins: uart7-pi-pins {
 				pins = "PI20", "PI21";
 				function = "uart7";
@@ -1004,6 +1194,8 @@
 		wdt: watchdog@1c20c90 {
 			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		rtc: rtc@1c20d00 {
@@ -1326,8 +1518,12 @@
 			snps,fixed-burst;
 			snps,force_sf_dma_mode;
 			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		hstimer@1c60000 {
@@ -1341,7 +1537,7 @@
 		};
 
 		gic: interrupt-controller@1c81000 {
-			compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
 			      <0x01c82000 0x2000>,
 			      <0x01c84000 0x2000>,