rockchip: rk356x: Update PCIe config, IO and memory regions

Update config, IO and memory regions used based on [1] with pcie3x2
config reg address and reg size corrected.

Before this change:

  PCI Autoconfig: Bus Memory region: [0-3eefffff],
  PCI Autoconfig: Bus I/O region: [3ef00000-3effffff],

After this change:

  PCI Autoconfig: Bus Memory region: [40000000-7fffffff],
  PCI Autoconfig: Bus I/O region: [f0100000-f01fffff],

[1] https://lore.kernel.org/lkml/20221112114125.1637543-2-aholmes@omnom.net/

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3568.dtsi b/arch/arm/dts/rk3568.dtsi
index ba67b58..f1be76a 100644
--- a/arch/arm/dts/rk3568.dtsi
+++ b/arch/arm/dts/rk3568.dtsi
@@ -94,9 +94,10 @@
 		power-domains = <&power RK3568_PD_PIPE>;
 		reg = <0x3 0xc0400000 0x0 0x00400000>,
 		      <0x0 0xfe270000 0x0 0x00010000>,
-		      <0x3 0x7f000000 0x0 0x01000000>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>,
-			 <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>;
+		      <0x0 0xf2000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X1_POWERUP>;
 		reset-names = "pipe";
@@ -146,9 +147,10 @@
 		power-domains = <&power RK3568_PD_PIPE>;
 		reg = <0x3 0xc0800000 0x0 0x00400000>,
 		      <0x0 0xfe280000 0x0 0x00010000>,
-		      <0x3 0xbf000000 0x0 0x01000000>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>,
-			 <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>;
+		      <0x0 0xf0000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X2_POWERUP>;
 		reset-names = "pipe";
diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi
index 6492ace..e0591c1 100644
--- a/arch/arm/dts/rk356x.dtsi
+++ b/arch/arm/dts/rk356x.dtsi
@@ -951,7 +951,7 @@
 		compatible = "rockchip,rk3568-pcie";
 		reg = <0x3 0xc0000000 0x0 0x00400000>,
 		      <0x0 0xfe260000 0x0 0x00010000>,
-		      <0x3 0x3f000000 0x0 0x01000000>;
+		      <0x0 0xf4000000 0x0 0x00100000>;
 		reg-names = "dbi", "apb", "config";
 		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -980,8 +980,9 @@
 		phys = <&combphy2 PHY_TYPE_PCIE>;
 		phy-names = "pcie-phy";
 		power-domains = <&power RK3568_PD_PIPE>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000
-			  0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>;
+		ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>;
 		resets = <&cru SRST_PCIE20_POWERUP>;
 		reset-names = "pipe";
 		#address-cells = <3>;