rockchip: rk356x: Update PCIe config, IO and memory regions

Update config, IO and memory regions used based on [1] with pcie3x2
config reg address and reg size corrected.

Before this change:

  PCI Autoconfig: Bus Memory region: [0-3eefffff],
  PCI Autoconfig: Bus I/O region: [3ef00000-3effffff],

After this change:

  PCI Autoconfig: Bus Memory region: [40000000-7fffffff],
  PCI Autoconfig: Bus I/O region: [f0100000-f01fffff],

[1] https://lore.kernel.org/lkml/20221112114125.1637543-2-aholmes@omnom.net/

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3568.dtsi b/arch/arm/dts/rk3568.dtsi
index ba67b58..f1be76a 100644
--- a/arch/arm/dts/rk3568.dtsi
+++ b/arch/arm/dts/rk3568.dtsi
@@ -94,9 +94,10 @@
 		power-domains = <&power RK3568_PD_PIPE>;
 		reg = <0x3 0xc0400000 0x0 0x00400000>,
 		      <0x0 0xfe270000 0x0 0x00010000>,
-		      <0x3 0x7f000000 0x0 0x01000000>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>,
-			 <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>;
+		      <0x0 0xf2000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X1_POWERUP>;
 		reset-names = "pipe";
@@ -146,9 +147,10 @@
 		power-domains = <&power RK3568_PD_PIPE>;
 		reg = <0x3 0xc0800000 0x0 0x00400000>,
 		      <0x0 0xfe280000 0x0 0x00010000>,
-		      <0x3 0xbf000000 0x0 0x01000000>;
-		ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>,
-			 <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>;
+		      <0x0 0xf0000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X2_POWERUP>;
 		reset-names = "pipe";