Blackfin: bct-brettl2: new board port
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/board/bct-brettl2/smsc9303.c b/board/bct-brettl2/smsc9303.c
new file mode 100644
index 0000000..15eea7a
--- /dev/null
+++ b/board/bct-brettl2/smsc9303.c
@@ -0,0 +1,176 @@
+/*
+ * smsc9303.c - routines to initialize SMSC 9303 switch
+ *
+ * Copyright (c) 2010 BCT Electronic GmbH
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <miiphy.h>
+
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+
+static int smc9303i_write_mii(unsigned char addr, unsigned char reg, unsigned short data)
+{
+ const char *devname = miiphy_get_current_dev();
+
+ if (!devname)
+ return 0;
+
+ if (miiphy_write(devname, addr, reg, data) != 0)
+ return 0;
+
+ return 1;
+}
+
+static int smc9303i_write_reg(unsigned short reg, unsigned int data)
+{
+ const char *devname = miiphy_get_current_dev();
+ unsigned char mii_addr = 0x10 | (reg >> 6);
+ unsigned char mii_reg = (reg & 0x3c) >> 1;
+
+ if (!devname)
+ return 0;
+
+ if (miiphy_write(devname, mii_addr, mii_reg|0, data & 0xffff) != 0)
+ return 0;
+
+ if (miiphy_write(devname, mii_addr, mii_reg|1, data >> 16) != 0)
+ return 0;
+
+ return 1;
+}
+
+static int smc9303i_read_reg(unsigned short reg, unsigned int *data)
+{
+ const char *devname = miiphy_get_current_dev();
+ unsigned char mii_addr = 0x10 | (reg >> 6);
+ unsigned char mii_reg = (reg & 0x3c) >> 1;
+ unsigned short tmp1, tmp2;
+
+ if (!devname)
+ return 0;
+
+ if (miiphy_read(devname, mii_addr, mii_reg|0, &tmp1) != 0)
+ return 0;
+
+ if (miiphy_read(devname, mii_addr, mii_reg|1, &tmp2) != 0)
+ return 0;
+
+ *data = (tmp2 << 16) | tmp1;
+
+ return 1;
+}
+
+#if 0
+static int smc9303i_read_mii(unsigned char addr, unsigned char reg, unsigned short *data)
+{
+ const char *devname = miiphy_get_current_dev();
+
+ if (!devname)
+ return 0;
+
+ if (miiphy_read(devname, addr, reg, data) != 0)
+ return 0;
+
+ return 1;
+}
+#endif
+
+typedef struct {
+ unsigned short reg;
+ unsigned int value;
+} smsc9303i_config_entry1_t;
+
+static const smsc9303i_config_entry1_t smsc9303i_config_table1[] =
+{
+ {0x1a0, 0x00000006}, /* Port 1 Manual Flow Control Register */
+ {0x1a4, 0x00000006}, /* Port 2 Manual Flow Control Register */
+ {0x1a8, 0x00000006}, /* Port 0 Manual Flow Control Register */
+};
+
+typedef struct
+{
+ unsigned char addr;
+ unsigned char reg;
+ unsigned short value;
+} smsc9303i_config_entry2_t;
+
+static const smsc9303i_config_entry2_t smsc9303i_config_table2[] =
+{
+ {0x01, 0x00, 0x0100}, /* Port0 PHY Basic Control Register */
+ {0x02, 0x00, 0x1100}, /* Port1 PHY Basic Control Register */
+ {0x03, 0x00, 0x1100}, /* Port2 PHY Basic Control Register */
+
+ {0x01, 0x04, 0x0001}, /* Port0 PHY Auto-Negotiation Advertisement Register */
+ {0x02, 0x04, 0x2de1}, /* Port1 PHY Auto-Negotiation Advertisement Register */
+ {0x03, 0x04, 0x2de1}, /* Port2 PHY Auto-Negotiation Advertisement Register */
+
+ {0x01, 0x11, 0x0000}, /* Port0 PHY Mode Control/Status Register */
+ {0x02, 0x11, 0x0000}, /* Port1 PHY Mode Control/Status Register */
+ {0x03, 0x11, 0x0000}, /* Port2 PHY Mode Control/Status Register */
+
+ {0x01, 0x12, 0x0021}, /* Port0 PHY Special Modes Register */
+ {0x02, 0x12, 0x00e2}, /* Port1 PHY Special Modes Register */
+ {0x03, 0x12, 0x00e3}, /* Port2 PHY Special Modes Register */
+ {0x01, 0x1b, 0x0000}, /* Port0 PHY Special Control/Status Indication Register */
+ {0x02, 0x1b, 0x0000}, /* Port1 PHY Special Control/Status Indication Register */
+ {0x03, 0x1b, 0x0000}, /* Port2 PHY Special Control/Status Indication Register */
+ {0x01, 0x1e, 0x0000}, /* Port0 PHY Interrupt Source Flags Register */
+ {0x02, 0x1e, 0x0000}, /* Port1 PHY Interrupt Source Flags Register */
+ {0x03, 0x1e, 0x0000}, /* Port2 PHY Interrupt Source Flags Register */
+};
+
+int init_smsc9303i_mii(void)
+{
+ unsigned int data;
+ unsigned int i;
+
+ printf(" reset SMSC LAN9303i\n");
+
+ gpio_request(GPIO_PG10, "smsc9303");
+ gpio_direction_output(GPIO_PG10, 0);
+ udelay(10000);
+ gpio_direction_output(GPIO_PG10, 1);
+ udelay(10000);
+
+ gpio_free(GPIO_PG10);
+
+#if defined(CONFIG_MII_INIT)
+ mii_init();
+#endif
+
+ printf(" write SMSC LAN9303i configuration\n");
+
+ if (!smc9303i_read_reg(0x50, &data))
+ return 0;
+
+ if ((data >> 16) != 0x9303) {
+ /* chip id not found */
+ printf(" error identifying SMSC LAN9303i\n");
+ return 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(smsc9303i_config_table1); i++) {
+ const smsc9303i_config_entry1_t *entry = &smsc9303i_config_table1[i];
+
+ if (!smc9303i_write_reg(entry->reg, entry->value)) {
+ printf(" error writing SMSC LAN9303i configuration\n");
+ return 0;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(smsc9303i_config_table2); i++) {
+ const smsc9303i_config_entry2_t *entry = &smsc9303i_config_table2[i];
+
+ if (!smc9303i_write_mii(entry->addr, entry->reg, entry->value)) {
+ printf(" error writing SMSC LAN9303i configuration\n");
+ return 0;
+ }
+ }
+
+ return 1;
+}