drivers/net/phy/dp83867.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * TI PHY drivers
  *
  */
 #include <common.h>
 #include <log.h>
 #include <phy.h>
 #include <dm/devres.h>
 #include <linux/bitops.h>
 #include <linux/compat.h>
 #include <malloc.h>

 #include <dm.h>
 #include <dt-bindings/net/ti-dp83867.h>

 #include "ti_phy_init.h"

 /* TI DP83867 */
 #define DP83867_DEVADDR		0x1f

 #define MII_DP83867_PHYCTRL	0x10
 #define MII_DP83867_MICR	0x12
 #define MII_DP83867_CFG2	0x14
 #define MII_DP83867_BISCR	0x16
 #define DP83867_CTRL		0x1f

 /* Extended Registers */
 #define DP83867_CFG4		0x0031
 #define DP83867_RGMIICTL	0x0032
 #define DP83867_STRAP_STS1	0x006E
 #define DP83867_STRAP_STS2	0x006f
 #define DP83867_RGMIIDCTL	0x0086
 #define DP83867_IO_MUX_CFG	0x0170
 #define DP83867_SGMIICTL	0x00D3

 #define DP83867_SW_RESET	BIT(15)
 #define DP83867_SW_RESTART	BIT(14)

 /* MICR Interrupt bits */
 #define MII_DP83867_MICR_AN_ERR_INT_EN		BIT(15)
 #define MII_DP83867_MICR_SPEED_CHNG_INT_EN	BIT(14)
 #define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN	BIT(13)
 #define MII_DP83867_MICR_PAGE_RXD_INT_EN	BIT(12)
 #define MII_DP83867_MICR_AUTONEG_COMP_INT_EN	BIT(11)
 #define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN	BIT(10)
 #define MII_DP83867_MICR_FALSE_CARRIER_INT_EN	BIT(8)
 #define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN	BIT(4)
 #define MII_DP83867_MICR_WOL_INT_EN		BIT(3)
 #define MII_DP83867_MICR_XGMII_ERR_INT_EN	BIT(2)
 #define MII_DP83867_MICR_POL_CHNG_INT_EN	BIT(1)
 #define MII_DP83867_MICR_JABBER_INT_EN		BIT(0)

 /* RGMIICTL bits */
 #define DP83867_RGMII_TX_CLK_DELAY_EN		BIT(1)
 #define DP83867_RGMII_RX_CLK_DELAY_EN		BIT(0)

 /* STRAP_STS1 bits */
 #define DP83867_STRAP_STS1_RESERVED		BIT(11)

 /* STRAP_STS2 bits */
 #define DP83867_STRAP_STS2_CLK_SKEW_TX_MASK	GENMASK(6, 4)
 #define DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT	4
 #define DP83867_STRAP_STS2_CLK_SKEW_RX_MASK	GENMASK(2, 0)
 #define DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT	0
 #define DP83867_STRAP_STS2_CLK_SKEW_NONE	BIT(2)

 /* PHY CTRL bits */
 #define DP83867_PHYCR_FIFO_DEPTH_SHIFT		14
 #define DP83867_PHYCR_FIFO_DEPTH_MASK		GENMASK(15, 14)
 #define DP83867_PHYCR_RESERVED_MASK	BIT(11)
 #define DP83867_PHYCR_FORCE_LINK_GOOD	BIT(10)
 #define DP83867_MDI_CROSSOVER		5
 #define DP83867_MDI_CROSSOVER_MDIX	2
 #define DP83867_PHYCTRL_SGMIIEN			0x0800
 #define DP83867_PHYCTRL_RXFIFO_SHIFT	12
 #define DP83867_PHYCTRL_TXFIFO_SHIFT	14

 /* RGMIIDCTL bits */
 #define DP83867_RGMII_TX_CLK_DELAY_MAX		0xf
 #define DP83867_RGMII_TX_CLK_DELAY_SHIFT	4
 #define DP83867_RGMII_RX_CLK_DELAY_MAX		0xf

 /* CFG2 bits */
 #define MII_DP83867_CFG2_SPEEDOPT_10EN		0x0040
 #define MII_DP83867_CFG2_SGMII_AUTONEGEN	0x0080
 #define MII_DP83867_CFG2_SPEEDOPT_ENH		0x0100
 #define MII_DP83867_CFG2_SPEEDOPT_CNT		0x0800
 #define MII_DP83867_CFG2_SPEEDOPT_INTLOW	0x2000
 #define MII_DP83867_CFG2_MASK			0x003F

 /* User setting - can be taken from DTS */
 #define DEFAULT_FIFO_DEPTH	DP83867_PHYCR_FIFO_DEPTH_4_B_NIB

 /* IO_MUX_CFG bits */
 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL	0x1f

 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX	0x0
 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN	0x1f
 #define DP83867_IO_MUX_CFG_CLK_O_DISABLE	BIT(6)
 #define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT	8
 #define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK	\
 		GENMASK(0x1f, DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT)

 /* CFG4 bits */
 #define DP83867_CFG4_PORT_MIRROR_EN		BIT(0)

 /* SGMIICTL bits */
 #define DP83867_SGMII_TYPE			BIT(14)

 enum {
 	DP83867_PORT_MIRRORING_KEEP,
 	DP83867_PORT_MIRRORING_EN,
 	DP83867_PORT_MIRRORING_DIS,
 };

 struct dp83867_private {
 	u32 rx_id_delay;
 	u32 tx_id_delay;
 	int fifo_depth;
 	int io_impedance;
 	bool rxctrl_strap_quirk;
 	int port_mirroring;
 	bool set_clk_output;
 	unsigned int clk_output_sel;
 	bool sgmii_ref_clk_en;
 };

 static int dp83867_config_port_mirroring(struct phy_device *phydev)
 {
 	struct dp83867_private *dp83867 =
 		(struct dp83867_private *)phydev->priv;
 	u16 val;

 	val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);

 	if (dp83867->port_mirroring == DP83867_PORT_MIRRORING_EN)
 		val |= DP83867_CFG4_PORT_MIRROR_EN;
 	else
 		val &= ~DP83867_CFG4_PORT_MIRROR_EN;

 	phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);

 	return 0;
 }

 /**
  * dp83867_data_init - Convenience function for setting PHY specific data
  *
  * @phydev: the phy_device struct
  */
 static int dp83867_of_init(struct phy_device *phydev)
 {
 	struct dp83867_private *dp83867 = phydev->priv;
 	ofnode node;
 	int ret;

 	node = phy_get_ofnode(phydev);
 	if (!ofnode_valid(node))
 		return 0;

 	/* Optional configuration */
 	ret = ofnode_read_u32(node, "ti,clk-output-sel",
 			      &dp83867->clk_output_sel);
 	/* If not set, keep default */
 	if (!ret) {
 		dp83867->set_clk_output = true;
 		/* Valid values are 0 to DP83867_CLK_O_SEL_REF_CLK or
 		 * DP83867_CLK_O_SEL_OFF.
 		 */
 		if (dp83867->clk_output_sel > DP83867_CLK_O_SEL_REF_CLK &&
 		    dp83867->clk_output_sel != DP83867_CLK_O_SEL_OFF) {
 			pr_debug("ti,clk-output-sel value %u out of range\n",
 				 dp83867->clk_output_sel);
 			return -EINVAL;
 		}
 	}

 	if (ofnode_read_bool(node, "ti,max-output-impedance"))
 		dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
 	else if (ofnode_read_bool(node, "ti,min-output-impedance"))
 		dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN;
 	else
 		dp83867->io_impedance = -EINVAL;

 	if (ofnode_read_bool(node, "ti,dp83867-rxctrl-strap-quirk"))
 		dp83867->rxctrl_strap_quirk = true;

 	/* Existing behavior was to use default pin strapping delay in rgmii
 	 * mode, but rgmii should have meant no delay.  Warn existing users.
 	 */
 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
 		u16 val = phy_read_mmd(phydev, DP83867_DEVADDR,
 				       DP83867_STRAP_STS2);
 		u16 txskew = (val & DP83867_STRAP_STS2_CLK_SKEW_TX_MASK) >>
 			     DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT;
 		u16 rxskew = (val & DP83867_STRAP_STS2_CLK_SKEW_RX_MASK) >>
 			     DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT;

 		if (txskew != DP83867_STRAP_STS2_CLK_SKEW_NONE ||
 		    rxskew != DP83867_STRAP_STS2_CLK_SKEW_NONE)
 			pr_warn("PHY has delays via pin strapping, but phy-mode = 'rgmii'\n"
 				"Should be 'rgmii-id' to use internal delays\n");
 	}

 	/* RX delay *must* be specified if internal delay of RX is used. */
 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
 	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
 		ret = ofnode_read_u32(node, "ti,rx-internal-delay",
 				      &dp83867->rx_id_delay);
 		if (ret) {
 			pr_debug("ti,rx-internal-delay must be specified\n");
 			return ret;
 		}
 		if (dp83867->rx_id_delay > DP83867_RGMII_RX_CLK_DELAY_MAX) {
 			pr_debug("ti,rx-internal-delay value of %u out of range\n",
 				 dp83867->rx_id_delay);
 			return -EINVAL;
 		}
 	}

 	/* TX delay *must* be specified if internal delay of RX is used. */
 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
 	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
 		ret = ofnode_read_u32(node, "ti,tx-internal-delay",
 				      &dp83867->tx_id_delay);
 		if (ret) {
 			debug("ti,tx-internal-delay must be specified\n");
 			return ret;
 		}
 		if (dp83867->tx_id_delay > DP83867_RGMII_TX_CLK_DELAY_MAX) {
 			pr_debug("ti,tx-internal-delay value of %u out of range\n",
 				 dp83867->tx_id_delay);
 			return -EINVAL;
 		}
 	}

 	dp83867->fifo_depth = ofnode_read_u32_default(node, "ti,fifo-depth",
 						      DEFAULT_FIFO_DEPTH);
 	if (ofnode_read_bool(node, "enet-phy-lane-swap"))
 		dp83867->port_mirroring = DP83867_PORT_MIRRORING_EN;

 	if (ofnode_read_bool(node, "enet-phy-lane-no-swap"))
 		dp83867->port_mirroring = DP83867_PORT_MIRRORING_DIS;

 	if (ofnode_read_bool(node, "ti,sgmii-ref-clock-output-enable"))
 		dp83867->sgmii_ref_clk_en = true;

 	return 0;
 }

 static int dp83867_config(struct phy_device *phydev)
 {
 	struct dp83867_private *dp83867;
 	int val, delay, cfg2;
 	int ret, bs;

 	dp83867 = (struct dp83867_private *)phydev->priv;

 	ret = dp83867_of_init(phydev);
 	if (ret)
 		return ret;

 	/* Restart the PHY.  */
 	val = phy_read(phydev, MDIO_DEVAD_NONE, DP83867_CTRL);
 	phy_write(phydev, MDIO_DEVAD_NONE, DP83867_CTRL,
 		  val | DP83867_SW_RESTART);

 	/* Mode 1 or 2 workaround */
 	if (dp83867->rxctrl_strap_quirk) {
 		val = phy_read_mmd(phydev, DP83867_DEVADDR,
 				   DP83867_CFG4);
 		val &= ~BIT(7);
 		phy_write_mmd(phydev, DP83867_DEVADDR,
 			      DP83867_CFG4, val);
 	}

 	if (phy_interface_is_rgmii(phydev)) {
 		val = phy_read(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL);
 		if (val < 0) {
 			ret = val;
 			goto err_out;
 		}

 		val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK;
 		val |= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT);

 		/* Do not force link good */
 		val &= ~DP83867_PHYCR_FORCE_LINK_GOOD;

 		/* The code below checks if "port mirroring" N/A MODE4 has been
 		 * enabled during power on bootstrap.
 		 *
 		 * Such N/A mode enabled by mistake can put PHY IC in some
 		 * internal testing mode and disable RGMII transmission.
 		 *
 		 * In this particular case one needs to check STRAP_STS1
 		 * register's bit 11 (marked as RESERVED).
 		 */

 		bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS1);
 		if (bs & DP83867_STRAP_STS1_RESERVED)
 			val &= ~DP83867_PHYCR_RESERVED_MASK;

 		ret = phy_write(phydev, MDIO_DEVAD_NONE,
 				MII_DP83867_PHYCTRL, val);

 		val = phy_read_mmd(phydev, DP83867_DEVADDR,
 				   DP83867_RGMIICTL);

 		val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN |
 			 DP83867_RGMII_RX_CLK_DELAY_EN);
 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
 			val |= (DP83867_RGMII_TX_CLK_DELAY_EN |
 				DP83867_RGMII_RX_CLK_DELAY_EN);

 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
 			val |= DP83867_RGMII_TX_CLK_DELAY_EN;

 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
 			val |= DP83867_RGMII_RX_CLK_DELAY_EN;

 		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL, val);

 		delay = (dp83867->rx_id_delay |
 			(dp83867->tx_id_delay <<
 			DP83867_RGMII_TX_CLK_DELAY_SHIFT));

 		phy_write_mmd(phydev, DP83867_DEVADDR,
 			      DP83867_RGMIIDCTL, delay);
 	}

 	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
 		if (dp83867->sgmii_ref_clk_en)
 			phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL,
 				      DP83867_SGMII_TYPE);

 		phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
 			  (BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));

 		cfg2 = phy_read(phydev, phydev->addr, MII_DP83867_CFG2);
 		cfg2 &= MII_DP83867_CFG2_MASK;
 		cfg2 |= (MII_DP83867_CFG2_SPEEDOPT_10EN |
 			 MII_DP83867_CFG2_SGMII_AUTONEGEN |
 			 MII_DP83867_CFG2_SPEEDOPT_ENH |
 			 MII_DP83867_CFG2_SPEEDOPT_CNT |
 			 MII_DP83867_CFG2_SPEEDOPT_INTLOW);
 		phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_CFG2, cfg2);

 		phy_write_mmd(phydev, DP83867_DEVADDR,
 			      DP83867_RGMIICTL, 0x0);

 		phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
 			  DP83867_PHYCTRL_SGMIIEN |
 			  (DP83867_MDI_CROSSOVER_MDIX <<
 			  DP83867_MDI_CROSSOVER) |
 			  (dp83867->fifo_depth << DP83867_PHYCTRL_RXFIFO_SHIFT) |
 			  (dp83867->fifo_depth << DP83867_PHYCTRL_TXFIFO_SHIFT));
 		phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_BISCR, 0x0);
 	}

 	if (dp83867->io_impedance >= 0) {
 		val = phy_read_mmd(phydev,
 				   DP83867_DEVADDR,
 				   DP83867_IO_MUX_CFG);
 		val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
 		val |= dp83867->io_impedance &
 		       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
 		phy_write_mmd(phydev, DP83867_DEVADDR,
 			      DP83867_IO_MUX_CFG, val);
 	}

 	if (dp83867->port_mirroring != DP83867_PORT_MIRRORING_KEEP)
 		dp83867_config_port_mirroring(phydev);

 	/* Clock output selection if muxing property is set */
 	if (dp83867->set_clk_output) {
 		val = phy_read_mmd(phydev, DP83867_DEVADDR,
 				   DP83867_IO_MUX_CFG);

 		if (dp83867->clk_output_sel == DP83867_CLK_O_SEL_OFF) {
 			val |= DP83867_IO_MUX_CFG_CLK_O_DISABLE;
 		} else {
 			val &= ~(DP83867_IO_MUX_CFG_CLK_O_SEL_MASK |
 				 DP83867_IO_MUX_CFG_CLK_O_DISABLE);
 			val |= dp83867->clk_output_sel <<
 			       DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT;
 		}
 		phy_write_mmd(phydev, DP83867_DEVADDR,
 			      DP83867_IO_MUX_CFG, val);
 	}

 	genphy_config_aneg(phydev);
 	return 0;

 err_out:
 	return ret;
 }

 static int dp83867_probe(struct phy_device *phydev)
 {
 	struct dp83867_private *dp83867;

 	dp83867 = kzalloc(sizeof(*dp83867), GFP_KERNEL);
 	if (!dp83867)
 		return -ENOMEM;

 	phydev->priv = dp83867;
 	return 0;
 }

 U_BOOT_PHY_DRIVER(dp83867) = {
 	.name = "TI DP83867",
 	.uid = 0x2000a231,
 	.mask = 0xfffffff0,
 	.features = PHY_GBIT_FEATURES,
 	.probe = dp83867_probe,
 	.config = &dp83867_config,
 	.startup = &genphy_startup,
 	.shutdown = &genphy_shutdown,
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* TI PHY drivers
	*
	*/
	#include <common.h>
	#include <log.h>
	#include <phy.h>
	#include <dm/devres.h>
	#include <linux/bitops.h>
	#include <linux/compat.h>
	#include <malloc.h>

	#include <dm.h>
	#include <dt-bindings/net/ti-dp83867.h>

	#include "ti_phy_init.h"

	/* TI DP83867 */
	#define DP83867_DEVADDR 0x1f

	#define MII_DP83867_PHYCTRL 0x10
	#define MII_DP83867_MICR 0x12
	#define MII_DP83867_CFG2 0x14
	#define MII_DP83867_BISCR 0x16
	#define DP83867_CTRL 0x1f

	/* Extended Registers */
	#define DP83867_CFG4 0x0031
	#define DP83867_RGMIICTL 0x0032
	#define DP83867_STRAP_STS1 0x006E
	#define DP83867_STRAP_STS2 0x006f
	#define DP83867_RGMIIDCTL 0x0086
	#define DP83867_IO_MUX_CFG 0x0170
	#define DP83867_SGMIICTL 0x00D3

	#define DP83867_SW_RESET BIT(15)
	#define DP83867_SW_RESTART BIT(14)

	/* MICR Interrupt bits */
	#define MII_DP83867_MICR_AN_ERR_INT_EN BIT(15)
	#define MII_DP83867_MICR_SPEED_CHNG_INT_EN BIT(14)
	#define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN BIT(13)
	#define MII_DP83867_MICR_PAGE_RXD_INT_EN BIT(12)
	#define MII_DP83867_MICR_AUTONEG_COMP_INT_EN BIT(11)
	#define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN BIT(10)
	#define MII_DP83867_MICR_FALSE_CARRIER_INT_EN BIT(8)
	#define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4)
	#define MII_DP83867_MICR_WOL_INT_EN BIT(3)
	#define MII_DP83867_MICR_XGMII_ERR_INT_EN BIT(2)
	#define MII_DP83867_MICR_POL_CHNG_INT_EN BIT(1)
	#define MII_DP83867_MICR_JABBER_INT_EN BIT(0)

	/* RGMIICTL bits */
	#define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1)
	#define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0)

	/* STRAP_STS1 bits */
	#define DP83867_STRAP_STS1_RESERVED BIT(11)

	/* STRAP_STS2 bits */
	#define DP83867_STRAP_STS2_CLK_SKEW_TX_MASK GENMASK(6, 4)
	#define DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT 4
	#define DP83867_STRAP_STS2_CLK_SKEW_RX_MASK GENMASK(2, 0)
	#define DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT 0
	#define DP83867_STRAP_STS2_CLK_SKEW_NONE BIT(2)

	/* PHY CTRL bits */
	#define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14
	#define DP83867_PHYCR_FIFO_DEPTH_MASK GENMASK(15, 14)
	#define DP83867_PHYCR_RESERVED_MASK BIT(11)
	#define DP83867_PHYCR_FORCE_LINK_GOOD BIT(10)
	#define DP83867_MDI_CROSSOVER 5
	#define DP83867_MDI_CROSSOVER_MDIX 2
	#define DP83867_PHYCTRL_SGMIIEN 0x0800
	#define DP83867_PHYCTRL_RXFIFO_SHIFT 12
	#define DP83867_PHYCTRL_TXFIFO_SHIFT 14

	/* RGMIIDCTL bits */
	#define DP83867_RGMII_TX_CLK_DELAY_MAX 0xf
	#define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4
	#define DP83867_RGMII_RX_CLK_DELAY_MAX 0xf

	/* CFG2 bits */
	#define MII_DP83867_CFG2_SPEEDOPT_10EN 0x0040
	#define MII_DP83867_CFG2_SGMII_AUTONEGEN 0x0080
	#define MII_DP83867_CFG2_SPEEDOPT_ENH 0x0100
	#define MII_DP83867_CFG2_SPEEDOPT_CNT 0x0800
	#define MII_DP83867_CFG2_SPEEDOPT_INTLOW 0x2000
	#define MII_DP83867_CFG2_MASK 0x003F

	/* User setting - can be taken from DTS */
	#define DEFAULT_FIFO_DEPTH DP83867_PHYCR_FIFO_DEPTH_4_B_NIB

	/* IO_MUX_CFG bits */
	#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f

	#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
	#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
	#define DP83867_IO_MUX_CFG_CLK_O_DISABLE BIT(6)
	#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8
	#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK \
	GENMASK(0x1f, DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT)

	/* CFG4 bits */
	#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)

	/* SGMIICTL bits */
	#define DP83867_SGMII_TYPE BIT(14)

	enum {
	DP83867_PORT_MIRRORING_KEEP,
	DP83867_PORT_MIRRORING_EN,
	DP83867_PORT_MIRRORING_DIS,
	};

	struct dp83867_private {
	u32 rx_id_delay;
	u32 tx_id_delay;
	int fifo_depth;
	int io_impedance;
	bool rxctrl_strap_quirk;
	int port_mirroring;
	bool set_clk_output;
	unsigned int clk_output_sel;
	bool sgmii_ref_clk_en;
	};

	static int dp83867_config_port_mirroring(struct phy_device *phydev)
	{
	struct dp83867_private *dp83867 =
	(struct dp83867_private *)phydev->priv;
	u16 val;

	val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);

	if (dp83867->port_mirroring == DP83867_PORT_MIRRORING_EN)
	val \|= DP83867_CFG4_PORT_MIRROR_EN;
	else
	val &= ~DP83867_CFG4_PORT_MIRROR_EN;

	phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);

	return 0;
	}

	/**
	* dp83867_data_init - Convenience function for setting PHY specific data
	*
	* @phydev: the phy_device struct
	*/
	static int dp83867_of_init(struct phy_device *phydev)
	{
	struct dp83867_private *dp83867 = phydev->priv;
	ofnode node;
	int ret;

	node = phy_get_ofnode(phydev);
	if (!ofnode_valid(node))
	return 0;

	/* Optional configuration */
	ret = ofnode_read_u32(node, "ti,clk-output-sel",
	&dp83867->clk_output_sel);
	/* If not set, keep default */
	if (!ret) {
	dp83867->set_clk_output = true;
	/* Valid values are 0 to DP83867_CLK_O_SEL_REF_CLK or
	* DP83867_CLK_O_SEL_OFF.
	*/
	if (dp83867->clk_output_sel > DP83867_CLK_O_SEL_REF_CLK &&
	dp83867->clk_output_sel != DP83867_CLK_O_SEL_OFF) {
	pr_debug("ti,clk-output-sel value %u out of range\n",
	dp83867->clk_output_sel);
	return -EINVAL;
	}
	}

	if (ofnode_read_bool(node, "ti,max-output-impedance"))
	dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
	else if (ofnode_read_bool(node, "ti,min-output-impedance"))
	dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN;
	else
	dp83867->io_impedance = -EINVAL;

	if (ofnode_read_bool(node, "ti,dp83867-rxctrl-strap-quirk"))
	dp83867->rxctrl_strap_quirk = true;

	/* Existing behavior was to use default pin strapping delay in rgmii
	* mode, but rgmii should have meant no delay. Warn existing users.
	*/
	if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
	u16 val = phy_read_mmd(phydev, DP83867_DEVADDR,
	DP83867_STRAP_STS2);
	u16 txskew = (val & DP83867_STRAP_STS2_CLK_SKEW_TX_MASK) >>
	DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT;
	u16 rxskew = (val & DP83867_STRAP_STS2_CLK_SKEW_RX_MASK) >>
	DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT;

	if (txskew != DP83867_STRAP_STS2_CLK_SKEW_NONE \|\|
	rxskew != DP83867_STRAP_STS2_CLK_SKEW_NONE)
	pr_warn("PHY has delays via pin strapping, but phy-mode = 'rgmii'\n"
	"Should be 'rgmii-id' to use internal delays\n");
	}

	/* RX delay must be specified if internal delay of RX is used. */
	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID \|\|
	phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
	ret = ofnode_read_u32(node, "ti,rx-internal-delay",
	&dp83867->rx_id_delay);
	if (ret) {
	pr_debug("ti,rx-internal-delay must be specified\n");
	return ret;
	}
	if (dp83867->rx_id_delay > DP83867_RGMII_RX_CLK_DELAY_MAX) {
	pr_debug("ti,rx-internal-delay value of %u out of range\n",
	dp83867->rx_id_delay);
	return -EINVAL;
	}
	}

	/* TX delay must be specified if internal delay of RX is used. */
	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID \|\|
	phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
	ret = ofnode_read_u32(node, "ti,tx-internal-delay",
	&dp83867->tx_id_delay);
	if (ret) {
	debug("ti,tx-internal-delay must be specified\n");
	return ret;
	}
	if (dp83867->tx_id_delay > DP83867_RGMII_TX_CLK_DELAY_MAX) {
	pr_debug("ti,tx-internal-delay value of %u out of range\n",
	dp83867->tx_id_delay);
	return -EINVAL;
	}
	}

	dp83867->fifo_depth = ofnode_read_u32_default(node, "ti,fifo-depth",
	DEFAULT_FIFO_DEPTH);
	if (ofnode_read_bool(node, "enet-phy-lane-swap"))
	dp83867->port_mirroring = DP83867_PORT_MIRRORING_EN;

	if (ofnode_read_bool(node, "enet-phy-lane-no-swap"))
	dp83867->port_mirroring = DP83867_PORT_MIRRORING_DIS;

	if (ofnode_read_bool(node, "ti,sgmii-ref-clock-output-enable"))
	dp83867->sgmii_ref_clk_en = true;

	return 0;
	}

	static int dp83867_config(struct phy_device *phydev)
	{
	struct dp83867_private *dp83867;
	int val, delay, cfg2;
	int ret, bs;

	dp83867 = (struct dp83867_private *)phydev->priv;

	ret = dp83867_of_init(phydev);
	if (ret)
	return ret;

	/* Restart the PHY. */
	val = phy_read(phydev, MDIO_DEVAD_NONE, DP83867_CTRL);
	phy_write(phydev, MDIO_DEVAD_NONE, DP83867_CTRL,
	val \| DP83867_SW_RESTART);

	/* Mode 1 or 2 workaround */
	if (dp83867->rxctrl_strap_quirk) {
	val = phy_read_mmd(phydev, DP83867_DEVADDR,
	DP83867_CFG4);
	val &= ~BIT(7);
	phy_write_mmd(phydev, DP83867_DEVADDR,
	DP83867_CFG4, val);
	}

	if (phy_interface_is_rgmii(phydev)) {
	val = phy_read(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL);
	if (val < 0) {
	ret = val;
	goto err_out;
	}

	val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK;
	val \|= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT);

	/* Do not force link good */
	val &= ~DP83867_PHYCR_FORCE_LINK_GOOD;

	/* The code below checks if "port mirroring" N/A MODE4 has been
	* enabled during power on bootstrap.
	*
	* Such N/A mode enabled by mistake can put PHY IC in some
	* internal testing mode and disable RGMII transmission.
	*
	* In this particular case one needs to check STRAP_STS1
	* register's bit 11 (marked as RESERVED).
	*/

	bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS1);
	if (bs & DP83867_STRAP_STS1_RESERVED)
	val &= ~DP83867_PHYCR_RESERVED_MASK;

	ret = phy_write(phydev, MDIO_DEVAD_NONE,
	MII_DP83867_PHYCTRL, val);

	val = phy_read_mmd(phydev, DP83867_DEVADDR,
	DP83867_RGMIICTL);

	val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN \|
	DP83867_RGMII_RX_CLK_DELAY_EN);
	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
	val \|= (DP83867_RGMII_TX_CLK_DELAY_EN \|
	DP83867_RGMII_RX_CLK_DELAY_EN);

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
	val \|= DP83867_RGMII_TX_CLK_DELAY_EN;

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
	val \|= DP83867_RGMII_RX_CLK_DELAY_EN;

	phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL, val);

	delay = (dp83867->rx_id_delay \|
	(dp83867->tx_id_delay <<
	DP83867_RGMII_TX_CLK_DELAY_SHIFT));

	phy_write_mmd(phydev, DP83867_DEVADDR,
	DP83867_RGMIIDCTL, delay);
	}

	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
	if (dp83867->sgmii_ref_clk_en)
	phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL,
	DP83867_SGMII_TYPE);

	phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
	(BMCR_ANENABLE \| BMCR_FULLDPLX \| BMCR_SPEED1000));

	cfg2 = phy_read(phydev, phydev->addr, MII_DP83867_CFG2);
	cfg2 &= MII_DP83867_CFG2_MASK;
	cfg2 \|= (MII_DP83867_CFG2_SPEEDOPT_10EN \|
	MII_DP83867_CFG2_SGMII_AUTONEGEN \|
	MII_DP83867_CFG2_SPEEDOPT_ENH \|
	MII_DP83867_CFG2_SPEEDOPT_CNT \|
	MII_DP83867_CFG2_SPEEDOPT_INTLOW);
	phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_CFG2, cfg2);

	phy_write_mmd(phydev, DP83867_DEVADDR,
	DP83867_RGMIICTL, 0x0);

	phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
	DP83867_PHYCTRL_SGMIIEN \|
	(DP83867_MDI_CROSSOVER_MDIX <<
	DP83867_MDI_CROSSOVER) \|
	(dp83867->fifo_depth << DP83867_PHYCTRL_RXFIFO_SHIFT) \|
	(dp83867->fifo_depth << DP83867_PHYCTRL_TXFIFO_SHIFT));
	phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_BISCR, 0x0);
	}

	if (dp83867->io_impedance >= 0) {
	val = phy_read_mmd(phydev,
	DP83867_DEVADDR,
	DP83867_IO_MUX_CFG);
	val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
	val \|= dp83867->io_impedance &
	DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
	phy_write_mmd(phydev, DP83867_DEVADDR,
	DP83867_IO_MUX_CFG, val);
	}

	if (dp83867->port_mirroring != DP83867_PORT_MIRRORING_KEEP)
	dp83867_config_port_mirroring(phydev);

	/* Clock output selection if muxing property is set */
	if (dp83867->set_clk_output) {
	val = phy_read_mmd(phydev, DP83867_DEVADDR,
	DP83867_IO_MUX_CFG);

	if (dp83867->clk_output_sel == DP83867_CLK_O_SEL_OFF) {
	val \|= DP83867_IO_MUX_CFG_CLK_O_DISABLE;
	} else {
	val &= ~(DP83867_IO_MUX_CFG_CLK_O_SEL_MASK \|
	DP83867_IO_MUX_CFG_CLK_O_DISABLE);
	val \|= dp83867->clk_output_sel <<
	DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT;
	}
	phy_write_mmd(phydev, DP83867_DEVADDR,
	DP83867_IO_MUX_CFG, val);
	}

	genphy_config_aneg(phydev);
	return 0;

	err_out:
	return ret;
	}

	static int dp83867_probe(struct phy_device *phydev)
	{
	struct dp83867_private *dp83867;

	dp83867 = kzalloc(sizeof(*dp83867), GFP_KERNEL);
	if (!dp83867)
	return -ENOMEM;

	phydev->priv = dp83867;
	return 0;
	}

	U_BOOT_PHY_DRIVER(dp83867) = {
	.name = "TI DP83867",
	.uid = 0x2000a231,
	.mask = 0xfffffff0,
	.features = PHY_GBIT_FEATURES,
	.probe = dp83867_probe,
	.config = &dp83867_config,
	.startup = &genphy_startup,
	.shutdown = &genphy_shutdown,
	};