8610: Add console frame buffer support to FSL 8610 DIU driver.
Add cfb console support to FSL 8610 DIU driver.
Inspect board version from PIXIS to obtain correct pixel format.
Use #define CONFIG_VIDEO in config file to enable fb console.
To switch monitor, set monitor variable to
0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
followed by "diufb init".
Preserve logo bitmap at the top of the fb console.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
index 4449376..b70637f 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -32,40 +32,55 @@
#include "../common/pixis.h"
#include "../common/fsl_diu_fb.h"
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+#include <devices.h>
+#include <video_fb.h>
+#endif
extern unsigned int FSL_Logo_BMP[];
+static int xres, yres;
+
void mpc8610hpcd_diu_init(void)
{
char *monitor_port;
- int xres, gamma_fix;
+ int gamma_fix;
unsigned int pixel_format;
unsigned char tmp_val;
+ unsigned char pixis_arch;
tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
- monitor_port = getenv ("monitor");
+ pixis_arch = in8(PIXIS_BASE + PIXIS_VER);
+ monitor_port = getenv("monitor");
if (!strncmp(monitor_port, "0", 1)) { /* 0 - DVI */
xres = 1280;
- pixel_format = 0x88882317;
+ yres = 1024;
+ if (pixis_arch == 0x01)
+ pixel_format = 0x88882317;
+ else
+ pixel_format = 0x88883316;
gamma_fix = 0;
out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x08);
} else if (!strncmp(monitor_port, "1", 1)) { /* 1 - Single link LVDS */
xres = 1024;
+ yres = 768;
pixel_format = 0x88883316;
gamma_fix = 0;
out8(PIXIS_BASE + PIXIS_BRDCFG0, (tmp_val & 0xf7) | 0x10);
} else if (!strncmp(monitor_port, "2", 1)) { /* 2 - Double link LVDS */
xres = 1280;
+ yres = 1024;
pixel_format = 0x88883316;
gamma_fix = 1;
out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xe7);
} else { /* DVI */
xres = 1280;
+ yres = 1024;
pixel_format = 0x88882317;
gamma_fix = 0;
out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x08);
@@ -86,7 +101,12 @@
}
if (!strncmp(argv[1],"init",4)) {
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+ fsl_diu_clear_screen();
+ drv_video_init();
+#else
mpc8610hpcd_diu_init();
+#endif
} else {
addr = simple_strtoul(argv[1], NULL, 16);
fsl_diu_clear_screen();
@@ -102,4 +122,56 @@
"init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n"
);
+
+
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+
+/*
+ * The Graphic Device
+ */
+GraphicDevice ctfb;
+void *video_hw_init(void)
+{
+ GraphicDevice *pGD = (GraphicDevice *) &ctfb;
+ struct fb_info *info;
+
+ mpc8610hpcd_diu_init();
+
+ /* fill in Graphic device struct */
+ sprintf(pGD->modeIdent,
+ "%dx%dx%d %ldkHz %ldHz",
+ xres, yres, 32, 64, 60);
+
+ pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);
+ pGD->winSizeX = xres;
+ pGD->winSizeY = yres - info->logo_height;
+ pGD->plnSizeX = pGD->winSizeX;
+ pGD->plnSizeY = pGD->winSizeY;
+
+ pGD->gdfBytesPP = 4;
+ pGD->gdfIndex = GDF_32BIT_X888RGB;
+
+ pGD->isaBase = 0;
+ pGD->pciBase = 0;
+ pGD->memSize = info->screen_size - info->logo_size;
+
+ /* Cursor Start Address */
+ pGD->dprBase = 0;
+ pGD->vprBase = 0;
+ pGD->cprBase = 0;
+
+ return (void *)pGD;
+}
+
+void video_set_lut (unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ )
+{
+ return;
+}
+
+#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
+
#endif /* CONFIG_FSL_DIU_FB */
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 00c94ef..f5d9c09 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -22,6 +22,15 @@
#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */
+
+/* video */
+#undef CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#endif
+
#ifdef RUN_DIAG
#define CFG_DIAG_ADDR 0xff800000
#endif
@@ -314,15 +323,17 @@
#define CONFIG_EEPRO100
#define CONFIG_TULIP
-#if 0 /* TODO */
/************************************************************
* USB support
************************************************************/
-#define CONFIG_USB_OHCI 1
+#define CONFIG_PCI_OHCI 1
+#define CONFIG_USB_OHCI_NEW 1
#define CONFIG_USB_KEYBOARD 1
#define CFG_DEVICE_DEREGISTER
-#define CFG_USB_INTERRUPT_POLL 1
-#endif
+#define CFG_USB_EVENT_POLL 1
+#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#define CFG_OHCI_SWAP_REG_ACCESS 1
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
@@ -472,6 +483,7 @@
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SCSI
#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_USB
#endif