mmc: Fix version check for clock API in sdhci driver
When setting up the clocks in the sdhci driver, the "spec version"
must be masked off. Otherwise any time the vendor version is not 0,
the check will allways assume the interface is version 3. This breaks
when the interface is actually version 1 or 2.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 1709643..b07dc00 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -260,7 +260,7 @@
if (clock == 0)
return 0;
- if (host->version >= SDHCI_SPEC_300) {
+ if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) {
/* Version 3.00 divisors must be a multiple of 2. */
if (mmc->f_max <= clock)
div = 1;
@@ -347,10 +347,10 @@
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if (mmc->bus_width == 8) {
ctrl &= ~SDHCI_CTRL_4BITBUS;
- if (host->version >= SDHCI_SPEC_300)
+ if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
ctrl |= SDHCI_CTRL_8BITBUS;
} else {
- if (host->version >= SDHCI_SPEC_300)
+ if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
ctrl &= ~SDHCI_CTRL_8BITBUS;
if (mmc->bus_width == 4)
ctrl |= SDHCI_CTRL_4BITBUS;
@@ -421,7 +421,7 @@
if (max_clk)
mmc->f_max = max_clk;
else {
- if (host->version >= SDHCI_SPEC_300)
+ if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
mmc->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
>> SDHCI_CLOCK_BASE_SHIFT;
else
@@ -436,7 +436,7 @@
if (min_clk)
mmc->f_min = min_clk;
else {
- if (host->version >= SDHCI_SPEC_300)
+ if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_300;
else
mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_200;