gpio: add sl28cpld driver
The gpio block is part of the sl28cpld sl28cpld management controller.
There are three different flavors: the usual input and output where the
direction is configurable, but also input only and output only variants.
Signed-off-by: Michael Walle <michael@walle.cc>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/drivers/gpio/sl28cpld-gpio.c b/drivers/gpio/sl28cpld-gpio.c
new file mode 100644
index 0000000..700fc3d
--- /dev/null
+++ b/drivers/gpio/sl28cpld-gpio.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * GPIO driver for the sl28cpld
+ *
+ * Copyright (c) 2021 Michael Walle <michael@walle.cc>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/gpio.h>
+#include <sl28cpld.h>
+
+/* GPIO flavor */
+#define SL28CPLD_GPIO_DIR 0x00
+#define SL28CPLD_GPIO_OUT 0x01
+#define SL28CPLD_GPIO_IN 0x02
+
+/* input-only flavor */
+#define SL28CPLD_GPI_IN 0x00
+
+/* output-only flavor */
+#define SL28CPLD_GPO_OUT 0x00
+
+enum {
+ SL28CPLD_GPIO,
+ SL28CPLD_GPI,
+ SL28CPLD_GPO,
+};
+
+static int sl28cpld_gpio_get_value(struct udevice *dev, unsigned int gpio)
+{
+ ulong type = dev_get_driver_data(dev);
+ int val, reg;
+
+ switch (type) {
+ case SL28CPLD_GPIO:
+ reg = SL28CPLD_GPIO_IN;
+ break;
+ case SL28CPLD_GPI:
+ reg = SL28CPLD_GPI_IN;
+ break;
+ case SL28CPLD_GPO:
+ /* we are output only, thus just return the output value */
+ reg = SL28CPLD_GPO_OUT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val = sl28cpld_read(dev, reg);
+
+ return val < 0 ? val : !!(val & BIT(gpio));
+}
+
+static int sl28cpld_gpio_set_value(struct udevice *dev, unsigned int gpio,
+ int value)
+{
+ ulong type = dev_get_driver_data(dev);
+ uint reg;
+
+ switch (type) {
+ case SL28CPLD_GPIO:
+ reg = SL28CPLD_GPIO_OUT;
+ break;
+ case SL28CPLD_GPO:
+ reg = SL28CPLD_GPO_OUT;
+ break;
+ case SL28CPLD_GPI:
+ default:
+ return -EINVAL;
+ }
+
+ if (value)
+ return sl28cpld_update(dev, reg, 0, BIT(gpio));
+ else
+ return sl28cpld_update(dev, reg, BIT(gpio), 0);
+}
+
+static int sl28cpld_gpio_direction_input(struct udevice *dev, unsigned int gpio)
+{
+ ulong type = dev_get_driver_data(dev);
+
+ switch (type) {
+ case SL28CPLD_GPI:
+ return 0;
+ case SL28CPLD_GPIO:
+ return sl28cpld_update(dev, SL28CPLD_GPIO_DIR, BIT(gpio), 0);
+ case SL28CPLD_GPO:
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sl28cpld_gpio_direction_output(struct udevice *dev,
+ unsigned int gpio, int value)
+{
+ ulong type = dev_get_driver_data(dev);
+ int ret;
+
+ /* set_value() will report an error if we are input-only */
+ ret = sl28cpld_gpio_set_value(dev, gpio, value);
+ if (ret)
+ return ret;
+
+ if (type == SL28CPLD_GPIO)
+ return sl28cpld_update(dev, SL28CPLD_GPIO_DIR, 0, BIT(gpio));
+
+ return 0;
+}
+
+static int sl28cpld_gpio_get_function(struct udevice *dev, unsigned int gpio)
+{
+ ulong type = dev_get_driver_data(dev);
+ int val;
+
+ switch (type) {
+ case SL28CPLD_GPIO:
+ val = sl28cpld_read(dev, SL28CPLD_GPIO_DIR);
+ if (val < 0)
+ return val;
+ if (val & BIT(gpio))
+ return GPIOF_OUTPUT;
+ else
+ return GPIOF_INPUT;
+ case SL28CPLD_GPI:
+ return GPIOF_INPUT;
+ case SL28CPLD_GPO:
+ return GPIOF_OUTPUT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct dm_gpio_ops sl28cpld_gpio_ops = {
+ .direction_input = sl28cpld_gpio_direction_input,
+ .direction_output = sl28cpld_gpio_direction_output,
+ .get_value = sl28cpld_gpio_get_value,
+ .set_value = sl28cpld_gpio_set_value,
+ .get_function = sl28cpld_gpio_get_function,
+};
+
+static int sl28cpld_gpio_probe(struct udevice *dev)
+{
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ uc_priv->gpio_count = 8;
+ uc_priv->bank_name = dev_read_name(dev);
+
+ return 0;
+}
+
+static const struct udevice_id sl28cpld_gpio_ids[] = {
+ { .compatible = "kontron,sl28cpld-gpio", .data = SL28CPLD_GPIO},
+ { .compatible = "kontron,sl28cpld-gpo", .data = SL28CPLD_GPO},
+ { .compatible = "kontron,sl28cpld-gpi", .data = SL28CPLD_GPI},
+ { }
+};
+
+U_BOOT_DRIVER(sl28cpld_gpio) = {
+ .name = "sl28cpld_gpio",
+ .id = UCLASS_GPIO,
+ .of_match = sl28cpld_gpio_ids,
+ .probe = sl28cpld_gpio_probe,
+ .ops = &sl28cpld_gpio_ops,
+};