mpc8xxx: USB: fix: access of ehci struct elements
This patch fixes the access to the 'ehci' struct elements which should
have been taken care off in 4ef01010aa4799c759d75e67007fdd3a38c88c8a
Sorry about that.
Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index bf148c4..c674929 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -41,15 +41,15 @@
struct usb_ehci *ehci;
ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
- hccr = (struct ehci_hccr *)((uint32_t)ehci->caplength);
+ hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
hcor = (struct ehci_hcor *)((uint32_t) hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
/* Set to Host mode */
- setbits_le32((void *)ehci->usbmode, CM_HOST);
+ setbits_le32(&ehci->usbmode, CM_HOST);
- out_be32((void *)ehci->snoop1, SNOOP_SIZE_2GB);
- out_be32((void *)ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
+ out_be32(&ehci->snoop1, SNOOP_SIZE_2GB);
+ out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
/* Init phy */
if (!strcmp(getenv("usb_phy_type"), "utmi"))
@@ -58,13 +58,13 @@
out_le32(&(hcor->or_portsc[0]), PORT_PTS_ULPI);
/* Enable interface. */
- setbits_be32((void *)ehci->control, USB_EN);
+ setbits_be32(&ehci->control, USB_EN);
- out_be32((void *)ehci->prictrl, 0x0000000c);
- out_be32((void *)ehci->age_cnt_limit, 0x00000040);
- out_be32((void *)ehci->sictrl, 0x00000001);
+ out_be32(&ehci->prictrl, 0x0000000c);
+ out_be32(&ehci->age_cnt_limit, 0x00000040);
+ out_be32(&ehci->sictrl, 0x00000001);
- in_le32((void *)ehci->usbmode);
+ in_le32(&ehci->usbmode);
return 0;
}