blob: 357ad14c9c2ce688e8cef7fb67415bb2326b79e0 [file] [log] [blame]
/*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _OMAP2420_SYS_H_
#define _OMAP2420_SYS_H_
#include <asm/arch/sizes.h>
/*
* 2420 specific Section
*/
/* CONTROL */
#define OMAP2420_CTRL_BASE (0x48000000)
#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8)
/* TAP information */
#define OMAP2420_TAP_BASE (0x48014000)
#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204)
/* GPMC */
#define OMAP2420_GPMC_BASE (0x6800A000)
#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10)
#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C)
#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40)
#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50)
#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60)
#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64)
#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68)
#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C)
#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70)
#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78)
#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90)
#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94)
#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98)
#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C)
#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0)
#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4)
#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8)
/* SMS */
#define OMAP2420_SMS_BASE 0x68008000
#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10)
/* SDRC */
#define OMAP2420_SDRC_BASE 0x68009000
#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10)
#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14)
#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44)
#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60)
#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68)
#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70)
#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80)
#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84)
#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)
#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)
#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)
#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)
#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4)
#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8)
#define OMAP2420_SDRC_CS0 0x80000000
#define OMAP2420_SDRC_CS1 0xA0000000
#define CMD_NOP 0x0
#define CMD_PRECHARGE 0x1
#define CMD_AUTOREFRESH 0x2
#define CMD_ENTR_PWRDOWN 0x3
#define CMD_EXIT_PWRDOWN 0x4
#define CMD_ENTR_SRFRSH 0x5
#define CMD_CKE_HIGH 0x6
#define CMD_CKE_LOW 0x7
#define SOFTRESET BIT1
#define SMART_IDLE (0x2 << 3)
#define REF_ON_IDLE (0x1 << 6)
/* UART */
#define OMAP2420_UART1 0x4806A000
#define OMAP2420_UART2 0x4806C000
#define OMAP2420_UART3 0x4806E000
/* General Purpose Timers */
#define OMAP2420_GPT1 0x48028000
#define OMAP2420_GPT2 0x4802A000
#define OMAP2420_GPT3 0x48078000
#define OMAP2420_GPT4 0x4807A000
#define OMAP2420_GPT5 0x4807C000
#define OMAP2420_GPT6 0x4807E000
#define OMAP2420_GPT7 0x48080000
#define OMAP2420_GPT8 0x48082000
#define OMAP2420_GPT9 0x48084000
#define OMAP2420_GPT10 0x48086000
#define OMAP2420_GPT11 0x48088000
#define OMAP2420_GPT12 0x4808A000
/* timer regs offsets (32 bit regs) */
#define TIDR 0x0 /* r */
#define TIOCP_CFG 0x10 /* rw */
#define TISTAT 0x14 /* r */
#define TISR 0x18 /* rw */
#define TIER 0x1C /* rw */
#define TWER 0x20 /* rw */
#define TCLR 0x24 /* rw */
#define TCRR 0x28 /* rw */
#define TLDR 0x2C /* rw */
#define TTGR 0x30 /* rw */
#define TWPS 0x34 /* r */
#define TMAR 0x38 /* rw */
#define TCAR1 0x3c /* r */
#define TSICR 0x40 /* rw */
#define TCAR2 0x44 /* r */
/* WatchDog Timers (1 secure, 3 GP) */
#define WD1_BASE 0x48020000
#define WD2_BASE 0x48022000
#define WD3_BASE 0x48024000
#define WD4_BASE 0x48026000
#define WWPS 0x34 /* r */
#define WSPR 0x48 /* rw */
#define WD_UNLOCK1 0xAAAA
#define WD_UNLOCK2 0x5555
/* PRCM */
#define OMAP2420_CM_BASE 0x48008000
#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)
#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140)
#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200)
#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204)
#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210)
#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214)
#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240)
#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440)
#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244)
#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340)
#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450)
#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500)
#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520)
#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540)
#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544)
#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840)
/*
* H4 specific Section
*/
/*
* The 2420's chip selects are programmable. The mask ROM
* does configure CS0 to 0x08000000 before dispatch. So, if
* you want your code to live below that address, you have to
* be prepared to jump though hoops, to reset the base address.
*/
#if defined(CONFIG_OMAP2420H4)
/* GPMC */
#ifdef CONFIG_VIRTIO_A /* Pre version B */
# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */
# define H4_CS1_BASE 0x04000000 /* debug board */
# define H4_CS2_BASE 0x0A000000 /* wifi board */
#else
# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */
# define H4_CS1_BASE 0x08000000 /* debug board */
# define H4_CS2_BASE 0x0A000000 /* wifi board */
#endif
/* base address for indirect vectors (internal boot mode) */
#define SRAM_OFFSET0 0x40000000
#define SRAM_OFFSET1 0x00200000
#define SRAM_OFFSET2 0x0000F800
#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
#define PERIFERAL_PORT_BASE 0x480FE003
/* FPGA on Debug board.*/
#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b)
#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c)
#endif /* endif CONFIG_2420H4 */
#endif