ppc4xx: ML507 Board Support
The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
among others:
-Virtex 5 FX FPGA (With a ppc440x5 in it)
-256MB of SDRAM2
-32MB of Flash
-I2C Eeprom
-System ACE chip
-Serial ATA connectors
-RS232 Level Conversors
-Ethernet Transceiver
This patch gives support to a standard design produced by EDK for this
board: ppc440, uartlite, xilinx_int and flash
- Includes Changes propossed by Stefan Roese and Michal Simek
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Acked-by: Stefan Roese <sr@denx.de>
diff --git a/board/xilinx/ml507/xparameters.h b/board/xilinx/ml507/xparameters.h
new file mode 100644
index 0000000..1542e84
--- /dev/null
+++ b/board/xilinx/ml507/xparameters.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ * based on xparameters-ml507.h by Xilinx
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef XPARAMETER_H
+#define XPARAMETER_H
+
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
+#define XPAR_INTC_0_BASEADDR 0x81800000
+#define XPAR_UARTLITE_0_BASEADDR 0x84000000
+#define XPAR_IIC_EEPROM_BASEADDR 0x81600000
+#define XPAR_LLTEMAC_0_BASEADDR 0x81c00000
+#define XPAR_FLASH_MEM0_BASEADDR 0xFC000000
+#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ 400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13
+
+#endif