board_f: Drop return value from initdram()
At present we cannot use this function as an init sequence call without a
wrapper, since it returns the RAM size. Adjust it to set the RAM size in
global_data instead, and return 0 on success.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/board/imgtec/boston/ddr.c b/board/imgtec/boston/ddr.c
index c841bf0..b92ff2a 100644
--- a/board/imgtec/boston/ddr.c
+++ b/board/imgtec/boston/ddr.c
@@ -10,11 +10,16 @@
#include "boston-regs.h"
-phys_size_t initdram(void)
+DECLARE_GLOBAL_DATA_PTR;
+
+int initdram(void)
{
u32 ddrconf0 = __raw_readl((uint32_t *)BOSTON_PLAT_DDRCONF0);
- return (phys_size_t)(ddrconf0 & BOSTON_PLAT_DDRCONF0_SIZE) << 30;
+ gd->ram_size = (phys_size_t)(ddrconf0 & BOSTON_PLAT_DDRCONF0_SIZE) <<
+ 30;
+
+ return 0;
}
ulong board_get_usable_ram_top(ulong total_size)
diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c
index c269d0a..f8c65b0 100644
--- a/board/imgtec/malta/malta.c
+++ b/board/imgtec/malta/malta.c
@@ -19,6 +19,8 @@
#include "superio.h"
+DECLARE_GLOBAL_DATA_PTR;
+
enum core_card {
CORE_UNKNOWN,
CORE_LV,
@@ -83,9 +85,11 @@
}
}
-phys_size_t initdram(void)
+int initdram(void)
{
- return CONFIG_SYS_MEM_SIZE;
+ gd->ram_size = CONFIG_SYS_MEM_SIZE;
+
+ return 0;
}
int checkboard(void)
diff --git a/board/imgtec/xilfpga/xilfpga.c b/board/imgtec/xilfpga/xilfpga.c
index dc0a088..8aa7c10 100644
--- a/board/imgtec/xilfpga/xilfpga.c
+++ b/board/imgtec/xilfpga/xilfpga.c
@@ -11,10 +11,14 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* initialize the DDR Controller and PHY */
-phys_size_t initdram(void)
+int initdram(void)
{
/* MIG IP block is smart and doesn't need SW
* to do any init */
- return CONFIG_SYS_SDRAM_SIZE; /* in bytes */
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE; /* in bytes */
+
+ return 0;
}