tsec: Add support for BCM5482S PHY
Signed-off-by: Zach LeRoy <zleroy@xes-inc.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 399116f..63fc02e 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -468,6 +468,18 @@
}
/*
+ * "Ethernet@Wirespeed" needs to be enabled to achieve link in certain
+ * circumstances. eg a gigabit TSEC connected to a gigabit switch with
+ * a 4-wire ethernet cable. Both ends advertise gigabit, but can't
+ * link. "Ethernet@Wirespeed" reduces advertised speed until link
+ * can be achieved.
+ */
+uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
+{
+ return (read_phy_reg(priv, mii_reg) & 0x8FFF) | 0x8010;
+}
+
+/*
* Parse the BCM54xx status register for speed and duplex information.
* The linux sungem_phy has this information, but in a table format.
*/
@@ -1070,6 +1082,34 @@
},
};
+struct phy_info phy_info_BCM5482S = {
+ 0x0143bcb,
+ "Broadcom BCM5482S",
+ 4,
+ (struct phy_cmd[]) { /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ /* Setup read from auxilary control shadow register 7 */
+ {MIIM_BCM54xx_AUXCNTL, MIIM_BCM54xx_AUXCNTL_ENCODE(7), NULL},
+ /* Read Misc Control register and or in Ethernet@Wirespeed */
+ {MIIM_BCM54xx_AUXCNTL, 0, &mii_BCM54xx_wirespeed},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
+};
+
struct phy_info phy_info_M88E1011S = {
0x01410c6,
"Marvell 88E1011S",
@@ -1611,6 +1651,7 @@
&phy_info_cis8201,
&phy_info_BCM5461S,
&phy_info_BCM5464S,
+ &phy_info_BCM5482S,
&phy_info_M88E1011S,
&phy_info_M88E1111S,
&phy_info_M88E1118,
diff --git a/include/tsec.h b/include/tsec.h
index 9184256..0ac3034 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -152,6 +152,8 @@
#define MIIM_EXT_PAGE_ACCESS 0x1f
/* Broadcom BCM54xx -- taken from linux sungem_phy */
+#define MIIM_BCM54xx_AUXCNTL 0x18
+#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) ((val & 0x7) << 12)|(val & 0x7)
#define MIIM_BCM54xx_AUXSTATUS 0x19
#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8