Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx
diff --git a/Makefile b/Makefile
index d6a0299..4f4efa4 100644
--- a/Makefile
+++ b/Makefile
@@ -733,8 +733,15 @@
#########################################################################
## MPC512x Systems
#########################################################################
-ads5121_config: unconfig
- @$(MKCONFIG) ads5121 ppc mpc512x ads5121
+ads5121_config \
+ads5121_PCI_config \
+ : unconfig
+ @echo "" >$(obj)include/config.h
+ @if [ "$(findstring _PCI_,$@)" ] ; then \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+ $(XECHO) "... with PCI enabled" ; \
+ fi
+ @$(MKCONFIG) -a ads5121 ppc mpc512x ads5121
#########################################################################
diff --git a/board/actux1/actux1.c b/board/actux1/actux1.c
index b555fdb..d1d7f6c 100644
--- a/board/actux1/actux1.c
+++ b/board/actux1/actux1.c
@@ -89,7 +89,6 @@
*/
int checkboard (void)
{
- char revision;
char *s = getenv ("serial#");
puts ("Board: AcTux-1 rev.");
diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c
index f3a81a8..99daef6 100644
--- a/board/actux2/actux2.c
+++ b/board/actux2/actux2.c
@@ -96,11 +96,15 @@
*/
int checkboard (void)
{
- char revision;
char *s = getenv ("serial#");
puts ("Board: AcTux-2 rev.");
putc (ACTUX2_BOARDREL + 'A' - 1);
+
+ if (s != NULL) {
+ puts (", serial# ");
+ puts (s);
+ }
putc ('\n');
return (0);
@@ -127,8 +131,6 @@
void reset_phy (void)
{
- int i;
-
/* init IcPlus IP175C ethernet switch to native IP175C mode */
miiphy_write ("NPE0", 29, 31, 0x175C);
}
diff --git a/board/actux3/actux3.c b/board/actux3/actux3.c
index 647e4e7..812bc2b 100644
--- a/board/actux3/actux3.c
+++ b/board/actux3/actux3.c
@@ -111,7 +111,6 @@
*/
int checkboard (void)
{
- char revision;
char *s = getenv ("serial#");
puts ("Board: AcTux-3 rev.");
diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile
index cd8148c..b93bee1 100644
--- a/board/ads5121/Makefile
+++ b/board/ads5121/Makefile
@@ -25,8 +25,10 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
+COBJS-y := $(BOARD).o
+COBJS-$(CONFIG_PCI) += pci.o
+COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index 462f41d..8629b03 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -34,6 +34,7 @@
CLOCK_SCCR1_PSCFIFO_EN | \
CLOCK_SCCR1_DDR_EN | \
CLOCK_SCCR1_FEC_EN | \
+ CLOCK_SCCR1_PCI_EN | \
CLOCK_SCCR1_TPR_EN)
#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \
diff --git a/board/ads5121/pci.c b/board/ads5121/pci.c
new file mode 100644
index 0000000..a338604
--- /dev/null
+++ b/board/ads5121/pci.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <asm/mmu.h>
+#include <asm/global_data.h>
+#include <pci.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+
+static struct pci_controller pci_hose;
+
+
+/**************************************************************************
+ * pci_init_board()
+ *
+ */
+void
+pci_init_board(void)
+{
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile law512x_t *pci_law;
+ volatile pot512x_t *pci_pot;
+ volatile pcictrl512x_t *pci_ctrl;
+ volatile pciconf512x_t *pci_conf;
+ u16 reg16;
+ u32 reg32;
+ u32 dev;
+ struct pci_controller *hose;
+
+ /* Set PCI divider for 33MHz */
+ reg32 = immr->clk.scfr[0];
+ reg32 &= ~(SCFR1_PCI_DIV_MASK);
+ reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT;
+ immr->clk.scfr[0] = reg32;
+
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = &immr->pci_ctrl;
+ pci_conf = &immr->pci_conf;
+
+ hose = &pci_hose;
+
+ /*
+ * Release PCI RST Output signal
+ */
+ pci_ctrl->gcr = 0;
+ udelay(2000);
+ pci_ctrl->gcr = 1;
+
+ /* We need to wait at least a 1sec based on PCI specs */
+ {
+ int i;
+
+ for (i = 0; i < 1000; i++)
+ udelay(1000);
+ }
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI mem space - prefetch */
+ pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[0].pocmr = POCMR_EN | POCMR_PRE | POCMR_CM_256M;
+
+ /* PCI IO space */
+ pci_pot[1].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[1].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
+
+ /* PCI mmio - non-prefetch mem space */
+ pci_pot[2].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[2].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+
+ /* we need RAM mapped to PCI space for the devices to
+ * access main memory */
+ pci_ctrl[0].pitar1 = 0x0;
+ pci_ctrl[0].pibar1 = 0x0;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
+ PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* PCI memory prefetch space */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEM_BASE,
+ CFG_PCI_MEM_PHYS,
+ CFG_PCI_MEM_SIZE,
+ PCI_REGION_MEM|PCI_REGION_PREFETCH);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI_MMIO_BASE,
+ CFG_PCI_MMIO_PHYS,
+ CFG_PCI_MMIO_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI_IO_BASE,
+ CFG_PCI_IO_PHYS,
+ CFG_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose->regions + 3,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ hose->region_count = 4;
+
+ pci_setup_indirect(hose,
+ (CFG_IMMR + 0x8300),
+ (CFG_IMMR + 0x8304));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+ int nodeoffset;
+ int tmp[2];
+ const char *path;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+ path = fdt_getprop(blob, nodeoffset, "pci", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose.first_busno);
+ tmp[1] = cpu_to_be32(pci_hose.last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
+ }
+}
+#endif /* CONFIG_OF_LIBFDT */
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
index 9346d2c..709d41e 100644
--- a/board/amcc/acadia/memory.c
+++ b/board/amcc/acadia/memory.c
@@ -117,7 +117,9 @@
return (CFG_MBYTES_RAM << 20);
}
+#ifndef CONFIG_NAND_SPL
int testdram(void)
{
return (0);
}
+#endif
diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c
index 3806310..47885bc 100644
--- a/board/mx1fs2/flash.c
+++ b/board/mx1fs2/flash.c
@@ -173,7 +173,7 @@
int i;
uchar *boottype;
uchar *bootletter;
- uchar *fmt;
+ char *fmt;
uchar botbootletter[] = "B";
uchar topbootletter[] = "T";
uchar botboottype[] = "bottom boot sector";
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
index 1c026f0..90a33c2 100644
--- a/board/mx1fs2/mx1fs2.c
+++ b/board/mx1fs2/mx1fs2.c
@@ -48,7 +48,7 @@
imx_gpio_mode(PD14_PF_FLM_VSYNC);
imx_gpio_mode(PD13_PF_LP_HSYNC);
imx_gpio_mode(PD6_PF_LSCLK);
- imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_GPIO);
+ imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_DR);
imx_gpio_mode(PD11_PF_CONTRAST);
imx_gpio_mode(PD10_PF_SPL_SPR);
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index 78656e9..e7334ef 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -230,7 +230,8 @@
volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
+ uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
+ >> MPC8641_PORDEVSR_IO_SEL_SHIFT;
#ifdef CONFIG_PCI1
{
@@ -238,7 +239,8 @@
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pci1_hose;
#ifdef DEBUG
- uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
+ uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
+ >> MPC8641_PORBMSR_HA_SHIFT;
uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
#endif
if ((io_sel == 2 || io_sel == 3 || io_sel == 5
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 905a043..33ad2a3 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -43,6 +43,10 @@
#include "mt48lc16m16a2-75.h"
#endif
+#ifdef CONFIG_OF_LIBFDT
+#include <fdt_support.h>
+#endif /* CONFIG_OF_LIBFDT */
+
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_PS2MULT
@@ -155,10 +159,13 @@
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001c; /* 512MB */
/* find RAM size using SDRAM CS1 only */
- sdram_start(0);
- test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
- sdram_start(1);
- test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+ if (!dramsize)
+ sdram_start(0);
+ test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+ if (!dramsize) {
+ sdram_start(1);
+ test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+ }
if (test1 > test2) {
sdram_start(0);
dramsize2 = test1;
@@ -792,5 +799,6 @@
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c
index 99e3495..cfaffb5 100644
--- a/cpu/mpc512x/speed.c
+++ b/cpu/mpc512x/speed.c
@@ -67,12 +67,14 @@
u8 cpmf;
u8 sys_div;
u8 ips_div;
+ u8 pci_div;
u32 ref_clk = CFG_MPC512X_CLKIN;
u32 spll;
u32 sys_clk;
u32 core_clk;
u32 csb_clk;
u32 ips_clk;
+ u32 pci_clk;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
@@ -95,8 +97,16 @@
/* in case we cannot get a sane IPS divisor, fail gracefully */
ips_clk = 0;
}
+ pci_div = (im->clk.scfr[0] & SCFR1_PCI_DIV_MASK) >> SCFR1_PCI_DIV_SHIFT;
+ if (pci_div != 0) {
+ pci_clk = csb_clk / pci_div;
+ } else {
+ /* in case we cannot get a sane IPS divisor, fail gracefully */
+ pci_clk = 333333;
+ }
gd->ips_clk = ips_clk;
+ gd->pci_clk = pci_clk;
gd->csb_clk = csb_clk;
gd->cpu_clk = core_clk;
gd->bus_clk = csb_clk;
@@ -115,11 +125,12 @@
int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- printf ("Clock configuration:\n");
- printf (" CPU: %4d MHz\n", gd->cpu_clk / 1000000);
- printf (" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
- printf (" IPS Bus: %4d MHz\n", gd->ips_clk / 1000000);
- printf (" DDR: %4d MHz\n", 2 * gd->csb_clk / 1000000);
+ printf("Clock configuration:\n");
+ printf(" CPU: %4d MHz\n", gd->cpu_clk / 1000000);
+ printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
+ printf(" IPS Bus: %4d MHz\n", gd->ips_clk / 1000000);
+ printf(" PCI: %4d MHz\n", gd->pci_clk / 1000000);
+ printf(" DDR: %4d MHz\n", 2 * gd->csb_clk / 1000000);
return 0;
}
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 44659ff..5ef1005 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -487,6 +487,9 @@
#endif
u32 bd_cached;
u32 bd_uncached = 0;
+#ifdef CONFIG_4xx_DCACHE
+ static u32 last_used_ea = 0;
+#endif
EMAC_4XX_HW_PST hw_p = dev->priv;
@@ -850,7 +853,12 @@
#ifdef CONFIG_4xx_DCACHE
flush_dcache_range(bd_cached, bd_cached + MAL_ALLOC_SIZE);
- bd_uncached = bis->bi_memsize;
+ if (!last_used_ea)
+ bd_uncached = bis->bi_memsize;
+ else
+ bd_uncached = last_used_ea + MAL_ALLOC_SIZE;
+
+ last_used_ea = bd_uncached;
program_tlb(bd_cached, bd_uncached, MAL_ALLOC_SIZE,
TLB_WORD2_I_ENABLE);
#else
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h
index 318de22..ec94ba9 100644
--- a/include/asm-arm/arch-imx/imx-regs.h
+++ b/include/asm-arm/arch-imx/imx-regs.h
@@ -6,11 +6,11 @@
*
*/
+#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
+
# ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile u32 *)(x)))
-# define __REG2(x,y) \
- ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
- : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x)))
+# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
# else
# define __REG(x) (x)
# define __REG2(x,y) ((x)+(y))
@@ -87,14 +87,20 @@
/* PLL registers */
#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
+#define CSCR_SPLL_RESTART (1<<22)
+#define CSCR_MPLL_RESTART (1<<21)
+#define CSCR_SYSTEM_SEL (1<<16)
+#define CSCR_BCLK_DIV (0xf<<10)
+#define CSCR_MPU_PRESC (1<<15)
+#define CSCR_SPEN (1<<1)
+#define CSCR_MPEN (1<<0)
+
#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-#define CSCR_MPLL_RESTART (1<<21)
-
/*
* GPIO Module and I/O Multiplexer
* x = 0..3 for reg_A, reg_B, reg_C, reg_D
@@ -117,9 +123,12 @@
#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
+#define GPIO_PORT_MAX 3
+
#define GPIO_PIN_MASK 0x1f
#define GPIO_PORT_MASK (0x3 << 5)
+#define GPIO_PORT_SHIFT 5
#define GPIO_PORTA (0<<5)
#define GPIO_PORTB (1<<5)
#define GPIO_PORTC (2<<5)
@@ -132,24 +141,37 @@
#define GPIO_PF (0<<9)
#define GPIO_AF (1<<9)
+#define GPIO_OCR_SHIFT 10
#define GPIO_OCR_MASK (3<<10)
#define GPIO_AIN (0<<10)
#define GPIO_BIN (1<<10)
#define GPIO_CIN (2<<10)
-#define GPIO_GPIO (3<<10)
+#define GPIO_DR (3<<10)
-#define GPIO_AOUT (1<<12)
-#define GPIO_BOUT (1<<13)
+#define GPIO_AOUT_SHIFT 12
+#define GPIO_AOUT_MASK (3<<12)
+#define GPIO_AOUT (0<<12)
+#define GPIO_AOUT_ISR (1<<12)
+#define GPIO_AOUT_0 (2<<12)
+#define GPIO_AOUT_1 (3<<12)
+
+#define GPIO_BOUT_SHIFT 14
+#define GPIO_BOUT_MASK (3<<14)
+#define GPIO_BOUT (0<<14)
+#define GPIO_BOUT_ISR (1<<14)
+#define GPIO_BOUT_0 (2<<14)
+#define GPIO_BOUT_1 (3<<14)
+
+#define GPIO_GIUS (1<<16)
/* assignements for GPIO alternate/primary functions */
/* FIXME: This list is not completed. The correct directions are
* missing on some (many) pins
*/
-#define PA0_PF_A24 ( GPIO_PORTA | GPIO_PF | 0 )
-#define PA0_AIN_SPI2_CLK ( GPIO_PORTA | GPIO_OUT | GPIO_AIN | 0 )
+#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD ( GPIO_PORTA | GPIO_IN | GPIO_AOUT | 1 )
+#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
@@ -167,7 +189,7 @@
#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS ( GPIO_PORTA | GPIO_AIN | 17 )
+#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
@@ -196,11 +218,11 @@
#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 11 )
+#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 )
#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | GPIO_OUT | 12 )
+#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 )
#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_OUT | GPIO_PUEN | 13 )
+#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
@@ -235,19 +257,27 @@
#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
+#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
+#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
+#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
+#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
+#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
+#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
+#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
+#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK ( GPIO_PORTD | GPIO_AIN | 7 )
+#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS ( GPIO_PORTD | GPIO_AIN | 8 )
+#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD ( GPIO_PORTD | GPIO_IN | GPIO_AOUT | 9 )
+#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD ( GPIO_PORTD | GPIO_OUT | GPIO_AIN | 10 )
+#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
@@ -269,7 +299,31 @@
#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 )
+#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
+
+/*
+ * PWM controller
+ */
+#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */
+#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */
+#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */
+#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */
+
+#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */
+#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */
+#define PWMC_SWR (0x01<<16) /* Software Reset */
+#define PWMC_CLKSRC (0x01<<15) /* Clock Source */
+#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */
+#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */
+#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */
+#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */
+#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */
+#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
+#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */
+
+#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
+#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
+#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
/*
* DMA Controller
@@ -291,7 +345,7 @@
#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
-#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
+#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
@@ -401,8 +455,11 @@
#define POS_POS(x) ((x) & 1f)
#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28)
-#define LSCR1_GRAY1(x) (((x) & 0xf) << 4)
-#define LSCR1_GRAY2(x) ((x) & 0xf)
+#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x) (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x) (((x) & 0xf))
#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C)
#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
@@ -478,9 +535,9 @@
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#define UCR1_DOZE (1<<1) /* Doze */
#define UCR1_UARTEN (1<<0) /* UART enabled */
-#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
-#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
-#define UCR2_CTSC (1<<13) /* CTS pin control */
+#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
+#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
+#define UCR2_CTSC (1<<13) /* CTS pin control */
#define UCR2_CTS (1<<12) /* Clear to send */
#define UCR2_ESCEN (1<<11) /* Escape enable */
#define UCR2_PREN (1<<8) /* Parity enable */
@@ -490,8 +547,8 @@
#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
#define UCR2_TXEN (1<<2) /* Transmitter enabled */
#define UCR2_RXEN (1<<1) /* Receiver enabled */
-#define UCR2_SRST (1<<0) /* SW reset */
-#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
+#define UCR2_SRST (1<<0) /* SW reset */
+#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
#define UCR3_PARERREN (1<<12) /* Parity enable */
#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
#define UCR3_DSR (1<<10) /* Data set ready */
@@ -501,51 +558,51 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
-#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
-#define UCR3_BPEN (1<<0) /* Preset registers enable */
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
+#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
-#define UCR4_INVR (1<<9) /* Inverted infrared reception */
-#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
-#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
-#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
-#define UCR4_IRSC (1<<5) /* IR special case */
-#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
-#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
-#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
-#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
+#define UCR4_INVR (1<<9) /* Inverted infrared reception */
+#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
+#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
+#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
+#define UCR4_IRSC (1<<5) /* IR special case */
+#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
+#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
+#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
+#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
-#define USR1_RTSS (1<<14) /* RTS pin status */
-#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
-#define USR1_RTSD (1<<12) /* RTS delta */
-#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
+#define USR1_RTSS (1<<14) /* RTS pin status */
+#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
+#define USR1_RTSD (1<<12) /* RTS delta */
+#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
-#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
+#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
-#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
-#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
-#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
-#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
-#define USR2_IDLE (1<<12) /* Idle condition */
-#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
-#define USR2_WAKE (1<<7) /* Wake */
-#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
-#define USR2_TXDC (1<<3) /* Transmitter complete */
-#define USR2_BRCD (1<<2) /* Break condition */
+#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
+#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
+#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
+#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
+#define USR2_IDLE (1<<12) /* Idle condition */
+#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
+#define USR2_WAKE (1<<7) /* Wake */
+#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
+#define USR2_TXDC (1<<3) /* Transmitter complete */
+#define USR2_BRCD (1<<2) /* Break condition */
#define USR2_ORE (1<<1) /* Overrun error */
#define USR2_RDR (1<<0) /* Recv data ready */
#define UTS_FRCPERR (1<<13) /* Force parity error */
#define UTS_LOOP (1<<12) /* Loop tx and rx */
#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
-#define UTS_TXFULL (1<<4) /* TxFIFO full */
-#define UTS_RXFULL (1<<3) /* RxFIFO full */
+#define UTS_TXFULL (1<<4) /* TxFIFO full */
+#define UTS_RXFULL (1<<3) /* RxFIFO full */
#define UTS_SOFTRST (1<<0) /* Software reset */
/* General purpose timers registers */
diff --git a/include/asm-i386/types.h b/include/asm-i386/types.h
index 69f8a5a..bdbde41 100644
--- a/include/asm-i386/types.h
+++ b/include/asm-i386/types.h
@@ -17,9 +17,9 @@
typedef __signed__ int __s32;
typedef unsigned int __u32;
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
+#if defined(__GNUC__)
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
#endif
/*
diff --git a/include/asm-microblaze/types.h b/include/asm-microblaze/types.h
index 8c4bef2..3895dc4 100644
--- a/include/asm-microblaze/types.h
+++ b/include/asm-microblaze/types.h
@@ -25,9 +25,9 @@
typedef __signed__ int __s32;
typedef unsigned int __u32;
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
+#if defined(__GNUC__)
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
#endif
/*
diff --git a/include/asm-nios/types.h b/include/asm-nios/types.h
index 43fd8f6..24c98a8 100644
--- a/include/asm-nios/types.h
+++ b/include/asm-nios/types.h
@@ -25,9 +25,9 @@
typedef __signed__ int __s32;
typedef unsigned int __u32;
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
+#if defined(__GNUC__)
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
#endif
/*
diff --git a/include/asm-nios2/types.h b/include/asm-nios2/types.h
index 39e2641..f13d8bd 100644
--- a/include/asm-nios2/types.h
+++ b/include/asm-nios2/types.h
@@ -25,9 +25,9 @@
typedef __signed__ int __s32;
typedef unsigned int __u32;
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
+#if defined(__GNUC__)
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
#endif
/*
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index f9a3d92..205f7ed 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -103,6 +103,7 @@
#if defined(CONFIG_MPC512X)
u32 ips_clk;
u32 csb_clk;
+ u32 pci_clk;
#endif /* CONFIG_MPC512X */
#if defined(CONFIG_MPC8220)
unsigned long bExtUart;
diff --git a/include/asm-ppc/immap_512x.h b/include/asm-ppc/immap_512x.h
index 23d10d4..cd90945 100644
--- a/include/asm-ppc/immap_512x.h
+++ b/include/asm-ppc/immap_512x.h
@@ -29,7 +29,7 @@
typedef struct law512x {
u32 bar; /* Base Addr Register */
u32 ar; /* Attributes Register */
-} law521x_t;
+} law512x_t;
/*
* System configuration registers
@@ -47,9 +47,9 @@
u32 lpcs6aw; /* LP CS6 Access Window */
u32 lpcs7aw; /* LP CS7 Access Window */
u8 res1[0x1c];
- law521x_t pcilaw[3]; /* PCI Local Access Window 0-2 Registers */
+ law512x_t pcilaw[3]; /* PCI Local Access Window 0-2 Registers */
u8 res2[0x28];
- law521x_t ddrlaw; /* DDR Local Access Window */
+ law512x_t ddrlaw; /* DDR Local Access Window */
u8 res3[0x18];
u32 mbxbar; /* MBX Base Address */
u32 srambar; /* SRAM Base Address */
@@ -241,21 +241,70 @@
* PCI Software Configuration Registers
*/
typedef struct pciconf512x {
- u8 fixme[0x80];
+ u32 config_address;
+ u32 config_data;
+ u32 int_ack;
+ u8 res[116];
} pciconf512x_t;
/*
+ * PCI Outbound Translation Register
+ */
+typedef struct pci_outbound_window {
+ u32 potar;
+ u8 res0[4];
+ u32 pobar;
+ u8 res1[4];
+ u32 pocmr;
+ u8 res2[4];
+} pot512x_t;
+
+/*
* Sequencer
*/
typedef struct ios512x {
- u8 fixme[0x100];
+ pot512x_t pot[6];
+ u8 res0[0x60];
+ u32 pmcr;
+ u8 res1[4];
+ u32 dtcr;
+ u8 res2[4];
} ios512x_t;
/*
* PCI Controller
*/
typedef struct pcictrl512x {
- u8 fixme[0x100];
+ u32 esr;
+ u32 ecdr;
+ u32 eer;
+ u32 eatcr;
+ u32 eacr;
+ u32 eeacr;
+ u32 edlcr;
+ u32 edhcr;
+ u32 gcr;
+ u32 ecr;
+ u32 gsr;
+ u8 res0[12];
+ u32 pitar2;
+ u8 res1[4];
+ u32 pibar2;
+ u32 piebar2;
+ u32 piwar2;
+ u8 res2[4];
+ u32 pitar1;
+ u8 res3[4];
+ u32 pibar1;
+ u32 piebar1;
+ u32 piwar1;
+ u8 res4[4];
+ u32 pitar0;
+ u8 res5[4];
+ u32 pibar0;
+ u8 res6[4];
+ u32 piwar0;
+ u8 res7[132];
} pcictrl512x_t;
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index 09c3140..65dc97e 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -34,6 +34,9 @@
* 0x3000_0000 - 0x3001_FFFF SRAM (128 KB)
* 0x8000_0000 - 0x803F_FFFF IMMR (4 MB)
* 0x8200_0000 - 0x8200_001F CPLD (32 B)
+ * 0x8400_0000 - 0x82FF_FFFF PCI I/O space (16 MB)
+ * 0xA000_0000 - 0xAFFF_FFFF PCI memory space (256 MB)
+ * 0xB000_0000 - 0xBFFF_FFFF PCI memory mapped I/O space (256 MB)
* 0xFC00_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB)
*/
@@ -43,7 +46,7 @@
#define CONFIG_E300 1 /* E300 Family */
#define CONFIG_MPC512X 1 /* MPC512X family */
-#undef CONFIG_PCI
+/* CONFIG_PCI is defined at config time */
#define CFG_MPC512X_CLKIN 66000000 /* in Hz */
@@ -217,6 +220,31 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/*
+ * PCI
+ */
+#ifdef CONFIG_PCI
+
+/*
+ * General PCI
+ */
+#define CFG_PCI_MEM_BASE 0xA0000000
+#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE (CFG_PCI_MEM_BASE + CFG_PCI_MEM_SIZE)
+#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE 0x00000000
+#define CFG_PCI_IO_PHYS 0x84000000
+#define CFG_PCI_IO_SIZE 0x01000000 /* 16M */
+
+
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#endif
+
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */
diff --git a/include/mpc512x.h b/include/mpc512x.h
index b51cf78..b4cc2b9 100644
--- a/include/mpc512x.h
+++ b/include/mpc512x.h
@@ -46,6 +46,7 @@
#define LPCS6AW 0x003C
#define LPCA7AW 0x0040
#define SRAMBAR 0x00C4
+#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */
#define LPC_OFFSET 0x10000
@@ -189,6 +190,10 @@
#define SCFR1_IPS_DIV_MASK 0x03800000
#define SCFR1_IPS_DIV_SHIFT 23
+#define SCFR1_PCI_DIV 0x6
+#define SCFR1_PCI_DIV_MASK 0x00700000
+#define SCFR1_PCI_DIV_SHIFT 20
+
/* SCFR2 System Clock Frequency Register 2
*/
#define SCFR2_SYS_DIV 0xFC000000
@@ -404,4 +409,83 @@
#define I2C_IF 0x02
#define I2C_RXAK 0x01
+/* POTAR - PCI Outbound Translation Address Register
+ */
+#define POTAR_TA_MASK 0x000fffff
+
+/* POBAR - PCI Outbound Base Address Register
+ */
+#define POBAR_BA_MASK 0x000fffff
+
+/* POCMR - PCI Outbound Comparision Mask Register
+ */
+#define POCMR_EN 0x80000000
+#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */
+#define POCMR_PRE 0x20000000 /* prefetch enable */
+#define POCMR_SBS 0x00100000 /* special byte swap enable */
+#define POCMR_CM_MASK 0x000fffff
+#define POCMR_CM_4G 0x00000000
+#define POCMR_CM_2G 0x00080000
+#define POCMR_CM_1G 0x000C0000
+#define POCMR_CM_512M 0x000E0000
+#define POCMR_CM_256M 0x000F0000
+#define POCMR_CM_128M 0x000F8000
+#define POCMR_CM_64M 0x000FC000
+#define POCMR_CM_32M 0x000FE000
+#define POCMR_CM_16M 0x000FF000
+#define POCMR_CM_8M 0x000FF800
+#define POCMR_CM_4M 0x000FFC00
+#define POCMR_CM_2M 0x000FFE00
+#define POCMR_CM_1M 0x000FFF00
+#define POCMR_CM_512K 0x000FFF80
+#define POCMR_CM_256K 0x000FFFC0
+#define POCMR_CM_128K 0x000FFFE0
+#define POCMR_CM_64K 0x000FFFF0
+#define POCMR_CM_32K 0x000FFFF8
+#define POCMR_CM_16K 0x000FFFFC
+#define POCMR_CM_8K 0x000FFFFE
+#define POCMR_CM_4K 0x000FFFFF
+
+/* PITAR - PCI Inbound Translation Address Register
+ */
+#define PITAR_TA_MASK 0x000fffff
+
+/* PIBAR - PCI Inbound Base/Extended Address Register
+ */
+#define PIBAR_MASK 0xffffffff
+#define PIEBAR_EBA_MASK 0x000fffff
+
+/* PIWAR - PCI Inbound Windows Attributes Register
+ */
+#define PIWAR_EN 0x80000000
+#define PIWAR_SBS 0x40000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_RTT_MASK 0x000f0000
+#define PIWAR_RTT_NO_SNOOP 0x00040000
+#define PIWAR_RTT_SNOOP 0x00050000
+#define PIWAR_WTT_MASK 0x0000f000
+#define PIWAR_WTT_NO_SNOOP 0x00004000
+#define PIWAR_WTT_SNOOP 0x00005000
+#define PIWAR_IWS_MASK 0x0000003F
+#define PIWAR_IWS_4K 0x0000000B
+#define PIWAR_IWS_8K 0x0000000C
+#define PIWAR_IWS_16K 0x0000000D
+#define PIWAR_IWS_32K 0x0000000E
+#define PIWAR_IWS_64K 0x0000000F
+#define PIWAR_IWS_128K 0x00000010
+#define PIWAR_IWS_256K 0x00000011
+#define PIWAR_IWS_512K 0x00000012
+#define PIWAR_IWS_1M 0x00000013
+#define PIWAR_IWS_2M 0x00000014
+#define PIWAR_IWS_4M 0x00000015
+#define PIWAR_IWS_8M 0x00000016
+#define PIWAR_IWS_16M 0x00000017
+#define PIWAR_IWS_32M 0x00000018
+#define PIWAR_IWS_64M 0x00000019
+#define PIWAR_IWS_128M 0x0000001A
+#define PIWAR_IWS_256M 0x0000001B
+#define PIWAR_IWS_512M 0x0000001C
+#define PIWAR_IWS_1G 0x0000001D
+#define PIWAR_IWS_2G 0x0000001E
+
#endif /* __MPC512X_H__ */
diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c
index c12e378..37c9559 100644
--- a/post/cpu/ppc4xx/spr.c
+++ b/post/cpu/ppc4xx/spr.c
@@ -43,6 +43,12 @@
#include <asm/processor.h>
+#ifdef CONFIG_4xx_DCACHE
+#include <asm/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
static struct {
int number;
char * name;
@@ -164,6 +170,10 @@
};
unsigned long (*get_spr) (void) = (void *) code;
+#ifdef CONFIG_4xx_DCACHE
+ /* disable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
+#endif
for (i = 0; i < spr_test_list_size; i++) {
int num = spr_test_list[i].number;
@@ -180,6 +190,10 @@
ret = -1;
}
}
+#ifdef CONFIG_4xx_DCACHE
+ /* enable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
return ret;
}
diff --git a/post/drivers/memory.c b/post/drivers/memory.c
index fbc349a..fb96985 100644
--- a/post/drivers/memory.c
+++ b/post/drivers/memory.c
@@ -186,7 +186,7 @@
*
* For other processors, let the compiler generate the best code it can.
*/
-static void move64(unsigned long long *src, unsigned long long *dest)
+static void move64(const unsigned long long *src, unsigned long long *dest)
{
#if defined(CONFIG_MPC8260) || defined(CONFIG_MPC824X)
asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
@@ -233,12 +233,12 @@
int ret = 0;
for ( i = 0; i < num_patterns; i++) {
- move64((unsigned long long *)&(pattern[i]), pmem++);
+ move64(&(pattern[i]), pmem++);
/*
* Put a different pattern on the data lines: otherwise they
* may float long enough to read back what we wrote.
*/
- move64((unsigned long long *)&otherpattern, pmem--);
+ move64(&otherpattern, pmem--);
move64(pmem, &temp64);
#ifdef INJECT_DATA_ERRORS