net: sun8i_emac: Fix overlong lines
When iterating over all RX/TX buffers, we were using a rather long "idx"
control variable, which lead to a nasty overlong line.
Replace "idx" with "i" to avoid this.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Amit Singh Tomar <amittomer25@gmail.com> # Pine64+
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index c005b98..1ae5bfd 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -389,7 +389,7 @@
struct emac_dma_desc *desc_table_p = &priv->rx_chain[0];
char *rxbuffs = &priv->rxbuffer[0];
struct emac_dma_desc *desc_p;
- u32 idx;
+ int i;
/*
* Make sure we don't have dirty cache lines around, which could
@@ -400,11 +400,10 @@
invalidate_dcache_range((uintptr_t)rxbuffs,
(uintptr_t)rxbuffs + sizeof(priv->rxbuffer));
- for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
- desc_p = &desc_table_p[idx];
- desc_p->buf_addr = (uintptr_t)&rxbuffs[idx * CONFIG_ETH_BUFSIZE]
- ;
- desc_p->next = (uintptr_t)&desc_table_p[idx + 1];
+ for (i = 0; i < CONFIG_RX_DESCR_NUM; i++) {
+ desc_p = &desc_table_p[i];
+ desc_p->buf_addr = (uintptr_t)&rxbuffs[i * CONFIG_ETH_BUFSIZE];
+ desc_p->next = (uintptr_t)&desc_table_p[i + 1];
desc_p->ctl_size = CONFIG_ETH_RXSIZE;
desc_p->status = EMAC_DESC_OWN_DMA;
}
@@ -425,13 +424,12 @@
struct emac_dma_desc *desc_table_p = &priv->tx_chain[0];
char *txbuffs = &priv->txbuffer[0];
struct emac_dma_desc *desc_p;
- u32 idx;
+ int i;
- for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
- desc_p = &desc_table_p[idx];
- desc_p->buf_addr = (uintptr_t)&txbuffs[idx * CONFIG_ETH_BUFSIZE]
- ;
- desc_p->next = (uintptr_t)&desc_table_p[idx + 1];
+ for (i = 0; i < CONFIG_TX_DESCR_NUM; i++) {
+ desc_p = &desc_table_p[i];
+ desc_p->buf_addr = (uintptr_t)&txbuffs[i * CONFIG_ETH_BUFSIZE];
+ desc_p->next = (uintptr_t)&desc_table_p[i + 1];
desc_p->ctl_size = 0;
desc_p->status = 0;
}