arm: mvebu: Add SPI driver model support
This patch enables the DM support for the SPI driver and the
SPI NOR flash chips. Some MVEBU boards boot from SPI NOR, so
adding the aliases and enabling CONFIG_DM_SEQ_ALIAS is needed
here.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b886d01..68ae6b6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -118,8 +118,11 @@
select OF_SEPARATE
select DM
select DM_SERIAL
+ select DM_SPI
+ select DM_SPI_FLASH
select SPL_DM
select SPL_OF_CONTROL
+ select SPL_SIMPLE_BUS
config TARGET_DEVKIT3250
bool "Support devkit3250"
diff --git a/arch/arm/dts/armada-388-gp.dts b/arch/arm/dts/armada-388-gp.dts
index f576e93..f3bcbc6 100644
--- a/arch/arm/dts/armada-388-gp.dts
+++ b/arch/arm/dts/armada-388-gp.dts
@@ -51,6 +51,10 @@
stdout-path = "serial0:115200n8";
};
+ aliases {
+ spi0 = &spi0;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x80000000>; /* 2 GB */
@@ -65,8 +69,10 @@
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
status = "okay";
+ u-boot,dm-pre-reloc;
spi-flash@0 {
+ u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/dts/armada-38x.dtsi b/arch/arm/dts/armada-38x.dtsi
index 04ecfe6..dc8a1a6 100644
--- a/arch/arm/dts/armada-38x.dtsi
+++ b/arch/arm/dts/armada-38x.dtsi
@@ -70,6 +70,7 @@
soc {
compatible = "marvell,armada380-mbus", "simple-bus";
+ u-boot,dm-pre-reloc;
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
@@ -134,6 +135,7 @@
internal-regs {
compatible = "simple-bus";
+ u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
diff --git a/arch/arm/dts/armada-xp-gp.dts b/arch/arm/dts/armada-xp-gp.dts
index ca5f8bb..27799d1 100644
--- a/arch/arm/dts/armada-xp-gp.dts
+++ b/arch/arm/dts/armada-xp-gp.dts
@@ -68,6 +68,10 @@
stdout-path = "serial0:115200n8";
};
+ aliases {
+ spi0 = &spi0;
+ };
+
memory {
device_type = "memory";
/*
@@ -224,8 +228,10 @@
spi0: spi@10600 {
status = "okay";
+ u-boot,dm-pre-reloc;
spi-flash@0 {
+ u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/dts/armada-xp.dtsi b/arch/arm/dts/armada-xp.dtsi
index 3de9b76..3fac39e 100644
--- a/arch/arm/dts/armada-xp.dtsi
+++ b/arch/arm/dts/armada-xp.dtsi
@@ -63,6 +63,7 @@
soc {
compatible = "marvell,armadaxp-mbus", "simple-bus";
+ u-boot,dm-pre-reloc;
bootrom {
compatible = "marvell,bootrom";
diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h
index 3d18827..74a1ff6 100644
--- a/arch/arm/mach-mvebu/include/mach/config.h
+++ b/arch/arm/mach-mvebu/include/mach/config.h
@@ -47,8 +47,7 @@
* SPI Flash configuration
*/
#ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI 1
-#define CONFIG_KIRKWOOD_SPI 1
+#define CONFIG_KIRKWOOD_SPI
#ifndef CONFIG_ENV_SPI_BUS
# define CONFIG_ENV_SPI_BUS 0
#endif
@@ -60,6 +59,9 @@
#endif
#endif
+/* Needed for SPI NOR booting in SPL */
+#define CONFIG_DM_SEQ_ALIAS 1
+
/*
* Ethernet Driver configuration
*/
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index 800f5d5..3cdb1f2 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -47,7 +47,6 @@
#define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504))
#define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000))
#define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE
-#define MVEBU_SPI_BASE (MVEBU_REGISTER(0x10600))
#define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000))
#define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000))
#define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100))