configs: define CONFIG_SPL_SIZE_LIMIT
A new configuration variable CONFIG_SPL_SIZE_LIMIT is introduced to define
the board specific maximum size for the SPL file.
Use Makefile function size_check() to implement the test.
Depending on the size of CONFIG_SPL_SIZE_LIMIT an error like the following
is thrown:
spl/u-boot-spl.bin exceeds file size limit:
limit: 30720 bytes
actual: 33426 bytes
excess: 2706 bytes
make: *** [Makefile:1663: spl/u-boot-spl.bin] Error 1
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
diff --git a/Kconfig b/Kconfig
index a021686..709912e 100644
--- a/Kconfig
+++ b/Kconfig
@@ -173,6 +173,14 @@
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
+config SPL_SIZE_LIMIT
+ int "Maximum size of SPL image"
+ depends on SPL
+ default 0
+ help
+ Specifies the maximum length of the U-Boot SPL image.
+ If this value is zero, it is ignored.
+
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y
diff --git a/Makefile b/Makefile
index af2ab4e..da8a38d 100644
--- a/Makefile
+++ b/Makefile
@@ -796,6 +796,12 @@
BOARD_SIZE_CHECK =
endif
+ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
+SPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_SPL_SIZE_LIMIT))
+else
+SPL_SIZE_CHECK =
+endif
+
# Statically apply RELA-style relocations (currently arm64 only)
# This is useful for arm64 where static relocation needs to be performed on
# the raw binary, but certain simulators only accept an ELF file (but don't
@@ -1712,6 +1718,8 @@
spl/u-boot-spl.bin: spl/u-boot-spl
@:
+ $(SPL_SIZE_CHECK)
+
spl/u-boot-spl: tools prepare \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)