x86: link: Add pin configuration to the device tree
At present pin configuration on link does not use the standard mechanism,
but some rather ugly custom code. As a first step to resolving this, add the
pin configuration to the device tree.
Four of the GPIOs must be available before relocation (for SDRAM pin
strapping).
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/dts/chromebook_link.dts b/arch/x86/dts/chromebook_link.dts
index a702ea9..a424f6b 100644
--- a/arch/x86/dts/chromebook_link.dts
+++ b/arch/x86/dts/chromebook_link.dts
@@ -1,5 +1,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/x86-gpio.h>
+
/include/ "skeleton.dtsi"
/include/ "keyboard.dtsi"
/include/ "serial.dtsi"
@@ -62,6 +64,159 @@
intel,duplicate-por;
};
+ pch_pinctrl {
+ compatible = "intel,x86-pinctrl";
+ u-boot,dm-pre-reloc;
+ reg = <0 0>;
+
+ gpio_a0 {
+ gpio-offset = <0 0>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_a1 {
+ gpio-offset = <0>;
+ mode-gpio;
+ direction = <PIN_OUTPUT>;
+ output-value = <1>;
+ };
+
+ gpio_a3 {
+ gpio-offset = <0 3>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_a5 {
+ gpio-offset = <0 5>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_a6 {
+ gpio-offset = <0 6>;
+ mode-gpio;
+ direction = <PIN_OUTPUT>;
+ output-value = <1>;
+ };
+
+ gpio_a7 {
+ gpio-offset = <0 7>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ invert;
+ };
+
+ gpio_a8 {
+ gpio-offset = <0 8>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ invert;
+ };
+
+ gpio_a9 {
+ gpio-offset = <0 9>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_a10 {
+ u-boot,dm-pre-reloc;
+ gpio-offset = <0 10>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_a11 {
+ gpio-offset = <0 11>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_a12 {
+ gpio-offset = <0 12>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ invert;
+ };
+
+ gpio_a14 {
+ gpio-offset = <0 14>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ invert;
+ };
+
+ gpio_a15 {
+ gpio-offset = <0 15>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ invert;
+ };
+
+ gpio_a21 {
+ gpio-offset = <0 21>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_a24 {
+ gpio-offset = <0 24>;
+ mode-gpio;
+ output-value = <0>;
+ direction = <PIN_OUTPUT>;
+ };
+
+ gpio_a28 {
+ gpio-offset = <0 28>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_b4 {
+ gpio-offset = <0x30 4>;
+ mode-gpio;
+ direction = <PIN_OUTPUT>;
+ output-value = <1>;
+ };
+
+ gpio_b9 {
+ u-boot,dm-pre-reloc;
+ gpio-offset = <0x30 9>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_b10 {
+ u-boot,dm-pre-reloc;
+ gpio-offset = <0x30 10>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_b11 {
+ u-boot,dm-pre-reloc;
+ gpio-offset = <0x30 11>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_b25 {
+ gpio-offset = <0x30 25>;
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ };
+
+ gpio_b28 {
+ gpio-offset = <0x30 28>;
+ mode-gpio;
+ direction = <PIN_OUTPUT>;
+ output-value = <1>;
+ };
+
+ };
+
pci {
compatible = "pci-x86";
#address-cells = <3>;