ARM: DRA72x: fix io delay calibration for ethernet
we currently use in-development IODelay values for DRA72x which are
proposed in the data sheet, however, DRA72x EVM uses DP83865 ethernet
Phy over RGMII. The PHY characteristics and routing choices made on
the EVM, make the current iodelay values fail ethernet communication.
Instead, we need to choose custom values for DRA72x-evm specifically
designed for the PHY and routing on the platform for ethernet to
function.
Cc: Nishanth Menon <nm@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index c9301a5..5145301 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -156,30 +156,31 @@
#ifdef CONFIG_IODELAY_RECALIBRATION
const struct iodelay_cfg_entry iodelay_cfg_array[] = {
- {0x6F0, 480, 0}, /* RGMMI0_RXC_IN */
- {0x6FC, 111, 1641}, /* RGMMI0_RXCTL_IN */
- {0x708, 272, 1116}, /* RGMMI0_RXD0_IN */
- {0x714, 243, 1260}, /* RGMMI0_RXD1_IN */
- {0x720, 0, 1614}, /* RGMMI0_RXD2_IN */
- {0x72C, 105, 1673}, /* RGMMI0_RXD3_IN */
- {0x740, 531, 120}, /* RGMMI0_TXC_OUT */
- {0x74C, 11, 60}, /* RGMMI0_TXCTL_OUT */
- {0x758, 7, 120}, /* RGMMI0_TXD0_OUT */
- {0x764, 0, 0}, /* RGMMI0_TXD1_OUT */
- {0x770, 276, 120}, /* RGMMI0_TXD2_OUT */
- {0x77C, 440, 120}, /* RGMMI0_TXD3_OUT */
- {0xAB0, 702, 0}, /* CFG_VIN2A_D18_IN */
- {0xABC, 136, 976}, /* CFG_VIN2A_D19_IN */
- {0xAD4, 210, 1357}, /* CFG_VIN2A_D20_IN */
- {0xAE0, 189, 1462}, /* CFG_VIN2A_D21_IN */
- {0xAEC, 232, 1278}, /* CFG_VIN2A_D22_IN */
- {0xAF8, 0, 1397}, /* CFG_VIN2A_D23_IN */
- {0xA70, 1551, 115}, /* CFG_VIN2A_D12_OUT */
- {0xA7C, 816, 0}, /* CFG_VIN2A_D13_OUT */
- {0xA88, 876, 0}, /* CFG_VIN2A_D14_OUT */
- {0xA94, 312, 0}, /* CFG_VIN2A_D15_OUT */
- {0xAA0, 58, 0}, /* CFG_VIN2A_D16_OUT */
- {0xAAC, 0, 0}, /* CFG_VIN2A_D17_OUT */
+ {0x6F0, 359, 0}, /* RGMMI0_RXC_IN */
+ {0x6FC, 129, 1896}, /* RGMMI0_RXCTL_IN */
+ {0x708, 80, 1391}, /* RGMMI0_RXD0_IN */
+ {0x714, 196, 1522}, /* RGMMI0_RXD1_IN */
+ {0x720, 40, 1860}, /* RGMMI0_RXD2_IN */
+ {0x72C, 0, 1956}, /* RGMMI0_RXD3_IN */
+ {0x740, 0, 220}, /* RGMMI0_TXC_OUT */
+ {0x74C, 1820, 180}, /* RGMMI0_TXCTL_OUT */
+ {0x758, 1740, 440}, /* RGMMI0_TXD0_OUT */
+ {0x764, 1740, 240}, /* RGMMI0_TXD1_OUT */
+ {0x770, 1680, 380}, /* RGMMI0_TXD2_OUT */
+ {0x77C, 1740, 440}, /* RGMMI0_TXD3_OUT */
+ /* These values are for using RGMII1 configuration on VIN2a_x pins. */
+ {0xAB0, 596, 0}, /* CFG_VIN2A_D18_IN */
+ {0xABC, 314, 980}, /* CFG_VIN2A_D19_IN */
+ {0xAD4, 241, 1536}, /* CFG_VIN2A_D20_IN */
+ {0xAE0, 103, 1689}, /* CFG_VIN2A_D21_IN */
+ {0xAEC, 161, 1563}, /* CFG_VIN2A_D22_IN */
+ {0xAF8, 0, 1613}, /* CFG_VIN2A_D23_IN */
+ {0xA70, 0, 200}, /* CFG_VIN2A_D12_OUT */
+ {0xA7C, 1560, 140}, /* CFG_VIN2A_D13_OUT */
+ {0xA88, 1700, 0}, /* CFG_VIN2A_D14_OUT */
+ {0xA94, 1260, 0}, /* CFG_VIN2A_D15_OUT */
+ {0xAA0, 1400, 0}, /* CFG_VIN2A_D16_OUT */
+ {0xAAC, 1290, 0}, /* CFG_VIN2A_D17_OUT */
};
#endif