Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 84ff7e8..bdfad98 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -305,17 +305,12 @@
{
unsigned int byte_offset = offset * info->portwidth;
- return map_physmem(info->start[sect] + byte_offset,
- flash_sector_size(info, sect) - byte_offset,
- MAP_NOCACHE);
+ return (void *)(info->start[sect] + byte_offset);
}
static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
unsigned int offset, void *addr)
{
- unsigned int byte_offset = offset * info->portwidth;
-
- unmap_physmem(addr, flash_sector_size(info, sect) - byte_offset);
}
/*-----------------------------------------------------------------------
@@ -802,13 +797,11 @@
static int flash_write_cfiword (flash_info_t * info, ulong dest,
cfiword_t cword)
{
- void *dstaddr;
+ void *dstaddr = (void *)dest;
int flag;
flash_sect_t sect = 0;
char sect_found = 0;
- dstaddr = map_physmem(dest, info->portwidth, MAP_NOCACHE);
-
/* Check if Flash is (sufficiently) erased */
switch (info->portwidth) {
case FLASH_CFI_8BIT:
@@ -827,10 +820,8 @@
flag = 0;
break;
}
- if (!flag) {
- unmap_physmem(dstaddr, info->portwidth);
+ if (!flag)
return ERR_NOT_ERASED;
- }
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
@@ -873,8 +864,6 @@
if (flag)
enable_interrupts ();
- unmap_physmem(dstaddr, info->portwidth);
-
if (!sect_found)
sect = find_sector (info, dest);
@@ -890,7 +879,7 @@
int cnt;
int retcode;
void *src = cp;
- void *dst = map_physmem(dest, len, MAP_NOCACHE);
+ void *dst = (void *)dest;
void *dst2 = dst;
int flag = 0;
uint offset = 0;
@@ -1052,7 +1041,6 @@
}
out_unmap:
- unmap_physmem(dst, len);
return retcode;
}
#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
@@ -1301,7 +1289,7 @@
/* handle unaligned start */
if ((aln = addr - wp) != 0) {
cword.l = 0;
- p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
+ p = (uchar *)wp;
for (i = 0; i < aln; ++i)
flash_add_byte (info, &cword, flash_read8(p + i));
@@ -1313,7 +1301,6 @@
flash_add_byte (info, &cword, flash_read8(p + i));
rc = flash_write_cfiword (info, wp, cword);
- unmap_physmem(p, info->portwidth);
if (rc != 0)
return rc;
@@ -1372,14 +1359,13 @@
* handle unaligned tail bytes
*/
cword.l = 0;
- p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
+ p = (uchar *)wp;
for (i = 0; (i < info->portwidth) && (cnt > 0); ++i) {
flash_add_byte (info, &cword, *src++);
--cnt;
}
for (; i < info->portwidth; ++i)
flash_add_byte (info, &cword, flash_read8(p + i));
- unmap_physmem(p, info->portwidth);
return flash_write_cfiword (info, wp, cword);
}
@@ -1618,7 +1604,7 @@
* board_flash_get_legacy needs to fill in at least:
* info->portwidth, info->chipwidth and info->interface for Jedec probing.
*/
-static int flash_detect_legacy(ulong base, int banknum)
+static int flash_detect_legacy(phys_addr_t base, int banknum)
{
flash_info_t *info = &flash_info[banknum];
@@ -1634,7 +1620,10 @@
for (i = 0; i < sizeof(modes) / sizeof(modes[0]); i++) {
info->vendor = modes[i];
- info->start[0] = base;
+ info->start[0] =
+ (ulong)map_physmem(base,
+ info->portwidth,
+ MAP_NOCACHE);
if (info->portwidth == FLASH_CFI_8BIT
&& info->interface == FLASH_CFI_X8X16) {
info->addr_unlock1 = 0x2AAA;
@@ -1648,8 +1637,11 @@
info->manufacturer_id,
info->device_id,
info->device_id2);
- if (jedec_flash_match(info, base))
+ if (jedec_flash_match(info, info->start[0]))
break;
+ else
+ unmap_physmem((void *)info->start[0],
+ MAP_NOCACHE);
}
}
@@ -1671,7 +1663,7 @@
return 0; /* use CFI */
}
#else
-static inline int flash_detect_legacy(ulong base, int banknum)
+static inline int flash_detect_legacy(phys_addr_t base, int banknum)
{
return 0; /* use CFI */
}
@@ -1826,12 +1818,12 @@
* The following code cannot be run from FLASH!
*
*/
-ulong flash_get_size (ulong base, int banknum)
+ulong flash_get_size (phys_addr_t base, int banknum)
{
flash_info_t *info = &flash_info[banknum];
int i, j;
flash_sect_t sect_cnt;
- unsigned long sector;
+ phys_addr_t sector;
unsigned long tmp;
int size_ratio;
uchar num_erase_regions;
@@ -1847,7 +1839,7 @@
info->legacy_unlock = 0;
#endif
- info->start[0] = base;
+ info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE);
if (flash_detect_cfi (info, &qry)) {
info->vendor = le16_to_cpu(qry.p_id);
@@ -1939,7 +1931,10 @@
printf("ERROR: too many flash sectors\n");
break;
}
- info->start[sect_cnt] = sector;
+ info->start[sect_cnt] =
+ (ulong)map_physmem(sector,
+ info->portwidth,
+ MAP_NOCACHE);
sector += (erase_region_size * size_ratio);
/*
@@ -2016,7 +2011,7 @@
char *s = getenv("unlock");
#endif
-#define BANK_BASE(i) (((unsigned long [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
+#define BANK_BASE(i) (((phys_addr_t [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
/* Init: no FLASHes known */
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c
index 2d99d4d..e48acec 100644
--- a/drivers/mtd/jedec_flash.c
+++ b/drivers/mtd/jedec_flash.c
@@ -37,10 +37,6 @@
#define P_ID_AMD_STD CFI_CMDSET_AMD_LEGACY
-/* Manufacturers */
-#define MANUFACTURER_AMD 0x0001
-#define MANUFACTURER_SST 0x00BF
-
/* AMD */
#define AM29DL800BB 0x22CB
#define AM29DL800BT 0x224A
@@ -172,7 +168,7 @@
static const struct amd_flash_info jedec_table[] = {
#ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8
{
- .mfr_id = MANUFACTURER_SST,
+ .mfr_id = (u16)SST_MANUFACT,
.dev_id = SST39LF020,
.name = "SST 39LF020",
.uaddr = {
@@ -188,7 +184,7 @@
#endif
#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8
{
- .mfr_id = MANUFACTURER_AMD,
+ .mfr_id = (u16)AMD_MANUFACT,
.dev_id = AM29LV040B,
.name = "AMD AM29LV040B",
.uaddr = {
@@ -202,7 +198,7 @@
}
},
{
- .mfr_id = MANUFACTURER_SST,
+ .mfr_id = (u16)SST_MANUFACT,
.dev_id = SST39LF040,
.name = "SST 39LF040",
.uaddr = {
@@ -216,7 +212,7 @@
}
},
{
- .mfr_id = STM_MANUFACT,
+ .mfr_id = (u16)STM_MANUFACT,
.dev_id = STM_ID_M29W040B,
.name = "ST Micro M29W040B",
.uaddr = {
@@ -232,7 +228,7 @@
#endif
#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16
{
- .mfr_id = MANUFACTURER_AMD,
+ .mfr_id = (u16)AMD_MANUFACT,
.dev_id = AM29LV400BB,
.name = "AMD AM29LV400BB",
.uaddr = {
@@ -249,7 +245,7 @@
}
},
{
- .mfr_id = MANUFACTURER_AMD,
+ .mfr_id = (u16)AMD_MANUFACT,
.dev_id = AM29LV800BB,
.name = "AMD AM29LV800BB",
.uaddr = {
diff --git a/include/flash.h b/include/flash.h
index 6e2981c..02c6a04 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -33,7 +33,7 @@
ulong size; /* total bank size in bytes */
ushort sector_count; /* number of erase units */
ulong flash_id; /* combined device & manufacturer code */
- ulong start[CONFIG_SYS_MAX_FLASH_SECT]; /* physical sector start addresses */
+ ulong start[CONFIG_SYS_MAX_FLASH_SECT]; /* virtual sector start address */
uchar protect[CONFIG_SYS_MAX_FLASH_SECT]; /* sector protection status */
#ifdef CONFIG_SYS_FLASH_CFI
uchar portwidth; /* the width of the port */