dm: sound: Move common code out of maxim98095
The register-access code is useful for any maxim codec. Move it out into
its own file.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 75fa31e..b088455 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -15,4 +15,4 @@
obj-$(CONFIG_I2S) += sound-i2s.o
endif
obj-$(CONFIG_SOUND_WM8994) += wm8994.o
-obj-$(CONFIG_SOUND_MAX98095) += max98095.o
+obj-$(CONFIG_SOUND_MAX98095) += max98095.o maxim_codec.o
diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c
index d6710df..e9bf64f 100644
--- a/drivers/sound/max98095.c
+++ b/drivers/sound/max98095.c
@@ -25,97 +25,11 @@
#include "i2s.h"
#include "max98095.h"
-struct max98095_priv {
- unsigned int sysclk;
- unsigned int rate;
- unsigned int fmt;
- int i2c_addr;
- struct udevice *dev;
-};
-
/* Index 0 is reserved. */
int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
88200, 96000};
/*
- * Writes value to a device register through i2c
- *
- * @param priv Private data for driver
- * @param reg reg number to be write
- * @param data data to be writen to the above registor
- *
- * @return int value 1 for change, 0 for no change or negative error code.
- */
-static int max98095_i2c_write(struct max98095_priv *priv, unsigned int reg,
- unsigned char data)
-{
- debug("%s: Write Addr : 0x%02X, Data : 0x%02X\n",
- __func__, reg, data);
-#ifdef CONFIG_DM_SOUND
- debug("dev = %s\n", priv->dev->name);
- return dm_i2c_write(priv->dev, reg, &data, 1);
-#else
- return i2c_write(priv->i2c_addr, reg, 1, &data, 1);
-#endif
-}
-
-/*
- * Read a value from a device register through i2c
- *
- * @param priv Private data for driver
- * @param reg reg number to be read
- * @param data address of read data to be stored
- *
- * @return int value 0 for success, -1 in case of error.
- */
-static unsigned int max98095_i2c_read(struct max98095_priv *priv,
- unsigned int reg, unsigned char *data)
-{
- int ret;
-
-#ifdef CONFIG_DM_SOUND
- return dm_i2c_read(priv->dev, reg, data, 1);
-#else
- ret = i2c_read(priv->i2c_addr, reg, 1, data, 1);
-#endif
- if (ret != 0) {
- debug("%s: Error while reading register %#04x\n",
- __func__, reg);
- return -1;
- }
-
- return 0;
-}
-
-/*
- * update device register bits through i2c
- *
- * @param priv Private data for driver
- * @param reg codec register
- * @param mask register mask
- * @param value new value
- *
- * @return int value 0 for success, non-zero error code.
- */
-static int max98095_bic_or(struct max98095_priv *priv, unsigned int reg,
- unsigned char mask, unsigned char value)
-{
- int change, ret = 0;
- unsigned char old, new;
-
- if (max98095_i2c_read(priv, reg, &old) != 0)
- return -1;
- new = (old & ~mask) | (value & mask);
- change = (old != new) ? 1 : 0;
- if (change)
- ret = max98095_i2c_write(priv, reg, new);
- if (ret < 0)
- return ret;
-
- return change;
-}
-
-/*
* codec mclk clock divider coefficients based on sampling rate
*
* @param rate sampling rate
@@ -147,7 +61,7 @@
*
* @return -1 for error and 0 Success.
*/
-static int max98095_hw_params(struct max98095_priv *priv,
+static int max98095_hw_params(struct maxim_priv *priv,
enum en_max_audio_interface aif_id,
unsigned int rate, unsigned int bits_per_sample)
{
@@ -169,12 +83,11 @@
switch (bits_per_sample) {
case 16:
- error = max98095_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS,
- 0);
+ error = maxim_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS, 0);
break;
case 24:
- error = max98095_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS,
- M98095_DAI_WS);
+ error = maxim_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS,
+ M98095_DAI_WS);
break;
default:
debug("%s: Illegal bits per sample %d.\n",
@@ -189,15 +102,15 @@
}
priv->rate = rate;
- error |= max98095_bic_or(priv, M98095_DAI_CLKMODE, M98095_CLKMODE_MASK,
+ error |= maxim_bic_or(priv, M98095_DAI_CLKMODE, M98095_CLKMODE_MASK,
regval);
/* Update sample rate mode */
if (rate < 50000)
- error |= max98095_bic_or(priv, M98095_DAI_FILTERS,
+ error |= maxim_bic_or(priv, M98095_DAI_FILTERS,
M98095_DAI_DHF, 0);
else
- error |= max98095_bic_or(priv, M98095_DAI_FILTERS,
+ error |= maxim_bic_or(priv, M98095_DAI_FILTERS,
M98095_DAI_DHF, M98095_DAI_DHF);
if (error < 0) {
@@ -216,7 +129,7 @@
*
* @return -1 for error and 0 success.
*/
-static int max98095_set_sysclk(struct max98095_priv *priv, unsigned int freq)
+static int max98095_set_sysclk(struct maxim_priv *priv, unsigned int freq)
{
int error = 0;
@@ -230,11 +143,11 @@
* 0x03 (when master clk is 40MHz to 60MHz)..
*/
if ((freq >= 10000000) && (freq < 20000000)) {
- error = max98095_i2c_write(priv, M98095_026_SYS_CLK, 0x10);
+ error = maxim_i2c_write(priv, M98095_026_SYS_CLK, 0x10);
} else if ((freq >= 20000000) && (freq < 40000000)) {
- error = max98095_i2c_write(priv, M98095_026_SYS_CLK, 0x20);
+ error = maxim_i2c_write(priv, M98095_026_SYS_CLK, 0x20);
} else if ((freq >= 40000000) && (freq < 60000000)) {
- error = max98095_i2c_write(priv, M98095_026_SYS_CLK, 0x30);
+ error = maxim_i2c_write(priv, M98095_026_SYS_CLK, 0x30);
} else {
debug("%s: Invalid master clock frequency\n", __func__);
return -1;
@@ -258,7 +171,7 @@
*
* @return -1 for error and 0 Success.
*/
-static int max98095_set_fmt(struct max98095_priv *priv, int fmt,
+static int max98095_set_fmt(struct maxim_priv *priv, int fmt,
enum en_max_audio_interface aif_id)
{
u8 regval = 0;
@@ -288,8 +201,8 @@
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
/* Slave mode PLL */
- error |= max98095_i2c_write(priv, M98095_DAI_CLKCFG_HI, 0x80);
- error |= max98095_i2c_write(priv, M98095_DAI_CLKCFG_LO, 0x00);
+ error |= maxim_i2c_write(priv, M98095_DAI_CLKCFG_HI, 0x80);
+ error |= maxim_i2c_write(priv, M98095_DAI_CLKCFG_LO, 0x00);
break;
case SND_SOC_DAIFMT_CBM_CFM:
/* Set to master mode */
@@ -330,11 +243,11 @@
return -1;
}
- error |= max98095_bic_or(priv, M98095_DAI_FORMAT,
+ error |= maxim_bic_or(priv, M98095_DAI_FORMAT,
M98095_DAI_MAS | M98095_DAI_DLY |
M98095_DAI_BCI | M98095_DAI_WCI, regval);
- error |= max98095_i2c_write(priv, M98095_DAI_CLOCK, M98095_DAI_BSEL64);
+ error |= maxim_i2c_write(priv, M98095_DAI_CLOCK, M98095_DAI_BSEL64);
if (error < 0) {
debug("%s: Error setting i2s format.\n", __func__);
@@ -350,7 +263,7 @@
* @param priv Private data for driver
* @return -1 for error and 0 success.
*/
-static int max98095_reset(struct max98095_priv *priv)
+static int max98095_reset(struct maxim_priv *priv)
{
int i, ret;
@@ -358,13 +271,13 @@
* Gracefully reset the DSP core and the codec hardware in a proper
* sequence.
*/
- ret = max98095_i2c_write(priv, M98095_00F_HOST_CFG, 0);
+ ret = maxim_i2c_write(priv, M98095_00F_HOST_CFG, 0);
if (ret != 0) {
debug("%s: Failed to reset DSP: %d\n", __func__, ret);
return ret;
}
- ret = max98095_i2c_write(priv, M98095_097_PWR_SYS, 0);
+ ret = maxim_i2c_write(priv, M98095_097_PWR_SYS, 0);
if (ret != 0) {
debug("%s: Failed to reset codec: %d\n", __func__, ret);
return ret;
@@ -375,7 +288,7 @@
* reset hardware control register.
*/
for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) {
- ret = max98095_i2c_write(priv, i, 0);
+ ret = maxim_i2c_write(priv, i, 0);
if (ret < 0) {
debug("%s: Failed to reset: %d\n", __func__, ret);
return ret;
@@ -392,7 +305,7 @@
*
* @returns -1 for error and 0 Success.
*/
-static int max98095_device_init(struct max98095_priv *priv)
+static int max98095_device_init(struct maxim_priv *priv)
{
unsigned char id;
int error = 0;
@@ -412,7 +325,7 @@
priv->rate = -1U;
priv->fmt = -1U;
- error = max98095_i2c_read(priv, M98095_0FF_REV_ID, &id);
+ error = maxim_i2c_read(priv, M98095_0FF_REV_ID, &id);
if (error < 0) {
debug("%s: Failure reading hardware revision: %d\n",
__func__, id);
@@ -423,63 +336,63 @@
return 0;
}
-static int max98095_setup_interface(struct max98095_priv *priv,
+static int max98095_setup_interface(struct maxim_priv *priv,
enum en_max_audio_interface aif_id)
{
int error;
- error = max98095_i2c_write(priv, M98095_097_PWR_SYS, M98095_PWRSV);
+ error = maxim_i2c_write(priv, M98095_097_PWR_SYS, M98095_PWRSV);
/*
* initialize registers to hardware default configuring audio
* interface2 to DAC
*/
if (aif_id == AIF1)
- error |= max98095_i2c_write(priv, M98095_048_MIX_DAC_LR,
+ error |= maxim_i2c_write(priv, M98095_048_MIX_DAC_LR,
M98095_DAI1L_TO_DACL |
M98095_DAI1R_TO_DACR);
else
- error |= max98095_i2c_write(priv, M98095_048_MIX_DAC_LR,
+ error |= maxim_i2c_write(priv, M98095_048_MIX_DAC_LR,
M98095_DAI2M_TO_DACL |
M98095_DAI2M_TO_DACR);
- error |= max98095_i2c_write(priv, M98095_092_PWR_EN_OUT,
+ error |= maxim_i2c_write(priv, M98095_092_PWR_EN_OUT,
M98095_SPK_SPREADSPECTRUM);
- error |= max98095_i2c_write(priv, M98095_04E_CFG_HP, M98095_HPNORMAL);
+ error |= maxim_i2c_write(priv, M98095_04E_CFG_HP, M98095_HPNORMAL);
if (aif_id == AIF1)
- error |= max98095_i2c_write(priv, M98095_02C_DAI1_IOCFG,
+ error |= maxim_i2c_write(priv, M98095_02C_DAI1_IOCFG,
M98095_S1NORMAL | M98095_SDATA);
else
- error |= max98095_i2c_write(priv, M98095_036_DAI2_IOCFG,
+ error |= maxim_i2c_write(priv, M98095_036_DAI2_IOCFG,
M98095_S2NORMAL | M98095_SDATA);
/* take the codec out of the shut down */
- error |= max98095_bic_or(priv, M98095_097_PWR_SYS, M98095_SHDNRUN,
+ error |= maxim_bic_or(priv, M98095_097_PWR_SYS, M98095_SHDNRUN,
M98095_SHDNRUN);
/*
* route DACL and DACR output to HO and Speakers
* Ordering: DACL, DACR, DACL, DACR
*/
- error |= max98095_i2c_write(priv, M98095_050_MIX_SPK_LEFT, 0x01);
- error |= max98095_i2c_write(priv, M98095_051_MIX_SPK_RIGHT, 0x01);
- error |= max98095_i2c_write(priv, M98095_04C_MIX_HP_LEFT, 0x01);
- error |= max98095_i2c_write(priv, M98095_04D_MIX_HP_RIGHT, 0x01);
+ error |= maxim_i2c_write(priv, M98095_050_MIX_SPK_LEFT, 0x01);
+ error |= maxim_i2c_write(priv, M98095_051_MIX_SPK_RIGHT, 0x01);
+ error |= maxim_i2c_write(priv, M98095_04C_MIX_HP_LEFT, 0x01);
+ error |= maxim_i2c_write(priv, M98095_04D_MIX_HP_RIGHT, 0x01);
/* power Enable */
- error |= max98095_i2c_write(priv, M98095_091_PWR_EN_OUT, 0xF3);
+ error |= maxim_i2c_write(priv, M98095_091_PWR_EN_OUT, 0xF3);
/* set Volume */
- error |= max98095_i2c_write(priv, M98095_064_LVL_HP_L, 15);
- error |= max98095_i2c_write(priv, M98095_065_LVL_HP_R, 15);
- error |= max98095_i2c_write(priv, M98095_067_LVL_SPK_L, 16);
- error |= max98095_i2c_write(priv, M98095_068_LVL_SPK_R, 16);
+ error |= maxim_i2c_write(priv, M98095_064_LVL_HP_L, 15);
+ error |= maxim_i2c_write(priv, M98095_065_LVL_HP_R, 15);
+ error |= maxim_i2c_write(priv, M98095_067_LVL_SPK_L, 16);
+ error |= maxim_i2c_write(priv, M98095_068_LVL_SPK_R, 16);
/* Enable DAIs */
- error |= max98095_i2c_write(priv, M98095_093_BIAS_CTRL, 0x30);
+ error |= maxim_i2c_write(priv, M98095_093_BIAS_CTRL, 0x30);
if (aif_id == AIF1)
- error |= max98095_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x01);
+ error |= maxim_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x01);
else
- error |= max98095_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x07);
+ error |= maxim_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x07);
if (error < 0)
return -1;
@@ -487,7 +400,7 @@
return 0;
}
-static int max98095_do_init(struct max98095_priv *priv,
+static int max98095_do_init(struct maxim_priv *priv,
enum en_max_audio_interface aif_id,
int sampling_rate, int mclk_freq,
int bits_per_sample)
@@ -601,7 +514,7 @@
int mclk_freq, int bits_per_sample,
uint channels)
{
- struct max98095_priv *priv = dev_get_priv(dev);
+ struct maxim_priv *priv = dev_get_priv(dev);
return max98095_do_init(priv, interface, rate, mclk_freq,
bits_per_sample);
@@ -609,7 +522,7 @@
static int max98095_probe(struct udevice *dev)
{
- struct max98095_priv *priv = dev_get_priv(dev);
+ struct maxim_priv *priv = dev_get_priv(dev);
int ret;
priv->dev = dev;
@@ -637,5 +550,5 @@
.of_match = max98095_ids,
.probe = max98095_probe,
.ops = &max98095_ops,
- .priv_auto_alloc_size = sizeof(struct max98095_priv),
+ .priv_auto_alloc_size = sizeof(struct maxim_priv),
};
diff --git a/drivers/sound/max98095.h b/drivers/sound/max98095.h
index 13ae177..f189db7 100644
--- a/drivers/sound/max98095.h
+++ b/drivers/sound/max98095.h
@@ -11,6 +11,8 @@
#ifndef _MAX98095_H
#define _MAX98095_H
+#include "maxim_codec.h"
+
/* Available audio interface ports in wm8994 codec */
enum en_max_audio_interface {
AIF1,
diff --git a/drivers/sound/maxim_codec.c b/drivers/sound/maxim_codec.c
new file mode 100644
index 0000000..dcaf081
--- /dev/null
+++ b/drivers/sound/maxim_codec.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * maxim_codec.c -- MAXIM CODEC Common driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+#include "maxim_codec.h"
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param priv Private data for driver
+ * @param reg reg number to be write
+ * @param data data to be writen to the above registor
+ *
+ * @return int value 1 for change, 0 for no change or negative error code.
+ */
+int maxim_i2c_write(struct maxim_priv *priv, unsigned int reg,
+ unsigned char data)
+{
+ debug("%s: Write Addr : 0x%02X, Data : 0x%02X\n",
+ __func__, reg, data);
+ return dm_i2c_write(priv->dev, reg, &data, 1);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param priv Private data for driver
+ * @param reg reg number to be read
+ * @param data address of read data to be stored
+ *
+ * @return int value 0 for success, -1 in case of error.
+ */
+unsigned int maxim_i2c_read(struct maxim_priv *priv, unsigned int reg,
+ unsigned char *data)
+{
+ int ret;
+
+ return dm_i2c_read(priv->dev, reg, data, 1);
+ if (ret != 0) {
+ debug("%s: Error while reading register %#04x\n",
+ __func__, reg);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param priv Private data for driver
+ * @param reg codec register
+ * @param mask register mask
+ * @param value new value
+ *
+ * @return int value 0 for success, non-zero error code.
+ */
+int maxim_bic_or(struct maxim_priv *priv, unsigned int reg, unsigned char mask,
+ unsigned char value)
+{
+ int change, ret = 0;
+ unsigned char old, new;
+
+ if (maxim_i2c_read(priv, reg, &old) != 0)
+ return -1;
+ new = (old & ~mask) | (value & mask);
+ change = (old != new) ? 1 : 0;
+ if (change)
+ ret = maxim_i2c_write(priv, reg, new);
+ if (ret < 0)
+ return ret;
+
+ return change;
+}
diff --git a/drivers/sound/maxim_codec.h b/drivers/sound/maxim_codec.h
new file mode 100644
index 0000000..a3128e0
--- /dev/null
+++ b/drivers/sound/maxim_codec.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * maxim_codec.h -- MAXIM codec common interface file
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * D Krishna Mohan <krishna.md@samsung.com>
+ */
+
+#ifndef __MAXIM_COMMON_H__
+#define __MAXIM_COMMON_H__
+
+enum maxim_codec_type {
+ MAX98095,
+ MAX98090,
+};
+
+struct maxim_priv {
+ enum maxim_codec_type devtype;
+ unsigned int sysclk;
+ unsigned int rate;
+ unsigned int fmt;
+ struct udevice *dev;
+};
+
+#define MAXIM_AUDIO_I2C_BUS 7
+#define MAXIM_AUDIO_I2C_REG_98095 0x22
+
+#define MAXIM_AUDIO_I2C_REG MAXIM_AUDIO_I2C_REG_98095
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param priv Private data for driver
+ * @param reg reg number to be write
+ * @param data data to be writen to the above registor
+ *
+ * @return int value 1 for change, 0 for no change or negative error code.
+ */
+int maxim_i2c_write(struct maxim_priv *priv, unsigned int reg,
+ unsigned char data);
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param priv Private data for driver
+ * @param reg reg number to be read
+ * @param data address of read data to be stored
+ *
+ * @return int value 0 for success, -1 in case of error.
+ */
+unsigned int maxim_i2c_read(struct maxim_priv *priv, unsigned int reg,
+ unsigned char *data);
+
+/*
+ * update device register bits through i2c
+ *
+ * @param priv Private data for driver
+ * @param reg codec register
+ * @param mask register mask
+ * @param value new value
+ *
+ * @return int value 0 for success, non-zero error code.
+ */
+int maxim_bic_or(struct maxim_priv *priv, unsigned int reg, unsigned char mask,
+ unsigned char value);
+
+#endif /* __MAXIM_COMMON_H__ */