ARM: zynq: Fix addresses in partition definitions

Node name should be <name>@<address> which is not how partitions are
described.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/dts/zynq-cse-qspi.dtsi b/arch/arm/dts/zynq-cse-qspi.dtsi
index 65af408..eb0e29e 100644
--- a/arch/arm/dts/zynq-cse-qspi.dtsi
+++ b/arch/arm/dts/zynq-cse-qspi.dtsi
@@ -67,23 +67,23 @@
 				spi-max-frequency = <50000000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
-				partition@qspi-fsbl-uboot {
+				partition@0 {
 					label = "qspi-fsbl-uboot";
 					reg = <0x0 0x100000>;
 				};
-				partition@qspi-linux {
+				partition@100000 {
 					label = "qspi-linux";
 					reg = <0x100000 0x500000>;
 				};
-				partition@qspi-device-tree {
+				partition@600000 {
 					label = "qspi-device-tree";
 					reg = <0x600000 0x20000>;
 				};
-				partition@qspi-rootfs {
+				partition@620000 {
 					label = "qspi-rootfs";
 					reg = <0x620000 0x5E0000>;
 				};
-				partition@qspi-bitstream {
+				partition@c00000 {
 					label = "qspi-bitstream";
 					reg = <0xC00000 0x400000>;
 				};
diff --git a/arch/arm/dts/zynq-topic-miami.dts b/arch/arm/dts/zynq-topic-miami.dts
index f6f10fe..ab6bde9 100644
--- a/arch/arm/dts/zynq-topic-miami.dts
+++ b/arch/arm/dts/zynq-topic-miami.dts
@@ -44,23 +44,23 @@
 		spi-max-frequency = <100000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		partition@qspi-u-boot-spl {
+		partition@0 {
 			label = "qspi-u-boot-spl";
 			reg = <0x00000 0x10000>;
 		};
-		partition@qspi-u-boot-img {
+		partition@10000 {
 			label = "qspi-u-boot-img";
 			reg = <0x10000 0x60000>;
 		};
-		partition@qspi-device-tree {
+		partition@70000 {
 			label = "qspi-device-tree";
 			reg = <0x70000 0x10000>;
 		};
-		partition@qspi-linux {
+		partition@80000 {
 			label = "qspi-linux";
 			reg = <0x80000 0x400000>;
 		};
-		partition@qspi-rootfs {
+		partition@480000 {
 			label = "qspi-rootfs";
 			reg = <0x480000 0x1b80000>;
 		};