x86: Add LAPIC setup code
Add code to set up the Local Advanced Peripheral Interrupt Controller.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 3839262..7f09db5 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -15,5 +15,6 @@
obj-$(CONFIG_SYS_COREBOOT) += coreboot/
obj-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ivybridge/
obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/
+obj-y += lapic.o
obj-$(CONFIG_PCI) += pci.o
obj-y += turbo.o
diff --git a/arch/x86/cpu/lapic.c b/arch/x86/cpu/lapic.c
new file mode 100644
index 0000000..4690603
--- /dev/null
+++ b/arch/x86/cpu/lapic.c
@@ -0,0 +1,57 @@
+/*
+ * From coreboot file of same name
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/lapic.h>
+#include <asm/post.h>
+
+void lapic_setup(void)
+{
+#if NEED_LAPIC == 1
+ /* Only Pentium Pro and later have those MSR stuff */
+ debug("Setting up local apic: ");
+
+ /* Enable the local apic */
+ enable_lapic();
+
+ /*
+ * Set Task Priority to 'accept all'.
+ */
+ lapic_write_around(LAPIC_TASKPRI,
+ lapic_read_around(LAPIC_TASKPRI) & ~LAPIC_TPRI_MASK);
+
+ /* Put the local apic in virtual wire mode */
+ lapic_write_around(LAPIC_SPIV, (lapic_read_around(LAPIC_SPIV) &
+ ~(LAPIC_VECTOR_MASK)) | LAPIC_SPIV_ENABLE);
+ lapic_write_around(LAPIC_LVT0, (lapic_read_around(LAPIC_LVT0) &
+ ~(LAPIC_LVT_MASKED | LAPIC_LVT_LEVEL_TRIGGER |
+ LAPIC_LVT_REMOTE_IRR | LAPIC_INPUT_POLARITY |
+ LAPIC_SEND_PENDING | LAPIC_LVT_RESERVED_1 |
+ LAPIC_DELIVERY_MODE_MASK)) |
+ (LAPIC_LVT_REMOTE_IRR | LAPIC_SEND_PENDING |
+ LAPIC_DELIVERY_MODE_EXTINT));
+ lapic_write_around(LAPIC_LVT1, (lapic_read_around(LAPIC_LVT1) &
+ ~(LAPIC_LVT_MASKED | LAPIC_LVT_LEVEL_TRIGGER |
+ LAPIC_LVT_REMOTE_IRR | LAPIC_INPUT_POLARITY |
+ LAPIC_SEND_PENDING | LAPIC_LVT_RESERVED_1 |
+ LAPIC_DELIVERY_MODE_MASK)) |
+ (LAPIC_LVT_REMOTE_IRR | LAPIC_SEND_PENDING |
+ LAPIC_DELIVERY_MODE_NMI));
+
+ debug("apic_id: 0x%02lx, ", lapicid());
+#else /* !NEED_LLAPIC */
+ /* Only Pentium Pro and later have those MSR stuff */
+ debug("Disabling local apic: ");
+ disable_lapic();
+#endif /* !NEED_LAPIC */
+ debug("done.\n");
+ post_code(POST_LAPIC);
+}
diff --git a/arch/x86/include/asm/lapic.h b/arch/x86/include/asm/lapic.h
index 948e643..0a7f443 100644
--- a/arch/x86/include/asm/lapic.h
+++ b/arch/x86/include/asm/lapic.h
@@ -14,6 +14,13 @@
#include <asm/msr.h>
#include <asm/processor.h>
+/* See if I need to initialize the local apic */
+#if CONFIG_SMP || CONFIG_IOAPIC
+# define NEED_LAPIC 1
+#else
+# define NEED_LAPIC 0
+#endif
+
static inline __attribute__((always_inline))
unsigned long lapic_read(unsigned long reg)
{
@@ -37,8 +44,9 @@
msr = msr_read(LAPIC_BASE_MSR);
msr.hi &= 0xffffff00;
- msr.lo &= 0x000007ff;
- msr.lo |= LAPIC_DEFAULT_BASE | (1 << 11);
+ msr.lo |= LAPIC_BASE_MSR_ENABLE;
+ msr.lo &= ~LAPIC_BASE_MSR_ADDR_MASK;
+ msr.lo |= LAPIC_DEFAULT_BASE;
msr_write(LAPIC_BASE_MSR, msr);
}
@@ -56,4 +64,116 @@
return lapic_read(LAPIC_ID) >> 24;
}
+#if !CONFIG_AP_IN_SIPI_WAIT
+/* If we need to go back to sipi wait, we use the long non-inlined version of
+ * this function in lapic_cpu_init.c
+ */
+static inline __attribute__((always_inline)) void stop_this_cpu(void)
+{
+ /* Called by an AP when it is ready to halt and wait for a new task */
+ for (;;)
+ cpu_hlt();
+}
+#else
+void stop_this_cpu(void);
+#endif
+
+#define xchg(ptr, v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v), (ptr), \
+ sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ * but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+ int size)
+{
+ switch (size) {
+ case 1:
+ __asm__ __volatile__("xchgb %b0,%1"
+ : "=q" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__("xchgw %w0,%1"
+ : "=r" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__("xchgl %0,%1"
+ : "=r" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
+ }
+
+ return x;
+}
+
+static inline void lapic_write_atomic(unsigned long reg, unsigned long v)
+{
+ (void)xchg((volatile unsigned long *)(LAPIC_DEFAULT_BASE + reg), v);
+}
+
+
+#ifdef X86_GOOD_APIC
+# define FORCE_READ_AROUND_WRITE 0
+# define lapic_read_around(x) lapic_read(x)
+# define lapic_write_around(x, y) lapic_write((x), (y))
+#else
+# define FORCE_READ_AROUND_WRITE 1
+# define lapic_read_around(x) lapic_read(x)
+# define lapic_write_around(x, y) lapic_write_atomic((x), (y))
+#endif
+
+static inline int lapic_remote_read(int apicid, int reg, unsigned long *pvalue)
+{
+ int timeout;
+ unsigned long status;
+ int result;
+ lapic_wait_icr_idle();
+ lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid));
+ lapic_write_around(LAPIC_ICR, LAPIC_DM_REMRD | (reg >> 4));
+ timeout = 0;
+ do {
+ status = lapic_read(LAPIC_ICR) & LAPIC_ICR_RR_MASK;
+ } while (status == LAPIC_ICR_RR_INPROG && timeout++ < 1000);
+
+ result = -1;
+ if (status == LAPIC_ICR_RR_VALID) {
+ *pvalue = lapic_read(LAPIC_RRR);
+ result = 0;
+ }
+ return result;
+}
+
+
+void lapic_setup(void);
+
+#if CONFIG_SMP
+struct device;
+int start_cpu(struct device *cpu);
+#endif /* CONFIG_SMP */
+
+int boot_cpu(void);
+
+/**
+ * struct x86_cpu_priv - Information about a single CPU
+ *
+ * @apic_id: Advanced Programmable Interrupt Controller Identifier, which is
+ * just a number representing the CPU core
+ *
+ * TODO: Move this to driver model once lifecycle is understood
+ */
+struct x86_cpu_priv {
+ int apic_id;
+ int start_err;
+};
+
#endif
diff --git a/arch/x86/include/asm/post.h b/arch/x86/include/asm/post.h
index ce68839..6d2ae5d 100644
--- a/arch/x86/include/asm/post.h
+++ b/arch/x86/include/asm/post.h
@@ -30,6 +30,7 @@
#define POST_PRE_MRC 0x2e
#define POST_MRC 0x2f
#define POST_DRAM 0x2f
+#define POST_LAPIC 0x30
#define POST_RAM_FAILURE 0xea