WS cleanup: remove SPACE(s) followed by TAB
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index f8df5b0..e7fca46 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -86,7 +86,7 @@
(AT91_PMC_PLLAR_29 | \
AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \
AT91_PMC_PLLXR_PLLCOUNT(63) | \
- AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \
+ AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \
AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
/* PCK/2 = MCK Master Clock from PLLA */
@@ -96,7 +96,7 @@
/* PCK/2 = MCK Master Clock from PLLA */
#define CONFIG_SYS_MCKR2_VAL \
- (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \
+ (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \
AT91_PMC_MCKR_MDIV_2)
/* define PDC[31:16] as DATA[31:16] */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 2a0a6be..01f4dba 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -148,7 +148,7 @@
#define PIXIS_LBMAP_ALTBANK 0x40
#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h
index 270c44e..4d4c94b 100644
--- a/include/configs/imx7-cm.h
+++ b/include/configs/imx7-cm.h
@@ -20,9 +20,9 @@
/*
* Use:
- * boot-mode=mix
- * boot-mode=sd
- * boot-mode=net
+ * boot-mode=mix
+ * boot-mode=sd
+ * boot-mode=net
*/
#define MY_CONFIG_BOOT_MODE "boot-mode=sd\0"
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index f6909d0..6cae6c1 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -219,7 +219,7 @@
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
- "fdt_addr=0x64f00000\0" \
+ "fdt_addr=0x64f00000\0" \
"kernel_addr=0x61000000\0" \
"scriptaddr=0x80000000\0" \
"scripthdraddr=0x80080000\0" \
diff --git a/include/configs/novena.h b/include/configs/novena.h
index 46c5301..28fb1b8 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -104,7 +104,7 @@
"kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
"pxefile_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
"scriptaddr="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
- "ramdisk_addr_r=0x28000000\0" \
+ "ramdisk_addr_r=0x28000000\0" \
"fdt_addr_r=0x18000000\0" \
"fdtfile=imx6q-novena.dtb\0" \
"stdout=serial,vidconsole\0" \
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 265b1e2..8c830d9 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -203,7 +203,7 @@
"${defargs} " \
"${optargs} " \
"root=${ramroot} ramdisk_size=${ramdisk_size} " \
- "rootfstype=${ramrootfstype}\0" \
+ "rootfstype=${ramrootfstype}\0" \
"ramboot=run mmcbootenv; " \
"if run loadimage && run loaddtb && run loadramdisk; then " \
"echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} w/ramdisk ...; " \
diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h
index 33bc30e..f9db8ef 100644
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@@ -75,7 +75,7 @@
"mmcrootfstype=ext4 rootwait\0" \
"kernelimg=" __stringify(CONFIG_BOARD_NAME) "-linux.bin\0" \
"splashpos=0,0\0" \
- "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0\0" \
"check_env=if test -n ${flash_env_version}; " \
"then env default env_version; " \
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 400cea4..4fd119c 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -129,7 +129,7 @@
#define CONFIG_SYS_FPGA_SIZE 0x00100000 /* 1 MB */
#define CONFIG_SYS_HMI_BASE 0xc0010000
#define CONFIG_SYS_BR3_PRELIM 0xc0001881 /* UPMA, 32-bit */
-#define CONFIG_SYS_OR3_PRELIM 0xfff00000 /* 1 MB */
+#define CONFIG_SYS_OR3_PRELIM 0xfff00000 /* 1 MB */
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_FPGA_BASE + 0x70)
#define CONFIG_SYS_MAX_NAND_DEVICE 1
@@ -246,17 +246,17 @@
"era fe000000 fe1dffff;" \
"cp.b 100000 fe000000 ${filesize};" \
"setenv filesize;saveenv\0" \
- "update_fdt=tftp 100000 ${fdt_file};" \
+ "update_fdt=tftp 100000 ${fdt_file};" \
"era fe1e0000 fe1fffff;" \
"cp.b 100000 fe1e0000 ${filesize};" \
"setenv filesize;saveenv\0" \
- "update_initrd=tftp 100000 ${initrd_file};" \
+ "update_initrd=tftp 100000 ${initrd_file};" \
"era fe200000 fe9fffff;" \
"cp.b 100000 fe200000 ${filesize};" \
"setenv filesize;saveenv\0" \
"clean_data=era fea00000 fff5ffff\0" \
- "usbargs=setenv bootargs root=/dev/sda1 rw\0" \
- "load_usb=usb start;" \
+ "usbargs=setenv bootargs root=/dev/sda1 rw\0" \
+ "load_usb=usb start;" \
"ext2load usb 0:1 ${kernel_addr_r} /boot/uImage\0" \
"boot_usb=run load_usb usbargs addcons;" \
"bootm ${kernel_addr_r} - ${fdt_addr};" \