imx: support i.MX8QM MEK board
Add i.MX8QM MEK board support.
Included a basic dts, enabled SPL FIT
Boot log as below:
U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
Normal Boot
Trying to boot from MMC2_2
U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
CPU: NXP i.MX8QM RevB A53 at 142933 MHz
Model: Freescale i.MX8QM MEK
Board: iMX8QM MEK
Build: SCFW 9330215b
Boot: SD1
DRAM: 6 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@5a060000
Out: serial@5a060000
Err: serial@5a060000
Net:
Error: ethernet@5b040000 address not set.
eth-1: ethernet@5b040000
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/board/freescale/imx8qm_mek/MAINTAINERS b/board/freescale/imx8qm_mek/MAINTAINERS
new file mode 100644
index 0000000..115830d
--- /dev/null
+++ b/board/freescale/imx8qm_mek/MAINTAINERS
@@ -0,0 +1,6 @@
+i.MX8QM MEK BOARD
+M: Peng Fan <peng.fan@nxp.com>
+S: Maintained
+F: board/freescale/imx8qm_mek/
+F: include/configs/imx8qm_mek.h
+F: configs/imx8qm_mek_defconfig