Patch by Kenneth Johansson, 30 Jun 2003:
get rid of MK_CMD_ENTRY macro; update doc/README.command
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 4d02d2d..7e6c19e 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -963,66 +963,66 @@
/**************************************************/
#if (CONFIG_COMMANDS & CFG_CMD_MEMORY)
-cmd_tbl_t U_BOOT_CMD(MD) = MK_CMD_ENTRY(
- "md", 3, 1, do_mem_md,
+U_BOOT_CMD(
+ md, 3, 1, do_mem_md,
"md - memory display\n",
"[.b, .w, .l] address [# of objects]\n - memory display\n"
);
-cmd_tbl_t U_BOOT_CMD(MM) = MK_CMD_ENTRY(
- "mm", 2, 1, do_mem_mm,
+U_BOOT_CMD(
+ mm, 2, 1, do_mem_mm,
"mm - memory modify (auto-incrementing)\n",
"[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
);
-cmd_tbl_t U_BOOT_CMD(NM) = MK_CMD_ENTRY(
- "nm", 2, 1, do_mem_nm,
+U_BOOT_CMD(
+ nm, 2, 1, do_mem_nm,
"nm - memory modify (constant address)\n",
"[.b, .w, .l] address\n - memory modify, read and keep address\n"
);
-cmd_tbl_t U_BOOT_CMD(MW) = MK_CMD_ENTRY(
- "mw", 4, 1, do_mem_mw,
+U_BOOT_CMD(
+ mw, 4, 1, do_mem_mw,
"mw - memory write (fill)\n",
"[.b, .w, .l] address value [count]\n - write memory\n"
);
-cmd_tbl_t U_BOOT_CMD(CP) = MK_CMD_ENTRY(
- "cp", 4, 1, do_mem_cp,
+U_BOOT_CMD(
+ cp, 4, 1, do_mem_cp,
"cp - memory copy\n",
"[.b, .w, .l] source target count\n - copy memory\n"
);
-cmd_tbl_t U_BOOT_CMD(CMP) = MK_CMD_ENTRY(
- "cmp", 4, 1, do_mem_cmp,
+U_BOOT_CMD(
+ cmp, 4, 1, do_mem_cmp,
"cmp - memory compare\n",
"[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
);
-cmd_tbl_t U_BOOT_CMD(CRC32) = MK_CMD_ENTRY(
- "crc32", 4, 1, do_mem_crc,
+U_BOOT_CMD(
+ crc32, 4, 1, do_mem_crc,
"crc32 - checksum calculation\n",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
);
-cmd_tbl_t U_BOOT_CMD(BASE) = MK_CMD_ENTRY(
- "base", 2, 1, do_mem_base,
+U_BOOT_CMD(
+ base, 2, 1, do_mem_base,
"base - print or set address offset\n",
"\n - print address offset for memory commands\n"
"base off\n - set address offset for memory commands to 'off'\n"
);
-cmd_tbl_t U_BOOT_CMD(LOOP) = MK_CMD_ENTRY(
- "loop", 3, 1, do_mem_loop,
+U_BOOT_CMD(
+ loop, 3, 1, do_mem_loop,
"loop - infinite loop on address range\n",
"[.b, .w, .l] address number_of_objects\n"
" - loop on a set of addresses\n"
);
-cmd_tbl_t U_BOOT_CMD(MTEST) = MK_CMD_ENTRY(
- "mtest", 4, 1, do_mem_mtest,
+U_BOOT_CMD(
+ mtest, 4, 1, do_mem_mtest,
"mtest - simple RAM test\n",
"[start [end [pattern]]]\n"
" - simple RAM read/write test\n"