rockchip: rk3588: Fix boot from SPI flash
The commit fd6e425be243 ("rockchip: rk3588-rock-5b: Enable boot from SPI
NOR flash") added a new BROM_BOOTSOURCE_SPINOR_RK3588 with value 6.
At the time the reason for this new bootsource id value 6 was unknown.
We now know that the BootRom on RK3588 use different bootsource id
values depending on the iomux used by the flash spi controller, and not
by the type of spi nor or spi nand flash used.
Add the following enum values and use them for RK3588 boot_devices.
- BROM_BOOTSOURCE_FSPI_M0 = 3
- BROM_BOOTSOURCE_FSPI_M1 = 4
- BROM_BOOTSOURCE_FSPI_M2 = 6
Fixes: fd6e425be243 ("rockchip: rk3588-rock-5b: Enable boot from SPI NOR flash")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Slawomir Stepien <sst@poczta.fm>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/mach-rockchip/rk3588/rk3588.c b/arch/arm/mach-rockchip/rk3588/rk3588.c
index b1f535f..91c9d32 100644
--- a/arch/arm/mach-rockchip/rk3588/rk3588.c
+++ b/arch/arm/mach-rockchip/rk3588/rk3588.c
@@ -37,11 +37,23 @@
#define BUS_IOC_GPIO2D_IOMUX_SEL_H 0x5c
#define BUS_IOC_GPIO3A_IOMUX_SEL_L 0x60
+/**
+ * Boot-device identifiers used by the BROM on RK3588 when device is booted
+ * from SPI flash. IOMUX used for SPI flash affect the value used by the BROM
+ * and not the type of SPI flash used.
+ */
+enum {
+ BROM_BOOTSOURCE_FSPI_M0 = 3,
+ BROM_BOOTSOURCE_FSPI_M1 = 4,
+ BROM_BOOTSOURCE_FSPI_M2 = 6,
+};
+
const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
[BROM_BOOTSOURCE_EMMC] = "/mmc@fe2e0000",
- [BROM_BOOTSOURCE_SPINOR] = "/spi@fe2b0000/flash@0",
+ [BROM_BOOTSOURCE_FSPI_M0] = "/spi@fe2b0000/flash@0",
+ [BROM_BOOTSOURCE_FSPI_M1] = "/spi@fe2b0000/flash@0",
+ [BROM_BOOTSOURCE_FSPI_M2] = "/spi@fe2b0000/flash@0",
[BROM_BOOTSOURCE_SD] = "/mmc@fe2c0000",
- [BROM_BOOTSOURCE_SPINOR_RK3588] = "/spi@fe2b0000/flash@0",
};
static struct mm_region rk3588_mem_map[] = {