da850/omap-l138: Add support to read u-boot image from MMC/SD
DA850/OMAP-L138 does not support strict MMC/SD boot mode. SPL will
be in SPI flash and U-Boot image will be in MMC/SD card. SPL will
do the low level initialization and then loads the u-boot image
from MMC/SD card.
Define CONFIG_SPL_MMC_LOAD macro in the DA850/OMAP-L138
configuration file to enable this feature.
Tested-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index c567737..2b96cdc 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -25,6 +25,10 @@
LIB := $(obj)libmmc.o
+ifdef CONFIG_SPL_MMC_LOAD
+COBJS-$(CONFIG_SPL_MMC_LOAD) += spl_mmc_load.o
+endif
+
COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
diff --git a/drivers/mmc/spl_mmc_load.c b/drivers/mmc/spl_mmc_load.c
new file mode 100644
index 0000000..79a68fb
--- /dev/null
+++ b/drivers/mmc/spl_mmc_load.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void mmc_load_image(struct mmc *mmc)
+{
+ s32 err;
+ void (*uboot)(void) __noreturn;
+
+ err = mmc->block_dev.block_read(0, CONFIG_SYS_MMC_U_BOOT_OFFS,
+ CONFIG_SYS_MMC_U_BOOT_SIZE/512,
+ (u32 *)CONFIG_SYS_TEXT_BASE);
+
+ if (err <= 0) {
+ printf("spl: error reading image %s, err - %d\n",
+ "u-boot.img", err);
+ hang();
+ }
+ uboot = (void *) CONFIG_SYS_TEXT_BASE;
+ (*uboot)();
+}
+
+void spl_mmc_load(void)
+{
+ struct mmc *mmc;
+ int err;
+ void (mmc_load_image)(struct mmc *mmc) __noreturn;
+
+ mmc_initialize(gd->bd);
+ mmc = find_mmc_device(0);
+ if (!mmc) {
+ puts("spl: mmc device not found!!\n");
+ hang();
+ } else {
+ puts("spl: mmc device found\n");
+ }
+ err = mmc_init(mmc);
+ if (err) {
+ printf("spl: mmc init failed: err - %d\n", err);
+ hang();
+ }
+ mmc_load_image(mmc);
+}