Merge branch 'master' of git://git.denx.de/u-boot-video
Conflicts:
include/splash.h
Signed-off-by: Tom Rini <trini@ti.com>
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index c18271f..948078b 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -18,6 +18,7 @@
#include <config.h>
#include <dm.h>
#include <fdt_support.h>
+#include <fdt_simplefb.h>
#include <lcd.h>
#include <mmc.h>
#include <asm/gpio.h>
diff --git a/common/Makefile b/common/Makefile
index b97bb95..7216a13 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -200,6 +200,7 @@
obj-y += splash.o
obj-$(CONFIG_SPLASH_SOURCE) += splash_source.o
obj-$(CONFIG_LCD) += lcd.o lcd_console.o
+obj-$(CONFIG_LCD_DT_SIMPLEFB) += lcd_simplefb.o
obj-$(CONFIG_LYNXKDI) += lynxkdi.o
obj-$(CONFIG_MENU) += menu.o
obj-$(CONFIG_MODEM_SUPPORT) += modem.o
diff --git a/common/lcd.c b/common/lcd.c
index 1195a54..f33942c 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -1,5 +1,5 @@
/*
- * Common LCD routines for supported CPUs
+ * Common LCD routines
*
* (C) Copyright 2001-2002
* Wolfgang Denk, DENX Software Engineering -- wd@denx.de
@@ -7,62 +7,27 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-/************************************************************************/
-/* ** HEADER FILES */
-/************************************************************************/
-
/* #define DEBUG */
-
#include <config.h>
#include <common.h>
#include <command.h>
-#include <stdarg.h>
-#include <search.h>
#include <env_callback.h>
#include <linux/types.h>
#include <stdio_dev.h>
-#if defined(CONFIG_POST)
-#include <post.h>
-#endif
#include <lcd.h>
#include <watchdog.h>
#include <asm/unaligned.h>
#include <splash.h>
#include <asm/io.h>
#include <asm/unaligned.h>
-#include <fdt_support.h>
+#include <video_font.h>
-#if defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
- defined(CONFIG_CPU_MONAHANS)
-#include <asm/byteorder.h>
-#endif
-
-#if defined(CONFIG_MPC823)
-#include <lcdvideo.h>
-#endif
-
-#if defined(CONFIG_ATMEL_LCD)
-#include <atmel_lcdc.h>
-#endif
-
-#if defined(CONFIG_LCD_DT_SIMPLEFB)
-#include <libfdt.h>
-#endif
-
-/************************************************************************/
-/* ** FONT DATA */
-/************************************************************************/
-#include <video_font.h> /* Get font data, width and height */
-
-/************************************************************************/
-/* ** LOGO DATA */
-/************************************************************************/
#ifdef CONFIG_LCD_LOGO
-# include <bmp_logo.h> /* Get logo data, width and height */
-# include <bmp_logo_data.h>
-# if (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET) && (LCD_BPP != LCD_COLOR16)
-# error Default Color Map overlaps with Logo Color Map
-# endif
+#include <bmp_logo.h>
+#include <bmp_logo_data.h>
+#if (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET) && (LCD_BPP != LCD_COLOR16)
+#error Default Color Map overlaps with Logo Color Map
+#endif
#endif
#ifdef CONFIG_SANDBOX
@@ -75,30 +40,23 @@
#if (LCD_BPP != LCD_COLOR8) && (LCD_BPP != LCD_COLOR16) && \
(LCD_BPP != LCD_COLOR32)
-# error Unsupported LCD BPP.
+#error Unsupported LCD BPP.
#endif
DECLARE_GLOBAL_DATA_PTR;
static int lcd_init(void *lcdbase);
-
-static void *lcd_logo(void);
-
+static void lcd_logo(void);
static void lcd_setfgcolor(int color);
static void lcd_setbgcolor(int color);
static int lcd_color_fg;
static int lcd_color_bg;
int lcd_line_length;
-
char lcd_is_enabled = 0;
-
static void *lcd_base; /* Start of framebuffer memory */
-
static char lcd_flush_dcache; /* 1 to flush dcache after each lcd update */
-/************************************************************************/
-
/* Flush LCD activity to the caches */
void lcd_sync(void)
{
@@ -128,8 +86,6 @@
lcd_flush_dcache = (flush != 0);
}
-/*----------------------------------------------------------------------*/
-
static void lcd_stub_putc(struct stdio_dev *dev, const char c)
{
lcd_putc(c);
@@ -140,9 +96,7 @@
lcd_puts(s);
}
-/************************************************************************/
-/** Small utility to check that you got the colours right */
-/************************************************************************/
+/* Small utility to check that you got the colours right */
#ifdef LCD_TEST_PATTERN
#define N_BLK_VERT 2
@@ -176,10 +130,6 @@
}
#endif /* LCD_TEST_PATTERN */
-
-/************************************************************************/
-/* ** GENERIC Initialization Routines */
-/************************************************************************/
/*
* With most lcd drivers the line length is set up
* by calculating it from panel_info parameters. Some
@@ -199,7 +149,7 @@
lcd_base = map_sysmem(gd->fb_base, 0);
- lcd_init(lcd_base); /* LCD initialization */
+ lcd_init(lcd_base);
/* Device initialization */
memset(&lcddev, 0, sizeof(lcddev));
@@ -215,11 +165,13 @@
return (rc == 0) ? 1 : rc;
}
-/*----------------------------------------------------------------------*/
void lcd_clear(void)
{
short console_rows, console_cols;
int bg_color;
+ char *s;
+ ulong addr;
+ static int do_splash = 1;
#if LCD_BPP == LCD_COLOR8
/* Setting the palette */
lcd_setcolreg(CONSOLE_COLOR_BLACK, 0, 0, 0);
@@ -269,7 +221,23 @@
#endif
console_cols = panel_info.vl_col / VIDEO_FONT_WIDTH;
lcd_init_console(lcd_base, console_rows, console_cols);
- lcd_init_console(lcd_logo(), console_rows, console_cols);
+ if (do_splash) {
+ s = getenv("splashimage");
+ if (s) {
+ do_splash = 0;
+ addr = simple_strtoul(s, NULL, 16);
+ if (lcd_splash(addr) == 0) {
+ lcd_sync();
+ return;
+ }
+ }
+ }
+
+ lcd_logo();
+#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
+ addr = (ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length;
+ lcd_init_console((void *)addr, console_rows, console_cols);
+#endif
lcd_sync();
}
@@ -279,20 +247,11 @@
lcd_clear();
return 0;
}
-
-U_BOOT_CMD(
- cls, 1, 1, do_lcd_clear,
- "clear screen",
- ""
-);
-
-/*----------------------------------------------------------------------*/
+U_BOOT_CMD(cls, 1, 1, do_lcd_clear, "clear screen", "");
static int lcd_init(void *lcdbase)
{
- /* Initialize the lcd controller */
debug("[LCD] Initializing LCD frambuffer at %p\n", lcdbase);
-
lcd_ctrl_init(lcdbase);
/*
@@ -322,10 +281,6 @@
return 0;
}
-
-/************************************************************************/
-/* ** ROM capable initialization part - needed to reserve FB memory */
-/************************************************************************/
/*
* This is called early in the system initialization to grab memory
* for the LCD controller.
@@ -356,8 +311,6 @@
return addr;
}
-/*----------------------------------------------------------------------*/
-
static void lcd_setfgcolor(int color)
{
lcd_color_fg = color;
@@ -368,8 +321,6 @@
return lcd_color_fg;
}
-/*----------------------------------------------------------------------*/
-
static void lcd_setbgcolor(int color)
{
lcd_color_bg = color;
@@ -380,91 +331,30 @@
return lcd_color_bg;
}
-/************************************************************************/
-/* ** Chipset depending Bitmap / Logo stuff... */
-/************************************************************************/
-static inline ushort *configuration_get_cmap(void)
+#ifdef CONFIG_LCD_LOGO
+__weak void lcd_logo_set_cmap(void)
{
-#if defined CONFIG_CPU_PXA
- struct pxafb_info *fbi = &panel_info.pxa;
- return (ushort *)fbi->palette;
-#elif defined(CONFIG_MPC823)
- immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- cpm8xx_t *cp = &(immr->im_cpm);
- return (ushort *)&(cp->lcd_cmap[255 * sizeof(ushort)]);
-#elif defined(CONFIG_ATMEL_LCD)
- return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0));
-#elif !defined(CONFIG_ATMEL_HLCD) && !defined(CONFIG_EXYNOS_FB)
- return panel_info.cmap;
-#elif defined(CONFIG_LCD_LOGO)
- return bmp_logo_palette;
-#else
- return NULL;
-#endif
+ int i;
+ ushort *cmap = configuration_get_cmap();
+
+ for (i = 0; i < ARRAY_SIZE(bmp_logo_palette); ++i)
+ *cmap++ = bmp_logo_palette[i];
}
-#ifdef CONFIG_LCD_LOGO
-void bitmap_plot(int x, int y)
+void lcd_logo_plot(int x, int y)
{
-#ifdef CONFIG_ATMEL_LCD
- uint *cmap = (uint *)bmp_logo_palette;
-#else
- ushort *cmap = (ushort *)bmp_logo_palette;
-#endif
ushort i, j;
- uchar *bmap;
- uchar *fb;
- ushort *fb16;
-#if defined(CONFIG_MPC823)
- immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- cpm8xx_t *cp = &(immr->im_cpm);
-#endif
+ uchar *bmap = &bmp_logo_bitmap[0];
unsigned bpix = NBITS(panel_info.vl_bpix);
+ uchar *fb = (uchar *)(lcd_base + y * lcd_line_length + x * bpix / 8);
+ ushort *fb16;
- debug("Logo: width %d height %d colors %d cmap %d\n",
- BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS,
- ARRAY_SIZE(bmp_logo_palette));
-
- bmap = &bmp_logo_bitmap[0];
- fb = (uchar *)(lcd_base + y * lcd_line_length + x * bpix / 8);
+ debug("Logo: width %d height %d colors %d\n",
+ BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS);
if (bpix < 12) {
- /* Leave room for default color map
- * default case: generic system with no cmap (most likely 16bpp)
- * cmap was set to the source palette, so no change is done.
- * This avoids even more ifdefs in the next stanza
- */
-#if defined(CONFIG_MPC823)
- cmap = (ushort *) &(cp->lcd_cmap[BMP_LOGO_OFFSET * sizeof(ushort)]);
-#elif defined(CONFIG_ATMEL_LCD)
- cmap = (uint *)configuration_get_cmap();
-#else
- cmap = configuration_get_cmap();
-#endif
-
WATCHDOG_RESET();
-
- /* Set color map */
- for (i = 0; i < ARRAY_SIZE(bmp_logo_palette); ++i) {
- ushort colreg = bmp_logo_palette[i];
-#ifdef CONFIG_ATMEL_LCD
- uint lut_entry;
-#ifdef CONFIG_ATMEL_LCD_BGR555
- lut_entry = ((colreg & 0x000F) << 11) |
- ((colreg & 0x00F0) << 2) |
- ((colreg & 0x0F00) >> 7);
-#else /* CONFIG_ATMEL_LCD_RGB565 */
- lut_entry = ((colreg & 0x000F) << 1) |
- ((colreg & 0x00F0) << 3) |
- ((colreg & 0x0F00) << 4);
-#endif
- *(cmap + BMP_LOGO_OFFSET) = lut_entry;
- cmap++;
-#else /* !CONFIG_ATMEL_LCD */
- *cmap++ = colreg;
-#endif /* CONFIG_ATMEL_LCD */
- }
-
+ lcd_logo_set_cmap();
WATCHDOG_RESET();
for (i = 0; i < BMP_LOGO_HEIGHT; ++i) {
@@ -493,16 +383,10 @@
lcd_sync();
}
#else
-static inline void bitmap_plot(int x, int y) {}
+static inline void lcd_logo_plot(int x, int y) {}
#endif /* CONFIG_LCD_LOGO */
-/*----------------------------------------------------------------------*/
#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
-/*
- * Display the BMP file located at address bmp_image.
- * Only uncompressed.
- */
-
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
#define BMP_ALIGN_CENTER 0x7FFF
@@ -523,9 +407,7 @@
}
#endif
-
#ifdef CONFIG_LCD_BMP_RLE8
-
#define BMP_RLE8_ESCAPE 0
#define BMP_RLE8_EOL 0
#define BMP_RLE8_EOBMP 1
@@ -654,32 +536,40 @@
}
#endif
-#if defined(CONFIG_MPC823)
-#define FB_PUT_BYTE(fb, from) *(fb)++ = (255 - *(from)++)
-#else
-#define FB_PUT_BYTE(fb, from) *(fb)++ = *(from)++
-#endif
+__weak void fb_put_byte(uchar **fb, uchar **from)
+{
+ *(*fb)++ = *(*from)++;
+}
#if defined(CONFIG_BMP_16BPP)
-#if defined(CONFIG_ATMEL_LCD_BGR555)
-static inline void fb_put_word(uchar **fb, uchar **from)
-{
- *(*fb)++ = (((*from)[0] & 0x1f) << 2) | ((*from)[1] & 0x03);
- *(*fb)++ = ((*from)[0] & 0xe0) | (((*from)[1] & 0x7c) >> 2);
- *from += 2;
-}
-#else
-static inline void fb_put_word(uchar **fb, uchar **from)
+__weak void fb_put_word(uchar **fb, uchar **from)
{
*(*fb)++ = *(*from)++;
*(*fb)++ = *(*from)++;
}
-#endif
#endif /* CONFIG_BMP_16BPP */
+__weak void lcd_set_cmap(bmp_image_t *bmp, unsigned colors)
+{
+ int i;
+ bmp_color_table_entry_t cte;
+ ushort *cmap = configuration_get_cmap();
+
+ for (i = 0; i < colors; ++i) {
+ cte = bmp->color_table[i];
+ *cmap = (((cte.red) << 8) & 0xf800) |
+ (((cte.green) << 3) & 0x07e0) |
+ (((cte.blue) >> 3) & 0x001f);
+#if defined(CONFIG_MPC823)
+ cmap--;
+#else
+ cmap++;
+#endif
+ }
+}
+
int lcd_display_bitmap(ulong bmp_image, int x, int y)
{
- ushort *cmap = NULL;
ushort *cmap_base = NULL;
ushort i, j;
uchar *fb;
@@ -727,29 +617,8 @@
debug("Display-bmp: %d x %d with %d colors\n",
(int)width, (int)height, (int)colors);
- if (bmp_bpix == 8) {
- cmap = configuration_get_cmap();
- cmap_base = cmap;
-
- /* Set color map */
- for (i = 0; i < colors; ++i) {
- bmp_color_table_entry_t cte = bmp->color_table[i];
-#if !defined(CONFIG_ATMEL_LCD)
- ushort colreg =
- ( ((cte.red) << 8) & 0xf800) |
- ( ((cte.green) << 3) & 0x07e0) |
- ( ((cte.blue) >> 3) & 0x001f) ;
- *cmap = colreg;
-#if defined(CONFIG_MPC823)
- cmap--;
-#else
- cmap++;
-#endif
-#else /* CONFIG_ATMEL_LCD */
- lcd_setcolreg(i, cte.red, cte.green, cte.blue);
-#endif
- }
- }
+ if (bmp_bpix == 8)
+ lcd_set_cmap(bmp, colors);
padded_width = (width & 0x3 ? (width & ~0x3) + 4 : width);
@@ -768,8 +637,9 @@
(y + height - 1) * lcd_line_length + x * bpix / 8);
switch (bmp_bpix) {
- case 1: /* pass through */
+ case 1:
case 8: {
+ cmap_base = configuration_get_cmap();
#ifdef CONFIG_LCD_BMP_RLE8
u32 compression = get_unaligned_le32(&bmp->header.compression);
if (compression == BMP_BI_RLE8) {
@@ -792,7 +662,7 @@
WATCHDOG_RESET();
for (j = 0; j < width; j++) {
if (bpix != 16) {
- FB_PUT_BYTE(fb, bmap);
+ fb_put_byte(&fb, &bmap);
} else {
*(uint16_t *)fb = cmap_base[*(bmap++)];
fb += sizeof(uint16_t) / sizeof(*fb);
@@ -850,42 +720,15 @@
}
#endif
-static void *lcd_logo(void)
+static void lcd_logo(void)
{
-#ifdef CONFIG_SPLASH_SCREEN
- char *s;
- ulong addr;
- static int do_splash = 1;
-
- if (do_splash && (s = getenv("splashimage")) != NULL) {
- int x = 0, y = 0;
- do_splash = 0;
-
- if (splash_screen_prepare())
- return (void *)lcd_base;
-
- addr = simple_strtoul (s, NULL, 16);
-
- splash_get_pos(&x, &y);
-
- if (bmp_display(addr, x, y) == 0)
- return (void *)lcd_base;
- }
-#endif /* CONFIG_SPLASH_SCREEN */
-
- bitmap_plot(0, 0);
+ lcd_logo_plot(0, 0);
#ifdef CONFIG_LCD_INFO
lcd_set_col(LCD_INFO_X / VIDEO_FONT_WIDTH);
lcd_set_row(LCD_INFO_Y / VIDEO_FONT_HEIGHT);
lcd_show_board_info();
#endif /* CONFIG_LCD_INFO */
-
-#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
- return (void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length);
-#else
- return (void *)lcd_base;
-#endif /* CONFIG_LCD_LOGO && !defined(CONFIG_LCD_INFO_BELOW_LOGO) */
}
#ifdef CONFIG_SPLASHIMAGE_GUARD
@@ -921,48 +764,3 @@
{
return panel_info.vl_row;
}
-
-#if defined(CONFIG_LCD_DT_SIMPLEFB)
-static int lcd_dt_simplefb_configure_node(void *blob, int off)
-{
-#if LCD_BPP == LCD_COLOR16
- return fdt_setup_simplefb_node(blob, off, gd->fb_base,
- panel_info.vl_col, panel_info.vl_row,
- panel_info.vl_col * 2, "r5g6b5");
-#else
- return -1;
-#endif
-}
-
-int lcd_dt_simplefb_add_node(void *blob)
-{
- static const char compat[] = "simple-framebuffer";
- static const char disabled[] = "disabled";
- int off, ret;
-
- off = fdt_add_subnode(blob, 0, "framebuffer");
- if (off < 0)
- return -1;
-
- ret = fdt_setprop(blob, off, "status", disabled, sizeof(disabled));
- if (ret < 0)
- return -1;
-
- ret = fdt_setprop(blob, off, "compatible", compat, sizeof(compat));
- if (ret < 0)
- return -1;
-
- return lcd_dt_simplefb_configure_node(blob, off);
-}
-
-int lcd_dt_simplefb_enable_existing_node(void *blob)
-{
- int off;
-
- off = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer");
- if (off < 0)
- return -1;
-
- return lcd_dt_simplefb_configure_node(blob, off);
-}
-#endif
diff --git a/common/lcd_simplefb.c b/common/lcd_simplefb.c
new file mode 100644
index 0000000..8db2add
--- /dev/null
+++ b/common/lcd_simplefb.c
@@ -0,0 +1,59 @@
+/*
+ * Simplefb device tree support
+ *
+ * (C) Copyright 2015
+ * Stephen Warren <swarren@wwwdotorg.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <lcd.h>
+#include <fdt_support.h>
+#include <libfdt.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int lcd_dt_simplefb_configure_node(void *blob, int off)
+{
+#if LCD_BPP == LCD_COLOR16
+ int vl_col = lcd_get_pixel_width();
+ int vl_row = lcd_get_pixel_height();
+ return fdt_setup_simplefb_node(blob, off, gd->fb_base, vl_col, vl_row,
+ vl_col * 2, "r5g6b5");
+#else
+ return -1;
+#endif
+}
+
+int lcd_dt_simplefb_add_node(void *blob)
+{
+ static const char compat[] = "simple-framebuffer";
+ static const char disabled[] = "disabled";
+ int off, ret;
+
+ off = fdt_add_subnode(blob, 0, "framebuffer");
+ if (off < 0)
+ return -1;
+
+ ret = fdt_setprop(blob, off, "status", disabled, sizeof(disabled));
+ if (ret < 0)
+ return -1;
+
+ ret = fdt_setprop(blob, off, "compatible", compat, sizeof(compat));
+ if (ret < 0)
+ return -1;
+
+ return lcd_dt_simplefb_configure_node(blob, off);
+}
+
+int lcd_dt_simplefb_enable_existing_node(void *blob)
+{
+ int off;
+
+ off = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer");
+ if (off < 0)
+ return -1;
+
+ return lcd_dt_simplefb_configure_node(blob, off);
+}
diff --git a/common/splash.c b/common/splash.c
index 144fb10..561d35b 100644
--- a/common/splash.c
+++ b/common/splash.c
@@ -22,6 +22,7 @@
#include <common.h>
#include <splash.h>
+#include <lcd.h>
__weak int splash_screen_prepare(void)
{
@@ -50,3 +51,18 @@
}
}
#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
+
+#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_LCD)
+int lcd_splash(ulong addr)
+{
+ int x = 0, y = 0, ret;
+
+ ret = splash_screen_prepare();
+ if (ret)
+ return ret;
+
+ splash_get_pos(&x, &y);
+
+ return bmp_display(addr, x, y);
+}
+#endif
diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c
index 935ae42..0ce2370 100644
--- a/drivers/video/atmel_hlcdfb.c
+++ b/drivers/video/atmel_hlcdfb.c
@@ -13,6 +13,10 @@
#include <lcd.h>
#include <atmel_hlcdc.h>
+#if defined(CONFIG_LCD_LOGO)
+#include <bmp_logo.h>
+#endif
+
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8
@@ -37,6 +41,15 @@
panel_info.mmio + ATMEL_LCDC_LUT(regno));
}
+ushort *configuration_get_cmap(void)
+{
+#if defined(CONFIG_LCD_LOGO)
+ return bmp_logo_palette;
+#else
+ return NULL;
+#endif
+}
+
void lcd_ctrl_init(void *lcdbase)
{
unsigned long value;
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 3cf008c..5add136 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -11,6 +11,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <lcd.h>
+#include <bmp_layout.h>
#include <atmel_lcdc.h>
/* configurable parameters */
@@ -29,6 +30,46 @@
#define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg))
#define lcdc_writel(mmio, reg, val) __raw_writel((val), (mmio)+(reg))
+ushort *configuration_get_cmap(void)
+{
+ return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0));
+}
+
+#if defined(CONFIG_BMP_16BPP) && defined(CONFIG_ATMEL_LCD_BGR555)
+void fb_put_word(uchar **fb, uchar **from)
+{
+ *(*fb)++ = (((*from)[0] & 0x1f) << 2) | ((*from)[1] & 0x03);
+ *(*fb)++ = ((*from)[0] & 0xe0) | (((*from)[1] & 0x7c) >> 2);
+ *from += 2;
+}
+#endif
+
+#ifdef CONFIG_LCD_LOGO
+#include <bmp_logo.h>
+void lcd_logo_set_cmap(void)
+{
+ int i;
+ uint lut_entry;
+ ushort colreg;
+ uint *cmap = (uint *)configuration_get_cmap();
+
+ for (i = 0; i < BMP_LOGO_COLORS; ++i) {
+ colreg = bmp_logo_palette[i];
+#ifdef CONFIG_ATMEL_LCD_BGR555
+ lut_entry = ((colreg & 0x000F) << 11) |
+ ((colreg & 0x00F0) << 2) |
+ ((colreg & 0x0F00) >> 7);
+#else
+ lut_entry = ((colreg & 0x000F) << 1) |
+ ((colreg & 0x00F0) << 3) |
+ ((colreg & 0x0F00) << 4);
+#endif
+ *(cmap + BMP_LOGO_OFFSET) = lut_entry;
+ cmap++;
+ }
+}
+#endif
+
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
{
#if defined(CONFIG_ATMEL_LCD_BGR555)
@@ -40,6 +81,16 @@
#endif
}
+void lcd_set_cmap(bmp_image_t *bmp, unsigned colors)
+{
+ int i;
+
+ for (i = 0; i < colors; ++i) {
+ bmp_color_table_entry_t cte = bmp->color_table[i];
+ lcd_setcolreg(i, cte.red, cte.green, cte.blue);
+ }
+}
+
void lcd_ctrl_init(void *lcdbase)
{
unsigned long value;
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index be35b98..c5d7330 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -37,6 +37,15 @@
};
#endif
+ushort *configuration_get_cmap(void)
+{
+#if defined(CONFIG_LCD_LOGO)
+ return bmp_logo_palette;
+#else
+ return NULL;
+#endif
+}
+
static void exynos_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
{
unsigned long palette_size;
diff --git a/drivers/video/mpc8xx_lcd.c b/drivers/video/mpc8xx_lcd.c
index add7215..faa58c0 100644
--- a/drivers/video/mpc8xx_lcd.c
+++ b/drivers/video/mpc8xx_lcd.c
@@ -357,6 +357,35 @@
/*----------------------------------------------------------------------*/
+ushort *configuration_get_cmap(void)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ cpm8xx_t *cp = &(immr->im_cpm);
+ return (ushort *)&(cp->lcd_cmap[255 * sizeof(ushort)]);
+}
+
+#if defined(CONFIG_MPC823)
+void fb_put_byte(uchar **fb, uchar **from)
+{
+ *(*fb)++ = (255 - *(*from)++);
+}
+#endif
+
+#ifdef CONFIG_LCD_LOGO
+#include <bmp_logo.h>
+void lcd_logo_set_cmap(void)
+{
+ int i;
+ ushort *cmap;
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ cpm8xx_t *cp = &(immr->im_cpm);
+ cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET * sizeof(ushort)]);
+
+ for (i = 0; i < BMP_LOGO_COLORS; ++i)
+ *cmap++ = bmp_logo_palette[i];
+}
+#endif
+
void lcd_enable (void)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
diff --git a/drivers/video/pxa_lcd.c b/drivers/video/pxa_lcd.c
index f66f615..04105d4 100644
--- a/drivers/video/pxa_lcd.c
+++ b/drivers/video/pxa_lcd.c
@@ -342,6 +342,12 @@
/* --------------- PXA chipset specific functions ------------------- */
/************************************************************************/
+ushort *configuration_get_cmap(void)
+{
+ struct pxafb_info *fbi = &panel_info.pxa;
+ return (ushort *)fbi->palette;
+}
+
void lcd_ctrl_init (void *lcdbase)
{
pxafb_init_mem(lcdbase, &panel_info);
diff --git a/include/atmel_lcd.h b/include/atmel_lcd.h
new file mode 100644
index 0000000..fa8aa29
--- /dev/null
+++ b/include/atmel_lcd.h
@@ -0,0 +1,38 @@
+/*
+ * atmel_lcd.h - Atmel LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ATMEL_LCD_H_
+#define _ATMEL_LCD_H_
+
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ u_long vl_clk; /* pixel clock in ps */
+
+ /* LCD configuration register */
+ u_long vl_sync; /* Horizontal / vertical sync */
+ u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+ u_long vl_tft; /* 0 = passive, 1 = TFT */
+ u_long vl_cont_pol_low; /* contrast polarity is low */
+ u_long vl_clk_pol; /* clock polarity */
+
+ /* Horizontal control register. */
+ u_long vl_hsync_len; /* Length of horizontal sync */
+ u_long vl_left_margin; /* Time from sync to picture */
+ u_long vl_right_margin; /* Time from picture to sync */
+
+ /* Vertical control register. */
+ u_long vl_vsync_len; /* Length of vertical sync */
+ u_long vl_upper_margin; /* Time from sync to picture */
+ u_long vl_lower_margin; /* Time from picture to sync */
+
+ u_long mmio; /* Memory mapped registers */
+} vidinfo_t;
+
+#endif
diff --git a/include/exynos_lcd.h b/include/exynos_lcd.h
new file mode 100644
index 0000000..cf389da
--- /dev/null
+++ b/include/exynos_lcd.h
@@ -0,0 +1,81 @@
+/*
+ * exynos_lcd.h - Exynos LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _EXYNOS_LCD_H_
+#define _EXYNOS_LCD_H_
+
+enum {
+ FIMD_RGB_INTERFACE = 1,
+ FIMD_CPU_INTERFACE = 2,
+};
+
+enum exynos_fb_rgb_mode_t {
+ MODE_RGB_P = 0,
+ MODE_BGR_P = 1,
+ MODE_RGB_S = 2,
+ MODE_BGR_S = 3,
+};
+
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ ushort vl_width; /* Width of display area in millimeters */
+ ushort vl_height; /* Height of display area in millimeters */
+
+ /* LCD configuration register */
+ u_char vl_freq; /* Frequency */
+ u_char vl_clkp; /* Clock polarity */
+ u_char vl_oep; /* Output Enable polarity */
+ u_char vl_hsp; /* Horizontal Sync polarity */
+ u_char vl_vsp; /* Vertical Sync polarity */
+ u_char vl_dp; /* Data polarity */
+ u_char vl_bpix; /* Bits per pixel */
+
+ /* Horizontal control register. Timing from data sheet */
+ u_char vl_hspw; /* Horz sync pulse width */
+ u_char vl_hfpd; /* Wait before of line */
+ u_char vl_hbpd; /* Wait end of line */
+
+ /* Vertical control register. */
+ u_char vl_vspw; /* Vertical sync pulse width */
+ u_char vl_vfpd; /* Wait before of frame */
+ u_char vl_vbpd; /* Wait end of frame */
+ u_char vl_cmd_allow_len; /* Wait end of frame */
+
+ unsigned int win_id;
+ unsigned int init_delay;
+ unsigned int power_on_delay;
+ unsigned int reset_delay;
+ unsigned int interface_mode;
+ unsigned int mipi_enabled;
+ unsigned int dp_enabled;
+ unsigned int cs_setup;
+ unsigned int wr_setup;
+ unsigned int wr_act;
+ unsigned int wr_hold;
+ unsigned int logo_on;
+ unsigned int logo_width;
+ unsigned int logo_height;
+ int logo_x_offset;
+ int logo_y_offset;
+ unsigned long logo_addr;
+ unsigned int rgb_mode;
+ unsigned int resolution;
+
+ /* parent clock name(MPLL, EPLL or VPLL) */
+ unsigned int pclk_name;
+ /* ratio value for source clock from parent clock. */
+ unsigned int sclk_div;
+
+ unsigned int dual_lcd_enabled;
+} vidinfo_t;
+
+void init_panel_info(vidinfo_t *vid);
+
+#endif
diff --git a/include/fdt_simplefb.h b/include/fdt_simplefb.h
new file mode 100644
index 0000000..8c89a19
--- /dev/null
+++ b/include/fdt_simplefb.h
@@ -0,0 +1,14 @@
+/*
+ * Simplefb device tree support
+ *
+ * (C) Copyright 2015
+ * Stephen Warren <swarren@wwwdotorg.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _FDT_SIMPLEFB_H_
+#define _FDT_SIMPLEFB_H_
+int lcd_dt_simplefb_add_node(void *blob);
+int lcd_dt_simplefb_enable_existing_node(void *blob);
+#endif
diff --git a/include/lcd.h b/include/lcd.h
index 160f940..f049fd3 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -13,21 +13,19 @@
#ifndef _LCD_H_
#define _LCD_H_
#include <lcd_console.h>
+#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+#include <bmp_layout.h>
+#include <asm/byteorder.h>
+#endif
extern char lcd_is_enabled;
-
extern int lcd_line_length;
-
extern struct vidinfo panel_info;
void lcd_ctrl_init(void *lcdbase);
void lcd_enable(void);
-
-/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue);
-void lcd_initcolregs(void);
-/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp,
void **alloc_addr);
int bmp_display(ulong addr, int x, int y);
@@ -41,227 +39,38 @@
void lcd_set_flush_dcache(int flush);
#if defined CONFIG_MPC823
-/*
- * LCD controller stucture for MPC823 CPU
- */
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- ushort vl_width; /* Width of display area in millimeters */
- ushort vl_height; /* Height of display area in millimeters */
-
- /* LCD configuration register */
- u_char vl_clkp; /* Clock polarity */
- u_char vl_oep; /* Output Enable polarity */
- u_char vl_hsp; /* Horizontal Sync polarity */
- u_char vl_vsp; /* Vertical Sync polarity */
- u_char vl_dp; /* Data polarity */
- u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
- u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
- u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
- u_char vl_clor; /* Color, 0 = mono, 1 = color */
- u_char vl_tft; /* 0 = passive, 1 = TFT */
-
- /* Horizontal control register. Timing from data sheet */
- ushort vl_wbl; /* Wait between lines */
-
- /* Vertical control register */
- u_char vl_vpw; /* Vertical sync pulse width */
- u_char vl_lcdac; /* LCD AC timing */
- u_char vl_wbf; /* Wait between frames */
-} vidinfo_t;
-
+#include <mpc823_lcd.h>
#elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
defined CONFIG_CPU_MONAHANS
-/*
- * PXA LCD DMA descriptor
- */
-struct pxafb_dma_descriptor {
- u_long fdadr; /* Frame descriptor address register */
- u_long fsadr; /* Frame source address register */
- u_long fidr; /* Frame ID register */
- u_long ldcmd; /* Command register */
-};
-
-/*
- * PXA LCD info
- */
-struct pxafb_info {
-
- /* Misc registers */
- u_long reg_lccr3;
- u_long reg_lccr2;
- u_long reg_lccr1;
- u_long reg_lccr0;
- u_long fdadr0;
- u_long fdadr1;
-
- /* DMA descriptors */
- struct pxafb_dma_descriptor * dmadesc_fblow;
- struct pxafb_dma_descriptor * dmadesc_fbhigh;
- struct pxafb_dma_descriptor * dmadesc_palette;
-
- u_long screen; /* physical address of frame buffer */
- u_long palette; /* physical address of palette memory */
- u_int palette_size;
-};
-
-/*
- * LCD controller stucture for PXA CPU
- */
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- ushort vl_width; /* Width of display area in millimeters */
- ushort vl_height; /* Height of display area in millimeters */
-
- /* LCD configuration register */
- u_char vl_clkp; /* Clock polarity */
- u_char vl_oep; /* Output Enable polarity */
- u_char vl_hsp; /* Horizontal Sync polarity */
- u_char vl_vsp; /* Vertical Sync polarity */
- u_char vl_dp; /* Data polarity */
- u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
- u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
- u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
- u_char vl_clor; /* Color, 0 = mono, 1 = color */
- u_char vl_tft; /* 0 = passive, 1 = TFT */
-
- /* Horizontal control register. Timing from data sheet */
- ushort vl_hpw; /* Horz sync pulse width */
- u_char vl_blw; /* Wait before of line */
- u_char vl_elw; /* Wait end of line */
-
- /* Vertical control register. */
- u_char vl_vpw; /* Vertical sync pulse width */
- u_char vl_bfw; /* Wait before of frame */
- u_char vl_efw; /* Wait end of frame */
-
- /* PXA LCD controller params */
- struct pxafb_info pxa;
-} vidinfo_t;
-
+#include <pxa_lcd.h>
#elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD)
-
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- u_long vl_clk; /* pixel clock in ps */
-
- /* LCD configuration register */
- u_long vl_sync; /* Horizontal / vertical sync */
- u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
- u_long vl_tft; /* 0 = passive, 1 = TFT */
- u_long vl_cont_pol_low; /* contrast polarity is low */
- u_long vl_clk_pol; /* clock polarity */
-
- /* Horizontal control register. */
- u_long vl_hsync_len; /* Length of horizontal sync */
- u_long vl_left_margin; /* Time from sync to picture */
- u_long vl_right_margin; /* Time from picture to sync */
-
- /* Vertical control register. */
- u_long vl_vsync_len; /* Length of vertical sync */
- u_long vl_upper_margin; /* Time from sync to picture */
- u_long vl_lower_margin; /* Time from picture to sync */
-
- u_long mmio; /* Memory mapped registers */
-} vidinfo_t;
-
+#include <atmel_lcd.h>
#elif defined(CONFIG_EXYNOS_FB)
-
-enum {
- FIMD_RGB_INTERFACE = 1,
- FIMD_CPU_INTERFACE = 2,
-};
-
-enum exynos_fb_rgb_mode_t {
- MODE_RGB_P = 0,
- MODE_BGR_P = 1,
- MODE_RGB_S = 2,
- MODE_BGR_S = 3,
-};
-
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- ushort vl_width; /* Width of display area in millimeters */
- ushort vl_height; /* Height of display area in millimeters */
-
- /* LCD configuration register */
- u_char vl_freq; /* Frequency */
- u_char vl_clkp; /* Clock polarity */
- u_char vl_oep; /* Output Enable polarity */
- u_char vl_hsp; /* Horizontal Sync polarity */
- u_char vl_vsp; /* Vertical Sync polarity */
- u_char vl_dp; /* Data polarity */
- u_char vl_bpix; /* Bits per pixel */
-
- /* Horizontal control register. Timing from data sheet */
- u_char vl_hspw; /* Horz sync pulse width */
- u_char vl_hfpd; /* Wait before of line */
- u_char vl_hbpd; /* Wait end of line */
-
- /* Vertical control register. */
- u_char vl_vspw; /* Vertical sync pulse width */
- u_char vl_vfpd; /* Wait before of frame */
- u_char vl_vbpd; /* Wait end of frame */
- u_char vl_cmd_allow_len; /* Wait end of frame */
-
- unsigned int win_id;
- unsigned int init_delay;
- unsigned int power_on_delay;
- unsigned int reset_delay;
- unsigned int interface_mode;
- unsigned int mipi_enabled;
- unsigned int dp_enabled;
- unsigned int cs_setup;
- unsigned int wr_setup;
- unsigned int wr_act;
- unsigned int wr_hold;
- unsigned int logo_on;
- unsigned int logo_width;
- unsigned int logo_height;
- int logo_x_offset;
- int logo_y_offset;
- unsigned long logo_addr;
- unsigned int rgb_mode;
- unsigned int resolution;
-
- /* parent clock name(MPLL, EPLL or VPLL) */
- unsigned int pclk_name;
- /* ratio value for source clock from parent clock. */
- unsigned int sclk_div;
-
- unsigned int dual_lcd_enabled;
-} vidinfo_t;
-
-void init_panel_info(vidinfo_t *vid);
-
+#include <exynos_lcd.h>
#else
-
typedef struct vidinfo {
ushort vl_col; /* Number of columns (i.e. 160) */
ushort vl_row; /* Number of rows (i.e. 100) */
-
u_char vl_bpix; /* Bits per pixel, 0 = 1 */
-
ushort *cmap; /* Pointer to the colormap */
-
void *priv; /* Pointer to driver-specific data */
} vidinfo_t;
-#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */
+static __maybe_unused ushort *configuration_get_cmap(void)
+{
+ return panel_info.cmap;
+}
+#endif
+
+ushort *configuration_get_cmap(void);
extern vidinfo_t panel_info;
-/* Video functions */
-
-void lcd_putc(const char c);
-void lcd_puts(const char *s);
-void lcd_printf(const char *fmt, ...);
-void lcd_clear(void);
-int lcd_display_bitmap(ulong bmp_image, int x, int y);
+void lcd_putc(const char c);
+void lcd_puts(const char *s);
+void lcd_printf(const char *fmt, ...);
+void lcd_clear(void);
+int lcd_display_bitmap(ulong bmp_image, int x, int y);
/**
* Get the width of the LCD in pixels
@@ -319,20 +128,9 @@
/* Return the size of the LCD frame buffer, and the line length */
int lcd_get_size(int *line_length);
-int lcd_dt_simplefb_add_node(void *blob);
-int lcd_dt_simplefb_enable_existing_node(void *blob);
-
/* Update the LCD / flush the cache */
void lcd_sync(void);
-/************************************************************************/
-/* ** BITMAP DISPLAY SUPPORT */
-/************************************************************************/
-#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
-# include <bmp_layout.h>
-# include <asm/byteorder.h>
-#endif
-
/*
* Information about displays we are using. This is for configuring
* the LCD controller and memory allocation. Someone has to know what
@@ -347,38 +145,32 @@
#define LCD_COLOR8 3
#define LCD_COLOR16 4
#define LCD_COLOR32 5
-/*----------------------------------------------------------------------*/
+
#if defined(CONFIG_LCD_INFO_BELOW_LOGO)
-# define LCD_INFO_X 0
-# define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
+#define LCD_INFO_X 0
+#define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
#elif defined(CONFIG_LCD_LOGO)
-# define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
-# define LCD_INFO_Y VIDEO_FONT_HEIGHT
+#define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
+#define LCD_INFO_Y VIDEO_FONT_HEIGHT
#else
-# define LCD_INFO_X VIDEO_FONT_WIDTH
-# define LCD_INFO_Y VIDEO_FONT_HEIGHT
+#define LCD_INFO_X VIDEO_FONT_WIDTH
+#define LCD_INFO_Y VIDEO_FONT_HEIGHT
#endif
/* Default to 8bpp if bit depth not specified */
#ifndef LCD_BPP
-# define LCD_BPP LCD_COLOR8
+#define LCD_BPP LCD_COLOR8
#endif
+
#ifndef LCD_DF
-# define LCD_DF 1
+#define LCD_DF 1
#endif
/* Calculate nr. of bits per pixel and nr. of colors */
#define NBITS(bit_code) (1 << (bit_code))
#define NCOLORS(bit_code) (1 << NBITS(bit_code))
-/************************************************************************/
-/* ** CONSOLE CONSTANTS */
-/************************************************************************/
#if LCD_BPP == LCD_COLOR8
-
-/*
- * 8bpp color definitions
- */
# define CONSOLE_COLOR_BLACK 0
# define CONSOLE_COLOR_RED 1
# define CONSOLE_COLOR_GREEN 2
@@ -387,38 +179,25 @@
# define CONSOLE_COLOR_MAGENTA 5
# define CONSOLE_COLOR_CYAN 6
# define CONSOLE_COLOR_GREY 14
-# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
-
+# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
#elif LCD_BPP == LCD_COLOR32
-/*
- * 32bpp color definitions
- */
-# define CONSOLE_COLOR_RED 0x00ff0000
-# define CONSOLE_COLOR_GREEN 0x0000ff00
-# define CONSOLE_COLOR_YELLOW 0x00ffff00
-# define CONSOLE_COLOR_BLUE 0x000000ff
-# define CONSOLE_COLOR_MAGENTA 0x00ff00ff
-# define CONSOLE_COLOR_CYAN 0x0000ffff
-# define CONSOLE_COLOR_GREY 0x00aaaaaa
-# define CONSOLE_COLOR_BLACK 0x00000000
-# define CONSOLE_COLOR_WHITE 0x00ffffff /* Must remain last / highest*/
-# define NBYTES(bit_code) (NBITS(bit_code) >> 3)
-
-#else
-
-/*
- * 16bpp color definitions
- */
-# define CONSOLE_COLOR_BLACK 0x0000
-# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
-
+#define CONSOLE_COLOR_RED 0x00ff0000
+#define CONSOLE_COLOR_GREEN 0x0000ff00
+#define CONSOLE_COLOR_YELLOW 0x00ffff00
+#define CONSOLE_COLOR_BLUE 0x000000ff
+#define CONSOLE_COLOR_MAGENTA 0x00ff00ff
+#define CONSOLE_COLOR_CYAN 0x0000ffff
+#define CONSOLE_COLOR_GREY 0x00aaaaaa
+#define CONSOLE_COLOR_BLACK 0x00000000
+#define CONSOLE_COLOR_WHITE 0x00ffffff /* Must remain last / highest */
+#define NBYTES(bit_code) (NBITS(bit_code) >> 3)
+#else /* 16bpp color definitions */
+#define CONSOLE_COLOR_BLACK 0x0000
+#define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
#endif /* color definitions */
-/************************************************************************/
#ifndef PAGE_SIZE
-# define PAGE_SIZE 4096
+#define PAGE_SIZE 4096
#endif
-/************************************************************************/
-
#endif /* _LCD_H_ */
diff --git a/include/mpc823_lcd.h b/include/mpc823_lcd.h
new file mode 100644
index 0000000..7e210e3
--- /dev/null
+++ b/include/mpc823_lcd.h
@@ -0,0 +1,43 @@
+/*
+ * mpc823_lcd.h - MPC823 LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _MPC823_LCD_H_
+#define _MPC823_LCD_H_
+
+/*
+ * LCD controller stucture for MPC823 CPU
+ */
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ ushort vl_width; /* Width of display area in millimeters */
+ ushort vl_height; /* Height of display area in millimeters */
+
+ /* LCD configuration register */
+ u_char vl_clkp; /* Clock polarity */
+ u_char vl_oep; /* Output Enable polarity */
+ u_char vl_hsp; /* Horizontal Sync polarity */
+ u_char vl_vsp; /* Vertical Sync polarity */
+ u_char vl_dp; /* Data polarity */
+ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
+ u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
+ u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
+ u_char vl_clor; /* Color, 0 = mono, 1 = color */
+ u_char vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. Timing from data sheet */
+ ushort vl_wbl; /* Wait between lines */
+
+ /* Vertical control register */
+ u_char vl_vpw; /* Vertical sync pulse width */
+ u_char vl_lcdac; /* LCD AC timing */
+ u_char vl_wbf; /* Wait between frames */
+} vidinfo_t;
+
+#endif
diff --git a/include/pxa_lcd.h b/include/pxa_lcd.h
new file mode 100644
index 0000000..723f6ab
--- /dev/null
+++ b/include/pxa_lcd.h
@@ -0,0 +1,80 @@
+/*
+ * pxa_lcd.h - PXA LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PXA_LCD_H_
+#define _PXA_LCD_H_
+
+/*
+ * PXA LCD DMA descriptor
+ */
+struct pxafb_dma_descriptor {
+ u_long fdadr; /* Frame descriptor address register */
+ u_long fsadr; /* Frame source address register */
+ u_long fidr; /* Frame ID register */
+ u_long ldcmd; /* Command register */
+};
+
+/*
+ * PXA LCD info
+ */
+struct pxafb_info {
+ /* Misc registers */
+ u_long reg_lccr3;
+ u_long reg_lccr2;
+ u_long reg_lccr1;
+ u_long reg_lccr0;
+ u_long fdadr0;
+ u_long fdadr1;
+
+ /* DMA descriptors */
+ struct pxafb_dma_descriptor *dmadesc_fblow;
+ struct pxafb_dma_descriptor *dmadesc_fbhigh;
+ struct pxafb_dma_descriptor *dmadesc_palette;
+
+ u_long screen; /* physical address of frame buffer */
+ u_long palette; /* physical address of palette memory */
+ u_int palette_size;
+};
+
+/*
+ * LCD controller stucture for PXA CPU
+ */
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ ushort vl_width; /* Width of display area in millimeters */
+ ushort vl_height; /* Height of display area in millimeters */
+
+ /* LCD configuration register */
+ u_char vl_clkp; /* Clock polarity */
+ u_char vl_oep; /* Output Enable polarity */
+ u_char vl_hsp; /* Horizontal Sync polarity */
+ u_char vl_vsp; /* Vertical Sync polarity */
+ u_char vl_dp; /* Data polarity */
+ u_char vl_bpix;/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+ u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
+ u_char vl_splt;/* Split display, 0 = single-scan, 1 = dual-scan */
+ u_char vl_clor; /* Color, 0 = mono, 1 = color */
+ u_char vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. Timing from data sheet */
+ ushort vl_hpw; /* Horz sync pulse width */
+ u_char vl_blw; /* Wait before of line */
+ u_char vl_elw; /* Wait end of line */
+
+ /* Vertical control register. */
+ u_char vl_vpw; /* Vertical sync pulse width */
+ u_char vl_bfw; /* Wait before of frame */
+ u_char vl_efw; /* Wait end of frame */
+
+ /* PXA LCD controller params */
+ struct pxafb_info pxa;
+} vidinfo_t;
+
+#endif
diff --git a/include/splash.h b/include/splash.h
index a60e895..7ae7a68 100644
--- a/include/splash.h
+++ b/include/splash.h
@@ -22,6 +22,8 @@
#ifndef _SPLASH_H_
#define _SPLASH_H_
+#include <errno.h>
+
enum splash_storage {
SPLASH_STORAGE_NAND,
SPLASH_STORAGE_SF,
@@ -42,6 +44,15 @@
static inline void splash_get_pos(int *x, int *y) { }
#endif
+#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_LCD)
+int lcd_splash(ulong addr);
+#else
+static inline int lcd_splash(ulong addr)
+{
+ return -ENOSYS;
+}
+#endif
+
#define BMP_ALIGN_CENTER 0x7FFF
#endif