ARM: rmobile: Convert TPL to SPL
There is currently no use for building the SPL anymore, since the
SPI loader can easily be replaced by TPL and TPL does load U-Boot
directly. Upgrade TPL to SPL and replace what used to be SPL with
it. This way we build the U-Boot sources only twice, not thrice.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/configs/stout_defconfig b/configs/stout_defconfig
index a839f55..c933fbf 100644
--- a/configs/stout_defconfig
+++ b/configs/stout_defconfig
@@ -1,42 +1,29 @@
CONFIG_ARM=y
CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_RMOBILE=y
CONFIG_SYS_TEXT_BASE=0x50000000
-CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_R8A7790=y
CONFIG_TARGET_STOUT=y
-CONFIG_TPL_TEXT_BASE=0xe6300000
-CONFIG_TPL_MAX_SIZE=16384
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="r8a7790-stout-u-boot"
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_TPL=y
-CONFIG_TPL_BOARD_INIT=y
-CONFIG_TPL_NEEDS_SEPARATE_TEXT_BASE=y
-CONFIG_TPL_RAM_SUPPORT=y
-CONFIG_TPL_RAM_DEVICE=y
-CONFIG_TPL_SERIAL_SUPPORT=y
-CONFIG_TPL_SPI_FLASH_SUPPORT=y
-CONFIG_TPL_SPI_LOAD=y
-CONFIG_TPL_SPI_SUPPORT=y
-CONFIG_TPL_YMODEM_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
@@ -59,14 +46,9 @@
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
-CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas power-domains"
CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SPL_OF_TRANSLATE=y
CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_CLK_RENESAS=y
CONFIG_DM_GPIO=y
CONFIG_RCAR_GPIO=y
@@ -85,12 +67,10 @@
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
-CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
-# CONFIG_TPL_DM_SERIAL is not set
CONFIG_SCIF_CONSOLE=y
CONFIG_SH_QSPI=y
CONFIG_USB=y