| if ARCH_AT91 |
| |
| config AT91FAMILY |
| def_bool y |
| |
| config AT91SAM9260 |
| bool |
| select CPU_ARM926EJS |
| |
| config AT91SAM9G20 |
| bool |
| select CPU_ARM926EJS |
| |
| config AT91SAM9XE |
| bool |
| select CPU_ARM926EJS |
| |
| config AT91SAM9261 |
| bool |
| select CPU_ARM926EJS |
| |
| config AT91SAM9263 |
| bool |
| select CPU_ARM926EJS |
| |
| config AT91SAM9G45 |
| bool |
| select CPU_ARM926EJS |
| |
| config AT91SAM9M10G45 |
| bool |
| select CPU_ARM926EJS |
| |
| config AT91SAM9N12 |
| bool |
| select CPU_ARM926EJS |
| |
| config AT91SAM9RL |
| bool |
| select CPU_ARM926EJS |
| |
| config AT91SAM9X5 |
| bool |
| select CPU_ARM926EJS |
| |
| config SAM9X60 |
| bool |
| select CPU_ARM926EJS |
| |
| config SAMA7G5 |
| bool |
| select CPU_V7A |
| select AT91RESET_EXTRST |
| |
| config SAMA5D2 |
| bool |
| select CPU_V7A |
| select ATMEL_SFR |
| |
| config SAMA5D3 |
| bool |
| select CPU_V7A |
| |
| config SAMA5D4 |
| bool |
| select CPU_V7A |
| select ATMEL_SFR |
| |
| choice |
| prompt "Atmel AT91 board select" |
| optional |
| |
| config TARGET_AT91SAM9260EK |
| bool "Atmel at91sam9260 reference board" |
| select AT91SAM9260 |
| select BOARD_EARLY_INIT_F |
| |
| config TARGET_ETHERNUT5 |
| bool "Ethernut5 board" |
| select AT91SAM9XE |
| |
| config TARGET_SNAPPER9260 |
| bool "Support snapper9260" |
| select AT91SAM9260 |
| select AT91_WANTS_COMMON_PHY |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_GURNARD |
| bool "Support gurnard" |
| select AT91SAM9G45 |
| select AT91_WANTS_COMMON_PHY |
| select BOARD_LATE_INIT |
| select DM |
| select DM_ETH |
| select DM_GPIO |
| select DM_SERIAL |
| select DM_SPI |
| select SPI |
| imply CMD_DM |
| |
| config TARGET_AT91SAM9261EK |
| bool "Atmel at91sam9261 reference board" |
| select AT91SAM9261 |
| select BOARD_EARLY_INIT_F |
| |
| config TARGET_PM9261 |
| bool "Ronetix pm9261 board" |
| select AT91SAM9261 |
| |
| config TARGET_AT91SAM9263EK |
| bool "Atmel at91sam9263 reference board" |
| select AT91SAM9263 |
| select BOARD_EARLY_INIT_F |
| |
| config TARGET_USB_A9263 |
| bool "Caloa USB A9260 board" |
| select AT91SAM9263 |
| select AT91_WANTS_COMMON_PHY |
| |
| config TARGET_PM9263 |
| bool "Ronetix pm9263 board" |
| select AT91SAM9263 |
| |
| config TARGET_AT91SAM9M10G45EK |
| bool "Atmel AT91SAM9M10G45-EK board" |
| select AT91SAM9M10G45 |
| select BOARD_EARLY_INIT_F |
| select SUPPORT_SPL |
| |
| config TARGET_PM9G45 |
| bool "Ronetix pm9g45 board" |
| select AT91SAM9G45 |
| |
| config TARGET_AT91SAM9N12EK |
| bool "Atmel AT91SAM9N12-EK board" |
| select AT91SAM9N12 |
| select BOARD_EARLY_INIT_F |
| select SUPPORT_SPL |
| |
| config TARGET_AT91SAM9RLEK |
| bool "Atmel at91sam9rl reference board" |
| select AT91SAM9RL |
| select BOARD_EARLY_INIT_F |
| |
| config TARGET_AT91SAM9X5EK |
| bool "Atmel AT91SAM9X5-EK board" |
| select AT91SAM9X5 |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| |
| config TARGET_GARDENA_SMART_GATEWAY_AT91SAM |
| bool "GARDENA smart Gateway (AT91SAM)" |
| select AT91SAM9X5 |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| |
| config TARGET_SAM9X60EK |
| bool "SAM9X60-EK board" |
| select SAM9X60 |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| |
| config TARGET_SAM9X60_CURIOSITY |
| bool "SAM9X60 CURIOSITY board" |
| select SAM9X60 |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| |
| config TARGET_SAMA5D2_PTC_EK |
| bool "SAMA5D2 PTC EK board" |
| select BOARD_EARLY_INIT_F |
| select SAMA5D2 |
| select BOARD_LATE_INIT |
| |
| config TARGET_SAMA5D2_XPLAINED |
| bool "SAMA5D2 Xplained board" |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| select SAMA5D2 |
| select SUPPORT_SPL |
| |
| config TARGET_SAMA5D27_SOM1_EK |
| bool "SAMA5D27 SOM1 EK board" |
| select SAMA5D2 |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| select CPU_V7A |
| select SUPPORT_SPL |
| select ATMEL_SFR |
| help |
| The SAMA5D27 SOM1 embeds SAMA5D2 SiP(System in Package), |
| a 64Mbit QSPI flash, KSZ8081 Phy and a Mac-address EEPROM |
| 24AA02E48. The SAMA5D2 SiP integrates the ARM Cortex-A5 |
| processor-based SAMA5D2 MPU with up to 1 Gbit DDR2-SDRAM |
| in a single package. |
| |
| config TARGET_SAMA5D27_WLSOM1_EK |
| bool "SAMA5D27 WLSOM1 EK board" |
| select SAMA5D2 |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| select CPU_V7A |
| select SUPPORT_SPL |
| help |
| The SAMA5D27 WLSOM1 embeds SAMA5D2 SiP (System in Package), |
| a 64Mbit QSPI flash with Mac-address, KSZ8081 Phy. A wireless |
| module providing bluetooth and wifi is also embedded. |
| The SAMA5D2 SiP integrates the ARM Cortex-A5 |
| processor-based SAMA5D2 MPU with 2 Gbit LPDDR2-SDRAM |
| in a single package. |
| |
| config TARGET_SAMA5D2_ICP |
| bool "SAMA5D2 Industrial Connectivity Platform (ICP)" |
| select SAMA5D2 |
| select SUPPORT_SPL |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| help |
| The SAMA5D2 ICP embeds SAMA5D27 rev. C SoC, together with |
| a 64Mbit QSPI flash, 3xMikrobus connectors, 4xUSB , |
| EtherCat and WILC3000 devices on board. |
| |
| config TARGET_SAMA5D3_XPLAINED |
| bool "SAMA5D3 Xplained board" |
| select BOARD_EARLY_INIT_F |
| select SAMA5D3 |
| select SUPPORT_SPL |
| select BOARD_LATE_INIT |
| |
| config TARGET_SAMA5D3XEK |
| bool "SAMA5D3X-EK board" |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| select SAMA5D3 |
| select SUPPORT_SPL |
| |
| config TARGET_SAMA5D4_XPLAINED |
| bool "SAMA5D4 Xplained board" |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| select SAMA5D4 |
| select SUPPORT_SPL |
| |
| config TARGET_SAMA5D4EK |
| bool "SAMA5D4 Evaluation Kit" |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| select SAMA5D4 |
| select SUPPORT_SPL |
| |
| config TARGET_MEESC |
| bool "Support meesc" |
| select AT91SAM9263 |
| |
| config TARGET_CORVUS |
| bool "Support corvus" |
| select AT91SAM9M10G45 |
| select AT91_WANTS_COMMON_PHY |
| select DM |
| select DM_ETH |
| select DM_GPIO |
| select DM_SERIAL |
| select SUPPORT_SPL |
| imply CMD_DM |
| |
| config TARGET_SAMA7G5EK |
| bool "SAMA7G5 EK board" |
| select SAMA7G5 |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| |
| |
| config TARGET_TAURUS |
| bool "Support taurus" |
| select AT91SAM9G20 |
| select AT91_WANTS_COMMON_PHY |
| select DM |
| select DM_ETH |
| select DM_GPIO |
| select DM_SERIAL |
| select DM_SPI |
| select SPI |
| select SUPPORT_SPL |
| imply CMD_DM |
| |
| config TARGET_SMARTWEB |
| bool "Support smartweb" |
| select AT91SAM9260 |
| select AT91_WANTS_COMMON_PHY |
| select DM |
| select DM_ETH |
| select DM_GPIO |
| select DM_SERIAL |
| select SUPPORT_SPL |
| imply CMD_DM |
| |
| config TARGET_VINCO |
| bool "Support VINCO" |
| select DM |
| select DM_SPI |
| select SAMA5D4 |
| select SPI |
| select SUPPORT_SPL |
| imply CMD_DM |
| |
| endchoice |
| |
| config ATMEL_SFR |
| bool |
| |
| config AT91RESET_EXTRST |
| bool |
| |
| config SYS_SOC |
| default "at91" |
| |
| config AT91_EFLASH |
| bool "Support AT91 flash driver" |
| depends on AT91SAM9XE |
| select USE_SYS_MAX_FLASH_BANKS |
| help |
| Enable the driver for the embedded flash used in the Atmel |
| AT91SAM9XE devices. |
| |
| config EFLASH_PROTSECTORS |
| int "Number of flash sectors to protect from erasing" |
| depends on AT91_EFLASH |
| help |
| If non-zero, this will be the number of sectors of the flash to disallow |
| U-Boot to ease, starting from the beginning of flash. |
| |
| config AT91_GPIO_PULLUP |
| bool "Keep pullups on peripheral pins" |
| depends on CPU_ARM926EJS |
| |
| config ATMEL_LEGACY |
| bool "Legacy GPIO support" |
| |
| config AT91_WANTS_COMMON_PHY |
| bool |
| |
| source "board/atmel/at91sam9260ek/Kconfig" |
| source "board/atmel/at91sam9261ek/Kconfig" |
| source "board/atmel/at91sam9263ek/Kconfig" |
| source "board/atmel/at91sam9m10g45ek/Kconfig" |
| source "board/atmel/at91sam9n12ek/Kconfig" |
| source "board/atmel/at91sam9rlek/Kconfig" |
| source "board/atmel/at91sam9x5ek/Kconfig" |
| source "board/atmel/sam9x60ek/Kconfig" |
| source "board/atmel/sam9x60_curiosity/Kconfig" |
| source "board/atmel/sama7g5ek/Kconfig" |
| source "board/atmel/sama5d2_ptc_ek/Kconfig" |
| source "board/atmel/sama5d2_xplained/Kconfig" |
| source "board/atmel/sama5d27_som1_ek/Kconfig" |
| source "board/atmel/sama5d27_wlsom1_ek/Kconfig" |
| source "board/atmel/sama5d2_icp/Kconfig" |
| source "board/atmel/sama5d3_xplained/Kconfig" |
| source "board/atmel/sama5d3xek/Kconfig" |
| source "board/atmel/sama5d4_xplained/Kconfig" |
| source "board/atmel/sama5d4ek/Kconfig" |
| source "board/bluewater/gurnard/Kconfig" |
| source "board/bluewater/snapper9260/Kconfig" |
| source "board/calao/usb_a9263/Kconfig" |
| source "board/egnite/ethernut5/Kconfig" |
| source "board/esd/meesc/Kconfig" |
| source "board/gardena/smart-gateway-at91sam/Kconfig" |
| source "board/l+g/vinco/Kconfig" |
| source "board/ronetix/pm9261/Kconfig" |
| source "board/ronetix/pm9263/Kconfig" |
| source "board/ronetix/pm9g45/Kconfig" |
| source "board/siemens/corvus/Kconfig" |
| source "board/siemens/taurus/Kconfig" |
| source "board/siemens/smartweb/Kconfig" |
| |
| endif |