fastboot: Add default fastboot_set_reboot_flag implementation
Default implementation of fastboot_set_reboot_flag function that depends
on "bcb" commands could be used in general case if there are no need to
make any platform-specific implementation, otherwise it could be
disabled via Kconfig option FASTBOOT_USE_BCB_SET_REBOOT_FLAG.
Please note that FASTBOOT_USE_BCB_SET_REBOOT_FLAG is mutually exclusive
with some platforms which already have their own implementation of this
function.
Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index d4436df..4352ba6 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -165,6 +165,18 @@
relies on the env variable partitions to contain the list of
partitions as required by the gpt command.
+config FASTBOOT_USE_BCB_SET_REBOOT_FLAG
+ bool "Use BCB by fastboot to set boot reason"
+ depends on CMD_BCB && !ARCH_MESON && !ARCH_ROCKCHIP && !TARGET_KC1 && \
+ !TARGET_SNIPER && !TARGET_AM57XX_EVM && !TARGET_DRA7XX_EVM
+ default y
+ help
+ Fastboot could implement setting of reboot reason in a generic fashion
+ via BCB commands. BCB commands are able to write reboot reason into
+ command field of boot control block. In general case it is sufficient
+ implementation if your platform supports BCB commands and doesn't
+ require any specific reboot reason handling.
+
endif # FASTBOOT
endmenu
diff --git a/drivers/fastboot/Makefile b/drivers/fastboot/Makefile
index 048af5a..2b2c390 100644
--- a/drivers/fastboot/Makefile
+++ b/drivers/fastboot/Makefile
@@ -5,3 +5,4 @@
obj-y += fb_command.o
obj-$(CONFIG_FASTBOOT_FLASH_MMC) += fb_mmc.o
obj-$(CONFIG_FASTBOOT_FLASH_NAND) += fb_nand.o
+obj-$(CONFIG_FASTBOOT_USE_BCB_SET_REBOOT_FLAG) += fb_bcb_impl.o
diff --git a/drivers/fastboot/fb_bcb_impl.c b/drivers/fastboot/fb_bcb_impl.c
new file mode 100644
index 0000000..89ec360
--- /dev/null
+++ b/drivers/fastboot/fb_bcb_impl.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 GlobalLogic.
+ * Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
+ */
+
+#include <common.h>
+#include <fastboot.h>
+
+/**
+ * fastboot_set_reboot_flag() - Set flag to indicate reboot-bootloader
+ *
+ * Set flag which indicates that we should reboot into the bootloader
+ * following the reboot that fastboot executes after this function.
+ *
+ * This function should be overridden in your board file with one
+ * which sets whatever flag your board specific Android bootloader flow
+ * requires in order to re-enter the bootloader.
+ */
+int fastboot_set_reboot_flag(enum fastboot_reboot_reason reason)
+{
+ char cmd[64];
+
+ if (reason >= FASTBOOT_REBOOT_REASONS_COUNT)
+ return -EINVAL;
+
+ snprintf(cmd, sizeof(cmd), "bcb load %d misc",
+ CONFIG_FASTBOOT_FLASH_MMC_DEV);
+
+ if (run_command(cmd, 0))
+ return -ENODEV;
+
+ snprintf(cmd, sizeof(cmd), "bcb set command %s",
+ fastboot_boot_cmds[reason]);
+
+ if (run_command(cmd, 0))
+ return -ENOEXEC;
+
+ if (run_command("bcb store", 0))
+ return -EIO;
+
+ return 0;
+}