powerpc: T2080, T2081: Remove macro CONFIG_PPC_T2080 and CONFIG_PPC_T2081
Use CONFIG_ARCH_T2080 and CONFIG_ARCH_T2081 instead.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index e4a7b88..c1003a3 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -244,16 +244,19 @@
config TARGET_T2080QDS
bool "Support T2080QDS"
+ select ARCH_T2080
select SUPPORT_SPL
select PHYS_64BIT
config TARGET_T2080RDB
bool "Support T2080RDB"
+ select ARCH_T2080
select SUPPORT_SPL
select PHYS_64BIT
config TARGET_T2081QDS
bool "Support T2081QDS"
+ select ARCH_T2081
select SUPPORT_SPL
select PHYS_64BIT
@@ -400,6 +403,12 @@
config ARCH_T1042
bool
+config ARCH_T2080
+ bool
+
+config ARCH_T2081
+ bool
+
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 375a905..f74018b 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -55,8 +55,8 @@
obj-$(CONFIG_PPC_T1022) += t1040_ids.o
obj-$(CONFIG_ARCH_T1023) += t1024_ids.o
obj-$(CONFIG_ARCH_T1024) += t1024_ids.o
-obj-$(CONFIG_PPC_T2080) += t2080_ids.o
-obj-$(CONFIG_PPC_T2081) += t2080_ids.o
+obj-$(CONFIG_ARCH_T2080) += t2080_ids.o
+obj-$(CONFIG_ARCH_T2081) += t2080_ids.o
obj-$(CONFIG_QE) += qe_io.o
@@ -98,8 +98,8 @@
obj-$(CONFIG_PPC_T1022) += t1040_serdes.o
obj-$(CONFIG_ARCH_T1023) += t1024_serdes.o
obj-$(CONFIG_ARCH_T1024) += t1024_serdes.o
-obj-$(CONFIG_PPC_T2080) += t2080_serdes.o
-obj-$(CONFIG_PPC_T2081) += t2080_serdes.o
+obj-$(CONFIG_ARCH_T2080) += t2080_serdes.o
+obj-$(CONFIG_ARCH_T2081) += t2080_serdes.o
obj-y += cpu.o
obj-y += cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index aaca15f..6bde60d 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -511,7 +511,7 @@
#define fdt_fixup_usb(x)
#endif
-#if defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T4240) || \
+#if defined(CONFIG_ARCH_T2080) || defined(CONFIG_PPC_T4240) || \
defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080)
void fdt_fixup_dma3(void *blob)
{
@@ -520,7 +520,7 @@
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300)
-#if defined(CONFIG_PPC_T2080)
+#if defined(CONFIG_ARCH_T2080)
u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 18333ce..4de5dcf 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -131,8 +131,8 @@
* T2080 rev 1.1 and later also use half mem_pll comparing with rev 1.0
*/
#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \
- defined(CONFIG_PPC_T4080) || defined(CONFIG_PPC_T2080) || \
- defined(CONFIG_PPC_T2081)
+ defined(CONFIG_PPC_T4080) || defined(CONFIG_ARCH_T2080) || \
+ defined(CONFIG_ARCH_T2081)
svr = get_svr();
switch (SVR_SOC_VER(svr)) {
case SVR_T4240:
@@ -203,7 +203,7 @@
#endif
#if defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) || \
- defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
+ defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
#define FM1_CLK_SEL 0xe0000000
#define FM1_CLK_SHIFT 29
#elif defined(CONFIG_ARCH_T1024) || defined(CONFIG_ARCH_T1023)
@@ -456,7 +456,7 @@
#endif
#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
-#if defined(CONFIG_PPC_T2080)
+#if defined(CONFIG_ARCH_T2080)
#define ESDHC_CLK_SEL 0x00000007
#define ESDHC_CLK_SHIFT 0
#define ESDHC_CLK_RCWSR 15
@@ -480,7 +480,7 @@
case 4:
sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 4;
break;
-#if defined(CONFIG_PPC_T2080)
+#if defined(CONFIG_ARCH_T2080)
case 5:
sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK];
break;
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
index c65f41d..fc63fe3 100644
--- a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
@@ -161,7 +161,7 @@
{}
};
-#ifndef CONFIG_PPC_T2081
+#ifndef CONFIG_ARCH_T2081
static const struct serdes_config serdes2_cfg_tbl[] = {
/* SerDes 2 */
{0x1F, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
@@ -181,7 +181,7 @@
static const struct serdes_config *serdes_cfg_tbl[] = {
serdes1_cfg_tbl,
-#ifndef CONFIG_PPC_T2081
+#ifndef CONFIG_ARCH_T2081
serdes2_cfg_tbl,
#endif
};