dm: at91: Add driver model support for the serial driver
Add driver model support while retaining the existing legacy code. This
allows the driver to support boards that have converted to driver model
as well as those that have not.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index ce36e99..4fe992b 100644
--- a/drivers/serial/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
@@ -7,11 +7,16 @@
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
#include <watchdog.h>
#include <serial.h>
#include <linux/compiler.h>
#include <asm/io.h>
+#ifdef CONFIG_DM_SERIAL
+#include <asm/arch/atmel_serial.h>
+#endif
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
@@ -60,6 +65,7 @@
__udelay(100);
}
+#ifndef CONFIG_DM_SERIAL
static void atmel_serial_setbrg(void)
{
atmel_serial_setbrg_internal((atmel_usart3_t *)CONFIG_USART_BASE,
@@ -123,3 +129,81 @@
{
return &atmel_serial_drv;
}
+#endif
+
+#ifdef CONFIG_DM_SERIAL
+
+struct atmel_serial_priv {
+ atmel_usart3_t *usart;
+};
+
+int atmel_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ atmel_serial_setbrg_internal(priv->usart, 0 /* ignored */, baudrate);
+ atmel_serial_activate(priv->usart);
+
+ return 0;
+}
+
+static int atmel_serial_getc(struct udevice *dev)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ if (!(readl(&priv->usart->csr) & USART3_BIT(RXRDY)))
+ return -EAGAIN;
+
+ return readl(&priv->usart->rhr);
+}
+
+static int atmel_serial_putc(struct udevice *dev, const char ch)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ if (!(readl(&priv->usart->csr) & USART3_BIT(TXRDY)))
+ return -EAGAIN;
+
+ writel(ch, &priv->usart->thr);
+
+ return 0;
+}
+
+static int atmel_serial_pending(struct udevice *dev, bool input)
+{
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+ uint32_t csr = readl(&priv->usart->csr);
+
+ if (input)
+ return csr & USART3_BIT(RXRDY) ? 1 : 0;
+ else
+ return csr & USART3_BIT(TXEMPTY) ? 0 : 1;
+}
+
+static const struct dm_serial_ops atmel_serial_ops = {
+ .putc = atmel_serial_putc,
+ .pending = atmel_serial_pending,
+ .getc = atmel_serial_getc,
+ .setbrg = atmel_serial_setbrg,
+};
+
+static int atmel_serial_probe(struct udevice *dev)
+{
+ struct atmel_serial_platdata *plat = dev->platdata;
+ struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+ priv->usart = (atmel_usart3_t *)plat->base_addr;
+ atmel_serial_init_internal(priv->usart);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(serial_atmel) = {
+ .name = "serial_atmel",
+ .id = UCLASS_SERIAL,
+ .probe = atmel_serial_probe,
+ .ops = &atmel_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+ .priv_auto_alloc_size = sizeof(struct atmel_serial_priv),
+};
+#endif